Informix on Solaris 11
A DBA migrating IDS 11.70.FC7W2 from Solaris 10 to Solaris 11 found the engine would only boot with RESIDENT set to 0 or 1; with RESIDENT -1 (lock all shared memory resident) it panicked at startup with assertion failures in mtex.c line 490, "Exception Caught. Type: MT_EX_OS, Context: mem", in kaio/tlitcppoll threads. Art Kagel saw nothing diagnostic in the log and suggested a PMR (already opened); David Williams asked for the af files, onconfig, oninit -v output and host memory, suspecting overcommitted memory, and another poster suggested checking kernel settings in the release notes. No resolution is recorded in the thread.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
Hi,
We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris 11.
We are having an issue if we set RESIDENT to -1 we cannot bring up the
engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
ok. Anyone have any ideas on this? historically we have always set
RESIDENT to -1.
--Dave
--089e01176087d8470604ea0c2a2d
Is there any notice in the online log at the time of the crash? If so, can
you post it here?
Art
Art S. Kagel, Principal Consultant
Advanced DataTools (www.advancedatatools.com)
Blog: http://informix-myview.blogspot.com/
Disclaimer: Please keep in mind that my own opinions are my own opinions
and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
other organization with which I am associated either explicitly,
implicitly, or by inference. Neither do those opinions reflect those of
other individuals affiliated with any entity with which I am affiliated nor
those of the entities themselves.
On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com> wrote:
> Hi,
>
> We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris 11.
> We are having an issue if we set RESIDENT to -1 we cannot bring up the
> engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
> ok. Anyone have any ideas on this? historically we have always set
> RESIDENT to -1.>
> --Dave
>
> --089e01176087d8470604ea0c2a2d
>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
--047d7b34327052036804ea0c4bdc
Sure online.log shows a few variety of errors depending on different
settings we tried. Here are a few of the errors from some of the attempts
to bring up the engine:
16:49:41 Maximum server connections 3
16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
0, Plog used 4, Llog used 2
16:49:45 Checkpoint Completed: duration was 0 seconds.
16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e
Interval: 4
16:49:45 Maximum server connections 3
16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
0, Plog used 164, Llog used 306
16:49:45 Adjusting LRU for bufferpool - id 0 size 2k
16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9
16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9
16:49:45 Assert Failed: No Exception Handler
16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2
16:49:45 Who: Thread(523, kaio, 0, 20)
File: mtex.c Line: 490
16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem
16:49:45 Action: Please notify IBM Informix Technical Support.
16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0
16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception Handler.
16:49:50 Fatal error in ADM VP at mt.c:14045
16:49:50 Unexpected virtual processor termination, pid = 15203, exit =
0x100
16:49:50 PANIC: Attempting to bring system down
---------------------------------------------
Next Error From Log
---------------------------------------------
13:25:32 Loading Module <CNULL>
13:25:32 Booting Language <builtin> from module <>
13:25:32 Loading Module <BUILTINNULL>
13:25:39 DR: DRAUTO is 0 (Off)
13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
13:25:39 Fast poll /dev/poll enabled.
13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115
13:25:41 Assert Failed: No Exception Handler
13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2
13:25:41 Who: Session(23, informix@, 0, 0)
Thread(29, tlitcppoll, 0, 51)
File: mtex.c Line: 490
13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem
13:25:41 Action: Please notify IBM Informix Technical Support.
13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0
---------------------------------------------
Next Error From Log
---------------------------------------------
13:57:50 Loading Module <BUILTINNULL>
13:57:57 DR: DRAUTO is 0 (Off)
13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
13:57:57 Fast poll /dev/poll enabled.
13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5
13:57:57 Assert Failed: No Exception Handler
13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2
13:57:57 Who: Session(6, informix@, 0, 0)
Thread(12, tlitcppoll, 0, 34)
File: mtex.c Line: 490
13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem
13:57:57 Action: Please notify IBM Informix Technical Support.
13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0
13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception Handler.
13:58:03 PANIC: Attempting to bring system down
---------------------------------------------
Next Error From Log
---------------------------------------------
14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial
Number AAA#B000000
14:00:43 Value of FULL_DISK_INIT has been changed to 0.
14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b
14:00:44 Assert Failed: No Exception Handler
14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2
14:00:44 Who: Session(2, informix@, 0, 0)
Thread(8, tlitcppoll, 0, 30)
File: mtex.c Line: 490
14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem
14:00:44 Action: Please notify IBM Informix Technical Support.
14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0
14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler.
14:00:48 PANIC: Attempting to bring system down
On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote:
> Is there any notice in the online log at the time of the crash? If so, can
> you post it here?
>
> Art
>
> Art S. Kagel, Principal Consultant
>
> Advanced DataTools (www.advancedatatools.com)
> Blog: http://informix-myview.blogspot.com/
>
> Disclaimer: Please keep in mind that my own opinions are my own opinions
> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> other organization with which I am associated either explicitly,
> implicitly, or by inference. Neither do those opinions reflect those of
> other individuals affiliated with any entity with which I am affiliated nor
> those of the entities themselves.
>
> On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com>
> wrote:
>
> > Hi,
> >
> > We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris 11.
> > We are having an issue if we set RESIDENT to -1 we cannot bring up the
> > engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
> > ok. Anyone have any ideas on this? historically we have always set
> > RESIDENT to -1.> >
> > --Dave
> >
> > --089e01176087d8470604ea0c2a2d
> >
> >
> >
> >
>
>
*******************************************************************************
> > Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
>
> --047d7b34327052036804ea0c4bdc
>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
--001a11c372320dd86304ea0c905c
Hmm, nothing useful though. Time to open a PMR with IBM Support.
Art
Art S. Kagel, Principal Consultant
Advanced DataTools (www.advancedatatools.com)
Blog: http://informix-myview.blogspot.com/
Disclaimer: Please keep in mind that my own opinions are my own opinions
and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
other organization with which I am associated either explicitly,
implicitly, or by inference. Neither do those opinions reflect those of
other individuals affiliated with any entity with which I am affiliated nor
those of the entities themselves.
On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote:
> Sure online.log shows a few variety of errors depending on different
> settings we tried. Here are a few of the errors from some of the attempts
> to bring up the engine:
>
> 16:49:41 Maximum server connections 3
> 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> 0, Plog used 4, Llog used 2
> 16:49:45 Checkpoint Completed: duration was 0 seconds.
> 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e
> Interval: 4
> 16:49:45 Maximum server connections 3
> 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> 0, Plog used 164, Llog used 306
> 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k
> 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9
> 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9
> 16:49:45 Assert Failed: No Exception Handler
> 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2
> 16:49:45 Who: Thread(523, kaio, 0, 20)
> File: mtex.c Line: 490
> 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 16:49:45 Action: Please notify IBM Informix Technical Support.
> 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0
> 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception Handler.
> 16:49:50 Fatal error in ADM VP at mt.c:14045
> 16:49:50 Unexpected virtual processor termination, pid = 15203, exit =
> 0x100
> 16:49:50 PANIC: Attempting to bring system down
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
> 13:25:32 Loading Module <CNULL>
> 13:25:32 Booting Language <builtin> from module <>
> 13:25:32 Loading Module <BUILTINNULL>
> 13:25:39 DR: DRAUTO is 0 (Off)
> 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> 13:25:39 Fast poll /dev/poll enabled.
> 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115
> 13:25:41 Assert Failed: No Exception Handler
> 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2
> 13:25:41 Who: Session(23, informix@, 0, 0)
>
> Thread(29, tlitcppoll, 0, 51)
>
> File: mtex.c Line: 490
> 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 13:25:41 Action: Please notify IBM Informix Technical Support.
> 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
>
> 13:57:50 Loading Module <BUILTINNULL>
> 13:57:57 DR: DRAUTO is 0 (Off)
> 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> 13:57:57 Fast poll /dev/poll enabled.
> 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5
> 13:57:57 Assert Failed: No Exception Handler
> 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2
> 13:57:57 Who: Session(6, informix@, 0, 0)
>
> Thread(12, tlitcppoll, 0, 34)
>
> File: mtex.c Line: 490
> 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 13:57:57 Action: Please notify IBM Informix Technical Support.
> 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0
> 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception Handler.
> 13:58:03 PANIC: Attempting to bring system down
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
>
> 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial
> Number AAA#B000000
> 14:00:43 Value of FULL_DISK_INIT has been changed to 0.
> 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b
> 14:00:44 Assert Failed: No Exception Handler
> 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2
> 14:00:44 Who: Session(2, informix@, 0, 0)
>
> Thread(8, tlitcppoll, 0, 30)
>
> File: mtex.c Line: 490
> 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 14:00:44 Action: Please notify IBM Informix Technical Support.
> 14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0
> 14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler.
> 14:00:48 PANIC: Attempting to bring system down
>
> On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote:
>
> > Is there any notice in the online log at the time of the crash? If so,
> can
> > you post it here?
> >
> > Art
> >
> > Art S. Kagel, Principal Consultant
> >
> > Advanced DataTools (www.advancedatatools.com)
> > Blog: http://informix-myview.blogspot.com/
> >
> > Disclaimer: Please keep in mind that my own opinions are my own opinions
> > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> > other organization with which I am associated either explicitly,
> > implicitly, or by inference. Neither do those opinions reflect those of
> > other individuals affiliated with any entity with which I am affiliated
> nor
> > those of the entities themselves.
> >
> > On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com>
> > wrote:
> >
> > > Hi,
> > >
> > > We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris
> 11.
> > > We are having an issue if we set RESIDENT to -1 we cannot bring up the
> > > engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
> > > ok. Anyone have any ideas on this? historically we have always set
> > > RESIDENT to -1.> > >
> > > --Dave
> > >
> > > --089e01176087d8470604ea0c2a2d
> > >
> > >
> > >
> > >
> >
> >
>
>
*******************************************************************************
> > > Forum Note: Use "Reply" to post a response in the discussion forum.
> > >
> > >
> >
> > --047d7b34327052036804ea0c4bdc
> >
> >
> >
> >
>
>
*******************************************************************************
> > Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
>
> --001a11c372320dd86304ea0c905c
>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
--047d7b343ef212d42004ea0c9f80
Already opened a PMR yesterday. Nothing came up yet so I figured time to
email the group to see if anyone is running 11.70 on Solaris 11 and also
ran into this issue.
--Dave
On Thu, Oct 31, 2013 at 1:17 PM, Art Kagel <art.kagel@gmail.com> wrote:
> Hmm, nothing useful though. Time to open a PMR with IBM Support.
>
> Art
>
> Art S. Kagel, Principal Consultant
>
> Advanced DataTools (www.advancedatatools.com)
> Blog: http://informix-myview.blogspot.com/
>
> Disclaimer: Please keep in mind that my own opinions are my own opinions
> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> other organization with which I am associated either explicitly,
> implicitly, or by inference. Neither do those opinions reflect those of
> other individuals affiliated with any entity with which I am affiliated nor
> those of the entities themselves.
>
> On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote:
>
> > Sure online.log shows a few variety of errors depending on different
> > settings we tried. Here are a few of the errors from some of the attempts
> > to bring up the engine:
> >
> > 16:49:41 Maximum server connections 3
> > 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns
> blocked
> > 0, Plog used 4, Llog used 2
> > 16:49:45 Checkpoint Completed: duration was 0 seconds.
> > 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e
> > Interval: 4
> > 16:49:45 Maximum server connections 3
> > 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns
> blocked
> > 0, Plog used 164, Llog used 306
> > 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k
> > 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9
> > 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9
> > 16:49:45 Assert Failed: No Exception Handler
> > 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 16:49:45 Who: Thread(523, kaio, 0, 20)
> > File: mtex.c Line: 490
> > 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 16:49:45 Action: Please notify IBM Informix Technical Support.
> > 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0
> > 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception
> Handler.
> > 16:49:50 Fatal error in ADM VP at mt.c:14045
> > 16:49:50 Unexpected virtual processor termination, pid = 15203, exit =
> > 0x100
> > 16:49:50 PANIC: Attempting to bring system down
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> > 13:25:32 Loading Module <CNULL>
> > 13:25:32 Booting Language <builtin> from module <>
> > 13:25:32 Loading Module <BUILTINNULL>
> > 13:25:39 DR: DRAUTO is 0 (Off)
> > 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> > 13:25:39 Fast poll /dev/poll enabled.
> > 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115
> > 13:25:41 Assert Failed: No Exception Handler
> > 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 13:25:41 Who: Session(23, informix@, 0, 0)
> >
> > Thread(29, tlitcppoll, 0, 51)
> >
> > File: mtex.c Line: 490
> > 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 13:25:41 Action: Please notify IBM Informix Technical Support.
> > 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> >
> > 13:57:50 Loading Module <BUILTINNULL>
> > 13:57:57 DR: DRAUTO is 0 (Off)
> > 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> > 13:57:57 Fast poll /dev/poll enabled.
> > 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5
> > 13:57:57 Assert Failed: No Exception Handler
> > 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 13:57:57 Who: Session(6, informix@, 0, 0)
> >
> > Thread(12, tlitcppoll, 0, 34)
> >
> > File: mtex.c Line: 490
> > 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 13:57:57 Action: Please notify IBM Informix Technical Support.
> > 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0
> > 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception
> Handler.
> > 13:58:03 PANIC: Attempting to bring system down
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> >
> > 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial
> > Number AAA#B000000
> > 14:00:43 Value of FULL_DISK_INIT has been changed to 0.
> > 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b
> > 14:00:44 Assert Failed: No Exception Handler
> > 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 14:00:44 Who: Session(2, informix@, 0, 0)
> >
> > Thread(8, tlitcppoll, 0, 30)
> >
> > File: mtex.c Line: 490
> > 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 14:00:44 Action: Please notify IBM Informix Technical Support.
> > 14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0
> > 14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler.
> > 14:00:48 PANIC: Attempting to bring system down
> >
> > On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote:
> >
> > > Is there any notice in the online log at the time of the crash? If so,
> > can
> > > you post it here?
> > >
> > > Art
> > >
> > > Art S. Kagel, Principal Consultant
> > >
> > > Advanced DataTools (www.advancedatatools.com)
> > > Blog: http://informix-myview.blogspot.com/
> > >
> > > Disclaimer: Please keep in mind that my own opinions are my own
> opinions
> > > and do not reflect on my employer, Advanced DataTools, the IIUG, nor
> any
> > > other organization with which I am associated either explicitly,
> > > implicitly, or by inference. Neither do those opinions reflect those of
> > > other individuals affiliated with any entity with which I am affiliated
> > nor
> > > those of the entities themselves.
> > >
> > > On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com>
> > > wrote:
> > >
> > > > Hi,
> > > >
> > > > We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris
> > 11.
> > > > We are having an issue if we set RESIDENT to -1 we cannot bring up
> the
> > > > engine as it keeps crashing. If we set it to 0 or 1 the engine comes
> up
> > > > ok. Anyone have any ideas on this? historically we have always set
> > > > RESIDENT to -1.> > > >
> > > > --Dave
> > > >
> > > > --089e01176087d8470604ea0c2a2d
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*******************************************************************************
> > > > Forum Note: Use "Reply" to post a response in the discussion forum.
> > > >
> > > >
> > >
> > > --047d7b34327052036804ea0c4bdc
> > >
> > >
> > >
> > >
> >
> >
>
>
*******************************************************************************
> > > Forum Note: Use "Reply" to post a response in the
No, not time to open a PMR, time to send me the contents of the af files.
Try again, send the onconfig file and af file, and spec of the host machine
including memory size.
Also try starting the server with oninit -v and send the output.
You probably have overcommited memory on the host.
David.
On 31 October 2013 at 17:17 Art Kagel <art.kagel@gmail.com> wrote:
> Hmm, nothing useful though. Time to open a PMR with IBM Support.
>
> Art
>
> Art S. Kagel, Principal Consultant
>
> Advanced DataTools (www.advancedatatools.com)
> Blog: http://informix-myview.blogspot.com/
>
> Disclaimer: Please keep in mind that my own opinions are my own opinions
> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> other organization with which I am associated either explicitly,
> implicitly, or by inference. Neither do those opinions reflect those of
> other individuals affiliated with any entity with which I am affiliated nor
> those of the entities themselves.
>
> On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote:
>
> > Sure online.log shows a few variety of errors depending on different
> > settings we tried. Here are a few of the errors from some of the attempts
> > to bring up the engine:
> >
> > 16:49:41 Maximum server connections 3
> > 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> > 0, Plog used 4, Llog used 2
> > 16:49:45 Checkpoint Completed: duration was 0 seconds.
> > 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e
> > Interval: 4
> > 16:49:45 Maximum server connections 3
> > 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> > 0, Plog used 164, Llog used 306
> > 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k
> > 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9
> > 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9
> > 16:49:45 Assert Failed: No Exception Handler
> > 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 16:49:45 Who: Thread(523, kaio, 0, 20)
> > File: mtex.c Line: 490
> > 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 16:49:45 Action: Please notify IBM Informix Technical Support.
> > 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0
> > 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception Handler.
> > 16:49:50 Fatal error in ADM VP at mt.c:14045
> > 16:49:50 Unexpected virtual processor termination, pid = 15203, exit =
> > 0x100
> > 16:49:50 PANIC: Attempting to bring system down
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> > 13:25:32 Loading Module <CNULL>
> > 13:25:32 Booting Language <builtin> from module <>
> > 13:25:32 Loading Module <BUILTINNULL>
> > 13:25:39 DR: DRAUTO is 0 (Off)
> > 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> > 13:25:39 Fast poll /dev/poll enabled.
> > 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115
> > 13:25:41 Assert Failed: No Exception Handler
> > 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 13:25:41 Who: Session(23, informix@, 0, 0)
> >
> > Thread(29, tlitcppoll, 0, 51)
> >
> > File: mtex.c Line: 490
> > 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 13:25:41 Action: Please notify IBM Informix Technical Support.
> > 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> >
> > 13:57:50 Loading Module <BUILTINNULL>
> > 13:57:57 DR: DRAUTO is 0 (Off)
> > 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> > 13:57:57 Fast poll /dev/poll enabled.
> > 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5
> > 13:57:57 Assert Failed: No Exception Handler
> > 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 13:57:57 Who: Session(6, informix@, 0, 0)
> >
> > Thread(12, tlitcppoll, 0, 34)
> >
> > File: mtex.c Line: 490
> > 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 13:57:57 Action: Please notify IBM Informix Technical Support.
> > 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0
> > 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception Handler.
> > 13:58:03 PANIC: Attempting to bring system down
> >
> > ---------------------------------------------
> > Next Error From Log
> > ---------------------------------------------
> >
> > 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial
> > Number AAA#B000000
> > 14:00:43 Value of FULL_DISK_INIT has been changed to 0.
> > 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b
> > 14:00:44 Assert Failed: No Exception Handler
> > 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2
> > 14:00:44 Who: Session(2, informix@, 0, 0)
> >
> > Thread(8, tlitcppoll, 0, 30)
> >
> > File: mtex.c Line: 490
> > 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> > 14:00:44 Action: Please notify IBM Informix Technical Support.
> > 14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0
> > 14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler.
> > 14:00:48 PANIC: Attempting to bring system down
> >
> > On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote:
> >
> > > Is there any notice in the online log at the time of the crash? If so,
> > can
> > > you post it here?
> > >
> > > Art
> > >
> > > Art S. Kagel, Principal Consultant
> > >
> > > Advanced DataTools (www.advancedatatools.com)
> > > Blog: http://informix-myview.blogspot.com/
> > >
> > > Disclaimer: Please keep in mind that my own opinions are my own opinions
> > > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> > > other organization with which I am associated either explicitly,
> > > implicitly, or by inference. Neither do those opinions reflect those of
> > > other individuals affiliated with any entity with which I am affiliated
> > nor
> > > those of the entities themselves.
> > >
> > > On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com>
> > > wrote:
> > >
> > > > Hi,
> > > >
> > > > We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris
> > 11.
> > > > We are having an issue if we set RESIDENT to -1 we cannot bring up the
> > > > engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
> > > > ok. Anyone have any ideas on this? historically we have always set
> > > > RESIDENT to -1.> > > >
> > > > --Dave
> > > >
> > > > --089e01176087d8470604ea0c2a2d
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
*******************************************************************************
> > > > Forum Note: Use "Reply" to post a response in the discussion forum.
> > > >
> > > >
> > >
> > > --047d7b34327052036804ea0c4bdc
> > >
> > >
> > >
> > >
> >
> >
>
*******************************************************************************@@N
Hi ,
Would checking the installation release notes on kernel setting requirement
help?
Regards,
In4mixDBA, KL
Sent from Samsung tabletArt Kagel <art.kagel@gmail.com> wrote:Hmm, nothing
useful though. Time to open a PMR with IBM Support.
Art
Art S. Kagel, Principal Consultant
Advanced DataTools (www.advancedatatools.com)
Blog: http://informix-myview.blogspot.com/
Disclaimer: Please keep in mind that my own opinions are my own opinions
and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
other organization with which I am associated either explicitly,
implicitly, or by inference. Neither do those opinions reflect those of
other individuals affiliated with any entity with which I am affiliated nor
those of the entities themselves.
On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote:
> Sure online.log shows a few variety of errors depending on different
> settings we tried. Here are a few of the errors from some of the attempts
> to bring up the engine:
>
> 16:49:41 Maximum server connections 3
> 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> 0, Plog used 4, Llog used 2
> 16:49:45 Checkpoint Completed: duration was 0 seconds.
> 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e
> Interval: 4
> 16:49:45 Maximum server connections 3
> 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked
> 0, Plog used 164, Llog used 306
> 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k
> 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9
> 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9
> 16:49:45 Assert Failed: No Exception Handler
> 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2
> 16:49:45 Who: Thread(523, kaio, 0, 20)
> File: mtex.c Line: 490
> 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 16:49:45 Action: Please notify IBM Informix Technical Support.
> 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0
> 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception Handler.
> 16:49:50 Fatal error in ADM VP at mt.c:14045
> 16:49:50 Unexpected virtual processor termination, pid = 15203, exit =
> 0x100
> 16:49:50 PANIC: Attempting to bring system down
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
> 13:25:32 Loading Module <CNULL>
> 13:25:32 Booting Language <builtin> from module <>
> 13:25:32 Loading Module <BUILTINNULL>
> 13:25:39 DR: DRAUTO is 0 (Off)
> 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> 13:25:39 Fast poll /dev/poll enabled.
> 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115
> 13:25:41 Assert Failed: No Exception Handler
> 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2
> 13:25:41 Who: Session(23, informix@, 0, 0)
>
> Thread(29, tlitcppoll, 0, 51)
>
> File: mtex.c Line: 490
> 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 13:25:41 Action: Please notify IBM Informix Technical Support.
> 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
>
> 13:57:50 Loading Module <BUILTINNULL>
> 13:57:57 DR: DRAUTO is 0 (Off)
> 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled)
> 13:57:57 Fast poll /dev/poll enabled.
> 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5
> 13:57:57 Assert Failed: No Exception Handler
> 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2
> 13:57:57 Who: Session(6, informix@, 0, 0)
>
> Thread(12, tlitcppoll, 0, 34)
>
> File: mtex.c Line: 490
> 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 13:57:57 Action: Please notify IBM Informix Technical Support.
> 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0
> 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception Handler.
> 13:58:03 PANIC: Attempting to bring system down
>
> ---------------------------------------------
> Next Error From Log
> ---------------------------------------------
>
> 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial
> Number AAA#B000000
> 14:00:43 Value of FULL_DISK_INIT has been changed to 0.
> 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b
> 14:00:44 Assert Failed: No Exception Handler
> 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2
> 14:00:44 Who: Session(2, informix@, 0, 0)
>
> Thread(8, tlitcppoll, 0, 30)
>
> File: mtex.c Line: 490
> 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem
> 14:00:44 Action: Please notify IBM Informix Technical Support.
> 14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0
> 14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler.
> 14:00:48 PANIC: Attempting to bring system down
>
> On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote:
>
> > Is there any notice in the online log at the time of the crash? If so,
> can
> > you post it here?
> >
> > Art
> >
> > Art S. Kagel, Principal Consultant
> >
> > Advanced DataTools (www.advancedatatools.com)
> > Blog: http://informix-myview.blogspot.com/
> >
> > Disclaimer: Please keep in mind that my own opinions are my own opinions
> > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any
> > other organization with which I am associated either explicitly,
> > implicitly, or by inference. Neither do those opinions reflect those of
> > other individuals affiliated with any entity with which I am affiliated
> nor
> > those of the entities themselves.
> >
> > On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com>
> > wrote:
> >
> > > Hi,
> > >
> > > We are migrating our Informix 11.70.FC7W2 from Solaris 10 to Solaris
> 11.
> > > We are having an issue if we set RESIDENT to -1 we cannot bring up the
> > > engine as it keeps crashing. If we set it to 0 or 1 the engine comes up
> > > ok. Anyone have any ideas on this? historically we have always set
> > > RESIDENT to -1.> > >
> > > --Dave
> > >
> > > --089e01176087d8470604ea0c2a2d
> > >
> > >
> > >
> > >
> >
> >
>
>
*******************************************************************************
> > > Forum Note: Use "Reply" to post a response in the discussion forum.
> > >
> > >
> >
> > --047d7b34327052036804ea0c4bdc
> >
> >
> >
> >
>
>
*******************************************************************************
> > Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
>
> --001a11c372320dd86304ea0c905c
>
>
>
>
*******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
--047d7b343ef212d42004ea0c9f80
*******************************************************************************
Forum Note: Use "Reply" to post a
Checking the kernel settings couldn't hurt. Hmm, just remembered a similar situation: It could be that the kernel setting for the maximum resident memory may be set too low to allow the virtual segment to become resident. The engine usually detects that error and just reallocates the virtual segment without residency, but that could trigger a bug causing a crash. Art Art S. Kagel, Principal Consultant Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer, Advanced DataTools, the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Thu, Oct 31, 2013 at 11:08 PM, ukufarafah2009 <ukufarafah2009@gmail.com>wrote: > Hi , > > Would checking the installation release notes on kernel setting requirement > help? > > Regards, > > In4mixDBA, KL > > Sent from Samsung tabletArt Kagel <art.kagel@gmail.com> wrote:Hmm, nothing > useful though. Time to open a PMR with IBM Support. > > Art > > Art S. Kagel, Principal Consultant > > Advanced DataTools (www.advancedatatools.com) > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > other organization with which I am associated either explicitly, > implicitly, or by inference. Neither do those opinions reflect those of > other individuals affiliated with any entity with which I am affiliated nor > those of the entities themselves. > > On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote: > > > Sure online.log shows a few variety of errors depending on different > > settings we tried. Here are a few of the errors from some of the attempts > > to bring up the engine: > > > > 16:49:41 Maximum server connections 3 > > 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns > blocked > > 0, Plog used 4, Llog used 2 > > 16:49:45 Checkpoint Completed: duration was 0 seconds. > > 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e > > Interval: 4 > > 16:49:45 Maximum server connections 3 > > 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns > blocked > > 0, Plog used 164, Llog used 306 > > 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k > > 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9 > > 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9 > > 16:49:45 Assert Failed: No Exception Handler > > 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2 > > 16:49:45 Who: Thread(523, kaio, 0, 20) > > File: mtex.c Line: 490 > > 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > 16:49:45 Action: Please notify IBM Informix Technical Support. > > 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0 > > 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception > Handler. > > 16:49:50 Fatal error in ADM VP at mt.c:14045 > > 16:49:50 Unexpected virtual processor termination, pid = 15203, exit = > > 0x100 > > 16:49:50 PANIC: Attempting to bring system down > > > > --------------------------------------------- > > Next Error From Log > > --------------------------------------------- > > 13:25:32 Loading Module <CNULL> > > 13:25:32 Booting Language <builtin> from module <> > > 13:25:32 Loading Module <BUILTINNULL> > > 13:25:39 DR: DRAUTO is 0 (Off) > > 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled) > > 13:25:39 Fast poll /dev/poll enabled. > > 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115 > > 13:25:41 Assert Failed: No Exception Handler > > 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2 > > 13:25:41 Who: Session(23, informix@, 0, 0) > > > > Thread(29, tlitcppoll, 0, 51) > > > > File: mtex.c Line: 490 > > 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > 13:25:41 Action: Please notify IBM Informix Technical Support. > > 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0 > > > > --------------------------------------------- > > Next Error From Log > > --------------------------------------------- > > > > 13:57:50 Loading Module <BUILTINNULL> > > 13:57:57 DR: DRAUTO is 0 (Off) > > 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled) > > 13:57:57 Fast poll /dev/poll enabled. > > 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5 > > 13:57:57 Assert Failed: No Exception Handler > > 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2 > > 13:57:57 Who: Session(6, informix@, 0, 0) > > > > Thread(12, tlitcppoll, 0, 34) > > > > File: mtex.c Line: 490 > > 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > 13:57:57 Action: Please notify IBM Informix Technical Support. > > 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0 > > 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception > Handler. > > 13:58:03 PANIC: Attempting to bring system down > > > > --------------------------------------------- > > Next Error From Log > > --------------------------------------------- > > > > 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial > > Number AAA#B000000 > > 14:00:43 Value of FULL_DISK_INIT has been changed to 0. > > 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b > > 14:00:44 Assert Failed: No Exception Handler > > 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2 > > 14:00:44 Who: Session(2, informix@, 0, 0) > > > > Thread(8, tlitcppoll, 0, 30) > > > > File: mtex.c Line: 490 > > 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > 14:00:44 Action: Please notify IBM Informix Technical Support. > > 14:00:44 See Also: /var/tmp/af.3f0494b, shmem.3f0494b.0 > > 14:00:48 mtex.c, line 490, thread 8, proc id 14297, No Exception Handler. > > 14:00:48 PANIC: Attempting to bring system down > > > > On Thu, Oct 31, 2013 at 12:53 PM, Art Kagel <art.kagel@gmail.com> wrote: > > > > > Is there any notice in the online log at the time of the crash? If so, > > can > > > you post it here? > > > > > > Art > > > > > > Art S. Kagel, Principal Consultant > > > > > > Advanced DataTools (www.advancedatatools.com) > > > Blog: http://informix-myview.blogspot.com/ > > > > > > Disclaimer: Please keep in mind that my own opinions are my own > opinions > > > and do not reflect on my employer, Advanced DataTools, the IIUG, nor > any > > > other organization with which I am associated either explicitly, > > > implicitly, or by inference. Neither do those opinions reflect those of > > > other individuals affiliated with any entity with which I am affiliated > > nor > > > those of the entities themselves. > > > > > > On Thu, Oct 31, 2013 at 12:44 PM, Informix DBA <in4mixdba@gmail.com> > > > wrote: > > > > > > > Hi, > > > > > > > > We are migrati
Hello. I just saw the machine notes for solaris 64, and there are several recommendations for projects allocated memory, a feature that solaris 10 does not had, including numbers of simultaneous sessions through tli network protocol. That should also be your case. Check that all are fine, since you´re in the latest release + fix packs, I don´t think you might be hitting some bug. 11.70 is already GE a long time ago, and is very stable in release 7. Regards. Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 / v12.10 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional Informix Senior DBA - Orizon Brasil BRIUG website administrator Informix independent consultant > To: ids@iiug.org > From: art.kagel@gmail.com > Subject: Re: Informix on Solaris 11 [31859] > Date: Fri, 1 Nov 2013 06:17:11 -0400 > > Checking the kernel settings couldn't hurt. Hmm, just remembered a similar > situation: It could be that the kernel setting for the maximum resident > memory may be set too low to allow the virtual segment to become resident. > The engine usually detects that error and just reallocates the virtual > segment without residency, but that could trigger a bug causing a crash. > > Art > > Art S. Kagel, Principal Consultant > > Advanced DataTools (www.advancedatatools.com) > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > other organization with which I am associated either explicitly, > implicitly, or by inference. Neither do those opinions reflect those of > other individuals affiliated with any entity with which I am affiliated nor > those of the entities themselves. > > On Thu, Oct 31, 2013 at 11:08 PM, ukufarafah2009 > <ukufarafah2009@gmail.com>wrote: > > > Hi , > > > > Would checking the installation release notes on kernel setting requirement > > help? > > > > Regards, > > > > In4mixDBA, KL > > > > Sent from Samsung tabletArt Kagel <art.kagel@gmail.com> wrote:Hmm, nothing > > useful though. Time to open a PMR with IBM Support. > > > > Art > > > > Art S. Kagel, Principal Consultant > > > > Advanced DataTools (www.advancedatatools.com) > > Blog: http://informix-myview.blogspot.com/ > > > > Disclaimer: Please keep in mind that my own opinions are my own opinions > > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > > other organization with which I am associated either explicitly, > > implicitly, or by inference. Neither do those opinions reflect those of > > other individuals affiliated with any entity with which I am affiliated nor > > those of the entities themselves. > > > > On Thu, Oct 31, 2013 at 1:13 PM, Informix DBA <in4mixdba@gmail.com> wrote: > > > > > Sure online.log shows a few variety of errors depending on different > > > settings we tried. Here are a few of the errors from some of the attempts > > > to bring up the engine: > > > > > > 16:49:41 Maximum server connections 3 > > > 16:49:41 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns > > blocked > > > 0, Plog used 4, Llog used 2 > > > 16:49:45 Checkpoint Completed: duration was 0 seconds. > > > 16:49:45 Wed Oct 30 - loguniq 1, logpos 0x13417c, timestamp: 0x256e > > > Interval: 4 > > > 16:49:45 Maximum server connections 3 > > > 16:49:45 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns > > blocked > > > 0, Plog used 164, Llog used 306 > > > 16:49:45 Adjusting LRU for bufferpool - id 0 size 2k > > > 16:49:45 Old max 20.0 min 10.0 New max 19.8 min 9.9 > > > 16:49:45 stack trace for pid 15203 written to /var/tmp/af.5f370e9 > > > 16:49:45 Assert Failed: No Exception Handler > > > 16:49:45 IBM Informix Dynamic Server Version 11.70.FC7W2 > > > 16:49:45 Who: Thread(523, kaio, 0, 20) > > > File: mtex.c Line: 490 > > > 16:49:45 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > > 16:49:45 Action: Please notify IBM Informix Technical Support. > > > 16:49:45 See Also: /var/tmp/af.5f370e9, shmem.5f370e9.0 > > > 16:49:50 mtex.c, line 490, thread 523, proc id 15203, No Exception > > Handler. > > > 16:49:50 Fatal error in ADM VP at mt.c:14045 > > > 16:49:50 Unexpected virtual processor termination, pid = 15203, exit = > > > 0x100 > > > 16:49:50 PANIC: Attempting to bring system down > > > > > > --------------------------------------------- > > > Next Error From Log > > > --------------------------------------------- > > > 13:25:32 Loading Module <CNULL> > > > 13:25:32 Booting Language <builtin> from module <> > > > 13:25:32 Loading Module <BUILTINNULL> > > > 13:25:39 DR: DRAUTO is 0 (Off) > > > 13:25:39 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled) > > > 13:25:39 Fast poll /dev/poll enabled. > > > 13:25:41 stack trace for pid 7553 written to /var/tmp/af.4054115 > > > 13:25:41 Assert Failed: No Exception Handler > > > 13:25:41 IBM Informix Dynamic Server Version 11.70.FC7W2 > > > 13:25:41 Who: Session(23, informix@, 0, 0) > > > > > > Thread(29, tlitcppoll, 0, 51) > > > > > > File: mtex.c Line: 490 > > > 13:25:41 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > > 13:25:41 Action: Please notify IBM Informix Technical Support. > > > 13:25:41 See Also: /var/tmp/af.4054115, shmem.4054115.0 > > > > > > --------------------------------------------- > > > Next Error From Log > > > --------------------------------------------- > > > > > > 13:57:50 Loading Module <BUILTINNULL> > > > 13:57:57 DR: DRAUTO is 0 (Off) > > > 13:57:57 DR: ENCRYPT_HDR is 0 (HDR encryption Disabled) > > > 13:57:57 Fast poll /dev/poll enabled. > > > 13:57:57 stack trace for pid 14023 written to /var/tmp/af.3f448a5 > > > 13:57:57 Assert Failed: No Exception Handler > > > 13:57:57 IBM Informix Dynamic Server Version 11.70.FC7W2 > > > 13:57:57 Who: Session(6, informix@, 0, 0) > > > > > > Thread(12, tlitcppoll, 0, 34) > > > > > > File: mtex.c Line: 490 > > > 13:57:57 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > > 13:57:57 Action: Please notify IBM Informix Technical Support. > > > 13:57:57 See Also: /var/tmp/af.3f448a5, shmem.3f448a5.0 > > > 13:58:02 mtex.c, line 490, thread 12, proc id 14023, No Exception > > Handler. > > > 13:58:03 PANIC: Attempting to bring system down > > > > > > --------------------------------------------- > > > Next Error From Log > > > --------------------------------------------- > > > > > > 14:00:43 IBM Informix Dynamic Server Version 11.70.FC7W2 Software Serial > > > Number AAA#B000000 > > > 14:00:43 Value of FULL_DISK_INIT has been changed to 0. > > > 14:00:44 stack trace for pid 14297 written to /var/tmp/af.3f0494b > > > 14:00:44 Assert Failed: No Exception Handler > > > 14:00:44 IBM Informix Dynamic Server Version 11.70.FC7W2 > > > 14:00:44 Who: Session(2, informix@, 0, 0) > > > > > > Thread(8, tlitcppoll, 0, 30) > > > > > > File: mtex.c Line: 490 > > > 14:00:44 Results: Exception Caught. Type: MT_EX_OS, Context: mem > > > 14:00:44 Action: Please notify IBM Informix Technical Support
Are you using containers? I seem to remember something like this at a customer site, but it wasn't Solaris 11 as such, but a change within Solaris to how memory is allocated to containers via "projects". Ping me on Monday if still not fixed and I'll ask my colleague who fixed it. Neil
What does the output from: prctl -n project.max-shm-memory -i project default show?
Neil, Thank you. prctl is: prctl -n project.max-shm-memory -i project default project: 3: default NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT project.max-shm-memory privileged 128GB - deny - system 16.0EB max deny - --Dave On Tue, Nov 5, 2013 at 6:04 PM, NEIL TRUBY <neil.truby@ardenta.com> wrote: > What does the output from: > > prctl -n project.max-shm-memory -i project default > > show? > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --089e011770dbaf368a04ea880653