Single CPU Performance Problems?

Hi, I need some help tuning a single processor Sun Microsystems Ultra 5 system with 256 meg of memory running IDS 7.3 and Solaris 7. We have an application written in Java that frequently loads large amounts of data into the database. We can not seem to get reliably good performance from this application with IDS on the Sun Platform. The application also is being run on Windows NT Server 4.0 with SQL Server 7.0 and we get good performance. As a comparison, loading the same data on an NT box with 1 Pentium III 400 cpu and 256 meg of memory we can average loading 10 rows per second into the database - on the Sun box with IDS 7.3 we can only average 3.5 rows per second. I think we should be able to get the performance to at least equal the NT box. Any ideas or suggestions? Thanks, Greg #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig.std # Description: Informix Dynamic Server Configuration Parameters # #************************************************************************** # Root Dbspace Configuration ROOTNAME rootdbs # Root dbspace nameROOTPATH /dev/informix_root # Path for device containing root dbspace ROOTOFFSET 2 # Offset of root dbspace into device (Kbytes) ROOTSIZE 20000 # Size of root dbspace (Kbytes) # Disk Mirroring Configuration Parameters MIRROR 0 # Mirroring flag (Yes = 1, No = 0) MIRRORPATH # Path for device containing mirrored root MIRROROFFSET 0 # Offset into mirrored device (Kbytes) # Physical Log Configuration PHYSDBS rootdbs # Location (dbspace) of physical log PHYSFILE 1000 # Physical log file size (Kbytes) # Logical Log Configuration LOGFILES 6 # Number of logical log files LOGSIZE 500 # Logical log size (Kbytes) # Diagnostics MSGPATH /usr/informix/online.log # System message log file path CONSOLE /dev/console # System console message path # ALARMPROGRAM /usr/informix/etc/log_full.sh # Alarm program path ALARMPROGRAM /usr/informix/etc/no_log.sh # Alarm program pathSYSALARMPROGRAM /usr/informix/etc/evidence.sh # System Alarm program path TBLSPACE_STATS 0 # System Archive Tape Device # TAPEDEV /dev/tapedev # Tape device path TAPEDEV /dev/null # Tape device path TAPEBLK 16 # Tape block size (Kbytes) TAPESIZE 10240 # Maximum amount of data to put on tape (Kbytes) # Log Archive Tape Device LTAPEDEV /dev/tapedev # Log tape device path LTAPEBLK 16 # Log tape block size (Kbytes) LTAPESIZE 10240 # Max amount of data to put on log tape (Kbytes) # Optical STAGEBLOB # Informix Dynamic Server/Optical staging area # System Configuration SERVERNUM 0 # Unique id corresponding to a Dynamic Server instance DBSERVERNAME engledive # Name of default database server DBSERVERALIASES # engledive_tp # List of alternate dbservernames NETTYPE # Configure poll thread(s) for nettype DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. RESIDENT 1 # Forced residency flag (Yes = 1, No = 0) MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor NUMCPUVPS 1 # Number of user (cpu) vps SINGLE_CPU_VP 1 # If non-zero, limit number of cpu vps to one NOAGE 1 # Process aging AFF_SPROC 0 # Affinity start processor AFF_NPROCS 0 # Affinity number of processors # Shared Memory Parameters LOCKS 20000 # Maximum number of locks BUFFERS 5000 # Maximum number of shared buffers NUMAIOVPS 2 # Number of IO vps PHYSBUFF 32 # Physical log buffer size (Kbytes) LOGBUFF 32 # Logical log buffer size (Kbytes)LOGSMAX 6 # Maximum number of logical log files CLEANERS 8 # Number of buffer cleaner processes SHMBASE # Shared memory base address SHMVIRTSIZE 8000 # initial virtual shared memory segment size SHMADD 8192 # Size of new shared memory segments (Kbytes) SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited CKPTINTVL 300 # Check point interval (in sec) LRUS 8 # Number of LRU queues LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit LTXHWM 50 # Long transaction high water mark percentage LTXEHWM 60 # Long transaction high water mark (exclusive) TXTIMEOUT 300 # Transaction timeout (in sec) STACKSIZE 32 # Stack size (Kbytes) # System Page Size # BUFFSIZE - Dynamic Server no longer supports this configuration parameter. # To determine the page size used by Dynamic Server on your platform # see the last line of output from the command, 'onstat -b'. # Recovery Variables # OFF_RECVRY_THREADS: # Number of parallel worker threads during fast recovery or an offline restore. # ON_RECVRY_THREADS: # Number of parallel worker threads during an online restore. OFF_RECVRY_THREADS 10 # Default number of offline worker threads ON_RECVRY_THREADS 1 # Default number of online worker threads # Data Replication Variables # DRAUTO: 0 manual, 1 retain type, 2 reverse type DRAUTO 0 # DR automatic switchover DRINTERVAL 30 # DR max time between DR buffer flushes (in sec) DRTIMEOUT 30 # DR network timeout (in sec) DRLOSTFOUND /usr/informix/etc/dr.lostfound # DR lost+found file path # CDR Variables CDR_LOGBUFFERS 2048 # size of log reading buffer pool (Kbytes) CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional) CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds) CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)CDR_LOGDELTA 30 # % of log space allowed in queue memory CDR_NUMCONNECT 16 # Expected connections per server CDR_NIFRETRY 300 # Connection retry (seconds) CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none, 9 max) # Backup/Restore variables BAR_ACT_LOG /tmp/bar_act.log BAR_MAX_BACKUP 0 BAR_RETRY 1 BAR_NB_XPORT_COUNT 10 BAR_XFER_BUF_SIZE 31 # Informix Storage Manager variables ISM_DATA_POOL ISMData # If the data pool name is changed, be sure to # update $INFORMIXDIR/bin/onbar. Change to # ism_catalog -create_bootstrap -pool <new name> ISM_LOG_POOL ISMLogs # Read Ahead Variables RA_PAGES 32 # Number of pages to attempt to read ahead RA_THRESHOLD 32 # Number of pages left before next group # DBSPACETEMP: # Dynamic Server equivalent of DBTEMP for SE. This is the list of dbspaces # that the Dynamic Server SQL Engine will use to create temp tables etc. # If specified it must be a colon separated list of dbspaces that exist # when the Dynamic Server system is brought online. If not specified, or if # all dbspaces specified are invalid, various ad hoc queries will create # temporary files in /tmp instead. DBSPACETEMP # Default temp dbspaces # DUMP*: # The following parameters control the type of diagnostics information which # is preserved when an unanticipated error condition (assertion failure) occurs # during Dynamic Server operations. # For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No. DUMPDIR /tmp # Preserve diagnostics in this directory DUMPSHMEM 1 # Dump a copy of shared memory@@NL