Synchronizing IDS between HP Itanium and Risc Ser
A user running IDS 10.00.FC5 on HP-UX Itanium (production) and HP-UX PA-RISC (test) asked how to refresh the test database daily from production, without using Enterprise Replication. Suggestions included dbexport/dbimport, unload/load via pipes, dbload or HPL, insert-into-select across servers, or a remote onbar restore (as one poster does with TSM). Some doubted backup/restore would work across the two architectures, but another reported that HP-UX IA64 and PA-RISC 64-bit IDS are compatible and that he had successfully restored ontape backups from PA-RISC to IA64 (using the native IDS build on each box), with copying data files also possible during downtime. Talk then turned to whether HDR could work across the two platforms, with a link to an IBM support note; no definitive answer from the original poster is recorded.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
We have two installation of IDS 10.00 FC5 one on HP Itanium server
(production) and the other on HP PA Risc server (test).
We use onbar to backup the instance on the itanium server.
Question/Problem: How do we sync the database on the risc server with that on
the Itanium server?
Limitation: ER is not an option
Schedule: We want to do this activity daily as a End of Day activity
Any help will be highly appreciated.
On 07/03/07, PRASAD SHETTY <gr8prasad@hotmail.com> wrote:
> We have two installation of IDS 10.00 FC5 one on HP Itanium server
> (production) and the other on HP PA Risc server (test).
> We use onbar to backup the instance on the itanium server.
> Question/Problem: How do we sync the database on the risc server with that on
> the Itanium server?
> Limitation: ER is not an option
> Schedule: We want to do this activity daily as a End of Day activity
>
> Any help will be highly appreciated.
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
If ER is not an option (why not?) you will have to use
dbexport/dbimport (if you have sufficient shared filestore or a
compatible tape drive on both machines) else SQL unload to pipe/load
from pipe or dbload from pipe or HPL else sql insert into ... select
... from ... else some esoteric insert/update/delete triggers to an
intermediate table and pull these together at the end of the day.
Better still get two matching servers and just run an archive on one
and restore to the other, dead easy and dead quick !!
I have onething in the mind .... Please check this.
Take contineous logical log backup of HP Itanium server .And at the end of
the day using the same tapes please do logical restore on on HP PA Risc
server.
Thanks,
Amitava
"Keith Simmons" <smiley73@googlemail.com>
Sent by: ids-bounces@iiug.org
07/03/2007 17:47
Please respond to
ids@iiug.org
To
ids@iiug.org
cc
Subject
Re: Synchronizing IDS between HP Itanium and R.... [8577]
On 07/03/07, PRASAD SHETTY <gr8prasad@hotmail.com> wrote:
> We have two installation of IDS 10.00 FC5 one on HP Itanium server
> (production) and the other on HP PA Risc server (test).
> We use onbar to backup the instance on the itanium server.
> Question/Problem: How do we sync the database on the risc server with
that
on
> the Itanium server?
> Limitation: ER is not an option
> Schedule: We want to do this activity daily as a End of Day activity
>
> Any help will be highly appreciated.
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
If ER is not an option (why not?) you will have to use
dbexport/dbimport (if you have sufficient shared filestore or a
compatible tape drive on both machines) else SQL unload to pipe/load
from pipe or dbload from pipe or HPL else sql insert into ... select
.... from ... else some esoteric insert/update/delete triggers to an
intermediate table and pull these together at the end of the day.
Better still get two matching servers and just run an archive on one
and restore to the other, dead easy and dead quick !!
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
I do this between several IBM servers on a weekly basis. I move
production to QA boxes and such...however I always have the same OS, so
I'm not sure if that might be an issue.. anyway I do a remote restore
using onbar. I have TSM for my storage manager, so all I have to do is
swap the node and password in the control files. Then when onbar asks for
the tape, it goes to the remote servers tapes. You also have to have the
right ixbar,.xx file on the target server...
PDL
From:
ids-bounces@iiug.org
Recipients:
ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
Subject:
Synchronizing IDS between HP Itanium and Risc Ser [8576]
Date:
07:00:21 AM Today
We have two installation of IDS 10.00 FC5 one on HP Itanium server
(production) and the other on HP PA Risc server (test).
We use onbar to backup the instance on the itanium server.
Question/Problem: How do we sync the database on the risc server with that
on
the Itanium server?
Limitation: ER is not an option
Schedule: We want to do this activity daily as a End of Day activity
Any help will be highly appreciated.
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
On 07/03/07, Amitava Chakraborty <amitacha@in.ibm.com> wrote:
> I have onething in the mind .... Please check this.
>
> Take contineous logical log backup of HP Itanium server .And at the end of
> the day using the same tapes please do logical restore on on HP PA Risc
> server.
>
> Thanks,
> Amitava
>
> "Keith Simmons" <smiley73@googlemail.com>
> Sent by: ids-bounces@iiug.org
> 07/03/2007 17:47
> Please respond to
> ids@iiug.org
>
> To
> ids@iiug.org
> cc
>
> Subject
> Re: Synchronizing IDS between HP Itanium and R.... [8577]
>
> On 07/03/07, PRASAD SHETTY <gr8prasad@hotmail.com> wrote:
> > We have two installation of IDS 10.00 FC5 one on HP Itanium server
> > (production) and the other on HP PA Risc server (test).
> > We use onbar to backup the instance on the itanium server.
> > Question/Problem: How do we sync the database on the risc server with
> that
> on
> > the Itanium server?
> > Limitation: ER is not an option
> > Schedule: We want to do this activity daily as a End of Day activity
> >
> > Any help will be highly appreciated.
> >
> >
> >
>
>
*******************************************************************************
>
> > Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
> If ER is not an option (why not?) you will have to use
> dbexport/dbimport (if you have sufficient shared filestore or a
> compatible tape drive on both machines) else SQL unload to pipe/load
> from pipe or dbload from pipe or HPL else sql insert into ... select
> ..... from ... else some esoteric insert/update/delete triggers to an
> intermediate table and pull these together at the end of the day.
> Better still get two matching servers and just run an archive on one
> and restore to the other, dead easy and dead quick !!
>
>
Not much chance of this! Surely PA-RISC and Itanium run on totally
different processors and the O/S s are binary incompatible therefore
there is no way an archive from one would restore on the other. Also
you would need to leave the test system in a constant state of restore
in preparation for the next tape full of logs. This would prevent all
access to the data thus making the whole server just so much tin
consuming electricity !
Keith
On 07/03/07, Peter_Logan@spartanstores.com
<Peter_Logan@spartanstores.com> wrote:
> I do this between several IBM servers on a weekly basis. I move
> production to QA boxes and such...however I always have the same OS, so
> I'm not sure if that might be an issue.. anyway I do a remote restore
> using onbar. I have TSM for my storage manager, so all I have to do is
> swap the node and password in the control files. Then when onbar asks for
> the tape, it goes to the remote servers tapes. You also have to have the
> right ixbar,.xx file on the target server...
>
> PDL
>
> From:
> ids-bounces@iiug.org
> Recipients:
> ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
> Subject:
> Synchronizing IDS between HP Itanium and Risc Ser [8576]
> Date:
> 07:00:21 AM Today
>
> We have two installation of IDS 10.00 FC5 one on HP Itanium server
> (production) and the other on HP PA Risc server (test).
> We use onbar to backup the instance on the itanium server.
> Question/Problem: How do we sync the database on the risc server with that
> on
> the Itanium server?
> Limitation: ER is not an option
> Schedule: We want to do this activity daily as a End of Day activity
>
> Any help will be highly appreciated.
>
onbar and ontape both require identical (or very close versions) of
the same OS on similar hardware and identical versions of IDS in order
to restore. I don't think PA-Risc and Itanium are close enough !
Keith
Hi,
HPUX IA64 and HPUX PA-Risc (64bit IDS version) are compatible.
If the IDS versions are the same on both machines you can backup
on one server and restore to the other - this works at least
with ontape and from PA-Risc to IA64. We have used that several
times for migration from PA-Risc to IA64.
But you have to use the native IDS version on both machines - the
IDS HPUX IA64 version on the Itanium box and the IDS HPUX PA-Risc 64bit
version on the PA-Risc box.
If you have a downtime on the production system you could even copy
the datafiles/raw devices.
Regards,
Andreas
>
-------------------------------------------
SPAR Österreichische Warenhandels-AG
Hauptzentrale
A - 5015 Salzburg, Europastrasse 3
FN 34170 a
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
Wichtiger Hinweis: Der Inhalt dieser E-Mail kann vertrauliche und rechtlich
geschützte Informationen, insbesondere Betriebs- oder Geschäftsgeheimnisse,
enthalten, zu deren Geheimhaltung der Empfänger verpflichtet ist. Die
Informationen in dieser E-Mail sind ausschließlich für den Adressaten
bestimmt. Sollten Sie die E-Mail irrtümlich erhalten haben so ersuchen wir
Sie, die Nachricht von Ihrem System zu löschen und sich mit uns in Verbindung
zu setzen.
Über das Internet versandte E-Mails können leicht manipuliert oder unter
fremdem Namen erstellt werden. Daher schließen wir die rechtliche
Verbindlichkeit der in dieser Nachricht enthaltenen Informationen aus. Der
Inhalt der E-Mail ist nur rechtsverbindlich, wenn er von uns schriftlich
bestätigt und gezeichnet wird.
Sollte trotz der von uns verwendeten Virus-Schutzprogramme durch die Zusendung
von E-Mails ein Virus in Ihre Systeme gelangen, haften wir nicht für evtl.
hieraus entstehende Schäden.
Wir danken für Ihr Verständnis.
Important notice: The contents of this e-mail may contain confidential and
legally protected information that is in particular related to operational and
trade secrets, which the recipient is obliged to treat as confidential. The
information in this e-mail is made available exclusively for use by the
addressee. In the event that the e-mail may have been sent to you in error, we
would ask you to kindly delete this communication from your system and to
contact us.
E-mails sent via the Internet can be easily manipulated or sent out under
someone else's name. We therefore do not accept legal liability for the
information contained in this communication. The contents of the e-mail are
only legally binding if they have been confirmed and signed by us in writing.
If, in spite of our using Antivirus protection software, a virus may have
penetrated your system through the sending of this e-mail, we do not accept
liability for any damage that may possibly arise as a result of this.
We trust that you appreciate our position.
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]Im Auftrag von
> Keith Simmons
> Gesendet: Mittwoch, 07. März 2007 14:56
> An: ids@iiug.org
> Betreff: Re: Synchronizing IDS between HP Itanium and R.... [8582]
>
>
> On 07/03/07, Peter_Logan@spartanstores.com
> <Peter_Logan@spartanstores.com> wrote:
> > I do this between several IBM servers on a weekly basis. I move
> > production to QA boxes and such...however I always have the
> same OS, so
> > I'm not sure if that might be an issue.. anyway I do a
> remote restore
> > using onbar. I have TSM for my storage manager, so all I
> have to do is
> > swap the node and password in the control files. Then when
> onbar asks for
> > the tape, it goes to the remote servers tapes. You also
> have to have the
> > right ixbar,.xx file on the target server...
> >
> > PDL
> >
> > From:
> > ids-bounces@iiug.org
> > Recipients:
> > ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
> > Subject:
> > Synchronizing IDS between HP Itanium and Risc Ser [8576]
> > Date:
> > 07:00:21 AM Today
> >
> > We have two installation of IDS 10.00 FC5 one on HP Itanium server
> > (production) and the other on HP PA Risc server (test).
> > We use onbar to backup the instance on the itanium server.
> > Question/Problem: How do we sync the database on the risc
> server with that
> > on
> > the Itanium server?
> > Limitation: ER is not an option
> > Schedule: We want to do this activity daily as a End of Day
> activity
> >
> > Any help will be highly appreciated.
> >
> onbar and ontape both require identical (or very close versions) of
> the same OS on similar hardware and identical versions of IDS
> in order
> to restore. I don't think PA-Risc and Itanium are close enough !
>
> Keith
>
>
> **************************************************************
> *****************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
If this is true, it may be possible to HADR between PA-RISC & Itanium. Has
anyone tried?
--EEM
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
Andreas.KUTSCHE@spar.at
Sent: Wednesday, March 07, 2007 8:24 AM
To: ids@iiug.org
Subject: AW: Synchronizing IDS between HP Itanium and R.... [8584]
Hi,
HPUX IA64 and HPUX PA-Risc (64bit IDS version) are compatible.
If the IDS versions are the same on both machines you can backup
on one server and restore to the other - this works at least
with ontape and from PA-Risc to IA64. We have used that several
times for migration from PA-Risc to IA64.
But you have to use the native IDS version on both machines - the
IDS HPUX IA64 version on the Itanium box and the IDS HPUX PA-Risc 64bit
version on the PA-Risc box.
If you have a downtime on the production system you could even copy
the datafiles/raw devices.
Regards,
Andreas
>
-------------------------------------------
SPAR Österreichische Warenhandels-AG
Hauptzentrale
A - 5015 Salzburg, Europastrasse 3
FN 34170 a
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
Wichtiger Hinweis: Der Inhalt dieser E-Mail kann vertrauliche und rechtlich
geschützte Informationen, insbesondere Betriebs- oder Geschäftsgeheimnisse,
enthalten, zu deren Geheimhaltung der Empfänger verpflichtet ist. Die
Informationen in dieser E-Mail sind ausschließlich für den Adressaten
bestimmt. Sollten Sie die E-Mail irrtümlich erhalten haben so ersuchen wir
Sie, die Nachricht von Ihrem System zu löschen und sich mit uns in Verbindung
zu setzen.
Über das Internet versandte E-Mails können leicht manipuliert oder unter
fremdem Namen erstellt werden. Daher schließen wir die rechtliche
Verbindlichkeit der in dieser Nachricht enthaltenen Informationen aus. Der
Inhalt der E-Mail ist nur rechtsverbindlich, wenn er von uns schriftlich
bestätigt und gezeichnet wird.
Sollte trotz der von uns verwendeten Virus-Schutzprogramme durch die Zusendung
von E-Mails ein Virus in Ihre Systeme gelangen, haften wir nicht für evtl.
hieraus entstehende Schäden.
Wir danken für Ihr Verständnis.
Important notice: The contents of this e-mail may contain confidential and
legally protected information that is in particular related to operational and
trade secrets, which the recipient is obliged to treat as confidential. The
information in this e-mail is made available exclusively for use by the
addressee. In the event that the e-mail may have been sent to you in error, we
would ask you to kindly delete this communication from your system and to
contact us.
E-mails sent via the Internet can be easily manipulated or sent out under
someone else's name. We therefore do not accept legal liability for the
information contained in this communication. The contents of the e-mail are
only legally binding if they have been confirmed and signed by us in writing.
If, in spite of our using Antivirus protection software, a virus may have
penetrated your system through the sending of this e-mail, we do not accept
liability for any damage that may possibly arise as a result of this.
We trust that you appreciate our position.
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]Im Auftrag von
> Keith Simmons
> Gesendet: Mittwoch, 07. März 2007 14:56
> An: ids@iiug.org
> Betreff: Re: Synchronizing IDS between HP Itanium and R.... [8582]
>
>
> On 07/03/07, Peter_Logan@spartanstores.com
> <Peter_Logan@spartanstores.com> wrote:
> > I do this between several IBM servers on a weekly basis. I move
> > production to QA boxes and such...however I always have the
> same OS, so
> > I'm not sure if that might be an issue.. anyway I do a
> remote restore
> > using onbar. I have TSM for my storage manager, so all I
> have to do is
> > swap the node and password in the control files. Then when
> onbar asks for
> > the tape, it goes to the remote servers tapes. You also
> have to have the
> > right ixbar,.xx file on the target server...
> >
> > PDL
> >
> > From:
> > ids-bounces@iiug.org
> > Recipients:
> > ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
> > Subject:
> > Synchronizing IDS between HP Itanium and Risc Ser [8576]
> > Date:
> > 07:00:21 AM Today
> >
> > We have two installation of IDS 10.00 FC5 one on HP Itanium server
> > (production) and the other on HP PA Risc server (test).
> > We use onbar to backup the instance on the itanium server.
> > Question/Problem: How do we sync the database on the risc
> server with that
> > on
> > the Itanium server?
> > Limitation: ER is not an option
> > Schedule: We want to do this activity daily as a End of Day
> activity
> >
> > Any help will be highly appreciated.
> >
> onbar and ontape both require identical (or very close versions) of
> the same OS on similar hardware and identical versions of IDS
> in order
> to restore. I don't think PA-Risc and Itanium are close enough !
>
> Keith
>
>
> **************************************************************
> *****************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
Everett Mills said:
> If this is true, it may be possible to HADR between PA-RISC & Itanium. Has
> anyone tried?
I believe there is a bug^H^H^H^Hn undocumented feature.
> -----Original Message-----
> From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
> Andreas.KUTSCHE@spar.at
> Sent: Wednesday, March 07, 2007 8:24 AM
> To: ids@iiug.org
> Subject: AW: Synchronizing IDS between HP Itanium and R.... [8584]
>
> Hi,
>
> HPUX IA64 and HPUX PA-Risc (64bit IDS version) are compatible.
> If the IDS versions are the same on both machines you can backup
> on one server and restore to the other - this works at least
> with ontape and from PA-Risc to IA64. We have used that several
> times for migration from PA-Risc to IA64.
> But you have to use the native IDS version on both machines - the
> IDS HPUX IA64 version on the Itanium box and the IDS HPUX PA-Risc 64bit
> version on the PA-Risc box.
>
> If you have a downtime on the production system you could even copy
> the datafiles/raw devices.
>
> Regards,
> Andreas
>
>>
> -------------------------------------------
> SPAR Österreichische Warenhandels-AG
> Hauptzentrale
> A - 5015 Salzburg, Europastrasse 3
> FN 34170 a
>
> Tel: +43 662 4470 24223
> Mobile: +43 664 6259575
> E-Mail: Andreas.KUTSCHE@spar.at
> Internet: http://www.spar.at
>
> Wichtiger Hinweis: Der Inhalt dieser E-Mail kann vertrauliche und
> rechtlich
> geschützte Informationen, insbesondere Betriebs- oder
> Geschäftsgeheimnisse,
> enthalten, zu deren Geheimhaltung der Empfänger verpflichtet ist. Die
> Informationen in dieser E-Mail sind ausschließlich für den Adressaten
> bestimmt. Sollten Sie die E-Mail irrtümlich erhalten haben so ersuchen wir
> Sie, die Nachricht von Ihrem System zu löschen und sich mit uns in
> Verbindung
> zu setzen.
> Über das Internet versandte E-Mails können leicht manipuliert oder unter
> fremdem Namen erstellt werden. Daher schließen wir die rechtliche
> Verbindlichkeit der in dieser Nachricht enthaltenen Informationen aus. Der
> Inhalt der E-Mail ist nur rechtsverbindlich, wenn er von uns schriftlich
> bestätigt und gezeichnet wird.
> Sollte trotz der von uns verwendeten Virus-Schutzprogramme durch die
> Zusendung
> von E-Mails ein Virus in Ihre Systeme gelangen, haften wir nicht für evtl.
> hieraus entstehende Schäden.
> Wir danken für Ihr Verständnis.
>
> Important notice: The contents of this e-mail may contain confidential and
> legally protected information that is in particular related to operational
> and
> trade secrets, which the recipient is obliged to treat as confidential.
> The
> information in this e-mail is made available exclusively for use by the
> addressee. In the event that the e-mail may have been sent to you in
> error, we
> would ask you to kindly delete this communication from your system and to
> contact us.
> E-mails sent via the Internet can be easily manipulated or sent out under
> someone else's name. We therefore do not accept legal liability for the
> information contained in this communication. The contents of the e-mail
> are
> only legally binding if they have been confirmed and signed by us in
> writing.
> If, in spite of our using Antivirus protection software, a virus may have
> penetrated your system through the sending of this e-mail, we do not
> accept
> liability for any damage that may possibly arise as a result of this.
> We trust that you appreciate our position.
>
> -------------------------------------------
> -----Ursprüngliche Nachricht-----
>
>> Von: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]Im Auftrag von
>> Keith Simmons
>> Gesendet: Mittwoch, 07. März 2007 14:56
>> An: ids@iiug.org
>> Betreff: Re: Synchronizing IDS between HP Itanium and R.... [8582]
>>
>>
>> On 07/03/07, Peter_Logan@spartanstores.com
>> <Peter_Logan@spartanstores.com> wrote:
>> > I do this between several IBM servers on a weekly basis. I move
>> > production to QA boxes and such...however I always have the
>> same OS, so
>> > I'm not sure if that might be an issue.. anyway I do a
>> remote restore
>> > using onbar. I have TSM for my storage manager, so all I
>> have to do is
>> > swap the node and password in the control files. Then when
>> onbar asks for
>> > the tape, it goes to the remote servers tapes. You also
>> have to have the
>> > right ixbar,.xx file on the target server...
>> >
>> > PDL
>> >
>> > From:
>> > ids-bounces@iiug.org
>> > Recipients:
>> > ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
>> > Subject:
>> > Synchronizing IDS between HP Itanium and Risc Ser [8576]
>> > Date:
>> > 07:00:21 AM Today
>> >
>> > We have two installation of IDS 10.00 FC5 one on HP Itanium server
>> > (production) and the other on HP PA Risc server (test).
>> > We use onbar to backup the instance on the itanium server.
>> > Question/Problem: How do we sync the database on the risc
>> server with that
>> > on
>> > the Itanium server?
>> > Limitation: ER is not an option
>> > Schedule: We want to do this activity daily as a End of Day
>> activity
>> >
>> > Any help will be highly appreciated.
>> >
>> onbar and ontape both require identical (or very close versions) of
>> the same OS on similar hardware and identical versions of IDS
>> in order
>> to restore. I don't think PA-Risc and Itanium are close enough !
>>
>> Keith
>>
>>
>> **************************************************************
>> *****************
>> Forum Note: Use "Reply" to post a response in the discussion forum.
>>
>>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
> --
> This message has been scanned for viruses and
> dangerous content by OpenProtect(http://www.openprotect.com), and is
> believed to be clean.
>
--
Bye now,
Obnoxio
"I'm astonished anyone pays real money for this crap."
-- Cosmo
--
This message has been scanned for viruses and
dangerous content by OpenProtect(http://www.openprotect.com), and is
believed to be clean.
http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=DB520&uid=swg2
1255891&loc=en_US&cs=UTF-8&lang=en&rss=ct630db2
Or
http://tinyurl.com/35q949
Anup
Everett Mills <eemills@nationalbeef.com> wrote:
If this is true, it may be possible to HADR between PA-RISC & Itanium. Has
anyone tried?
--EEM
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
Andreas.KUTSCHE@spar.at
Sent: Wednesday, March 07, 2007 8:24 AM
To: ids@iiug.org
Subject: AW: Synchronizing IDS between HP Itanium and R.... [8584]
Hi,
HPUX IA64 and HPUX PA-Risc (64bit IDS version) are compatible.
If the IDS versions are the same on both machines you can backup
on one server and restore to the other - this works at least
with ontape and from PA-Risc to IA64. We have used that several
times for migration from PA-Risc to IA64.
But you have to use the native IDS version on both machines - the
IDS HPUX IA64 version on the Itanium box and the IDS HPUX PA-Risc 64bit
version on the PA-Risc box.
If you have a downtime on the production system you could even copy
the datafiles/raw devices.
Regards,
Andreas
>
-------------------------------------------
SPAR Österreichische Warenhandels-AG
Hauptzentrale
A - 5015 Salzburg, Europastrasse 3
FN 34170 a
Tel: +43 662 4470 24223
Mobile: +43 664 6259575
E-Mail: Andreas.KUTSCHE@spar.at
Internet: http://www.spar.at
Wichtiger Hinweis: Der Inhalt dieser E-Mail kann vertrauliche und rechtlich
geschützte Informationen, insbesondere Betriebs- oder Geschäftsgeheimnisse,
enthalten, zu deren Geheimhaltung der Empfänger verpflichtet ist. Die
Informationen in dieser E-Mail sind ausschließlich für den Adressaten
bestimmt. Sollten Sie die E-Mail irrtümlich erhalten haben so ersuchen wir
Sie, die Nachricht von Ihrem System zu löschen und sich mit uns in Verbindung
zu setzen.
Über das Internet versandte E-Mails können leicht manipuliert oder unter
fremdem Namen erstellt werden. Daher schließen wir die rechtliche
Verbindlichkeit der in dieser Nachricht enthaltenen Informationen aus. Der
Inhalt der E-Mail ist nur rechtsverbindlich, wenn er von uns schriftlich
bestätigt und gezeichnet wird.
Sollte trotz der von uns verwendeten Virus-Schutzprogramme durch die Zusendung
von E-Mails ein Virus in Ihre Systeme gelangen, haften wir nicht für evtl.
hieraus entstehende Schäden.
Wir danken für Ihr Verständnis.
Important notice: The contents of this e-mail may contain confidential and
legally protected information that is in particular related to operational and
trade secrets, which the recipient is obliged to treat as confidential. The
information in this e-mail is made available exclusively for use by the
addressee. In the event that the e-mail may have been sent to you in error, we
would ask you to kindly delete this communication from your system and to
contact us.
E-mails sent via the Internet can be easily manipulated or sent out under
someone else's name. We therefore do not accept legal liability for the
information contained in this communication. The contents of the e-mail are
only legally binding if they have been confirmed and signed by us in writing.
If, in spite of our using Antivirus protection software, a virus may have
penetrated your system through the sending of this e-mail, we do not accept
liability for any damage that may possibly arise as a result of this.
We trust that you appreciate our position.
-------------------------------------------
-----Ursprüngliche Nachricht-----
> Von: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]Im Auftrag von
> Keith Simmons
> Gesendet: Mittwoch, 07. März 2007 14:56
> An: ids@iiug.org
> Betreff: Re: Synchronizing IDS between HP Itanium and R.... [8582]
>
>
> On 07/03/07, Peter_Logan@spartanstores.com
>
wrote:
> > I do this between several IBM servers on a weekly basis. I move
> > production to QA boxes and such...however I always have the
> same OS, so
> > I'm not sure if that might be an issue.. anyway I do a
> remote restore
> > using onbar. I have TSM for my storage manager, so all I
> have to do is
> > swap the node and password in the control files. Then when
> onbar asks for
> > the tape, it goes to the remote servers tapes. You also
> have to have the
> > right ixbar,.xx file on the target server...
> >
> > PDL
> >
> > From:
> > ids-bounces@iiug.org
> > Recipients:
> > ids@iiug.org, (bcc: Peter Logan/Corporate/Spartan)
> > Subject:
> > Synchronizing IDS between HP Itanium and Risc Ser [8576]
> > Date:
> > 07:00:21 AM Today
> >
> > We have two installation of IDS 10.00 FC5 one on HP Itanium server
> > (production) and the other on HP PA Risc server (test).
> > We use onbar to backup the instance on the itanium server.
> > Question/Problem: How do we sync the database on the risc
> server with that
> > on
> > the Itanium server?
> > Limitation: ER is not an option
> > Schedule: We want to do this activity daily as a End of Day
> activity
> >
> > Any help will be highly appreciated.
> >
> onbar and ontape both require identical (or very close versions) of
> the same OS on similar hardware and identical versions of IDS
> in order
> to restore. I don't think PA-Risc and Itanium are close enough !
>
> Keith
>
>
> **************************************************************
> *****************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.