problem using onspaces to recover chunks on EMC

It seems that I can't use onspaces to recover down chunks ( after disk failure ) after relinking the chunk and moving it to EMC Symmetrix 3700 array using the power devices provided by power path. The disks are under RAID-1 at the array level. After a hard drive failure ( Sun SSA disk ) I did the following steps to move the chunks over to an EMC array 1. brought down any chunks that hadn't already been marked down onspaces -s pos_trans -p /u/inflinks/acct/pos_trans_29 -o 0 -D 2. removed old links and relinked to new chunk on EMC disk rm /u/inflinks/acct/pos_trans_29 ln -s /dev/rdsk/emcpower217d /u/inflinks/acct/pos_trans_29 3. tried to bring chunk back up using onspaces and it returns that "The chunk specified does not exist." onspaces -s pos_trans -p /u/inflinks/acct/pos_trans_29 -o 0 -O The chunk specified does not exist. 4. Tried using onmonitor to recover chunk and that did work as expected One funny thing is that once a chunk is recovered using onmonitor on the EMC array I can bring it down and back up using the above onspaces commands as expected. Has anyone seen this before and if so is there a work around? I'm hoping there is just something simple that I have overlooked. I have a case open with Informix, but that hasn't turned up anything useful yet. My next step is to open a case with EMC on this, but I haven't done this yet. Engine Version: 7.31.UC5 OS: Solaris 2.6 EMC Array: Model 3700 ( disks using RAID-1 ) Victor Michaud victor.michaud@hastings-ent.com Sent via Deja.com http://www.deja.com/ Before you buy.