Advise on how to migrate IDS 9.4 FC4 from HP-PARIS
A user asked how to move IDS 9.40.FC4 plus I4GL/ISQL 7.32 from HP-UX PA-RISC to Itanium: whether dbexport/dbimport was needed, whether 4GL code must be recompiled, and known issues. Replies said PA-RISC-to-Itanium is a homogeneous migration, so no unload/reload is required: just make the same raw devices/SAN volumes available to the Itanium machine (vgimport, symlinks, or dd/network copy), stop IDS on the old box and start the Itanium binaries. Advice was to use a newer 9.40 fixpack (FC6/FC7) for performance, do any IDS 10 upgrade as a separate second step, and recompile 4GL applications with the new-platform binaries. No post-migration feedback was posted.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
Hi all,
We will migrating soon from PA-RISC to ITANIUM, we have:
HP-UX ... B.11.11 U 9000/800
IDS 9.40.FC4
ISQL 7.32.FC2 (Dev. & Runtime)
4GL-RDS Version 7.32.FC2
I4GL(Debugger) 7.32.FC2
So:
- Are there any know issues with the versions above on ITANIUM? (FC3?)
- Do we have to recompile forms, 4gls? (I suppose we don't have to)
- Any one knows related information (links, docs, etc.) related to PA-RISC to
ITANIUM migration?
- Do I need necessarily have to do a dbexport/dbimport or there are faster
ways to do it?
If it is important: we have a SAN (Eva3000) so that data is not physical
attached to database server.
Any recomendation would be very appreciated.
A.
Hi,
a HP-UX PA-Risc to Itanium migration is a 'homogenous' migration!
You don't need to export/import your databases. In a SAN environment
you have three options:
- make the database raw devices visible on the new Itanium machine
(vgimport, hopefully no name conflicts, symbolic links for raw devices)
Afterwards just stop the database on PA-Risc and start on Itanium
- If you want to use new diskspace:
Same as above, but copy the raw devices with dd to the new lvols
- OR (without SAN reconfiguration) copy the data over the LAN (remote
shell commands, depending on LAN speed with intermediate gzip/gunzip)
Versions: I would suggest the newest version - should be FC6 or FC7 .
There have been performance issues with older versions.
If don't have experience with migrating 4GL/applications etc.
PA-Risc codes/programs are supposed to run on Itanium hardware
but I'm not sure if it is a good idea if you have complex
applications (or performance demanding ones).
E.g. the IDS (PA-Risc) himself doesn't run on Itanium correctly :-)
Regards,
Andreas
>
-------------------------------------------
SPAR Oesterreichische Warenhandels-AG
Hauptzentrale
Europastrasse 3
A - 5015 Salzburg
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: forum.subscriber@iiug.org [mailto:forum.subscriber@iiug.org]Im
> Auftrag von ANGEL M. RU....
> Gesendet: Freitag, 12. August 2005 22:07
> An: ids@iiug.org
> Betreff: Advise on how to migrate IDS 9.4 FC4 from HP-PARIS [5609]
>
>
> Hi all,
>
> We will migrating soon from PA-RISC to ITANIUM, we have:
>
> HP-UX ... B.11.11 U 9000/800
> IDS 9.40.FC4
> ISQL 7.32.FC2 (Dev. & Runtime)
> 4GL-RDS Version 7.32.FC2
> I4GL(Debugger) 7.32.FC2
>
> So:
>
> - Are there any know issues with the versions above on ITANIUM? (FC3?)
> - Do we have to recompile forms, 4gls? (I suppose we don't have to)
> - Any one knows related information (links, docs, etc.)
> related to PA-RISC to ITANIUM migration?
> - Do I need necessarily have to do a dbexport/dbimport or
> there are faster ways to do it?
>
> If it is important: we have a SAN (Eva3000) so that data is
> not physical attached to database server.
>
> Any recomendation would be very appreciated.
>
>
> A.
>
>
>
Excellent !
I specially like this:
> - make the database raw devices visible on the new
> Itanium machine (vgimport, hopefully no name
> conflicts, symbolic links for raw devices)
> Afterwards just stop the database on PA-Risc
> and start on Itanium.
But since we are migrating in the same machine then there is no need to import
the raw devices, isn't it?
I mean:
- Deatach the raw devices
- Upgrade PA-RISC to ITANIUM (Including IDS 9.4FC4)
- Attach raw devices
- Start the engine
Would do the migration?
Other question:
Since we have 9.4FC4 I think there is no problem moving to 9.4FC[6|7], but if
we plan to go with IDS10 would the procedure be the same?
J.
PD: IDS.10.0.FC3 for HP-UX Itanium is available?
-----Original Message-----
From: "Andreas.KUT...." <andreas.kutsche@spar.at>
To: ids@iiug.org
Date: Sat, 13 Aug 2005 13:19:10 -0400 (EDT)
Subject: AW: Advise on how to migrate IDS 9.4 FC4 from HP-PARIS [5611]
Hi,
a HP-UX PA-Risc to Itanium migration is a 'homogenous' migration!
You don't need to export/import your databases. In a SAN environment
you have three options:
- make the database raw devices visible on the new Itanium machine
(vgimport, hopefully no name conflicts, symbolic links for raw devices)
Afterwards just stop the database on PA-Risc and start on Itanium
- If you want to use new diskspace:
Same as above, but copy the raw devices with dd to the new lvols
- OR (without SAN reconfiguration) copy the data over the LAN (remote
shell commands, depending on LAN speed with intermediate gzip/gunzip)
Versions: I would suggest the newest version - should be FC6 or FC7 .
There have been performance issues with older versions.
If don't have experience with migrating 4GL/applications etc.
PA-Risc codes/programs are supposed to run on Itanium hardware
but I'm not sure if it is a good idea if you have complex
applications (or performance demanding ones).
E.g. the IDS (PA-Risc) himself doesn't run on Itanium correctly :-)
Regards,
Andreas
>
-------------------------------------------
SPAR Oesterreichische Warenhandels-AG
Hauptzentrale
Europastrasse 3
A - 5015 Salzburg
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: forum.subscriber@iiug.org [mailto:forum.subscriber@iiug.org]Im
> Auftrag von ANGEL M. RU....
> Gesendet: Freitag, 12. August 2005 22:07
> An: ids@iiug.org
> Betreff: Advise on how to migrate IDS 9.4 FC4 from HP-PARIS [5609]
>
>
> Hi all,
>
> We will migrating soon from PA-RISC to ITANIUM, we have:
>
> HP-UX ... B.11.11 U 9000/800
> IDS 9.40.FC4
> ISQL 7.32.FC2 (Dev. & Runtime)
> 4GL-RDS Version 7.32.FC2
> I4GL(Debugger) 7.32.FC2
>
> So:
>
> - Are there any know issues with the versions above on ITANIUM? (FC3?)
> - Do we have to recompile forms, 4gls? (I suppose we don't have to)
> - Any one knows related information (links, docs, etc.)
> related to PA-RISC to ITANIUM migration?
> - Do I need necessarily have to do a dbexport/dbimport or
> there are faster ways to do it?
>
> If it is important: we have a SAN (Eva3000) so that data is
> not physical attached to database server.
>
> Any recomendation would be very appreciated.
>
>
> A.
>
>
>
Jean Sagi
jeansagi@myrealbox.com
jeansagi@gmail.com
Hello,
you are right, when upgrading the machine there should be no need to
move the raw devices. I think you don't need to detach/attach them even -
but you should discuss that with an OS expert - maybe you set them
read-only just to be sure.
For IDS10: We haven't migrated to IDS10 until now. I think you could do
the migration in one step. But I would prefer to split it into two parts:
1) PA-Risc to Itanium: upgrade machine, start/stop IDS 9.4 with Itanium
binaries
2) 9.4 to 10.0: on the upgraded machine do a normal IDS upgrade
And I would prefer to wait a few days between 1) and 2) !-)
Regards,
Andreas Kutsche
>
-------------------------------------------
SPAR Oesterreichische Warenhandels-AG
Hauptzentrale
Europastrasse 3
A - 5015 Salzburg
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: Jean Sagi [mailto:jeansagi@myrealbox.com]
> Gesendet: Samstag, 13. August 2005 20:16
> An: KUTSCHE Andreas (HZ422)
> Cc: ids@iiug.org; aruiz@fcvl.org
> Betreff: Re: AW: Advise on how to migrate IDS 9.4 FC4 from HP-PARIS
> [5611]
>
>
> Excellent !
>
> I specially like this:
>
> > - make the database raw devices visible on the new
> > Itanium machine (vgimport, hopefully no name
> > conflicts, symbolic links for raw devices)
> > Afterwards just stop the database on PA-Risc
> > and start on Itanium.
>
> But since we are migrating in the same machine then there is
> no need to import the raw devices, isn't it?
>
> I mean:
> - Deatach the raw devices
> - Upgrade PA-RISC to ITANIUM (Including IDS 9.4FC4)
> - Attach raw devices
> - Start the engine
>
> Would do the migration?
>
> Other question:
>
> Since we have 9.4FC4 I think there is no problem moving to
> 9.4FC[6|7], but if we plan to go with IDS10 would the
> procedure be the same?
>
>
> J.
>
> PD: IDS.10.0.FC3 for HP-UX Itanium is available?
>
>
>
>
>
> -----Original Message-----
> From: "Andreas.KUT...." <andreas.kutsche@spar.at>
> To: ids@iiug.org
> Date: Sat, 13 Aug 2005 13:19:10 -0400 (EDT)
> Subject: AW: Advise on how to migrate IDS 9.4 FC4 from
> HP-PARIS [5611]
>
> Hi,
>
> a HP-UX PA-Risc to Itanium migration is a 'homogenous' migration!
> You don't need to export/import your databases. In a SAN environment
> you have three options:
> - make the database raw devices visible on the new Itanium machine
> (vgimport, hopefully no name conflicts, symbolic links for
> raw devices)
> Afterwards just stop the database on PA-Risc and start on Itanium
> - If you want to use new diskspace:
> Same as above, but copy the raw devices with dd to the new lvols
> - OR (without SAN reconfiguration) copy the data over the LAN (remote
> shell commands, depending on LAN speed with intermediate
> gzip/gunzip)
>
> Versions: I would suggest the newest version - should be FC6 or FC7 .
> There have been performance issues with older versions.
>
> If don't have experience with migrating 4GL/applications etc.
> PA-Risc codes/programs are supposed to run on Itanium hardware
> but I'm not sure if it is a good idea if you have complex
> applications (or performance demanding ones).
> E.g. the IDS (PA-Risc) himself doesn't run on Itanium correctly :-)
>
> Regards,
> Andreas
>
> >
> -------------------------------------------
>
> SPAR Oesterreichische Warenhandels-AG
> Hauptzentrale
> Europastrasse 3
> A - 5015 Salzburg
>
> Tel: +43 662 4470 24223
> Mobile: +43 664 6259575
> E-Mail: Andreas.KUTSCHE@spar.at
> Internet: http://www.spar.at
> -------------------------------------------
> -----Ursprüngliche Nachricht-----
>
> > Von: forum.subscriber@iiug.org [mailto:forum.subscriber@iiug.org]Im
> > Auftrag von ANGEL M. RU....
> > Gesendet: Freitag, 12. August 2005 22:07
> > An: ids@iiug.org
> > Betreff: Advise on how to migrate IDS 9.4 FC4 from HP-PARIS [5609]
> >
> >
> > Hi all,
> >
> > We will migrating soon from PA-RISC to ITANIUM, we have:
> >
> > HP-UX ... B.11.11 U 9000/800
> > IDS 9.40.FC4
> > ISQL 7.32.FC2 (Dev. & Runtime)
> > 4GL-RDS Version 7.32.FC2
> > I4GL(Debugger) 7.32.FC2
> >
> > So:
> >
> > - Are there any know issues with the versions above on
> ITANIUM? (FC3?)
> > - Do we have to recompile forms, 4gls? (I suppose we don't have to)
> > - Any one knows related information (links, docs, etc.)
> > related to PA-RISC to ITANIUM migration?
> > - Do I need necessarily have to do a dbexport/dbimport or
> > there are faster ways to do it?
> >
> > If it is important: we have a SAN (Eva3000) so that data is
> > not physical attached to database server.
> >
> > Any recomendation would be very appreciated.
> >
> >
> > A.
> >
> >
> >
>
>
>
>
> Jean Sagi
> jeansagi@myrealbox.com
> jeansagi@gmail.com
>
Hi,
If you application is written in 4GL and OS version is
change. Then 4GL application requires re-complie on
new OS.
Thanks
Anup
--- "Andreas.KUT...." <andreas.kutsche@spar.at> wrote:
> Hello,
>
> you are right, when upgrading the machine there
> should be no need to
> move the raw devices. I think you don't need to
> detach/attach them even -
> but you should discuss that with an OS expert -
> maybe you set them
> read-only just to be sure.
>
> For IDS10: We haven't migrated to IDS10 until now. I
> think you could do
> the migration in one step. But I would prefer to
> split it into two parts:
> 1) PA-Risc to Itanium: upgrade machine, start/stop
> IDS 9.4 with Itanium binaries
> 2) 9.4 to 10.0: on the upgraded machine do a normal
> IDS upgrade
> And I would prefer to wait a few days between 1) and
> 2) !-)
>
> Regards,
> Andreas Kutsche
>
> >
> -------------------------------------------
> SPAR Oesterreichische Warenhandels-AG
> Hauptzentrale
> Europastrasse 3
> A - 5015 Salzburg
>
> Tel: +43 662 4470 24223
> Mobile: +43 664 6259575
> E-Mail: Andreas.KUTSCHE@spar.at
> Internet: http://www.spar.at
> -------------------------------------------
> -----Ursprüngliche Nachricht-----
>
> > Von: Jean Sagi [mailto:jeansagi@myrealbox.com]
> > Gesendet: Samstag, 13. August 2005 20:16
> > An: KUTSCHE Andreas (HZ422)
> > Cc: ids@iiug.org; aruiz@fcvl.org
> > Betreff: Re: AW: Advise on how to migrate IDS 9.4
> FC4 from HP-PARIS
> > [5611]
> >
> >
> > Excellent !
> >
> > I specially like this:
> >
> > > - make the database raw devices visible on the
> new
> > > Itanium machine (vgimport, hopefully no name
> > > conflicts, symbolic links for raw devices)
> > > Afterwards just stop the database on PA-Risc
> > > and start on Itanium.
> >
> > But since we are migrating in the same machine
> then there is
> > no need to import the raw devices, isn't it?
> >
> > I mean:
> > - Deatach the raw devices
> > - Upgrade PA-RISC to ITANIUM (Including IDS
> 9.4FC4)
> > - Attach raw devices
> > - Start the engine
> >
> > Would do the migration?
> >
> > Other question:
> >
> > Since we have 9.4FC4 I think there is no problem
> moving to
> > 9.4FC[6|7], but if we plan to go with IDS10 would
> the
> > procedure be the same?
> >
> >
> > J.
> >
> > PD: IDS.10.0.FC3 for HP-UX Itanium is available?
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: "Andreas.KUT...." <andreas.kutsche@spar.at>
> > To: ids@iiug.org
> > Date: Sat, 13 Aug 2005 13:19:10 -0400 (EDT)
> > Subject: AW: Advise on how to migrate IDS 9.4 FC4
> from
> > HP-PARIS [5611]
> >
> > Hi,
> >
> > a HP-UX PA-Risc to Itanium migration is a
> 'homogenous' migration!
> > You don't need to export/import your databases. In
> a SAN environment
> > you have three options:
> > - make the database raw devices visible on the new
> Itanium machine
> > (vgimport, hopefully no name conflicts, symbolic
> links for
> > raw devices)
> > Afterwards just stop the database on PA-Risc and
> start on Itanium
> > - If you want to use new diskspace:
> > Same as above, but copy the raw devices with dd
> to the new lvols
> > - OR (without SAN reconfiguration) copy the data
> over the LAN (remote
> > shell commands, depending on LAN speed with
> intermediate
> > gzip/gunzip)
> >
> > Versions: I would suggest the newest version -
> should be FC6 or FC7 .
> > There have been performance issues with older
> versions.
> >
> > If don't have experience with migrating
> 4GL/applications etc.
> > PA-Risc codes/programs are supposed to run on
> Itanium hardware
> > but I'm not sure if it is a good idea if you have
> complex
> > applications (or performance demanding ones).
> > E.g. the IDS (PA-Risc) himself doesn't run on
> Itanium correctly :-)
> >
> > Regards,
> > Andreas
> >
> > >
> > -------------------------------------------
> >
> > SPAR Oesterreichische Warenhandels-AG
> > Hauptzentrale
> > Europastrasse 3
> > A - 5015 Salzburg
> >
> > Tel: +43 662 4470 24223
> > Mobile: +43 664 6259575
> > E-Mail: Andreas.KUTSCHE@spar.at
> > Internet: http://www.spar.at
> > -------------------------------------------
> > -----Ursprüngliche Nachricht-----
> >
> > > Von: forum.subscriber@iiug.org
> [mailto:forum.subscriber@iiug.org]Im
> > > Auftrag von ANGEL M. RU....
> > > Gesendet: Freitag, 12. August 2005 22:07
> > > An: ids@iiug.org
> > > Betreff: Advise on how to migrate IDS 9.4 FC4
> from HP-PARIS [5609]
> > >
> > >
> > > Hi all,
> > >
> > > We will migrating soon from PA-RISC to ITANIUM,
> we have:
> > >
> > > HP-UX ... B.11.11 U 9000/800
> > > IDS 9.40.FC4
> > > ISQL 7.32.FC2 (Dev. & Runtime)
> > > 4GL-RDS Version 7.32.FC2
> > > I4GL(Debugger) 7.32.FC2
> > >
> > > So:
> > >
> > > - Are there any know issues with the versions
> above on
> > ITANIUM? (FC3?)
> > > - Do we have to recompile forms, 4gls? (I
> suppose we don't have to)
> > > - Any one knows related information (links,
> docs, etc.)
> > > related to PA-RISC to ITANIUM migration?
> > > - Do I need necessarily have to do a
> dbexport/dbimport or
> > > there are faster ways to do it?
> > >
> > > If it is important: we have a SAN (Eva3000) so
> that data is
> > > not physical attached to database server.
> > >
> > > Any recomendation would be very appreciated.
> > >
> > >
> > > A.
> > >
> > >
> > >
> >
> >
> >
> >
> > Jean Sagi
> > jeansagi@myrealbox.com
> > jeansagi@gmail.com
> >
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi all,
Thank you very much and very interesting, I want to have present its
commentaries
Thanks
Mensaje citado por Anup Agrawal <aanup@yahoo.com>:
> Hi,
>
> If you application is written in 4GL and OS version is
> change. Then 4GL application requires re-complie on
> new OS.
>
> Thanks
> Anup
>
>
> --- "Andreas.KUT...." <andreas.kutsche@spar.at> wrote:
>
> > Hello,
> >
> > you are right, when upgrading the machine there
> > should be no need to
> > move the raw devices. I think you don't need to
> > detach/attach them even -
> > but you should discuss that with an OS expert -
> > maybe you set them
> > read-only just to be sure.
> >
> > For IDS10: We haven't migrated to IDS10 until now. I
> > think you could do
> > the migration in one step. But I would prefer to
> > split it into two parts:
> > 1) PA-Risc to Itanium: upgrade machine, start/stop
> > IDS 9.4 with Itanium binaries
> > 2) 9.4 to 10.0: on the upgraded machine do a normal
> > IDS upgrade
> > And I would prefer to wait a few days between 1) and
> > 2) !-)
> >
> > Regards,
> > Andreas Kutsche
> >
> > >
> > -------------------------------------------
> > SPAR Oesterreichische Warenhandels-AG
> > Hauptzentrale
> > Europastrasse 3
> > A - 5015 Salzburg
> >
> > Tel: +43 662 4470 24223
> > Mobile: +43 664 6259575
> > E-Mail: Andreas.KUTSCHE@spar.at
> > Internet: http://www.spar.at
> > -------------------------------------------
> > -----Ursprüngliche Nachricht-----
> >
> > > Von: Jean Sagi [mailto:jeansagi@myrealbox.com]
> > > Gesendet: Samstag, 13. August 2005 20:16
> > > An: KUTSCHE Andreas (HZ422)
> > > Cc: ids@iiug.org; aruiz@fcvl.org
> > > Betreff: Re: AW: Advise on how to migrate IDS 9.4
> > FC4 from HP-PARIS
> > > [5611]
> > >
> > >
> > > Excellent !
> > >
> > > I specially like this:
> > >
> > > > - make the database raw devices visible on the
> > new
> > > > Itanium machine (vgimport, hopefully no name
> > > > conflicts, symbolic links for raw devices)
> > > > Afterwards just stop the database on PA-Risc
> > > > and start on Itanium.
> > >
> > > But since we are migrating in the same machine
> > then there is
> > > no need to import the raw devices, isn't it?
> > >
> > > I mean:
> > > - Deatach the raw devices
> > > - Upgrade PA-RISC to ITANIUM (Including IDS
> > 9.4FC4)
> > > - Attach raw devices
> > > - Start the engine
> > >
> > > Would do the migration?
> > >
> > > Other question:
> > >
> > > Since we have 9.4FC4 I think there is no problem
> > moving to
> > > 9.4FC[6|7], but if we plan to go with IDS10 would
> > the
> > > procedure be the same?
> > >
> > >
> > > J.
> > >
> > > PD: IDS.10.0.FC3 for HP-UX Itanium is available?
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: "Andreas.KUT...." <andreas.kutsche@spar.at>
> > > To: ids@iiug.org
> > > Date: Sat, 13 Aug 2005 13:19:10 -0400 (EDT)
> > > Subject: AW: Advise on how to migrate IDS 9.4 FC4
> > from
> > > HP-PARIS [5611]
> > >
> > > Hi,
> > >
> > > a HP-UX PA-Risc to Itanium migration is a
> > 'homogenous' migration!
> > > You don't need to export/import your databases. In
> > a SAN environment
> > > you have three options:
> > > - make the database raw devices visible on the new
> > Itanium machine
> > > (vgimport, hopefully no name conflicts, symbolic
> > links for
> > > raw devices)
> > > Afterwards just stop the database on PA-Risc and
> > start on Itanium
> > > - If you want to use new diskspace:
> > > Same as above, but copy the raw devices with dd
> > to the new lvols
> > > - OR (without SAN reconfiguration) copy the data
> > over the LAN (remote
> > > shell commands, depending on LAN speed with
> > intermediate
> > > gzip/gunzip)
> > >
> > > Versions: I would suggest the newest version -
> > should be FC6 or FC7 .
> > > There have been performance issues with older
> > versions.
> > >
> > > If don't have experience with migrating
> > 4GL/applications etc.
> > > PA-Risc codes/programs are supposed to run on
> > Itanium hardware
> > > but I'm not sure if it is a good idea if you have
> > complex
> > > applications (or performance demanding ones).
> > > E.g. the IDS (PA-Risc) himself doesn't run on
> > Itanium correctly :-)
> > >
> > > Regards,
> > > Andreas
> > >
> > > >
> > > -------------------------------------------
> > >
> > > SPAR Oesterreichische Warenhandels-AG
> > > Hauptzentrale
> > > Europastrasse 3
> > > A - 5015 Salzburg
> > >
> > > Tel: +43 662 4470 24223
> > > Mobile: +43 664 6259575
> > > E-Mail: Andreas.KUTSCHE@spar.at
> > > Internet: http://www.spar.at
> > > -------------------------------------------
> > > -----Ursprüngliche Nachricht-----
> > >
> > > > Von: forum.subscriber@iiug.org
> > [mailto:forum.subscriber@iiug.org]Im
> > > > Auftrag von ANGEL M. RU....
> > > > Gesendet: Freitag, 12. August 2005 22:07
> > > > An: ids@iiug.org
> > > > Betreff: Advise on how to migrate IDS 9.4 FC4
> > from HP-PARIS [5609]
> > > >
> > > >
> > > > Hi all,
> > > >
> > > > We will migrating soon from PA-RISC to ITANIUM,
> > we have:
> > > >
> > > > HP-UX ... B.11.11 U 9000/800
> > > > IDS 9.40.FC4
> > > > ISQL 7.32.FC2 (Dev. & Runtime)
> > > > 4GL-RDS Version 7.32.FC2
> > > > I4GL(Debugger) 7.32.FC2
> > > >
> > > > So:
> > > >
> > > > - Are there any know issues with the versions
> > above on
> > > ITANIUM? (FC3?)
> > > > - Do we have to recompile forms, 4gls? (I
> > suppose we don't have to)
> > > > - Any one knows related information (links,
> > docs, etc.)
> > > > related to PA-RISC to ITANIUM migration?
> > > > - Do I need necessarily have to do a
> > dbexport/dbimport or
> > > > there are faster ways to do it?
> > > >
> > > > If it is important: we have a SAN (Eva3000) so
> > that data is
> > > > not physical attached to database server.
> > > >
> > > > Any recomendation would be very appreciated.
> > > >
> > > >
> > > > A.
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > Jean Sagi
> > > jeansagi@myrealbox.com
> > > jeansagi@gmail.com
> > >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
Ingeniero:
Angel M. Ruiz Garzon
Fundacion Clinica Valle del Lili
Cra 98 # 18-49 Cali - Colombia
Tel 57 2 3317474 ext 3291.
Enviado a traves de Coomevamail.