Warning! Physical log size is too small.

Hello guys, Our current NETTYPE settings are as follows : NETTYPE ipcshm,1,64,CPU NETTYPE soctcp,2,128,NET Previously the settings were as follows : NETTYPE ipcshm,1,64,NET NETTYPE soctcp,2,128,CPU After making the change in the settings I was getting following error : Severity : 3 OnLine Initialization failure. WARNING! Physical Log size 40960 is too small. Physical Log overflows may occur during peak activity. Recommended minimum Physical Log size is 20 times maximum concurrent user threads. To avoid this I increased the PHYSFILE from 40960 to 122880 But still, today I got the same error : Severity : 3 OnLine Initialization failure. WARNING! Physical Log size 122880 is too small. Physical Log overflows may occur during peak activity. Recommended minimum Physical Log size is 20 times maximum concurrent user threads. At the same time when I got the error I counted the no. of userthreads with the following command : onstat -u | wc -l and those were more than 3100. I have following queries : Does the above change in the NETTYPE parameters allow more userthreads to start/operate? I expect max 200 concurrent users in my system, but the count of the userthreads is much high. Does this mean that PSORT_NPROCS or PDQPRIORITY feature is used the code/application? Do I still need to increase the PHYSFILE? Other than this error the system is fine, low checkpoint duration 0-5, high cached read/write >98, >95. Thanks in advance for your replies. Vinod Bhansali ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com