Re: ER Connection Issues

If you don't need the software firewall then do service iptables stop chkconfig iptables off -- Clive -- Clive On 7 May 2013, at 16:39, Keith Simmons <smiley73@gmail.com> wrote: > Clive > Many thanks, that done it !! > Need to speak with my hosting supplier about their default level of security !! > > Keith > > > On 7 May 2013 14:01, Clive Eisen <clive@hildebrand.co.uk> wrote: >> Then you need to add an explicit ACCEPT entry in iptables for your sqlexec port >> >> Add it to >> >> /etc/sysconfig/iptables >> >> and do a service iptables restart >> >> -- >> Clive >> >> On 7 May 2013, at 13:51, Keith Simmons wrote: >> >> > Clive >> > No, but it won't take telnet from anywhere on any port, only ssh. >> > Keith >> > >> > >> > On 7 May 2013 13:19, Clive Eisen <clive@hildebrand.co.uk> wrote: >> > Hmnn - that looks ok >> > >> > Can you telnet from the AIX server to the RH server on the sqlexec port? >> > >> > -- >> > Clive >> > >> > >> > On 7 May 2013, at 12:54, Keith Simmons wrote: >> > >> > > Clive >> > > Thanks, output : >> > > iptables --list >> > > Chain INPUT (policy ACCEPT) >> > > target prot opt source destination >> > > ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED >> > > ACCEPT icmp -- anywhere anywhere >> > > ACCEPT all -- anywhere anywhere >> > > ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh >> > > REJECT all -- anywhere anywhere reject-with icmp-host-prohibited >> > > >> > > Chain FORWARD (policy ACCEPT) >> > > target prot opt source destination >> > > REJECT all -- anywhere anywhere reject-with icmp-host-prohibited >> > > >> > > Chain OUTPUT (policy ACCEPT) >> > > target prot opt source destination >> > > >> > > >> > > >> > > On 7 May 2013 12:22, Clive Eisen <clive@hildebrand.co.uk> wrote: >> > > >> > > On 7 May 2013, at 11:49, Keith Simmons wrote: >> > > > I suspect I am running into some security block on the RedHat server (note I can only connect using SSH, sftp etc and not telnet or ftp). >> > > > Any suggestions on what I need to do to enable this connectivity for dbaccess/ER ? >> > > >> > > run iptables --list and see if your sqlexec port is open on the RH server >> > > >> > > -- >> > > Clive >> > > >> > > >> > > >> > >> > >