On Mon, 19 Apr 2004 09:30:39 -0400, DNix wrote:
Paul's got it. To build RAID10 (versus RAID01) first you create N mirrored
pairs then you stripe the mirror devices. This gives you greater safety and
improved recovery time over RAID01. Performance is identical with either
RAID10 or RAID01.
Art S. Kagel
> "Art S. Kagel" <kagel@bloomberg.net> wrote in message
> news:<pan.2004.04.02.08.20.02.153746.1445@bloomberg.net>...
>> On Thu, 01 Apr 2004 03:57:48 -0500, Andy Kent wrote:
>>
>> I mostly agree with Andy, put everything on the single RAID10 array. If
>> the server were to be heavily loaded with update activity then perhaps you
>> could make a case for reserving one pair of drives for a mirror (RAID1) to
>> contain just the ROOTDB and LOGSDB. But if the load will not be high, I
>> would not bother.
>>
>> Art S. Kagel
>>
>> PS: Remember to stripe the 5 mirrored pairs not the other way around.
>
> Hi Art,
> You lost me here, what exactly did you mean by "PS: Remember to stripe the 5
> mirrored pairs not the other way around."?
>
>
>
>> > I'm about to configure a brand new, fast RAID 1+0-based system which will
>> > use logged sbspaces. Conventional (JABOD-based) wisdom tells me to put
>> > the logs on a separate device to the busy storage spaces. But, on a
>> > 5-disk array, does this idea justify holding back one disk for the logs
>> > and just configuring RAID 1+0 on the other four? Is it worth it or is the
>> > idea simply too messy? The system will be quite lightly loaded but the
>> > sbspaces could make up the bulk of the activity and could actually be
>> > written more than read.
>> >
>> > If we went for just sticking the whole lot in a single array, is there
>> > any point in putting teh logs outside rootdbs?
>> >
>> > Many thanks,
>> >
>> >
>> > Andy Kent
>> > Bristol, UK
>> >