Re: How to set TERMINFO on SCO

Dirk Dunno if it will solve your problem, but on HP-UX 7.1? I had problems with dbaccess and isql with TERMCAP=$INFORMIXDIR/etc/termcap so I used TERMCAP=/etc/termcap and it works very nicely. HTH Sujit Pal ______________________________ Reply Separator _________________________________ Subject: How to set TERMINFO on SCO Author: Dirk.Scheer@stadt-mh.de (Dirk Scheer) at Internet Date: 3/18/98 7:26 AM Hello out there, I've problems setting TERMINFO or TERMCAP on SCO 3.2v5.0.4 and INFORMIX-Online 7.22.UC3. When displaying a form with ISQL all is working well. But if I hit the INTERRUPT-KEY in a form, the screen is messed up (the menu is shown in the middle of the screen). After pressing <CTRL>+R the screen is shown correctly. So I've tried several settings, but with no success: 1) INFORMIXTERM=termcap TERMCAP=$INFORMIXDIR/etc/termcap TERM=vt100 2) INFORMIXTERM=terminfo TERMINFO=/usr/lib/terminfo TERM=vt100 I've set TERM to vt100 or vt220 or vt320, but there is always the same effect... When starting a 4GL-program, the screen is not messed up when pressing the INTERRUPT-KEY in a form, but at the position of the cursor is a "[6;71H" displayed. We have several other machines of other vendors (HP, Motorola, Olivetti) where these problems do not occur. Can anybody help me??? I'm getting mad... Thanks in advance Dirk Stadtverwaltung Muelheim an der Ruhr Ruhrstr. 32 45468 Muelheim an der Ruhr Tel 0208/455 1006 Fax 0208/455 58 1006 eMail dirk.scheer@stadt-mh.de