cannot read system catalog

--0-1004379464-1102954650=:32339 Content-Type: text/plain; charset=us-ascii Content-Id: Content-Disposition: inline Hi, Using IDS 9.21 UC4. Solaris 8.0 we have this problem with users trying to connect to the database running. it gives the error 'cannot read system catalog (sysprocplan) with an error number of -211. and execute procedure stp_login' with key value locked and an error number of 144. when this locked table is freed the next person logging in locks the database again. any help? attached is the onconfig file. thanks in advance Leona ===== __________________________________ Do you Yahoo!? The all-new My Yahoo! - What will yours do? http://my.yahoo.com --0-1004379464-1102954650=:32339 Content-Type: text/plain; name=onconfgtsun1 Content-Description: onconfgtsun1 Content-Disposition: inline; filename=onconfgtsun1 #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig.std # Description: Informix Dynamic Server 2000 Configuration Parameters # #************************************************************************** # Root Dbspace Configuration ROOTNAME rootdbs # Root dbspace name ROOTPATH /dev/online10_1 # Path for device containing root dbspace ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) ROOTSIZE 2097150 # Size of root dbspace (Kbytes) # Disk Mirroring Configuration Parameters MIRROR 0 # Mirroring flag (Yes = 1, No = 0) MIRRORPATH # Path for device containing mirrored root MIRROROFFSET 0 # Offset into mirrored device (Kbytes) # Physical Log Configuration PHYSDBS rootdbs # Location (dbspace) of physical log PHYSFILE 50000 # Physical log file size (Kbytes) # Logical Log Configuration LOGFILES 800 # Number of logical log files LOGSIZE 5000 # Logical log size (Kbytes) # Diagnostics MSGPATH /usr/acct/informix/log/online.log # System message log file path CONSOLE /dev/console # System console message path ALARMPROGRAM /usr/acct/informix/IDS9.21/etc/log_full.sh # Alarm program path TBLSPACE_STATS 0 # Maintain tblspace statistics # System Archive Tape Device TAPEDEV /dev/rdlt1c #/dev/rdlt2c # Tape device path TAPEBLK 128 # Tape block size (Kbytes) TAPESIZE 70000000 # Maximum amount of data to put on tape (Kbytes) # Log Archive Tape Device LTAPEDEV /dev/rdatc #/dev/rdatc # /dev/rdat # Log tape device path LTAPEBLK 128 # Log tape block size (Kbytes) LTAPESIZE 8000000 # Max amount of data to put on log tape (Kbytes) # Optical STAGEBLOB # Informix Dynamic Server 2000 staging area # System Configuration SERVERNUM 1 # Unique id corresponding to a OnLine instance DBSERVERNAME gtsun1 # Name of default database server DBSERVERALIASES gtsun1net # List of alternate dbservernames NETTYPE tlitcp,1,10,NET # Configure poll thread(s) for nettype NETTYPE ipcstr,1,10,CPU # Configure poll thread(s) for nettype DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. RESIDENT 0 # Forced residency flag (Yes = 1, No = 0) MULTIPROCESSOR 1 # 0 for single-processor, 1 for multi-processor # NUMCPUVPS 3 # Number of user (cpu) vps SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one # NOAGE 1 # Process aging # AFF_SPROC 1 # Affinity start processor # AFF_NPROCS 3 # Affinity number of processors # Shared Memory Parameters LOCKS 2400000 # Maximum number of locks BUFFERS 512000 # Maximum number of shared buffers# NUMAIOVPS 4 # Number of IO vps PHYSBUFF 32 # Physical log buffer size (Kbytes) LOGBUFF 64 # Logical log buffer size (Kbytes)LOGSMAX 1000 # Maximum number of logical log files CLEANERS 4 # Number of buffer cleaner processes SHMBASE 0xa000000 # Shared memory base address SHMVIRTSIZE 294912 # initial virtual shared memory segment size SHMADD 32768 # Size of new shared memory segments (Kbytes) SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited CKPTINTVL 120 # Check point interval (in sec) LRUS 128 # Number of LRU queues LRU_MAX_DIRTY 10 # LRU percent dirty begin cleaning limit LRU_MIN_DIRTY 5 # LRU percent dirty end cleaning limit LTXHWM 50 # Long transaction high water mark percentage LTXEHWM 60 # Long transaction high water mark (exclusive) TXTIMEOUT 0x12c # Transaction timeout (in sec) STACKSIZE 64 # Stack size (Kbytes) # System Page Size # BUFFSIZE - OnLine no longer supports this configuration parameter. # To determine the page size used by OnLine on your platform # see the last line of output from the command, 'onstat -b'. # Recovery Variables # OFF_RECVRY_THREADS: # Number of parallel worker threads during fast recovery or an offline restore. # ON_RECVRY_THREADS: # Number of parallel worker threads during an online restore. OFF_RECVRY_THREADS 10 # Default number of offline worker threads ON_RECVRY_THREADS 1 # Default number of online worker threads # Data Replication Variables DRINTERVAL 30 # DR max time between DR buffer flushes (in sec) DRTIMEOUT 30 # DR network timeout (in sec) DRLOSTFOUND /usr/acct/informix/IDS9.21/dr.lostfound # DR lost+found file path # CDR Variables CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional) CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds) CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)CDR_LOGDELTA 30 # % of log space allowed in queue memory CDR_NUMCONNECT 16 # Expected connections per server CDR_NIFRETRY 300 # Connection retry (seconds) CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none, 9 max) # Backup/Restore variables BAR_ACT_LOG /usr/informix/bar_act.log # ON-Bar Log file - not in /tmp please BAR_DEBUG_LOG /usr/informix/bar_dbug.log # ON-Bar Debug Log - not in /tmp please BAR_MAX_BACKUP 0 BAR_RETRY 1 BAR_NB_XPORT_COUNT 10 BAR_XFER_BUF_SIZE 31 RESTARTABLE_RESTORE off BAR_PROGRESS_FREQ 0 # Informix Storage Manager variables ISM_DATA_POOL ISMData ISM_LOG_POOL ISMLogs # Read Ahead Variables

PLEASE DO NOT POST MIME. "Leona Ankrah" <ayikailey@yahoo.com> wrote > we have this problem with users trying to connect to > the database running. it gives the error > 'cannot read system catalog (sysprocplan) with an > error number of -211. and execute procedure stp_login' > with key value locked and an error number of 144. > when this locked table is freed the next person > logging in locks the database again. > any help? onconfig is of little use in this case. Please email me the code of stored procedure stp_login. The clue to the problem will most likely be in the code itself. Ravi