<No Subject Supplied>

7.14.93 I thought I had posted this to the net but I didn't receive any replies back so I must not have. BTW-welcome back from the WIUG meeting those of you lucky enough to be able to go. I'm running into a problem with the tbcheck -pe utility on an OL 5.0 UC2 plat- form. I believe the problem stems from the fact that I have BLOBs stored in a BLOBspace. I fire off the command and it eventually core dumps after displaying the following error messages: ISAM error: cannot allocate memory (it is not preceeded by -116) Memory fault Before dumping core I do get two warning messages about tables exceeding 8 extents. I ran a continuous sar -r while the tbcheck was running and saw almost no impact on the system by running the tbcheck--I had plenty of system RAM. I also ran a continuous tbstat -u on my process and according to the status flags the process was "reading" from time to time by the nreads column didn't increase. A sar report on the processor however showed it maxed out at 97% usr overhead. Has anyone else seen anything like this before? Is it a bug with BLOBspaces? Has it been fixed? Thanks in advance for any info. Carlton ============================================================================ Carlton Doe Spectrum Field Services v (801) 461-8241 f (801) 461-8222 AT&T Mail: attmail!alexis!carlton Internet: cdoe@sunset.utah.edu OR att!attmail!alexis!carlton@uunet.UU.NET