Oninit cdi / Archive
Talk to an expert →

onbar ism assert faliure

Posted in 2017

Summary

Juan's onbar backups on Informix 11.70.FC8 (Linux) crashed immediately with "ASSERT: file bar_unix.c line 1311" and a core file, both to an NFS-mounted ISM device and to local disk, with -b, -l and -l -c alike. Enabling BAR_DEBUG showed the crash happening inside BSAInit with signal 8 (SIGFPE, divide by zero). Andreas Legner suggested that a filesystem on the box had a block size larger than 1MB, which old ISM can't handle. Juan changed the block size and the backup then worked.

Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.

Topics: Backup & Restore

Juan Francisco González Navarro — — source: IIUG Forums & Mailing Lists

Hello: When I lauch onbar i receive this error in onbar log ASSERT: file bar_unix.c line 1311 - contact product support. What this error means? I'm trying to do backup in a nfs share folder which is already create, mounted and labelded on ism. Thank you. --001a113f328af77fad054bee143f

↪ replying to Juan Francisco González Navarro
Andreas Legner — — source: IIUG Forums & Mailing Lists

Hi, as usual, it would be useful to get some more context: version, platform, = command & output, some log file snippet, ... The assertion would indicate onbar received some sort of signal from the=20 kernel it can't handle. For ruling out nfs as a source of the problem, can you retry the same=20 without nfs involved, i.e. with ISM devices on local drives? Andreas From: "Juan Francisco Gonz=E1lez Navarro" <jfrancisco.navarro@gmail.com> To: ids@iiug.org Date: 30.03.2017 10:00 Subject: onbar ism assert faliure [38819] Sent by: ids-bounces@iiug.org Hello:=20 When I lauch onbar i receive this error in onbar log ASSERT: file=20 bar=5Funix.c line 1311 - contact product support. What this error means?=20 I'm trying to do backup in a nfs share folder which is already create,=20 mounted and labelded on ism.=20 Thank you.=20 --001a113f328af77fad054bee143f=20 ***************************************************************************= ****=20 Forum Note: Use "Reply" to post a response in the discussion forum.=20

↪ replying to Andreas Legner
Juan Francisco González Navarro — — source: IIUG Forums & Mailing Lists

Hi: Also the same issue on local drivers. informix version 11.7 Operatinf System: Linux amd64 Kernel: 3.16.39 onbar_act.log shows this: 2017-03-30 12:02:25 31562 31560 /opt/IBM/informix/bin/onbar_d -b -l -c 2017-03-30 12:02:25* 31562 31560 ASSERT: file bar_unix.c line 1311 - contact product support 2017-03-30 12:02:25* 31562 31560 See also: /opt/IBM/informix/tmp/core onconfig ISM: ISM_DATA_POOL ISMDiskData ISM_LOG_POOL ISMDiskLogs BAR_ACT_LOG $INFORMIXDIR/tmp/bar_act.log BAR_DEBUG_LOG $INFORMIXDIR/tmp/bar_dbug.log BAR_DEBUG 0 BAR_MAX_BACKUP 0 BAR_RETRY 1 BAR_NB_XPORT_COUNT 20 BAR_XFER_BUF_SIZE 31 RESTARTABLE_RESTORE ON BAR_PROGRESS_FREQ 0 BAR_BSALIB_PATH BACKUP_FILTER RESTORE_FILTER BAR_PERFORMANCE 0 Environment variables: INFORMIXDIR=/opt/IBM/informix INFORMIXSERVER=unije10_tcp INFORMIXSQLHOSTS=$INFORMIXDIR/etc/sqlhosts.unije10 ONCONFIG=onconfig.unije10 LD_LIBRARY_PATH=$INFORMIXDIR/lib:$LD_LIBRARY_PATHTERM=xterm TERMCAP=$INFORMIXDIR/etc/termcap IFX_ONTAPE_FILE_PREFIX=$INFORMIXSERVER INFORMIXSTACKSIZE=128 export INFORMIXDIR INFORMIXSERVER INFORMIXSQLHOSTS ONCONFIG LD_LIBRARY_PATHTERM TERMCAP IFX_ONTAPE_FILE_PREFIX INFORMIXSTACKSIZE PATH=$PATH:$INFORMIXDIR/bin export PATH export PATH=$PATH:$INFORMIXDIR/binexport BAR_BSALIB_PATH=$INFORMIXDIR/lib/libbsa.so Any help will be appreciate. Thank you. 2017-03-30 11:19 GMT+02:00 Andreas Legner <andreas.legner@de.ibm.com>: > Hi, > > as usual, it would be useful to get some more context: version, platform, = > > command & output, some log file snippet, ... > > The assertion would indicate onbar received some sort of signal from the=20 > kernel it can't handle. > > For ruling out nfs as a source of the problem, can you retry the same=20 > without nfs involved, i.e. with ISM devices on local drives? > > Andreas > > From: "Juan Francisco Gonz=E1lez Navarro" <jfrancisco.navarro@gmail.com> > To: ids@iiug.org > Date: 30.03.2017 10:00 > Subject: onbar ism assert faliure [38819] > Sent by: ids-bounces@iiug.org > > Hello:=20 > > When I lauch onbar i receive this error in onbar log ASSERT: file=20 > bar=5Funix.c line 1311 - contact product support. What this error means?=20 > > I'm trying to do backup in a nfs share folder which is already create,=20 > mounted and labelded on ism.=20 > > Thank you.=20 > > --001a113f328af77fad054bee143f=20 > > ************************************************************ > ***************= > ****=20 > > Forum Note: Use "Reply" to post a response in the discussion forum.=20 > > > ************************************************************ > ******************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --001a114220acfddb7f054befe374

↪ replying to Juan Francisco González Navarro
Andreas Legner — — source: IIUG Forums & Mailing Lists

Hi Juan, now, before you'd start backing up logical logs, you'd first take at least = a level 0 backup: onbar -b Has this been ran already, has it worked? Also could you try onbar -l without the -c option first? In other=20 words, is it possibly the -c option that's having the problem? Is -b -l -c an expected usage at all ? Shouldn't it be -l -c alone? And finally: which exact 11.7 are u on? Andreas

↪ replying to Andreas Legner
david@smooth1.co.uk — — source: IIUG Forums & Mailing Lists

Also set BAR_DEBUG_LOG in the onconfig file and set BAR_DEBUG to 5 to try again. Regards, David. > On 30 March 2017 at 12:02 Andreas Legner <andreas.legner@de.ibm.com> wrote: > > > Hi Juan, > > now, before you'd start backing up logical logs, you'd first take at least = > > a level 0 backup: onbar -b > Has this been ran already, has it worked? > Also could you try onbar -l without the -c option first? In other=20 > words, is it possibly the -c option that's having the problem? > > Is -b -l -c an expected usage at all ? Shouldn't it be -l -c alone? > > And finally: which exact 11.7 are u on? > > Andreas > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >

↪ replying to Andreas Legner
Juan Francisco González Navarro — — source: IIUG Forums & Mailing Lists

Hi Andreas: doing L0 doesn't work and has the same behavior as you can see: 2017-03-30 15:58:13 1034 1031 /opt/IBM/informix/bin/onbar_d -b 2017-03-30 15:58:13* 1034 1031 ASSERT: file bar_unix.c line 1311 - contact product support 2017-03-30 15:58:13* 1034 1031 See also: /opt/IBM/informix/tmp/core trying onbar -l with and without -c has the same behavior. Using -c option is just for testing purposes in order to test onbar and ism without overload our database. actually , we are using ontape. Our Informix Version is IBM Informix Dynamic Server Version 11.70.FC8 Juan 2017-03-30 13:02 GMT+02:00 Andreas Legner <andreas.legner@de.ibm.com>: > Hi Juan, > > now, before you'd start backing up logical logs, you'd first take at least > = > > a level 0 backup: onbar -b > Has this been ran already, has it worked? > Also could you try onbar -l without the -c option first? In other=20 > words, is it possibly the -c option that's having the problem? > > Is -b -l -c an expected usage at all ? Shouldn't it be -l -c alone? > > And finally: which exact 11.7 are u on? > > Andreas > > > ************************************************************ > ******************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --94eb2c0312d8b08e85054bf33207

↪ replying to david@smooth1.co.uk
Juan Francisco González Navarro — — source: IIUG Forums & Mailing Lists

Hi David, enable Debug onconfig and testing onbar -b generate this bar_dbg.log: Seems to be right except the las two lines. 2017-03-30 15:58:13 1034 1031 bar_get_hostname: enter 2017-03-30 15:58:13 1034 1031 bar_get_hostname: input new_svr unije10_tcp 2017-03-30 15:58:13 1034 1031 bar_get_hostname: output hostname unije10 2017-03-30 15:58:13 1034 1031 bar_get_hostname: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 bar_get_fname: enter 2017-03-30 15:58:13 1034 1031 bar_get_fname: output fname: /opt/IBM/informix/etc/ixbar.0 2017-03-30 15:58:13 1034 1031 bar_get_fname: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 setting progress_freq to 0 2017-03-30 15:58:13 1034 1031 setting alarm_freq to 240 2017-03-30 15:58:13 1034 1031 setting bar_timeout to 600 2017-03-30 15:58:13 1034 1031 read_config:server unije10_tcp:0 max_backup 0 retry 1 actfd 3 2017-03-30 15:58:13 1034 1031 debugfd 4 debug 9 bootfd -1 log_blks 10000 2017-03-30 15:58:13 1034 1031 buf size 63488 buf count 20 ltapedev /mnt/nfs/lbackup 2017-03-30 15:58:13 1034 1031 backup filter , restore filter 2017-03-30 15:58:13 1034 1031 read_config: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 bar_srv_status: enter 2017-03-30 15:58:13 1034 1031 bar_srv_status: return 5 (0x05) 2017-03-30 15:58:13 1034 1031 bar_main: server status 5 2017-03-30 15:58:13 1034 1031 do_args: enter 2017-03-30 15:58:13 1034 1031 do_args: input status 5 argc 2 argv 0x7ffd3e6de7d0 2017-03-30 15:58:13 1034 1031 do_args: got command, -b 2017-03-30 15:58:13 1034 1031 do_args: workflags 3 (0x3) 2017-03-30 15:58:13 1034 1031 do_args: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 bar_siginit: enter 2017-03-30 15:58:13 1034 1031 bar_siginit: return 2017-03-30 15:58:13 1034 1031 bar_alarm: enter 2017-03-30 15:58:13 1034 1031 bar_alarm: input 240 seconds 2017-03-30 15:58:13 1034 1031 bar_alarm: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 bar_is_drsec: enter 2017-03-30 15:58:13 1034 1031 bar_is_drsec: Server type '1' 2017-03-30 15:58:13 1034 1031 bar_is_drsec: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 bar_exec: enter 2017-03-30 15:58:13 1034 1031 BSAQueryApi: enter 2017-03-30 15:58:13 1034 1031 bar_loadXBSA: enter 2017-03-30 15:58:13 1034 1031 bar_loadXBSA: on entry shl_lib_open = 0 2017-03-30 15:58:13 1034 1031 bar_loadXBSA: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: enter 2017-03-30 15:58:13 1034 1031 bar_alarm: enter 2017-03-30 15:58:13 1034 1031 bar_alarm: input 240 seconds 2017-03-30 15:58:13 1034 1031 bar_alarm: return 240 (0xf0) 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: return 2017-03-30 15:58:13 1034 1031 barQueryApi: BSA version 1.0.1 2017-03-30 15:58:13 1034 1031 BSAGetLastError: enter 2017-03-30 15:58:13 1034 1031 BSAGetLastError: return 132 (0x84) 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: enter 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: return 3 (0x03) 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider, returned error 2017-03-30 15:58:13 1034 1031 barQueryApi: reading line from sm_versions: 1|1.0.1|ism|ISM.2.20.UC1.114| 2017-03-30 15:58:13 1034 1031 barQueryApi: found line matching XBSA version number 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bar_sm to ism 2017-03-30 15:58:13 1034 1031 macro: set ccb->bar_sm_code to 1 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bsa_ses_style to 2 2017-03-30 15:58:13 1034 1031 barBsaInit: enter 2017-03-30 15:58:13 1034 1031 initObjDesc: enter 2017-03-30 15:58:13 1034 1031 initObjDesc: input: obj_desc is NULL 2017-03-30 15:58:13 1034 1031 initObjOwner: enter 2017-03-30 15:58:13 1034 1031 initObjOwner:bsa owner INFORMIX app owner informix 2017-03-30 15:58:13 1034 1031 initObjOwner: return 2017-03-30 15:58:13 1034 1031 buildObjName: enter 2017-03-30 15:58:13 1034 1031 buildObjName: obj_desc is NULL 2017-03-30 15:58:13 1034 1031 buildObjName: set server_name to unije10_tcp 2017-03-30 15:58:13 1034 1031 buildObjName: output objectSpaceName /unije10_tcp, pathName 2017-03-30 15:58:13 1034 1031 buildObjName: return 0 (0x00) 2017-03-30 15:58:13 1034 1031 initObjDesc: output: object owner name createTime 2017-03-30 15:58:13 1034 1031 initObjDesc: output: INFORMIX informix /unije10_tcp 0 0 0 0 0 0 2017-03-30 15:58:13 1034 1031 initObjDesc: output: copytype copyid restoreOrder size resource type status desc objectInfo 2017-03-30 15:58:13 1034 1031 initObjDesc: output: 3 0 0 0 0 0 0 4 2 2017-03-30 15:58:13 1034 1031 initObjDesc: return 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[0] ISM_SERVER=unije10 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[1] ISM_DATA_VOLUME_POOL=ISMDiskData 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[2] ISM_LOG_VOLUME_POOL=ISMDiskLogs 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[3] ISM_SAVESET_NAME=INFORMIX: 2017-03-30 15:58:13 1034 1031 BSAInit: enter 2017-03-30 15:58:13 1034 1031 BSAInit: input tokenPtr owner INFORMIX informix 2017-03-30 15:58:13 1034 1031 bar_alarm: enter 2017-03-30 15:58:13 1034 1031 bar_alarm: input 240 seconds 2017-03-30 15:58:13 1034 1031 bar_alarm: return 240 (0xf0) 2017-03-30 15:58:13* 1034 1031 bar_sighdlr: enter 2017-03-30 15:58:13* 1034 1031 bar_sighdlr: input signo: 8 2017-03-30 15:58:13* 1034 1031 get_pid: enter 2017-03-30 15:58:13* 1034 1031 getpid: return 1034 (0x40a) 2017-03-30 15:58:13* 1034 1031 barEndTxn: enter 2017-03-30 15:58:13* 1034 1031 barEndTxn: return 0 (0x00) 2017-03-30 15:58:13* 1034 1031 barTerminate: enter 2017-03-30 15:58:13* 1034 1031 barTerminate: return 0 (0x00) 2017-03-30 15:58:13* 1034 1031 bar_debug: enter 2017-03-30 15:58:13* 1034 1031 bar_debug: Called from file bar_unix.c line 1311 REgards.. 2017-03-30 15:26 GMT+02:00 david@smooth1.co.uk <david@smooth1.co.uk>: > Also set BAR_DEBUG_LOG in the onconfig file and set BAR_DEBUG to 5 to try > again. > > Regards, > David. > > > On 30 March 2017 at 12:02 Andreas Legner <andreas.legner@de.ibm.com> > wrote: > > > > > > Hi Juan, > > > > now, before you'd start backing up logical logs, you'd first take at > least = > > > > a level 0 backup: onbar -b > > Has this been ran already, has it worked? > > Also could you try onbar -l without the -c option first? In other=20 > > words, is it possibly the -c option that's having the problem? > > > > Is -b -l -c an expected usage at all ? Shouldn't it be -l -c alone? > > > > And finally: which exact 11.7 are u on? > > > > Andreas > > > > > > > ************************************************************ > ******************* > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > ************************************************************ > ******************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --001a113f328afb63ba054bf339a5

↪ replying to Juan Francisco González Navarro
Andreas Legner — — source: IIUG Forums & Mailing Lists

Can you find out whether one of the file systems on this box (not only the = one where ISM would have its devices) is defined with a block size >=20 1024000 (1MB) ? I'm afraid good old ISM isn't prepared for this and would run on a=20 division-by-zero error. From: "Juan Francisco Gonz=E1lez Navarro" <jfrancisco.navarro@gmail.com> To: ids@iiug.org Date: 30.03.2017 16:10 Subject: Re: onbar ism assert faliure [38826] Sent by: ids-bounces@iiug.org Hi David, enable Debug onconfig and testing onbar -b generate this=20 bar=5Fdbg.log: Seems to be right except the las two lines.=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: input new=5Fsvr unije10= =5Ftcp=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: output hostname unije10= =20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: output fname:=20 /opt/IBM/informix/etc/ixbar.0=20 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 setting progress=5Ffreq to 0=20 2017-03-30 15:58:13 1034 1031 setting alarm=5Ffreq to 240=20 2017-03-30 15:58:13 1034 1031 setting bar=5Ftimeout to 600=20 2017-03-30 15:58:13 1034 1031 read=5Fconfig:server unije10=5Ftcp:0=20 max=5Fbackup 0 retry 1 actfd 3=20 2017-03-30 15:58:13 1034 1031 debugfd 4 debug 9=20 bootfd -1 log=5Fblks 10000=20 2017-03-30 15:58:13 1034 1031 buf size 63488 buf count 20=20 ltapedev /mnt/nfs/lbackup=20 2017-03-30 15:58:13 1034 1031 backup filter , restore filter=20 2017-03-30 15:58:13 1034 1031 read=5Fconfig: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 bar=5Fsrv=5Fstatus: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Fsrv=5Fstatus: return 5 (0x05)=20 2017-03-30 15:58:13 1034 1031 bar=5Fmain: server status 5=20 2017-03-30 15:58:13 1034 1031 do=5Fargs: enter=20 2017-03-30 15:58:13 1034 1031 do=5Fargs: input status 5 argc 2 argv=20 0x7ffd3e6de7d0=20 2017-03-30 15:58:13 1034 1031 do=5Fargs: got command, -b=20 2017-03-30 15:58:13 1034 1031 do=5Fargs: workflags 3 (0x3)=20 2017-03-30 15:58:13 1034 1031 do=5Fargs: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 bar=5Fsiginit: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Fsiginit: return=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: Server type '1'=20 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 bar=5Fexec: enter=20 2017-03-30 15:58:13 1034 1031 BSAQueryApi: enter=20 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: enter=20 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: on entry shl=5Flib=5Fopen =3D= 0=20 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 240 (0xf0)=20 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: return=20 2017-03-30 15:58:13 1034 1031 barQueryApi: BSA version 1.0.1=20 2017-03-30 15:58:13 1034 1031 BSAGetLastError: enter=20 2017-03-30 15:58:13 1034 1031 BSAGetLastError: return 132 (0x84)=20 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: enter=20 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: return 3 (0x03)=20 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider, returned error=20 2017-03-30 15:58:13 1034 1031 barQueryApi: reading line from sm=5Fversions:= =20 1|1.0.1|ism|ISM.2.20.UC1.114|=20 2017-03-30 15:58:13 1034 1031 barQueryApi: found line matching XBSA=20 version number=20 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bar=5Fsm to ism=20 2017-03-30 15:58:13 1034 1031 macro: set ccb->bar=5Fsm=5Fcode to 1=20 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bsa=5Fses=5Fstyle to 2 = 2017-03-30 15:58:13 1034 1031 barBsaInit: enter=20 2017-03-30 15:58:13 1034 1031 initObjDesc: enter=20 2017-03-30 15:58:13 1034 1031 initObjDesc: input: obj=5Fdesc is NULL=20 2017-03-30 15:58:13 1034 1031 initObjOwner: enter=20 2017-03-30 15:58:13 1034 1031 initObjOwner:bsa owner INFORMIX app owner=20 informix=20 2017-03-30 15:58:13 1034 1031 initObjOwner: return=20 2017-03-30 15:58:13 1034 1031 buildObjName: enter=20 2017-03-30 15:58:13 1034 1031 buildObjName: obj=5Fdesc is NULL=20 2017-03-30 15:58:13 1034 1031 buildObjName: set server=5Fname to unije10=5F= tcp=20 2017-03-30 15:58:13 1034 1031 buildObjName: output objectSpaceName=20 /unije10=5Ftcp, pathName=20 2017-03-30 15:58:13 1034 1031 buildObjName: return 0 (0x00)=20 2017-03-30 15:58:13 1034 1031 initObjDesc: output: object owner=20 name createTime=20 2017-03-30 15:58:13 1034 1031 initObjDesc: output: INFORMIX informix=20 /unije10=5Ftcp 0 0 0 0 0 0=20 2017-03-30 15:58:13 1034 1031 initObjDesc: output: copytype copyid=20 restoreOrder size resource type status desc objectInfo=20 2017-03-30 15:58:13 1034 1031 initObjDesc: output: 3 0=20 0 0 0 0 0 4 2=20 2017-03-30 15:58:13 1034 1031 initObjDesc: return=20 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[0] ISM=5FSERVER=3Dunije10 = 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[1]=20 ISM=5FDATA=5FVOLUME=5FPOOL=3DISMDiskData=20 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[2]=20 ISM=5FLOG=5FVOLUME=5FPOOL=3DISMDiskLogs=20 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[3]=20 ISM=5FSAVESET=5FNAME=3DINFORMIX:=20 2017-03-30 15:58:13 1034 1031 BSAInit: enter=20 2017-03-30 15:58:13 1034 1031 BSAInit: input tokenPtr owner INFORMIX=20 informix=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 240 (0xf0)=20 2017-03-30 15:58:13* 1034 1031 bar=5Fsighdlr: enter=20 2017-03-30 15:58:13* 1034 1031 bar=5Fsighdlr: input signo: 8=20 2017-03-30 15:58:13* 1034 1031 get=5Fpid: enter=20 2017-03-30 15:58:13* 1034 1031 getpid: return 1034 (0x40a)=20 2017-03-30 15:58:13* 1034 1031 barEndTxn: enter=20 2017-03-30 15:58:13* 1034 1031 barEndTxn: return 0 (0x00)=20 2017-03-30 15:58:13* 1034 1031 barTerminate: enter=20 2017-03-30 15:58:13* 1034 1031 barTerminate: return 0 (0x00)=20 2017-03-30 15:58:13* 1034 1031 bar=5Fdebug: enter=20 2017-03-30 15:58:13* 1034 1031 bar=5Fdebug: Called from file bar=5Funix.c=20 line 1311=20 REgards..=20 2017-03-30 15:26 GMT+02:00 david@smooth1.co.uk <david@smooth1.co.uk>:=20 > Also set BAR=5FDEBUG=5FLOG in the onconfig file and set BAR=5FDEBUG to 5 = to=20 try=20 > again.=20 >=20 > Regards,=20 > David.=20 >=20 > > On 30 March 2017 at 12:02 Andreas Legner <andreas.legner@de.ibm.com>=20 > wrote:=20 > >=20 > >=20 > > Hi Juan,=20 > >=20 > > now, before you'd start backing up logical logs, you'd first take at=20 > least =3D=20 > >=20 > > a level 0 backup: onbar -b=20 > > Has this been ran already, has it worked?=20 > > Also could you tr

↪ replying to Andreas Legner
Juan Francisco González Navarro — — source: IIUG Forums & Mailing Lists

Hello: Thanko you. It's works!!! Changing blosk size. Regards. 2017-03-31 12:45 GMT+02:00 Andreas Legner <andreas.legner@de.ibm.com>: > Can you find out whether one of the file systems on this box (not only the > = > > one where ISM would have its devices) is defined with a block size >=20 > 1024000 (1MB) ? > I'm afraid good old ISM isn't prepared for this and would run on a=20 > division-by-zero error. > > From: "Juan Francisco Gonz=E1lez Navarro" <jfrancisco.navarro@gmail.com> > To: ids@iiug.org > Date: 30.03.2017 16:10 > Subject: Re: onbar ism assert faliure [38826] > Sent by: ids-bounces@iiug.org > > Hi David, enable Debug onconfig and testing onbar -b generate this=20 > bar=5Fdbg.log: Seems to be right except the las two lines.=20 > > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: input new=5Fsvr > unije10= > =5Ftcp=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: output hostname > unije10= > =20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Fhostname: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: output fname:=20 > /opt/IBM/informix/etc/ixbar.0=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fget=5Ffname: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 setting progress=5Ffreq to 0=20 > 2017-03-30 15:58:13 1034 1031 setting alarm=5Ffreq to 240=20 > 2017-03-30 15:58:13 1034 1031 setting bar=5Ftimeout to 600=20 > 2017-03-30 15:58:13 1034 1031 read=5Fconfig:server unije10=5Ftcp:0=20 > max=5Fbackup 0 retry 1 actfd 3=20 > 2017-03-30 15:58:13 1034 1031 debugfd 4 debug 9=20 > bootfd -1 log=5Fblks 10000=20 > 2017-03-30 15:58:13 1034 1031 buf size 63488 buf count 20=20 > ltapedev /mnt/nfs/lbackup=20 > 2017-03-30 15:58:13 1034 1031 backup filter , restore filter=20 > 2017-03-30 15:58:13 1034 1031 read=5Fconfig: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fsrv=5Fstatus: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fsrv=5Fstatus: return 5 (0x05)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fmain: server status 5=20 > 2017-03-30 15:58:13 1034 1031 do=5Fargs: enter=20 > 2017-03-30 15:58:13 1034 1031 do=5Fargs: input status 5 argc 2 argv=20 > 0x7ffd3e6de7d0=20 > 2017-03-30 15:58:13 1034 1031 do=5Fargs: got command, -b=20 > 2017-03-30 15:58:13 1034 1031 do=5Fargs: workflags 3 (0x3)=20 > 2017-03-30 15:58:13 1034 1031 do=5Fargs: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fsiginit: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fsiginit: return=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: Server type '1'=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fis=5Fdrsec: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 bar=5Fexec: enter=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryApi: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: on entry shl=5Flib=5Fopen > =3D= > 0=20 > 2017-03-30 15:58:13 1034 1031 bar=5FloadXBSA: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 240 (0xf0)=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryApiVersion: return=20 > 2017-03-30 15:58:13 1034 1031 barQueryApi: BSA version 1.0.1=20 > 2017-03-30 15:58:13 1034 1031 BSAGetLastError: enter=20 > 2017-03-30 15:58:13 1034 1031 BSAGetLastError: return 132 (0x84)=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: enter=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider: return 3 (0x03)=20 > 2017-03-30 15:58:13 1034 1031 BSAQueryServiceProvider, returned error=20 > 2017-03-30 15:58:13 1034 1031 barQueryApi: reading line from > sm=5Fversions:= > =20 > 1|1.0.1|ism|ISM.2.20.UC1.114|=20 > 2017-03-30 15:58:13 1034 1031 barQueryApi: found line matching XBSA=20 > version number=20 > 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bar=5Fsm to ism=20 > 2017-03-30 15:58:13 1034 1031 macro: set ccb->bar=5Fsm=5Fcode to 1=20 > 2017-03-30 15:58:13 1034 1031 barQueryApi: set ccb->bsa=5Fses=5Fstyle to 2 > = > > 2017-03-30 15:58:13 1034 1031 barBsaInit: enter=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: enter=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: input: obj=5Fdesc is NULL=20 > 2017-03-30 15:58:13 1034 1031 initObjOwner: enter=20 > 2017-03-30 15:58:13 1034 1031 initObjOwner:bsa owner INFORMIX app owner=20 > informix=20 > 2017-03-30 15:58:13 1034 1031 initObjOwner: return=20 > 2017-03-30 15:58:13 1034 1031 buildObjName: enter=20 > 2017-03-30 15:58:13 1034 1031 buildObjName: obj=5Fdesc is NULL=20 > 2017-03-30 15:58:13 1034 1031 buildObjName: set server=5Fname to > unije10=5F= > tcp=20 > > 2017-03-30 15:58:13 1034 1031 buildObjName: output objectSpaceName=20 > /unije10=5Ftcp, pathName=20 > 2017-03-30 15:58:13 1034 1031 buildObjName: return 0 (0x00)=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: output: object owner=20 > name createTime=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: output: INFORMIX informix=20 > /unije10=5Ftcp 0 0 0 0 0 0=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: output: copytype copyid=20 > restoreOrder size resource type status desc objectInfo=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: output: 3 0=20 > 0 0 0 0 0 4 2=20 > 2017-03-30 15:58:13 1034 1031 initObjDesc: return=20 > 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[0] ISM=5FSERVER=3Dunije10 > = > > 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[1]=20 > ISM=5FDATA=5FVOLUME=5FPOOL=3DISMDiskData=20 > 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[2]=20 > ISM=5FLOG=5FVOLUME=5FPOOL=3DISMDiskLogs=20 > 2017-03-30 15:58:13 1034 1031 barBsaInit: envtab[3]=20 > ISM=5FSAVESET=5FNAME=3DINFORMIX:=20 > 2017-03-30 15:58:13 1034 1031 BSAInit: enter=20 > 2017-03-30 15:58:13 1034 1031 BSAInit: input tokenPtr owner INFORMIX=20 > informix=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: enter=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: input 240 seconds=20 > 2017-03-30 15:58:13 1034 1031 bar=5Falarm: return 240 (0xf0)=20 > 2017-03-30 15:58:13* 1034 1031 bar=5Fsighdlr: enter=20 > 2017-03-30 15:58:13* 1034 1031 bar=5Fsighdlr: input signo: 8=20 > 2017-03-30 15:58:13* 1034 1031 get=5Fpid: enter=20 > 2017-03-30 15:58:13* 1034 1031 getpid: return 1034 (0x40a)=20 > 2017-03-30 15:58:13* 1034 1031 barEndTxn: enter=20 > 2017-03-30 15:58:13* 1034 1031 barEndTxn: return 0 (0x00)=20 > 2017-03-30 15:58:13* 1034 1031 barTerminate: enter=20 > 2017-03-30 15:58:13* 1034 1031 barTerminate: return 0 (0x00)=20 > 2017-03-30 15:58:13* 1034 1031 bar=5Fdebug: enter=20 > 2017-03-30 15:58:13* 1034 1031 bar=5Fdebug: Called from file > bar=5Funix.c=20 > line 1311=20 > > REgards..=20 > > 2017-03-30 15:26 GMT+02:00 david@smooth1.co.uk <david@smooth1.co.uk>:=20 > > > Also set BAR=5FDEBUG=5FLOG in the onconfig file and set B

Glossary