Re: Onaudit

Use onaudit -o -u <username> and it'll print out the audit masks set for the user. If only _default has been used for the user it'll show the masks included in the _default template. On 9.30.FC2 I get the following: INF9.30.FC2W2-/prods1/9.30.FC2W2/bin> onaudit -o -u rsarkar Onaudit -- Audit Subsystem Configuration Utility Copyright (C) Informix Software, Inc., 1997 rsarkar - FDROP,FDRSN,FRDRW,FGRFR,FSTRL,FONMN,FRNDB,FONPL,FCRDM,FDRRT,FCRDT,FRNIX Thanx much, Rajib Sarkar Advisory Support Engineer (RAS) IBM Data Management Group Ph : (602)-217-2100 Fax: (602)-217-2100 As long as you derive inner help and comfort from anything, keep it -- Mahatma Gandhi "Weallans, Malcolm" <Malcolm.Weallans@capi To: "'informix-list@iiug.org'" <informix-list@iiug.org> talone.com> cc: Sent by: Subject: Onaudit owner-informix-list@ii ug.org 07/08/2003 06:45 AM I am investigating the use on onaudit. The documentation refers to the _default, _require, and _exclude masks. Is there any way in which I can find out what these masks are set to. In a recent test I removed all user masks and ran the system for a short period. There was a large amount of information recorded to the audit file, so I assume that there are many settings in _default but what they are is the big question. Any help appreciated as usual Malcolm ************************************************************************** The information transmitted herewith is sensitive information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. sending to informix-list