Point in Time Recovery Failed
A user on IDS 9.40 FC5 (AIX) with ON-Bar and TSM couldn't do a point-in-time restore to 18:05 after a second level-0 archive had been taken at 18:25; onbar either did nothing or restored from the latest archive instead. Art Kagel explained you must use the earlier 18:00 archive as the restore base (you can't roll forward to a time before the base archive). Others suggested editing (after backing up) the ixbar.<servernum> file to remove entries after the wanted level-0, keeping the logical logs rootdbs needs, checking TSM retention policies, resetting bar_action/bar_instance and ixbar, and enabling BAR_DEBUG logging. Editing ixbar still gave "Backup object does not exist in Storage Manager" errors; no confirmed resolution is recorded.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
Hi Folks,
I Got a problem with restore point in time. I´m using IDS 9.40 FC5 for AIX
5.2 ML 8. I performed a level 0 archive 3 times. I´m using onbar and my
Storage Manager is Tivoli (TSM) with TDP 5.2.1 and API 5.1.5 . The problem
is that I can´t restore my archive to 30 minutes ago. The test I made was:
At 22 - 06 - 2006:
1 - Create a table
2 - Perform a Level 0 archive at 18:00
3 - Wait 10 minutes
4 - Drop the table created
5 - Perform a Level 0 archive again
6 - Shut the IDS Server down
7 - Perform a restore using onbar like this:
server:/usr/informix> onbar -r -t "2006-06-22 18:05:00"
I performed this statement 10 minutes after a shut the IDS server down. I
didn´t recieve any message at the screen and the Informix instance doesn´t
even try to initialize ( I was monitoring online.log). Worse: When put a
datetime after that used ( 20 minutes after 18:25), the restore was
performed but was not my expectation, I mean, was not a point in time
restore but a whole restore using the latest avaliable archive.
Does anybody here see this before ?
You have to use the archive taken at 18:00 as the restore base for a
point-in-time restore. After restoring the server to its state at 18:00 onbar
and the engine will roll-forward whatever logical log entries are needed to
bring the engine back to its state at 18:05:00. You cannot do a point-in-time
restore to a point BEFORE the base archive was taken.
Art S. Kagel
----- Original Message -----
From: Andr3) 21/32 Luiz.... <ids@iiug.org>
At: 6/23 8:49:14
Hi Folks,
I Got a problem with restore point in time. I'm using IDS 9.40 FC5 for AIX
5.2 ML 8. I performed a level 0 archive 3 times. I'm using onbar and my
Storage Manager is Tivoli (TSM) with TDP 5.2.1 and API 5.1.5 . The problem
is that I can't restore my archive to 30 minutes ago. The test I made was:
At 22 - 06 - 2006:
1 - Create a table
2 - Perform a Level 0 archive at 18:00
3 - Wait 10 minutes
4 - Drop the table created
5 - Perform a Level 0 archive again
6 - Shut the IDS Server down
7 - Perform a restore using onbar like this:
server:/usr/informix> onbar -r -t "2006-06-22 18:05:00"
I performed this statement 10 minutes after a shut the IDS server down. I
didn't recieve any message at the screen and the Informix instance doesn't
even try to initialize ( I was monitoring online.log). Worse: When put a
datetime after that used ( 20 minutes after 18:25), the restore was
performed but was not my expectation, I mean, was not a point in time
restore but a whole restore using the latest avaliable archive.
Does anybody here see this before ?
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
Thanks ART KAGEL,
But I can´t choose what archive I want to use. I don´t even know what
physical TAPE I´m using. The TSM send the archive to a tape. The problem is,
I got 800 Gb in one tape, I´m mean, in a week, I could have a a lot of
"Level 0 Archives". Do I have a way to chosse this archive? How could I send
a statement that bring me a specific archive? I´m wanting something
impossible?
Thanks
André Luiz - Brasil
>From: "ART KAGEL, ...." <kagel@bloomberg.net>
>Reply-To: ids@iiug.org
>To: ids@iiug.org
>Subject: Re: Point in Time Recovery Failed [7043]
>Date: Fri, 23 Jun 2006 08:54:29 -0400 (EDT)
>
>You have to use the archive taken at 18:00 as the restore base for a
>point-in-time restore. After restoring the server to its state at 18:00
>onbar>and the engine will roll-forward whatever logical log entries are needed to
>bring the engine back to its state at 18:05:00. You cannot do a
>point-in-time
>restore to a point BEFORE the base archive was taken.
>
>Art S. Kagel
>----- Original Message -----
>From: Andr3) 21/32 Luiz.... <ids@iiug.org>
>At: 6/23 8:49:14
>
>Hi Folks,
>
>I Got a problem with restore point in time. I'm using IDS 9.40 FC5 for AIX
>5.2 ML 8. I performed a level 0 archive 3 times. I'm using onbar and my
>Storage Manager is Tivoli (TSM) with TDP 5.2.1 and API 5.1.5 . The problem
>is that I can't restore my archive to 30 minutes ago. The test I made was:
>
>At 22 - 06 - 2006:
>
>1 - Create a table
>2 - Perform a Level 0 archive at 18:00
>3 - Wait 10 minutes
>4 - Drop the table created
>5 - Perform a Level 0 archive again
>6 - Shut the IDS Server down
>7 - Perform a restore using onbar like this:
>
>server:/usr/informix> onbar -r -t "2006-06-22 18:05:00"
>
>I performed this statement 10 minutes after a shut the IDS server down. I
>didn't recieve any message at the screen and the Informix instance doesn't
>even try to initialize ( I was monitoring online.log). Worse: When put a
>datetime after that used ( 20 minutes after 18:25), the restore was
>performed but was not my expectation, I mean, was not a point in time
>restore but a whole restore using the latest avaliable archive.
>
>Does anybody here see this before ?
>
>
>*******************************************************************************
>Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
>*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
What I do is edit the ixbar.xx file deleting everything prior to the level
0 archive that I want to start from...
You should make a copy of the ixbar.xx file first ... in case something is
ever needed prior to the time you just edited though ...
PDL
"André Luiz...." <andre_rufino@msn.com>
Sent by: ids-bounces@iiug.org
06/23/2006 09:39 AM
Please respond to
ids@iiug.org
To
ids@iiug.org
cc
Subject
Re: Point in Time Recovery Failed [7045]
Thanks ART KAGEL,
But I can´t choose what archive I want to use. I don´t even know what
physical TAPE I´m using. The TSM send the archive to a tape. The problem
is,
I got 800 Gb in one tape, I´m mean, in a week, I could have a a lot of
"Level 0 Archives". Do I have a way to chosse this archive? How could I
send
a statement that bring me a specific archive? I´m wanting something
impossible?
Thanks
André Luiz - Brasil
>From: "ART KAGEL, ...." <kagel@bloomberg.net>
>Reply-To: ids@iiug.org
>To: ids@iiug.org
>Subject: Re: Point in Time Recovery Failed [7043]
>Date: Fri, 23 Jun 2006 08:54:29 -0400 (EDT)
>
>You have to use the archive taken at 18:00 as the restore base for a
>point-in-time restore. After restoring the server to its state at 18:00
>onbar>and the engine will roll-forward whatever logical log entries are needed
to
>bring the engine back to its state at 18:05:00. You cannot do a
>point-in-time
>restore to a point BEFORE the base archive was taken.
>
>Art S. Kagel
>----- Original Message -----
>From: Andr3) 21/32 Luiz.... <ids@iiug.org>
>At: 6/23 8:49:14
>
>Hi Folks,
>
>I Got a problem with restore point in time. I'm using IDS 9.40 FC5 for
AIX
>5.2 ML 8. I performed a level 0 archive 3 times. I'm using onbar and my
>Storage Manager is Tivoli (TSM) with TDP 5.2.1 and API 5.1.5 . The
problem
>is that I can't restore my archive to 30 minutes ago. The test I made
was:
>
>At 22 - 06 - 2006:
>
>1 - Create a table
>2 - Perform a Level 0 archive at 18:00
>3 - Wait 10 minutes
>4 - Drop the table created
>5 - Perform a Level 0 archive again
>6 - Shut the IDS Server down
>7 - Perform a restore using onbar like this:
>
>server:/usr/informix> onbar -r -t "2006-06-22 18:05:00"
>
>I performed this statement 10 minutes after a shut the IDS server down. I
>didn't recieve any message at the screen and the Informix instance
doesn't
>even try to initialize ( I was monitoring online.log). Worse: When put a
>datetime after that used ( 20 minutes after 18:25), the restore was
>performed but was not my expectation, I mean, was not a point in time
>restore but a whole restore using the latest avaliable archive.
>
>Does anybody here see this before ?
>
>
>*******************************************************************************
>Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
>*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
I do this too, but remember to check the logical log needed for the rootdbs (you'll see it a bit right of the time column), sometimes it is several above the rootdbs, and you need those....then edit accordingly. -- Sam Gentsch office (334)768-7039 cell (706)289-6710 -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Peter_Logan.... Sent: Friday, June 23, 2006 9:44 AM To: ids@iiug.org Subject: Re: Point in Time Recovery Failed [7046] What I do is edit the ixbar.xx file deleting everything prior to the level 0 archive that I want to start from... You should make a copy of the ixbar.xx file first ... in case something is ever needed prior to the time you just edited though ... PDL
Don't use onbar myself, so I'm not the expert. However, I note that others have
posted how they are doing this.
Art
----- Original Message -----
From: Andr3) 21/32 Luiz.... <ids@iiug.org>
At: 6/23 9:43:06
Thanks ART KAGEL,
But I can't choose what archive I want to use. I don't even know what
physical TAPE I'm using. The TSM send the archive to a tape. The problem is,
I got 800 Gb in one tape, I'm mean, in a week, I could have a a lot of
"Level 0 Archives". Do I have a way to chosse this archive? How could I send
a statement that bring me a specific archive? I'm wanting something
impossible?
Thanks
André Luiz - Brasil
>From: "ART KAGEL, ...." <kagel@bloomberg.net>
>Reply-To: ids@iiug.org
>To: ids@iiug.org
>Subject: Re: Point in Time Recovery Failed [7043]
>Date: Fri, 23 Jun 2006 08:54:29 -0400 (EDT)
>
>You have to use the archive taken at 18:00 as the restore base for a
>point-in-time restore. After restoring the server to its state at 18:00
>onbar>and the engine will roll-forward whatever logical log entries are needed to
>bring the engine back to its state at 18:05:00. You cannot do a
>point-in-time
>restore to a point BEFORE the base archive was taken.
>
>Art S. Kagel
>----- Original Message -----
>From: Andr3) 21/32 Luiz.... <ids@iiug.org>
>At: 6/23 8:49:14
>
>Hi Folks,
>
>I Got a problem with restore point in time. I'm using IDS 9.40 FC5 for AIX
>5.2 ML 8. I performed a level 0 archive 3 times. I'm using onbar and my
>Storage Manager is Tivoli (TSM) with TDP 5.2.1 and API 5.1.5 . The problem
>is that I can't restore my archive to 30 minutes ago. The test I made was:
>
>At 22 - 06 - 2006:
>
>1 - Create a table
>2 - Perform a Level 0 archive at 18:00
>3 - Wait 10 minutes
>4 - Drop the table created
>5 - Perform a Level 0 archive again
>6 - Shut the IDS Server down
>7 - Perform a restore using onbar like this:
>
>server:/usr/informix> onbar -r -t "2006-06-22 18:05:00"
>
>I performed this statement 10 minutes after a shut the IDS server down. I
>didn't recieve any message at the screen and the Informix instance doesn't
>even try to initialize ( I was monitoring online.log). Worse: When put a
>datetime after that used ( 20 minutes after 18:25), the restore was
>performed but was not my expectation, I mean, was not a point in time
>restore but a whole restore using the latest avaliable archive.
>
>Does anybody here see this before ?
>
>
>*******************************************************************************
>Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
>*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
Good point ... From: ids-bounces@iiug.org Recipients: ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan) Subject: RE: Point in Time Recovery Failed [7047] Date: 09:51:50 AM Today I do this too, but remember to check the logical log needed for the rootdbs (you'll see it a bit right of the time column), sometimes it is several above the rootdbs, and you need those....then edit accordingly. -- Sam Gentsch office (334)768-7039 cell (706)289-6710 -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Peter_Logan.... Sent: Friday, June 23, 2006 9:44 AM To: ids@iiug.org Subject: Re: Point in Time Recovery Failed [7046] What I do is edit the ixbar.xx file deleting everything prior to the level 0 archive that I want to start from... You should make a copy of the ixbar.xx file first ... in case something is ever needed prior to the time you just edited though ... PDL ******************************************************************************* Forum Note: Use "Reply" to post a response in the discussion forum.
Thanks a lot guys. I´ll try do edit the ixbar.servernum and lets see if can get I what I want. Thanks, thanks .... and thanks André Luiz- Brasil >From: "Peter_Logan...." <Peter_Logan@spartanstores.com> >Reply-To: ids@iiug.org >To: ids@iiug.org >Subject: RE: Point in Time Recovery Failed [7049] >Date: Fri, 23 Jun 2006 10:00:05 -0400 (EDT) > >Good point ... > >From: >ids-bounces@iiug.org >Recipients: >ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan) >Subject: >RE: Point in Time Recovery Failed [7047] >Date: >09:51:50 AM Today > >I do this too, but remember to check the logical log needed for the >rootdbs (you'll see it a bit right of the time column), >sometimes it is several above the rootdbs, and you need those....then >edit accordingly. > >-- >Sam Gentsch >office (334)768-7039 >cell (706)289-6710 > >-----Original Message----- >From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of >Peter_Logan.... >Sent: Friday, June 23, 2006 9:44 AM >To: ids@iiug.org >Subject: Re: Point in Time Recovery Failed [7046] > >What I do is edit the ixbar.xx file deleting everything prior to the >level 0 archive that I want to start from... > >You should make a copy of the ixbar.xx file first ... in case something >is ever needed prior to the time you just edited though ... > >PDL > > >******************************************************************************* > >Forum Note: Use "Reply" to post a response in the discussion forum. > > >******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >
Ok, guys, it´s me again ! I tryied to do what you told me, but it didn´t work. I got some doubts about the lines that I could delete from ixbar.servernum , so I take a copy from this file everytime before I perform a Level 0 archive. Thisa way, I could see exatcly what is changed from each they. But even I edit the file, the problem continue. The message I received was 2006-06-23 14:37:17 831696 876756 XBSA Error: (BSAGetObject) Backup object does not exist in Storage Manager. 2006-06-23 14:37:17 831696 876756 ON-Bar was unable to get backup record of rootdbs from storage manager. 2006-06-23 14:37:17 831696 876756 Due to the previous error, logical restore will not be attempted. I believe that it´s not that easy to find a specific archive in a tape, when this got more than one backup. So guys, I´m trying a last shot with you. Does anybody here have any idea else the before ideas. Thanks again André Luiz >From: "Peter_Logan...." <Peter_Logan@spartanstores.com> >Reply-To: ids@iiug.org >To: ids@iiug.org >Subject: RE: Point in Time Recovery Failed [7049] >Date: Fri, 23 Jun 2006 10:00:05 -0400 (EDT) > >Good point ... > >From: >ids-bounces@iiug.org >Recipients: >ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan) >Subject: >RE: Point in Time Recovery Failed [7047] >Date: >09:51:50 AM Today > >I do this too, but remember to check the logical log needed for the >rootdbs (you'll see it a bit right of the time column), >sometimes it is several above the rootdbs, and you need those....then >edit accordingly. > >-- >Sam Gentsch >office (334)768-7039 >cell (706)289-6710 > >-----Original Message----- >From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of >Peter_Logan.... >Sent: Friday, June 23, 2006 9:44 AM >To: ids@iiug.org >Subject: Re: Point in Time Recovery Failed [7046] > >What I do is edit the ixbar.xx file deleting everything prior to the >level 0 archive that I want to start from... > >You should make a copy of the ixbar.xx file first ... in case something >is ever needed prior to the time you just edited though ... > >PDL > > >******************************************************************************* > >Forum Note: Use "Reply" to post a response in the discussion forum. > > >******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >
Do you know what the TSM retention policy is? Only time I have run into this type of error was when I was attempting to get an old archive that had already been purged from Tivoli. "André Luiz...." <andre_rufino@msn.com> Sent by: ids-bounces@iiug.org 06/23/2006 02:36 PM Please respond to ids@iiug.org To ids@iiug.org cc Subject RE: Point in Time Recovery Failed [7052] Ok, guys, it´s me again ! I tryied to do what you told me, but it didn´t work. I got some doubts about the lines that I could delete from ixbar.servernum , so I take a copy from this file everytime before I perform a Level 0 archive. Thisa way, I could see exatcly what is changed from each they. But even I edit the file, the problem continue. The message I received was 2006-06-23 14:37:17 831696 876756 XBSA Error: (BSAGetObject) Backup object does not exist in Storage Manager. 2006-06-23 14:37:17 831696 876756 ON-Bar was unable to get backup record of rootdbs from storage manager. 2006-06-23 14:37:17 831696 876756 Due to the previous error, logical restore will not be attempted. I believe that it´s not that easy to find a specific archive in a tape, when this got more than one backup. So guys, I´m trying a last shot with you. Does anybody here have any idea else the before ideas. Thanks again André Luiz >From: "Peter_Logan...." <Peter_Logan@spartanstores.com> >Reply-To: ids@iiug.org >To: ids@iiug.org >Subject: RE: Point in Time Recovery Failed [7049] >Date: Fri, 23 Jun 2006 10:00:05 -0400 (EDT) > >Good point ... > >From: >ids-bounces@iiug.org >Recipients: >ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan) >Subject: >RE: Point in Time Recovery Failed [7047] >Date: >09:51:50 AM Today > >I do this too, but remember to check the logical log needed for the >rootdbs (you'll see it a bit right of the time column), >sometimes it is several above the rootdbs, and you need those....then >edit accordingly. > >-- >Sam Gentsch >office (334)768-7039 >cell (706)289-6710 > >-----Original Message----- >From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of >Peter_Logan.... >Sent: Friday, June 23, 2006 9:44 AM >To: ids@iiug.org >Subject: Re: Point in Time Recovery Failed [7046] > >What I do is edit the ixbar.xx file deleting everything prior to the >level 0 archive that I want to start from... > >You should make a copy of the ixbar.xx file first ... in case something >is ever needed prior to the time you just edited though ... > >PDL > > >******************************************************************************* > >Forum Note: Use "Reply" to post a response in the discussion forum. > > >******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > ******************************************************************************* Forum Note: Use "Reply" to post a response in the discussion forum.
Put
BAR_DEBUG 7
BAR_DEBUG_LOG /mydir/myfile
in the $ONCONFIG file and try again.
http://www.geocities.com/Heartland/Acres/4927/debug.html
has lots of good info on onbar and how to debug it.
Otherwise log a support call with IBM.
----- Original Message -----
From: "André Luiz...." <andre_rufino@msn.com>
To: <ids@iiug.org>
Sent: Friday, June 23, 2006 7:36 PM
Subject: RE: Point in Time Recovery Failed [7052]
>
> Ok, guys, it´s me again !
>
> I tryied to do what you told me, but it didn´t work. I got some doubts
> about
> the lines that I could delete from ixbar.servernum , so I take a copy from
> this file everytime before I perform a Level 0 archive. Thisa way, I could
> see exatcly what is changed from each they. But even I edit the file, the
> problem continue. The message I received was
>
> 2006-06-23 14:37:17 831696 876756 XBSA Error: (BSAGetObject) Backup object
> does not exist in Storage Manager.
> 2006-06-23 14:37:17 831696 876756 ON-Bar was unable to get backup record
> of
> rootdbs from storage manager.
> 2006-06-23 14:37:17 831696 876756 Due to the previous error, logical
> restore will not be attempted.
>
> I believe that it´s not that easy to find a specific archive in a tape,
> when
> this got more than one backup. So guys, I´m trying a last shot with you.
> Does anybody here have any idea else the before ideas.
>
> Thanks again
>
> André Luiz
>
>>From: "Peter_Logan...." <Peter_Logan@spartanstores.com>
>>Reply-To: ids@iiug.org
>>To: ids@iiug.org
>>Subject: RE: Point in Time Recovery Failed [7049]
>>Date: Fri, 23 Jun 2006 10:00:05 -0400 (EDT)
>>
>>Good point ...
>>
>>From:
>>ids-bounces@iiug.org
>>Recipients:
>>ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
>>Subject:
>>RE: Point in Time Recovery Failed [7047]
>>Date:
>>09:51:50 AM Today
>>
>>I do this too, but remember to check the logical log needed for the
>>rootdbs (you'll see it a bit right of the time column),
>>sometimes it is several above the rootdbs, and you need those....then
>>edit accordingly.
>>
>>--
>>Sam Gentsch
>>office (334)768-7039
>>cell (706)289-6710
>>
>>-----Original Message-----
>>From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
>>Peter_Logan....
>>Sent: Friday, June 23, 2006 9:44 AM
>>To: ids@iiug.org
>>Subject: Re: Point in Time Recovery Failed [7046]
>>
>>What I do is edit the ixbar.xx file deleting everything prior to the
>>level 0 archive that I want to start from...
>>
>>You should make a copy of the ixbar.xx file first ... in case something
>>is ever needed prior to the time you just edited though ...
>>
>>PDL
>>
>>
>
>>******************************************************************************
*
>>
>>Forum Note: Use "Reply" to post a response in the discussion forum.
>>
>>
>
>>******************************************************************************
*
>> Forum Note: Use "Reply" to post a response in the discussion forum.
>>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
> ---
> [This E-mail has been scanned for viruses but it is your responsibility
> to maintain up to date anti virus software on the device that you are
> currently using to read this email. ]
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.2/373 - Release Date: 22/06/2006
>
>
---
[This E-mail has been scanned for viruses but it is your responsibility
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
I am not sure what you have tried so far but to start a fresh I would do the following 1. Unload/Delete all the records from bar_action, bar_instance tables. 2. Move the file $INFORMIXDIR/etc/ixbar.nnn (servernum) 3. Touch the above file Then do a complete test of your backups and restore. Sunil. -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of André Luiz.... Sent: Friday, June 23, 2006 12:37 PM To: ids@iiug.org Subject: RE: Point in Time Recovery Failed [7052] Ok, guys, it´s me again ! I tryied to do what you told me, but it didn´t work. I got some doubts about the lines that I could delete from ixbar.servernum , so I take a copy from this file everytime before I perform a Level 0 archive. Thisa way, I could see exatcly what is changed from each they. But even I edit the file, the problem continue. The message I received was 2006-06-23 14:37:17 831696 876756 XBSA Error: (BSAGetObject) Backup object does not exist in Storage Manager. 2006-06-23 14:37:17 831696 876756 ON-Bar was unable to get backup record of rootdbs from storage manager. 2006-06-23 14:37:17 831696 876756 Due to the previous error, logical restore will not be attempted. I believe that it´s not that easy to find a specific archive in a tape, when this got more than one backup. So guys, I´m trying a last shot with you. Does anybody here have any idea else the before ideas. Thanks again André Luiz >From: "Peter_Logan...." <Peter_Logan@spartanstores.com> >Reply-To: ids@iiug.org >To: ids@iiug.org >Subject: RE: Point in Time Recovery Failed [7049] >Date: Fri, 23 Jun 2006 10:00:05 -0400 (EDT) > >Good point ... > >From: >ids-bounces@iiug.org >Recipients: >ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan) >Subject: >RE: Point in Time Recovery Failed [7047] >Date: >09:51:50 AM Today > >I do this too, but remember to check the logical log needed for the >rootdbs (you'll see it a bit right of the time column), sometimes it is >several above the rootdbs, and you need those....then edit accordingly. > >-- >Sam Gentsch >office (334)768-7039 >cell (706)289-6710 > >-----Original Message----- >From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of >Peter_Logan.... >Sent: Friday, June 23, 2006 9:44 AM >To: ids@iiug.org >Subject: Re: Point in Time Recovery Failed [7046] > >What I do is edit the ixbar.xx file deleting everything prior to the >level 0 archive that I want to start from... > >You should make a copy of the ixbar.xx file first ... in case something >is ever needed prior to the time you just edited though ... > >PDL > > >*********************************************************************** >******** > >Forum Note: Use "Reply" to post a response in the discussion forum. > > >*********************************************************************** >******** Forum Note: Use "Reply" to post a response in the discussion >forum. > ******************************************************************************* Forum Note: Use "Reply" to post a response in the discussion forum. ******************************************************************************** ******************* The information in this email is confidential and may be legally privileged Access to this email by anyone other than the intended addressee is unauthorized. If you are not the intended recipient of this message, any review, disclosure, copying, distribution, retention, or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you are not the intended recipient, please reply to or forward a copy of this message to the sender and delete the message, any attachments, and any copies thereof from your system. ******************************************************************************** *******************