Re: Ontape won't change logging -Reply
In article <5t1g8i$fa1@cssun.mathcs.emory.edu>, John Coyle
<JFC@yankeecandle.com> writes
>Hi Klaus,
>
>I am running Dynamic Server 7.22UC1 on an HP 9000 HPUX 10.22 and
>have had similar problems when trying to have a single command backup
>and alter logging. The solution I arrived at is as follows: ontape -U mbs
>-s, then manually respond with level 0 at the next prompt. Whenever I've
>tried to incorporate everything in the command line I get a similar failure.
>Splitting the command up this way does work, since it's the way I've
>revived unbuffered logging on my databases after loads.
>
I've also seen this on OWS 7.20.UC2 on a Sun Ultrasparc Solaris 2.5.1.
Same fix, leave out -L 0 and just type the 0 in.
>Hope this helps,
>John
>----------------
>John F. Coyle, DBA
>jfc@yankeecandle.com
>
>>>> Michael Weegen <michael.weegen@uni.essen> 08/15/97 03:49am
>>>>
>Hi
>I am running Informix Dynamic Server 7.23 UC1 on a IBM RS/6000 with
>AIS 4.1.4
>
>I load a database named "mbs" without logging.
>After this, I want to change the logging to unbuffered logging
>with the command:
>ontape -s -L 0 -U mbs>
>but it doesn't work - I get following message:
>Archive failed - Invalid logging change to mbs
>
>Program over.
>
>Who can help me?
>
>Klaus Arlt
>
>--
>
>
>|--------------------------------------------------------------|
>|Universitaet GH Essen | |
>| Dezernat 2.6 | |
>| -Datenverarbeitung- | Tel.: 0201-183-2055 |
>| Klaus Arlt | Fax.: 0201-183-2008 |
>|Universitaetsstr. 2 | E-Mail: klaus.arlt@uni-essen.de |
>|45117 Essen | E-Mail: ydv010@sp2.power.uni-essen.de |
>|--------------------------------------------------------------|
>
--
David Williams