Re: Wyse 325 Colour Termcap

In <1on5obINNdhs@lily.csv.warwick.ac.uk> mautb@csv.warwick.ac.uk (Mr K D Robinson) writes: >Re earlier problems with Wyse 60 Termcaps. We are running Informix Online 4.10 >and our users will be running mixes of JSB multiview under windows emulating >ANSI, and Wyse 325 colour terminals. Obviously we would like the Wyse >terminals to (one of my colleagues has just shouted 'work' in the background) >to appear essentially the same in one of their ansi personalities. Nothing >yet tried even manages to run r4gl properly. Any ideas? Fyi we are running >SCO Unix 3.4.2 THE FOLLOWING IS FROM THE EMORY UNIVERITY INFORMIX ARCHIVES... TechInfo # 4110 Short Description: TERMCAP Wyse Terminals Long Description: wyse termcap entries for using Informix on Wyse terminals Last Changed: February 9, 1993 This file is a collection of termcap entries submitted by Informix users and/or grabbed off of the Net. They have been accumulated here without testing or editing, so of course "your mileage may vary." The entries in this file support the following terminals, windows and environments (listed in the order in which they appear in this file): o WYSE60 with graphics and informix controls defined o Wyse350 color terminal o Wyse-60, Wyse-120, Wyse-150, and Wyse-160 terminals emulating VT100's. o Wyse-60 in "Wyse-60" mode o Wyse VT100 emulation or Procomm VT102 o Altos IV (also a Wyse 50) Send any termcap or terminfo entries to be added to this collection to walt@mathcs.emory.edu or {...,gatech,rutgers,uunet}!emory!walt. ============================================================================== >From: wengland@stephsf.com (Bill England) Date: 2 Jun 92 20:09:33 GMT WI|wy60inf|wyse60inf|WYSE60 with graphics and informix controls defined.:\\ :ms:bs:\\ :co#80:li#24:\\ :sg#0:\\ :cl=100\\E*:\\ :cm=\\Ea%i%dR%dC:\\ :nd=\\f:up=^K:\\ :so=\\EG4:se=\\EG0:us=\\EG8:ue=\\EG0:\\ :is=\\E`\\072\\Ee(\\EO\\Ee6\\Ec41\\E~4\\Ec21\\Ed/\\EZ1+\\E[A\\177\\EZ1,\\E[B\\177\\EZ1-\\E[D\\177\\EZ1.\\E[C\\177\\EZ1\\\\\\E[F\\177\\EZ1q\\E[L\\177\\Ec72:\\ :ti=\\EZ1+\\E[A\\177\\EZ1,\\E[B\\177\\EZ1-\\E[D\\177\\EZ1.\\E[C\\177\\EZ1\\\\\\E[F\\177\\EZ1q\\E[L\\177:\\ :cs=9\\E[%i%d;%dr:\\ :al=4\\EE:dl=5\\ER:\\ :kb=\\b:ku=\\E[A:kd=\\E[B:kr=\\E[C:kl=\\E[D:kh=^~:\\ :k0=^AI\\r:k1=^A@\\r:k2=^AA\\r:k3=^AB\\r:k4=^AC\\r: \\ :k5=^AD\\r:k6=^AE\\r:k7=^AF\\r:k8=^AG\\r:\\ :k9=^AH\\r:kA=^AI\\r:kB=^AJ\\r:kC=^AK\\r:\\ :gs=\\EH^B:ge=\\EH^C:\\:gb=rqsuzv:\\ :ZG#0:\\ :ZA=\\EG%'0'%?%p1%{7}%=%t%{1}%|%e%p1%{3}%>%p1%{7}%<%&%t%{64}%|%;%;%?%p2%t%{4}%|%;%?%p3%t%{2}%|%;%?%p4%t%{8}%|%;%c: -- +- Bill England, wengland@stephsf.COM -----------------------------------+ | * * H -> He +24MeV | | * * * ... Oooo, we're having so much fun making itty bitty suns * | |__ * * ___________________________________________________________________| ------------------------------------------------------------------------------ >From: bob@worms-emh2.army.mil ("Robert F. Kane") Date: 3 Jun 92 13:48:07 GMT # # Wyse350 color terminal # ZZ|wy350|wyse350|Wyse technology model WY350:\\ :is=\\E%?:vs=\\E%?:\\ :co#80:li#24:bs:am:\\ :al=\\EE:dl=\\ER:do=^J:nd=^L:up=^K:\\ :cr=^M:nl=^J:do=^J:bl=^G:ta=^I:\\ :im=\\Eq:ei=\\Er:dc=\\EW:ho=\\E{:cl=\\E+:\\ :ce=\\ET:\\ :us=\\EGt:ue=\\EG0:ug#1:\\ :so=\\EG4:se=\\EG0:sg#1:\\ :kh=^^:ku=^K:kd=^J:kr=^L:kl=^H:kb=\\177:\\ :cm=\\E=%+ %+ :\\ :hs:ts=\\Ef:\\fs=^M:\\ :k0=^A@^M:k1=^AA^M:k2=^AB^M:k3=^AC^M:k4=^AD^M:\\ :k5=^AE^M:k6=^AF^M:k7=^AG^M:k8=^AH^M:k9=^AI^M:\\ :kA=^AJ^M:kB=^AK^M:kC=^AL^M:kD=^AM^M:kE=^AN^M:\\ :kF=^AO^M:\\ :kG=^A`^M:kH=^Aa^M:kI=^Ab^M:kJ=^Ac^M:kK=^Ad^M:\\ :kL=^Ae^M:kM=^Af^M:kN=^Ag^M:kO=^Ah^M:kP=^Ai^M:\\ :kQ=^Aj^M:kR=^Ak^M:kS=^Al^M:kT=^Am^M:kU=^An^M:\\ :kV=^Ao^M:\\ :l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\\ :l5=F6:l6=F7:l7=F8:l8=F9:l9=F9:\\ :gs=\\EH^B:ge=\\EH^C:gb=2135\\0726:\\ :ZB:ZG#1:ZA=%?%p1%{0}%=%t%'0'%e%p1%{1}%=%t%'<'%e%p1%{2}%=%t%'t'%e%p1%{3}%=%t%'4'%e%p1%{4}%=%t%'x'%e%p1%{5}%=%t%'8'%e%p1%{6}%=%t%'p'%e%p1%{7}%=%t%'1'%;%?%p2%t%Sz%'4'%;%;%?%p3%t%{2}%+%;\\EG%c: # ZA= # %?%p1%{0}%=%t%'0' # encode color number # %e%p1%{1}%=%t%'<' # %e%p1%{2}%=%t%'t' # %e%p1%{3}%=%t%'4' # %e%p1%{4}%=%t%'x' # %e%p1%{5}%=%t%'8' # %e%p1%{6}%=%t%'p' # %e%p1%{7}%=%t%'1' # %; # %?%p2%t%Sz%'4'%;%; # %?%p3%t%{2}%+%; -- Bob Kane Internet: bob@worms-emh2.army.mil (IP 134.235.9.2) TechDyn Systems Voice: (049) 6241-75936 (WORMS, GERMANY) CMR 421, BOX 706 Fax: (049) 6241-500154 APO AE 09056 ------------------------------------------------------------------------------ >From: dave@cdin-1.compu.com Date: 15 Jul 92 13:58:05 GMT Quoting John Baker, Lex-Blue Grass Army Depot... > > I'm using the termcap file supplied by Informix (version 4.0). We are > using Wyse-75 terminals set to emulate vt100. The Unix TERM is set to > vt100. INFORMIXTERM was not set, so according to the manual it will use > termcap. > > Everything works just fine except that I can't get blinking or underlining > to work. When I code "color = underline" or "blink" in a .per screen form, > the display always comes out in reverse video. I also get only reverse video > when I code "display .... attribute (underline)" or "attribute (blink)." > John, we use wyse-60, wyse-120, wyse-150, and wyse-160 terminals here all emulating a vt100. This is the termcap entry we use that works flawlessly. Here --------- Snip Here --------- Snip Here --------- Snip Here --------- Snip wysevt|procomm|Wyse VT100 emulation or Procomm VT102:\\ :am:co#80:li#24:cl=50\\E[;H\\E[2J:bs:cm=5\\E[%i%d;%dH:nd=2\\E[C:up=2\\E[A:\\ :ce=3\\E[K:cd=50\\E[J:so=2\\E[7m:se=2\\E[m:us=2\\E[4m:ue=2\\E[m:\\ :is=\\E>\\E[?1l\\E[?3l\\E[?4l\\E[?5l\\E[?7h\\E[?8h:\\ :if=/usr/lib/tabset/vt100:ku=\\E[A:kd=\\E[B:kr=\\E[C:kl=\\E[D:\\ :kh=\\E[H:k0=\\EOP:k1=\\EOQ:k2=\\EOR:k3=\\EOS:pt:xn:sr=5\\EM:\\ :k4=\\EOt:k5=\\EOu:k6=\\EOv:k7=\\EOl:\\ :k8=\\EOw:k9=\\EOx:kA=\\E[23~:kB=\\E[24~:\\ :ks=\\E\\075:ke=\\E\\076:\\ :mb=\\E[5m:md=\\E[1m:me=\\E[0m:\\ :GS=\\E(0:GE=\\E(B:\\ :GV=x:GH=q:G1=k:G2=l:G3=m:G4=j:GU=v:\\ :GD=w:GC=n:GL=u:GR=t:\\ :CL=\\EOP:CR=\\EOQ:WL=\\EOR:WR=\\EOS:\\ :UK=\\E[A:DK=\\E[B:LK=\\E[D:RK=\\E[C:\\ :PN=\\E[5i:PS=\\E[4i:\\ :cs=%i\\E[%2;%2r:\\ :gs=\\E(0:ge=\\E(B:gb=lmkjqx:\\ :ZG#0:ZA=%'0'%?%p1%{0}%=%t%{0}%+%e%p1%{1}%=%t%{1}%+%e%p1%{2}%=%t%{1}%+%e%p1%{3}%=%t%{1}%+%e%p1%{4}%=%t%{2}%+%e%p1%{5}%=%t%{2}%+%e%p1%{6}%=%t%{2}%+%e%p1%{7}%=%t%{8}%+%;\\E[%cm%;%?%p2%t\\E[7m%;%?%p3%t\\E[5m%;%?%p4%t\\E[4m%;: Here --------- Snip Here --------- Snip Here --------- Snip Here --------- Snip Just wedge this into the file pointed to by the variable TERMCAP and set your T