RE: "Window too small to display menu"
Thanks for the idea. Tried this and got the same results. Here's the stty
output:
$ stty -a
speed 19200 baud; line = 0;
rows = 24; columns = 80
min = 4; time = 0;
intr = ^C; quit = ^\\; erase = ^H; kill = ^U
eof = ^D; eol = ^@; eol2 <undef>; swtch <undef>
stop = ^S; start = ^Q; susp <undef>; dsusp <undef>
werase <undef>; lnext <undef>
parenb -parodd cs7 -cstopb hupcl -cread -clocal -loblk -crts-ignbrk brkint ignpar -parmrk -inpck istrip -inlcr -igncr icrnl -iuclc
ixon -ixany ixoff -imaxbel -rtsxoff -ctsxon -ienqak
isig icanon -iexten -xcase echo echoe echok -echonl -noflsh
-echoctl -echoprt -echoke -flusho -pendin
opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel -tostop
$
Any other ideas?
> -----Original Message-----
> From: Jonathan Leffler [SMTP:jleffler@informix.com]
> Sent: Tuesday, August 25, 1998 12:33 PM
> To: Tom Best
> Cc: informix-list@iiug.org
> Subject: Re: "Window too small to display menu"
>
> On Tue, 25 Aug 1998, Tom Best [Bentley] wrote:
>
> > I telnet to a unix box from an NT telnet session. I try to run
> > onmonitor, and I get the below message. TERM is set to vt100. Any
> > ideas? Thanks.
> >
> > Program stopped at "tb4_main.4gl", line number 440.
> > FORMS statement error number -1150.
> > Window is too small to display this menu.
> > $
>
> Check what stty -a says about the size of your window, which should be
> 80x24 at least. If that is wrong, try setting LINES=24 COLUMNS=80 in
> your environment before running OnMonitor.
>
> Yours,
> Jonathan Leffler (jleffler@informix.com) #include <witticism.h>
> Guardian of DBD::Informix v0.60 -- http://www.perl.com/CPAN
> Informix IDN for D4GL & Linux -- http://www.informix.com/idn