Re: Onbar fails to restore all dbspaces

jpierrot@chubb.com wrote: > There is a parameter that sets/governs the interval time between the > restore of each dbspace object. In other words, once an object is > restored, the storage manager might pause for a few seconds before > starting the restore of the next dbspace. Don't remember its name and > don't know what is the counterpart in Omniback, check its value and try > increasing it to see if that would do it for you. I have that experience > with TSM/Informix restore where that time interval was set too low and > when the time expires, it just starts to skip the remaining dbspaces but > it would still say in the logs and the ixbar that the dbspace restore > was complete. Not guarantee but worthy taking a look at it. > > bar_act not ixbar file as previously stated > > Good luck! > > jp > > Inactive hide details for Ulf <ulf.akerberg@gmail.com>Ulf > <ulf.akerberg@gmail.com> > > > *Ulf <ulf.akerberg@gmail.com>* > Sent by: informix-list-bounces@iiug.org > > 11/16/2007 02:57 PM > > > > To > > informix-list@iiug.org > > cc > > > Subject > > Onbar fails to restore all dbspaces > > > > > > We are using version 10.00.FC7 on HP-UX 11.11 with Omniback for > backups. > > Backups using onbar -b -w are created for the two dbscapes we have, > the root dbspace > and a smartblobspace. According to the online log and Omniback both > are stored on the backup media. The ixbar tells the same. > > We are not using logical logs, they go to /dev/null. > > When restoring using onbar -r -p -w the root dbspace is restored as it > is supposed to but the smart blobspace is not. the bar_act.log says > that a complete restore has been made. There are no errors in the > online log or the bar_act.log. Have now tried it 10 times with > different settimg, changes in the ixbar file but it still fails to > restore the smart blob space. This is marked as inconsistent, the > instance is useless. > > Any ideas ? > > > Regards > > Ulf > _______________________________________________ > Informix-list mailing list > Informix-list@iiug.org > http://www.iiug.org/mailman/listinfo/informix-list > Can you post the ixbar file? Can you post the output from onstat -g arc from after the archive but before the restore attempt? How do you get back after a failed restore?

On 16 Nov, 22:32, "TBP (The Big Potato)" <T...@NotHere.Co.Uk> wrote: > jpier...@chubb.com wrote: > > There is a parameter that sets/governs the interval time between the > > restore of each dbspace object. In other words, once an object is > > restored, the storage manager might pause for a few seconds before > > starting the restore of the next dbspace. Don't remember its name and > > don't know what is the counterpart in Omniback, check its value and try > > increasing it to see if that would do it for you. I have that experience > > with TSM/Informix restore where that time interval was set too low and > > when the time expires, it just starts to skip the remaining dbspaces but > > it would still say in the logs and the ixbar that the dbspace restore > > was complete. Not guarantee but worthy taking a look at it. > > > bar_act not ixbar file as previously stated > > > Good luck! > > > jp > > > Inactive hide details for Ulf <ulf.akerb...@gmail.com>Ulf > > <ulf.akerb...@gmail.com> > > > *Ulf <ulf.akerb...@gmail.com>* > > Sent by: informix-list-boun...@iiug.org > > > 11/16/2007 02:57 PM > > > To > > > informix-l...@iiug.org > > > cc > > > Subject > > > Onbar fails to restore all dbspaces > > > We are using version 10.00.FC7 on HP-UX 11.11 with Omniback for > > backups. > > > Backups using onbar -b -w are created for the two dbscapes we have, > > the root dbspace > > and a smartblobspace. According to the online log and Omniback both > > are stored on the backup media. The ixbar tells the same. > > > We are not using logical logs, they go to /dev/null. > > > When restoring using onbar -r -p -w the root dbspace is restored as it > > is supposed to but the smart blobspace is not. the bar_act.log says > > that a complete restore has been made. There are no errors in the > > online log or the bar_act.log. Have now tried it 10 times with > > different settimg, changes in the ixbar file but it still fails to > > restore the smart blob space. This is marked as inconsistent, the > > instance is useless. > > > Any ideas ? > > > Regards > > > Ulf > > _______________________________________________ > > Informix-list mailing list > > Informix-l...@iiug.org > >http://www.iiug.org/mailman/listinfo/informix-list > > Can you post the ixbar file? > > Can you post the output from onstat -g arc from after the archive but before the restore attempt? > > How do you get back after a failed restore?- Dölj citerad text - > > - Visa citerad text - The ixbar looks like this (just the last lines) utv10 rootdbs R 1 176 0 12 2007011009 2007-11 -09 03:30:22 1 604 76965694 176 0 - - 604 1194575422 119456672 9 utv10 sbspace1 ND 1 176 0 12 2007011009 2007-11 -09 03:30:22 1 604 76965694 176 0 - - 604 1194575422 119456672 If I try to make a archive to give you the onstat -g arc after the archive it fails to archive the smartblobspace as it marked as Inconsistent. The engine starts after the failed restore but the smartblobsspace is marked as Inconsistent. I can use data in the root dbspace Ulf