Assertion Failure at ok

07:52:16 Assert Failed: Memory block header corruption detected inmt_shm_mallo c_segid 2 07:52:16 Informix Dynamic Server Version 7.30.UC3 07:52:16 Who: Session(847, informix@, 0, 0) Thread(17, soctcplst, 0, 1)File: mtshpool.c Line: 2455 I am constantly having this problem on my informmix running on HP-UX 10.2 and once this has happened the database goes down. and the following error is recorded. ERROR 07:52:16 Results: Pool repaired 07:52:16 Action: Please notify Informix Technical Support. 07:52:22 Assert Failed: No Exception Handler 07:52:22 Informix Dynamic Server Version 7.30.UC3 07:52:22 Who: Session(838, informix@, 0, 0) Thread(15, sm_listen, 0, 3) File: mtex.c Line: 314 07:52:22 Results: Exception Caught. Type: MT_EX_OS, Context: mem 07:52:22 Action: Please notify InformixTechnical Support. 07:52:22 stack trace for pid 1307 written to /tmp/af.f0f15 07:52:22 07:52:22 mtex.c, line 314, thread 15, proc id 1307, No Exception Handler. 07:52:22 PANIC: Attempting to bring system down 08:01:23 Segment locked: addr=0xc39a0000, size=155787264 MY onconfig file is set up as follows: ROOTNAME rootdbs # Root dbspace name ROOTPATH /dev/rdsk/c1t12d0 # Path for device containing root dbspace ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) ROOTSIZE 500000 # Size of root dbspace (Kbytes) # Disk Mirroring Configuration Parameters MIRROR 0 # Mirroring flag (Yes = 1, No = 0) MIRRORPATH # Path for device containing mirrored root MIRROROFFSET 0 # Offset into mirrored device (Kbytes) # Physical Log Configuration PHYSDBS logsdbs # Location (dbspace) of physical log PHYSFILE 250000 # Physical log file size (Kbytes) # Logical Log Configuration LOGFILES 32 # Number of logical log files LOGSIZE 5000 # Logical log size (Kbytes) # Diagnostics MSGPATH /u/informix/online.log # System message log file path CONSOLE /dev/console # System console message path ALARMPROGRAM /u/informix/etc/log_full.sh # Alarm program pathSYSALARMPROGRAM /u/informix/etc/evidence.sh # System Alarm program path TBLSPACE_STATS 1 # System Archive Tape Device TAPEDEV /dev/rmt/1m # Tape device path TAPEBLK 1024 # Tape block size(Kbytes) TAPESIZE 12000000 # Maximum amount of data to put on tape (Kbytes) # Log Archive Tape Device LTAPEDEV /dev/rmt/2m # Log tape device path LTAPEBLK 1024 # Log tapeblock size (Kbytes) LTAPESIZE 4000000 # Max amount of data to put on log tape (Kbytes) # Optical STAGEBLOB # Informix Dynamic Server/Optical staging area # System Configuration SERVERNUM 1 # Unique id corresponding to a Dynamic Server instance DBSERVERNAME ok_srvr # Name of default database server #DBSERVERALIASESok_tcp # List of alternate dbservernames DBSERVERALIASES ok_tcp,ok_strm # List of alternate dbservernames NETTYPE ipcshm,2,150,NET # Configure poll thread(s) for nettype NETTYPE soctcp,2,200,NET # Configure poll thread(s) for nettype NETTYPE ipcstr,1,100,NET # Configure poll thread(s) for nettype DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. RESIDENT 1 # Forced residency flag (Yes = 1, No = 0) MULTIPROCESSOR 1 # 0 forsingle-processor, 1 for multi-processor NUMCPUVPS 2 # Number of user (cpu) vps SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one NOAGE 1 # Process aging AFF_SPROC 0 # Affinity start processor AFF_NPROCS 0 # Affinity number of processors # Shared Memory Parameters LOCKS 350000 # Maximum number of locks BUFFERS 15000 # Maximum number ofshared buffers NUMAIOVPS # Number of IO vps PHYSBUFF 128 # Physical log buffer size (Kbytes) LOGBUFF 128 # Logical log buffer size (Kbytes) LOGSMAX 100 # Maximum number of logical log files CLEANERS 8 # Number of buffer cleaner processes SHMBASE 0x0 # Shared memory base address SHMVIRTSIZE 100000 # initial virtual shared memory segment size SHMADD 40000 # Size of new shared memory segments (Kbytes) SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited CKPTINTVL 300 # Check point interval (in sec) LRUS 8 # Number of LRU queues LRU_MAX_DIRTY 5 # LRU percent dirty begin cleaning limit LRU_MIN_DIRTY 1 # LRU percent dirty end cleaning limit LTXHWM 50 # Long transaction high water mark percentage LTXEHWM 60 # Longtransaction high water mark (exclusive) TXTIMEOUT 0x12c # Transaction timeout (in sec) STACKSIZE 32 # Stack size (Kbytes) OFF_RECVRY_THREADS 10 # Default number of offline worker threads ON_RECVRY_THREADS 5 # Default number of online worker threads DRAUTO 0 # DR automatic switchover DRINTERVAL 30 # DR max time between DR buffer flushes (in sec) DRTIMEOUT 30 # DR network timeout (in sec) DRLOSTFOUND /u/informix/etc/dr.lostfound #DR lost+found file path # CDR Variables CDR_LOGBUFFERS 2048 # size of log reading buffer pool (Kbytes) CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional) CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds) CDR_QUEUEMEM 4096 #Maximum amount of memory for any CDR queue (Kb ytes) # Backup/Restore variables BAR_ACT_LOG /tmp/bar_act.log BAR_MAX_BACKUP 0 BAR_RETRY 1 BAR_NB_XPORT_COUNT 10 BAR_XFER_BUF_SIZE 31 # Informix Storage Manager variables ISM_DATA_POOL ISMData # If the data pool name is changed, be sure to # update $INFORMIXDIR/bin/onbar. Change to ISM_LOG_POOL ISMLogs # Read Ahead Variables RA_PAGES 512 # Number of pages to attempt to read ahead RA_THRESHOLD # Number of pages left before next group DUMPDIR /tmp # Preserve diagnostics in this directory DUMPSHMEM 0 # Dump a copy of shared memory DUMPGCORE 0 # Dump a core image using 'gcore' DUMPCORE 0 # Dump a core image (Warning:this aborts Dynamic Server) DUMPCNT 1 # Number of shared memory or gcore dumps for # a single user's session FILLFACTOR 90 # Fill factor for building indexes # method for Dynamic Server to use when determining current time USEOSTIME 0 # 0: use internal time(fast), 1: get time from O S(slow) # Parallel Database Queries (pdq) MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority DS_MAX_QUERIES # Maximum number of decision support queries DS_TOTAL_MEMORY # Decision support memory (Kbytes) DS_MAX_SCANS 1048576 #Maximum number of decision support scans DATASKIP off # List of dbspaces to skip # OPTCOMPIND 0 # To hint the optimizer ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 = ABORT, 2 = WAITLBU_PRESERVE 0 # Preserve last log for log backup OPCACHEMAX 0 # Maximum optical cache size (Kbytes) # # Optimization goal: -1 = ALL_ROWS(Default), 0 = FIRST_ROWS OPT_GOAL -1 Optimizer DIRECTIVES ON (1/Default) or OFF (0) DIRECTIVES 1 # Status of restartable restore RESTARTABLE_RESTORE off -----------== Posted via Deja News, The Discussion Network ==---------- http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own