Home | Previous Page | Next Page   Fault Tolerance > Using High-Availability Data Replication (Enterprise/Workgroup Editions) > Performing Basic Administration Tasks >

Changing Database Server Configuration Parameters

Some of the configuration parameters must be set to the same value on both database servers in the replication pair (as listed under Meeting Database Server Configuration Requirements.) Other Dynamic Server configuration parameters can be set to different values.

To make changes to ONCONFIG files
  1. Bring each database server offline with the onmode -k option. If DRAUTO is set to RETAIN_TYPE or REVERSE_TYPE, you can more easily bring the secondary database server off-line first.
  2. Change the parameters on each database server.
  3. Starting with the last database server that you brought offline, bring each database server back online.

    For example, if you brought the secondary database server offline last, bring the secondary database server online first. Table 41 and Table 41 list the procedures for bringing the primary and secondary database servers back online.

If the configuration parameter does not need to have the same value on each database server in the replication pair, you can change the value on the primary or secondary database server individually.

Home | [ Top of Page | Previous Page | Next Page | Contents | Index ]