RE: Configuring IDS 7.3 uc2 on SCO 5.0.4, (RAW Devices ?)

Peter In divvy you create chunks of the size you require and give them names you recognise. (say call one rootdbs). Do not create filesystems on these devices. You will have a file in /dev called rrootdbs (using memory here) of type c (the one you want) and another called rootdbs of type b. do a ls -l on these files. The only place I know of where to determine the size of a raw device is in divvy. Then link your Informix name to this device and change permissions, ownership. I do not see and SHM parameters in your tune file, particularly SHMMAX. Check the release notes on what parameters are required. [ENOMEM][12]: says not enough memory!! Check the release notes for SHMBASE, the failed initialisation says to put it at 0x80400000, not 0x80000000. Murray Wood -----Original Message----- From: Peter [SMTP:xyz-computers@dial.pipex.com] Sent: Wednesday, August 11, 1999 7:44 AM To: informix-list@iiug.org Subject: Configuring IDS 7.3 uc2 on SCO 5.0.4, (RAW Devices ?) Please can somebody help me with the installation of IDS 7.30 uc2 on Openserver 5.0.4. I have a P2-400, 256mb memory, 9gb hd with a 4 gig ntfs, 1.6gb sco, 2gb and 1gb available. I'm not sure if I've set up the raw devives properly. Fdisk 2gb and 1gb partition. divvy -m /dec/rhd01 & 02. Set up areas (mirror 25000 blocks, rootdbs 25000 blocks, chnk1-4. 8032 blocks have been reserved for the system) with NON FS option. This creates r"division name" in /dev. I have linked to this file, informix 660 etc. as it seems that it is the character kind and not the block (crw not brw). Where can I find info on raw devices (whch book in sco help)? Kernel params have been changed and relinked. I Keep getting this message. oninit: Fatal error in shared memory creation What is wrong ? Anybody have any ideas ..... Peter ONLINE.LOG Message when using 82000000 as shm base address 16:54:42 shmat: [EINVAL][22]: shared memory base address illegal 16:54:42 using 0x82040000, needs 0x80400000 16:54:42 mt_shm_init: can't create resident segment Message when using 80000000 as shm base address. 16:55:23 shmat: [ENOMEM][12]: out of available data space, check system MAXMEM 16:55:23 mt_shm_init: can't create resident segment (0x0 as base address also results in base address illegal). /etc/conf/cf.d/stune NODE "dana" EVDEVS 96 EVQUEUES 88 NSPTTYS 64 NUMSP 256 NSTREAM 4096 NHINODE 1024 TTHOG 4096 NCLIST 512 NSTREVENT 8192 NUMTIM 1104 NUMTRW 1104 NUMDEL 64 SECLUID 0 SECSTOPIO 1 SECCLEARID 1 SEMMNI 8192 SEMMNS 8192 SEMMAP 8192 SEMMNU 100 MAXUMEM 524287 ONCONFIG #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig # Description: Informix Dynamic Server Configuration Parameters # #************************************************************************** # Root Dbspace Configuration ROOTNAME rootdbs # Root dbspace name ROOTPATH /usr/informix/disk/rdsk/rootdbs # Path for device containing root dbspace ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) ROOTSIZE 20000 # Size of root dbspace (Kbytes) # Disk Mirroring Configuration Parameters MIRROR 1 # Mirroring flag (Yes = 1, No = 0) MIRRORPATH /usr/informix/disk/rdsk/mirrordbs # Path for device containing mirrored root MIRROROFFSET 0 # Offset into mirrored device (Kbytes) # Physical Log Configuration PHYSDBS rootdbs # Location (dbspace) of physical log PHYSFILE 1000 # Physical log file size (Kbytes) # Logical Log Configuration LOGFILES 6 # Number of logical log files LOGSIZE 1000 # Logical log size (Kbytes) # Diagnostics MSGPATH /usr/informix/online.log # System message log file path CONSOLE /dev/console # System console message path ALARMPROGRAM /usr/informix/etc/log_full.sh # Alarm program pathSYSALARMPROGRAM /usr/informix/etc/evidence.sh # System Alarm program path TBLSPACE_STATS 1 # System Archive Tape Device TAPEDEV /usr/informix/tape/tapedev # Tape device path TAPEBLK 16 # Tape block size (Kbytes) TAPESIZE 1900000 # Maximum amount of data to put on tape (Kbytes) # Log Archive Tape Device LTAPEDEV /usr/informix/tape/tapedev # Log tape device path LTAPEBLK 16 # Log tape block size (Kbytes) LTAPESIZE 1900000 # Max amount of data to put on log tape (Kbytes) # Optical STAGEBLOB # Informix Dynamic Server/Optical staging area # System Configuration SERVERNUM 0 # Unique id corresponding to a DynamicServer instance DBSERVERNAME dana # Name of default database server DBSERVERALIASES tcp_dana # List of alternate dbservernames DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. RESIDENT 1 # Forced residency flag (Yes = 1, No = 0) MULTIPROCESSOR 0 # 0 for single-processor, 1 formulti-processor NUMCPUVPS 1 # Number of user (cpu) vps SINGLE_CPU_VP 1 # If non-zero, limit number of cpu vps toone NOAGE 1 # Process aging AFF_SPROC 0 # Affinity start processor AFF_NPROCS 0 # Affinity number of processors # Shared Memory Parameters LOCKS 2000 # Maximum number of locks BUFFERS 200 # Maximum number of shared buffers NUMAIOVPS 1 # Number of IO vps PHYSBUFF 32 # Physical log buffer size (Kbytes) LOGBUFF 32 # Logical log buffer size (Kbytes)LOGSMAX 12 # Maximum number of logical log files CLEANERS 1 # Number of buffer cleaner processes SHMBASE 0x80000000 # Shared memory base address SHMVIRTSIZE 8000 # initial virtual shared memory segmentsize SHMADD 8192 # Size of new shared memory segments (Kbytes) SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited CKPTINTVL 300 # Check point interval (in sec) LRUS 3 # Number of LRU queues LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit LTXHWM 45 # Long transaction high water markpercentage LTXEHWM 55 # Long transaction high water mark (exclusive) TXTIMEOUT 0x12c # Transaction timeout (in sec) STACKSIZE 32 # Stack size (Kbytes) # System Page Size # BUFFSIZE - Dynamic Server no longer supports this configuration parameter. #