RE: Perfomance Tuning
Posted in 2003
Topics: High Availability & Replication, Performance & Tuning, Storage & Space Management, Server Administration, Transactions, Locking & Isolation, Logging & Checkpoints, Networking & sqlhosts Configuration, Platform-Specific Issues, Versions, Editions & End-of-Life
You say showing signs of slowing down. You need to know what those
plus minus 300 users are running on your server. One thing to
investigate - are they running any / more reports than they normally do
? Any new batch processes ?
These things can have a big impact on system performance.
-----Original Message-----
From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org]
On Behalf Of Bonny
Sent: Wednesday, December 10, 2003 12:47 PM
To: informix-list@iiug.org
Subject: Perfomance Tuning
I have IDS 7.31 running on HP-UX 11.0 and 4 Gig of memory.
I have a 40 Gig database with on average 260 users and at peak about
315 users.
I want to tune my database , as it has shown signs of slowing down
recently.
Checkpoints are taking on average 10 seconds,under normal processing
there should be 6 seconds.
I have posted my onconfig file,onstat -p .What parameters should i
consider for tuning both from the Informix side and Unix side.
Onconfig
#***********************************************************************
***
#
# INFORMIX SOFTWARE, INC.
#
# Title: onconfig.std
# Description: Informix Dynamic Server Configuration Parameters
#
#***********************************************************************
***
# Root Dbspace Configuration
ROOTNAME rootdbs # Root dbspace name
ROOTPATH /dev/rootdbs # Path for device containing rootdbspace
ROOTOFFSET 0 # Offset of root dbspace into device
(Kbytes)
ROOTSIZE 1000000 # Size of root dbspace (Kbytes)
# Disk Mirroring Configuration Parameters
MIRROR 0 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH # Path for device containing mirroredroot
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
# Physical Log Configuration
PHYSDBS rootdbs # Location (dbspace) of physical log
PHYSFILE 250000 # Physical log file size (Kbytes)
# Logical Log Configuration
LOGFILES 30 # Number of logical log files
LOGSIZE 5000 # Logical log size (Kbytes)
# Diagnostics
MSGPATH /u/informix/online.log # System message log file path
CONSOLE /dev/console # System console message path
ALARMPROGRAM /u/informix/etc/log_full.sh # Alarm program pathSYSALARMPROGRAM /u/informix/etc/evidence.sh # System Alarm program
path
TBLSPACE_STATS 0
# System Archive Tape Device
TAPEDEV /dev/rmt/c8t3d0BEST # Tape device path
TAPEBLK 6144 # Tape block size (Kbytes)
TAPESIZE 80000000 # Maximum amount of data to put on
tape (Kbytes)
# Log Archive Tape Device
LTAPEDEV /dev/rmt/1m # Log tape device pat
LTAPEBLK 1024 # Log tape block size (Kbytes)
LTAPESIZE 4000000 # Max amount of data to put on log
tape (Kbytes)
# Optical
STAGEBLOB # Informix Dynamic Server/Optical
staging area
# System Configuration
SERVERNUM 1 # Unique id corresponding to a DynamicServer instance
DBSERVERNAME ok_srvr # Name of default database server
DBSERVERALIASES ok_tcp # List of alternate dbservernames
NETTYPE ipcshm,1,500,CPU # Configure poll thread(s) fornettype
NETTYPE soctcp,1,5,NET # Configure poll thread(s) for nettype
DEADLOCK_TIMEOUT 60 # Max time to wait of lock indistributed env.
RESIDENT -1 # Forced residency flag (Yes = 1, No =
0)
MULTIPROCESSOR 1 # 0 for single-processor, 1 formulti-processor
NUMCPUVPS 2 # Number of user (cpu) vps
SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vpsto one
NOAGE 1 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 0 # Affinity number of processors
# Shared Memory Parameters
LOCKS 400000 # Maximum number of locks
BUFFERS 200000 # Maximum number of shared buffers
NUMAIOVPS 8 # Number of IO vps
PHYSBUFF 128 # Physical log buffer size (Kbytes)
LOGBUFF 128 # Logical log buffer size (Kbytes)LOGSMAX 100 # Maximum number of logical log files
CLEANERS 127 # Number of buffer cleaner processes
SHMBASE 0x0 # Shared memory base address
SHMVIRTSIZE 300000 # initial virtual shared memorysegment size
SHMADD 40000 # Size of new shared memory segments
(Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes).
0=>unlimited
CKPTINTVL 360 # Check point interval (in sec)
LRUS 127 # Number of LRU queues
LRU_MAX_DIRTY 1 # LRU percent dirty begin cleaninglimit
LRU_MIN_DIRTY 0 # LRU percent dirty end cleaning limit
LTXHWM 50 # Long transaction high water markpercentage
LTXEHWM 60 # Long transaction high water mark
(exclusive)
TXTIMEOUT 0x12c # Transaction timeout (in sec)
STACKSIZE 64 # Stack size (Kbytes)
# System Page Size
# BUFFSIZE - Dynamic Server no longer supports this configuration
parameter.
# To determine the page size used by Dynamic Server on your
platform
# see the last line of output from the command, 'onstat
-b'.
# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline
restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.
OFF_RECVRY_THREADS 10 # Default number of offline workerthreads
ON_RECVRY_THREADS 1 # Default number of online workerthreads
# Data Replication Variables
# DRAUTO: 0 manual, 1 retain type, 2 reverse type
DRAUTO 0 # DR automatic switchover
DRINTERVAL 30 # DR max time between DR buffer
flushes (in sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND /u/informix/etc/dr.lostfound # DR lost+found file path
# CDR Variables
CDR_LOGBUFFERS 2048 # size of log reading buffer pool
(Kbytes)
CDR_EVALTHREADS 1,2 # evaluator threads
(per-cpu-vp,additional)
CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR
queue (Kbytes)CDR_LOGDELTA 30 # % of log space allowed in queue
memory
CDR_NUMCONNECT 400 # Expected connections per server
CDR_NIFRETRY 300 # Connection retry (seconds)
CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0
none, 9 max)
# Backup/Restore variables
BAR_ACT_LOG /tmp/bar_act.log
BAR_MAX_BACKUP 0
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 31
# Informix Storage Mana
Related threads
- Why would sysptprof have 0 entries for all counters?
- Hi there
- IDS on Solaris(spark server)Multiprocessor Setup
- Re: Getting input array scroll to go vertical before horizontal???
- how to use onstat -P