Re: Remote Access

Hi, We are using the same setup for some of the users so that they can dial in and can work from home. We are using 7.11UC2, INET5.xx and PB3. We have tried the same using Windows3.11 and WIN95. For Windows3.11, we are using Reflection, but have checked Chameleon and is working fine. We are using PPP interface. WIN95 works fine w/o Reflection or Chameleon s/w. You need to configure it for modem /dialup Networking. Using this kind of setup, user can use PB3 application w/o any problems. We do not have any script as such. We do not dial our main server. We dial our network machine, which prompts whether we want ppp or telnet session, we specify ppp and it assigns us some dynamic ipaddress. If you want to run dbaccess or something like terminal emulator, then you can use WINDOWS-->ACCESSORIES-->TERMINAL options and using the menu options or AT commands you can use dialup lines. I hope this information is helpful to you. Regards, Priti -------------------------------------------------------------- You wrote: Hi All, We have a client server application using the informix database on-line 5.07 and Power Builder front-end software. Currently, we have i-star set up on server and i-connection 7.2 set up on the pc , it works fine in the office enviroment, but we also like to set up one pc to be able to remote access from home. We have not yet set the web site up, but we can dail-in from home to use dbaccess and etc. How can we setup on client PC which can remote access the database by using the client-server way (which can run the front-end software). Do we need set up a script on PPP or SLIP? Does anyone have done this before? Thank you in advance. Kam HE e-mail address is khe@direct.ca