Re: -25572 Network driver cannot bind a name to the port.

The problem is solved...thanks a lot for all ur support Added and modified following entries in ONCONFIG file, SQLHOSTS and services file ONCONFIG DBSERVERNAME kam940shm # Name of default database server DBSERVERALIASES kam940q1 # List of alternate dbservernames NETTYPE ipcshm,1,20,CPU # Override sqlhosts defaults NETTYPE tlitcp,1,20,NET # Override sqlhosts defaults SQLHOSTS kam940q1 ontlitcp kamal infsrv0 kam940shm onipcshm kamal kamal SERVICES #shailesh 8000/tcp # Informix database client connection infsrv0 8000/tcp # Informix database client connection Regards, Shailesh M Board no.: - 30215000 Ext. no.: - 8774 -----Original Message----- From: François Dénommée [mailto:francois.denommee@videotron.ca] Sent: Saturday, January 22, 2005 6:25 PM To: ids@iiug.org; Shailesh_More@bmc.com Subject: Re: -25572 Network driver cannot bind a name to the port. [4068] Recently I solved a situation generating that same error message on a SCO 5.06 box with SE 7.31 installed. The source of the problem had very few about informix. Someone scheduled a task looking for a specific process, that was not running, and this was the error message about the result of that query. Essentially, they were investigating for the informix sqlexec process and launching the process if not found. I would suggest that you verify some few more things: 1- Make an audit of all cron contents, for all users crontab -l 2- Make a verification of all root or priviliged users and see if this error message is also present. 3-If it is a SCO box, do also a check within those 2 files: /usr/adm/messages and /usr/adm/syslog 4- As much as possible, do a manual execution of any scripts, tasks scheduled from what you might have found in 1 Regards Francois More, Shailesh wrote: > > Hi, > > I am getting following error message > > "-25572 Network driver cannot bind a name to the port." > > Please find the contain of INFORMIX environment variables, sqlhosts, > services and onconfig file. > > INFORMIX environment variables > INFORMIXDIR=/usr/informix/9.40.UC1 > INFORMIXSERVER=kam940q1 > ONCONFIG=onconfig.kam940q1> > SQLHOSTS > kam940q1 ontlitcp kamal shailesh > kamxpsq1.1 onipcshm kamal infsrv2> > SERVICES > shailesh 8000/tcp # Informix database client > connection > #infsrv0 8000/tcp # Informix database client > connection > infsrv2 7206/tcp # Informix database client > connection > infsrv6 7201/tcp # Informix database client > connection > infsrv7 7202/tcp # Informix database client > connection > infsrv8 7203/tcp # Informix database client > connection > infsrv9 7204/tcp # Informix database client > connection > infsrv13 7266/tcp # Informix database client > connection > infsrv14 7267/tcp # Informix database client > connection > > onconfig.kam940q1 > # Root Dbspace Configuration > > ROOTNAME rootdbs # Root dbspace name > ROOTPATH /usr/informix/databases/kam940q1/datafiles/root.dbf > ROOTOFFSET 0 # Offset of root dbspace into device > (Kbytes) > ROOTSIZE 35000 # Size of root dbspace (Kbytes) 9/96:changedfrom > 20000 > # 1/7/97: changed from 22500 to 25000 > > # Disk Mirroring Configuration Parameters > > MIRROR 0 # Mirroring flag (Yes = 1, No = 0) > # Path for device containing mirrored root > # MIRRORPATH /usr/informix/databases/kam940q1/mirrorfiles/mirror.dbf > MIRROROFFSET 0 # Offset into mirrored device (Kbytes)> > # Physical Log Configuration > > PHYSDBS rootdbs # Location (dbspace) of physical log > PHYSFILE 2000 # Physical log file size (Kbytes)> # Logical Log Configuration > > LOGFILES 6 # Number of logical log files > LOGSIZE 1000 # Logical log size (Kbytes)> > # Diagnostics > > # System message log file path > MSGPATH /usr/informix/databases/kam940q1/logfiles/online.log > CONSOLE /usr/informix/databases/kam940q1/logfiles/console.log > ALARMPROGRAM # Alarm program path> > # System Archive Tape Device > > TAPEDEV /usr/informix/databases/kam940q1/logfiles/tape # Tape > device path > TAPEBLK 32 # Tape block size (Kbytes) > TAPESIZE 1024000 # Maximum amount of data to put ontape > (Kbytes) > > # Log Archive Tape Device > > LTAPEDEV /usr/informix/databases/kam940q1/logfiles/ltape # Log tape > device path > LTAPEBLK 32 # Log tape block size (Kbytes) > LTAPESIZE 1024000 # Max amount of data to put on logtape > (Kbytes) > > # Optical > > STAGEBLOB # INFORMIX-OnLine/Optical staging area > > # System Configuration > > SERVERNUM 1 # Unique id corresponding to a OnLine> instance > DBSERVERNAME kam940q1 # Name of default databaseserver > DBSERVERALIASES # List of alternate dbservernames > DEADLOCK_TIMEOUT 60 # Max time to wait of lock indistributed > env. > RESIDENT 0 # Forced residency flag (Yes = 1, No = 0) > > MULTIPROCESSOR 0 # 0 for single-processor, 1 for> multi-processor > NUMCPUVPS 1 # Number of user (cpu) vps > SINGLE_CPU_VP 1 # If non-zero, limit number of cpuvps to > one > > NOAGE 0 # Process aging > AFF_SPROC 0 # Affinity start processor > AFF_NPROCS 0 # Affinity number of processors> > # Shared Memory Parameters > > LOCKS 5000 # Maximum number of locks > BUFFERS 200 # Maximum number of shared buffers > NUMAIOVPS 2 # Number of IO vps > PHYSBUFF 32 # Physical log buffer size (Kbytes) > LOGBUFF 32 # Logical log buffer size (Kbytes)> LOGSMAX 6 # Maximum number of logical log files > CLEANERS 1 # Number of buffer cleaner processes > SHMBASE 0x0A000000L # Shared memory base address > NETTYPE ipcshm,1,20,CPU # Override sqlhosts defaults> # NETTYPE tlitcp,1,20,NET # Override sqlhosts defaults > SHMVIRTSIZE 8000 # initial virtual shared memorysegment size > SHMADD 8192 # Size of new shared memory segments > (Kbytes) > SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited > CKPTINTVL 300 # Check point interval (in sec) > LRUS 8 # Number of LRU queues > LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaninglimit > LRU_MIN_DIRTY 50 # LRU percent dirty end cleaninglimit > LTXHWM 50 # Long transaction high water mark> percentage > LTXEHWM 60 # Long transaction high water mark > (exclusive) > TXTIMEOUT 300 # Transaction timeout (in sec) > STACKSIZE 32 # Stack size (Kbytes)> > # System Page Size > # BUFFSIZE - OnLine no longer supports this configuration parameter. > # To determine the page size used by OnLine on your platform > # see the last line of output from the command, 'onstat * b'.nate > dbservernames > > # Recovery Variables > # OFF_RECVRY_THREADS: > # Number of parallel worker threads during fast recovery or an offline > restore. > # ON_RECVRY_THREADS: > # Number of parallel worker threads during an online restore. > > OFF_RECVRY_THREADS 10 # Default number of offline workerthreads > ON_RECVRY_THREADS 1 # Default number of online workerthreads > > # Data Replication Variabl