Re: RAID01 or RAID10 (Please ART)

Guillermo G'mez Valc'rcel wrote: > Is there anybody that can say me if I have configured RAID01 or RAID10 with > this output of metastat SDS command? > I dont't remember if I apply first stripe or mirror. > Thanks in advance, Guillermo. Hi, I think you are using Raid 01 because your Mirror consists of two Submirrors, each of them with a stripe 0 on 4 disks. Johann > > > infx/d100: Mirror > Submirror 0: infx/d101 > State: Okay > Submirror 1: infx/d102 > State: Okay > Pass: 1 > Read option: roundrobin (default) > Write option: parallel (default) > Size: 141131776 blocks > > infx/d101: Submirror of infx/d100 > State: Okay > Size: 141131776 blocks > Stripe 0: (interlace: 32 blocks) > Device Start Block Dbase State Hot Spare > d4s0 0 No Okay > d5s0 0 No Okay > d6s0 0 No Okay > d7s0 0 No Okay > > > infx/d102: Submirror of infx/d100 > State: Okay > Size: 141131776 blocks > Stripe 0: (interlace: 32 blocks) > Device Start Block Dbase State Hot Spare > d10s0 0 No Okay > d11s0 0 No Okay > d12s0 0 No Okay > d13s0 0 No Okay > > ******************************************************************** > > sending to informix-list -- ****************************************************** Tele Atlas Deutschland GmbH Dept: ICT-DEU Am Neuen Horizont 1 D-31177 Harsum Tel: +49 5127 408-465 Fax: +49 5127 408-559 E-mail: Johann.Eggers@teleatlas.com ****************************************************** sending to informix-list