NETTYPE
Rob Phillips on IDS 7.3 got listener error -25573 (oserr 72) and IBM suggested changing NETTYPE soctcp from 1,200 to 4,1000. Scott MacKenzie advised trying 1,300 or 2,200. Mark Scranton noted poll threads beyond the CPU VPs run on NET VPs, and that 1000 users per poll thread is high. Michael Mueller asked for the OS to decode oserr 72. Unresolved.
Auto-generated by Claude from the posts below — may be imperfect; read the full thread.
I get the following error occasionally on my IDS7.3 box:
10:29:28 listener-thread: err = -25573: oserr = 72: errstr = : Network
driver cannot accept a connection on the port.
System error = 72.
I talked with IBM and they had me run onstat -u which yielded ~1000 maximum
concurrent connections.
He suggested changing the NETTYPE in onconfig.ows from
NETTYPE soctcp,1,200,CPUTO
NETTYPE soctcp,4,1000,CPU
But in reading "INFORMIX-OnLine Dynamic Server Handbook" by Carlton Doe it
said that the number of poll threads (the first number) can be set higher
than the number of CPU VPS that I have. Which I believe is 2. (I got this
from onconfig.ows setting NUMCPUVPS 2 and from onstat -g glo returned that
the cpu class had 2 vps)
Should the setting for NETTYPE be changed to
NETTYPW soctcp,2,1000,CPU
Instead?
Rob,
Try
NETTYPE soctcp,1,300,CPUor
NETTYPE soctcp,2,200,CPUand see if it changes things. I would hesitate to plug in the 1000 value!
Phillips, Rob wrote:
> I get the following error occasionally on my IDS7.3 box:
> 10:29:28 listener-thread: err = -25573: oserr = 72: errstr = : Network
> driver cannot accept a connection on the port.
> System error = 72.
>
> I talked with IBM and they had me run onstat -u which yielded ~1000 maximum
> concurrent connections.
>
> He suggested changing the NETTYPE in onconfig.ows from
> NETTYPE soctcp,1,200,CPU> TO
> NETTYPE soctcp,4,1000,CPU>
> But in reading "INFORMIX-OnLine Dynamic Server Handbook" by Carlton Doe it
> said that the number of poll threads (the first number) can be set higher
> than the number of CPU VPS that I have. Which I believe is 2. (I got this
> from onconfig.ows setting NUMCPUVPS 2 and from onstat -g glo returned that
> the cpu class had 2 vps)
>
> Should the setting for NETTYPE be changed to
> NETTYPW soctcp,2,1000,CPU
> Instead?
>
--
( ______
)) .-- Scott MacKenzie; Dine' College ISD --. >===<--.
C|~~| (>--- Phone/Voice Mail: 928-724-6639 ---<) | ; o |-'
| | \\\\--- Senior DBA/CARS Coordinator/Etc. --/ | _ |
`--' `-- E: scottm at dinecollege dot edu -' `-----'
What was odd to me was that it is set to 1,100 and 2
CPUVPS. Which would
allow for 200 concurrent connections. For the past two years we have been
around ~1000 maximum concurrent connections. How can the server report that
I have had a maximum of ~1000 concurrent connections when it is specifically
set not to allow more than 200 concurrent connections?
-----Original Message-----
From: Mark Scranton [mailto:mscranto@us.ibm.com]
Sent: Tuesday, April 29, 2003 2:54 PM
To: Phillips, Rob
Subject: Re: NETTYPE [1033]
I see two problems here...
You CAN set the number of poll threads higher than the NUMCPUVPS, but then
they will be started on NETvps instead. You should have rec'd a msg in the
msg log about this. One poll thread per CPUVP is the rule, or was for a
long time.
Secondly, the NETTYPE soctcp,4,1000,CPU means 1000 users per poll thread
(4000 users), and run each poll thread on a CPUVP. This is traditionally a
very high number of users to support per poll thread, but maybe someone
else can comment about attempting this in very large environments.
Carlton?
HTH -
Mark.
Mark Scranton
Principal Consultant/Teacher
IBM Denver
IBM Software Group - Data Management
Office: 303-773-5067
Cell: 303-929-0914
email: mscranto@us.ibm.com
"Phillips, Rob"
<RPhillips@ce-a.c To: ids@iiug.org
om> cc:
Sent by: Subject: NETTYPE [1033]
forum.subscriber@
iiug.org
04/29/2003 11:45
AM
I get the following error occasionally on my IDS7.3 box:
10:29:28 listener-thread: err = -25573: oserr = 72: errstr = : Network
driver cannot accept a connection on the port.
System error = 72.
I talked with IBM and they had me run onstat -u which yielded ~1000 maximum
concurrent connections.
He suggested changing the NETTYPE in onconfig.ows from
NETTYPE soctcp,1,200,CPUTO
NETTYPE soctcp,4,1000,CPU
But in reading "INFORMIX-OnLine Dynamic Server Handbook" by Carlton Doe it
said that the number of poll threads (the first number) can be set higher
than the number of CPU VPS that I have. Which I believe is 2. (I got this
from onconfig.ows setting NUMCPUVPS 2 and from onstat -g glo returned that
the cpu class had 2 vps)
Should the setting for NETTYPE be changed to
NETTYPW soctcp,2,1000,CPU
Instead?
Rob,
If you could tell me what OS you are on we could figure out what oserr =
72 means. On UNIX systems these error codes are usually in
/usr/include/errno.h or /usr/include/sys/errno.h.
Michael
Phillips, Rob wrote:
> I get the following error occasionally on my IDS7.3 box:
> 10:29:28 listener-thread: err = -25573: oserr = 72: errstr = : Network
> driver cannot accept a connection on the port.
> System error = 72.
>
> I talked with IBM and they had me run onstat -u which yielded ~1000 maximum
> concurrent connections.
>
> He suggested changing the NETTYPE in onconfig.ows from
> NETTYPE soctcp,1,200,CPU> TO
> NETTYPE soctcp,4,1000,CPU>
> But in reading "INFORMIX-OnLine Dynamic Server Handbook" by Carlton Doe it
> said that the number of poll threads (the first number) can be set higher
> than the number of CPU VPS that I have. Which I believe is 2. (I got this
> from onconfig.ows setting NUMCPUVPS 2 and from onstat -g glo returned that
> the cpu class had 2 vps)
>
> Should the setting for NETTYPE be changed to
> NETTYPW soctcp,2,1000,CPU
> Instead?
>
>
--
=== Michael Mueller ==================
Tel. + 49 8171 63600
Fax. + 49 8171 63615
Web: http://www.mm.kay-mueller.de
http://www.planets.kay-mueller.de
======================================