RE: Split Big Application in New Era

Some guidelines * do not make your DLLs larger than, say, 1.3 MB * prevent cross-DLL calls as much as possible: they are costy and NE isn't very speedy of itself * After splitting your application you will probably have to comment out some lines to get the bunch to link. Take this example: DLL 1 DLL2 Func A Func B Call Func B Call Func C End Func A End Func B Func D Func C .... Call Func D End Func D End Func C You will have to comment out either the call from A to B or from C to D, otherwise linking won't succeed. After you have succesfully created a set of DLLs (or better: associated LIBs) you can remove the comments again. Good luck! Frido ------------------------------------------------------------------------ - Frido van Orden FAA Partners BV Planetenbaan 117 3606 AK Maarssen The Netherlands Phone: +31-346-587076 Fax: +31-346-587086 Email: fridoo@faapartners.com ------------------------------------------------------------------------ - > -----Original Message----- > From: Ahmad Ramzi Salleh [SMTP:ramzi@telekom.com.my] > Sent: Tuesday, December 02, 1997 4:33 AM > To: informix-list@rmy.emory.edu > Subject: Split Big Application in New Era > > I want to split my New Era (ver 2.20) application into smaller > portions > (DLLs) for easy maintenance. > > Anybody has the information on how to get this done step by step ? > > Any suggestion is appreciated. Mail me if you have attachment.