IDS FC3 on Windows Vista Business x64...
A user installing IDS 11.50.FC3 on Windows Vista Business x64 found the server would not start: the service did nothing and running oninit -v as the informix user returned "Only members of IXDBSA group (Informix-Admin, by default) can start IBM Informix Dynamic Server", even though the user was in Informix-Admin. A respondent had him run 'whoami /all', which confirmed Informix-Admin membership (though BUILTIN\\Administrators showed as "used for deny only", i.e. a UAC-filtered token). Further suggestions were to log off/reboot to refresh credentials, try running the service as Local System, and start the instance the first time with -iy. The thread ends there with no confirmed fix recorded.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\Co
mmon Files\\\\Roxio Shared\\\\10.0\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\ThinkPad\\\\ConnectU
tilities\\\\;C:\\\\Program Files\\\\Common Files\\\\Lenovo;C:\\\\Program Files
(x86)\\\\Lenovo\\\\Cli
ent Security Solution;C:\\\\Program Files\\\\Lenovo\\\\Client Security
Solution;c:\\\\Progra
m Files (x86)\\\\Microsoft SQL Server\\\\90\\\\Tools\\\\binn\\\\;C:\\\\Program
Files\\\\Intel\\\\WiFi\\\\bi
n\\\\;C:\\\\Users\\\\Jean Georges\\\\Documents\\\\bin;c:\\\\cygwin\\\\bin;C:\\\\Program Files
(x86)\\\\Quic
kTime\\\\QTSystem\\\\;C:\\\\cygwin\\\\bin;C:\\\\VXIPNP\\\\WinNT\\\\Bin;C:\\\\Program Files
(x86)\\\\WinSCP\\\\
;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\bin;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\lib64
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLASSPATH=C:\\\\PROGRA~1
\\\\IBM\\\\IBMINF~1\\\\11.50\\\\extend\\\\krakatoa\\\\krakatoa.jar;C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11
.50\\\\
extend\\\\krakatoa\\\\jdbc.jar;.;C:\\\\Program Files
(x86)\\\\Java\\\\jre6\\\\lib\\\\ext\\\\QTJava.zip
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DBTEMP=C:\\\\PROGRA~1\\\\IB
M\\\\IBMINF~1\\\\11.50\\\\infxtmp
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLIENT_LOCALE=EN_US.CP1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DB_LOCALE=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
SERVER_LOCALE=EN_US.U
TF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set DBLANG=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>mode con codepage
select=
1252
Status for device CON:
----------------------
Lines: 300
Columns: 80
Keyboard rate: 31
Keyboard delay: 1
Code page: 1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>cd
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF
~1\\\\11.50
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>oninit -v
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>
here is the log (which changes when I try to start the service):
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>cat ol_duckrogers.log
18:47:23 IBM Informix Dynamic Server Started.
18:47:23 Requested shared memory segment size rounded from 32656KB to
32704KB
18:52:31 IBM Informix Dynamic Server Started.
18:52:31 Requested shared memory segment size rounded from 32656KB to
32704KB
19:08:11 IBM Informix Dynamic Server Started.
19:08:11 Requested shared memory segment size rounded from 32656KB to
32704KB
22:05:50 IBM Informix Dynamic Server Started.
22:05:50 Requested shared memory segment size rounded from 32656KB to
32704KB
jgp
Hi Jean Georges,
If you type "whoami /all" from that prompt, does it say you are a member of
the Informix-Admin group?
If the answer is no, logoff and log back in again to refresh your token
information.
If the answer is yes, can you paste the "PRIVILEGES INFORMATION" here.
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 11:21:39 AM
Subject: IDS FC3 on Windows Vista Business x64... [14805]
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\Co
mmon Files\\\\Roxio Shared\\\\10.0\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\ThinkPad\\\\ConnectU
tilities\\\\;C:\\\\Program Files\\\\Common Files\\\\Lenovo;C:\\\\Program Files
(x86)\\\\Lenovo\\\\Cli
ent Security Solution;C:\\\\Program Files\\\\Lenovo\\\\Client Security
Solution;c:\\\\Progra
m Files (x86)\\\\Microsoft SQL Server\\\\90\\\\Tools\\\\binn\\\\;C:\\\\Program
Files\\\\Intel\\\\WiFi\\\\bi
n\\\\;C:\\\\Users\\\\Jean Georges\\\\Documents\\\\bin;c:\\\\cygwin\\\\bin;C:\\\\Program Files
(x86)\\\\Quic
kTime\\\\QTSystem\\\\;C:\\\\cygwin\\\\bin;C:\\\\VXIPNP\\\\WinNT\\\\Bin;C:\\\\Program Files
(x86)\\\\WinSCP\\\\
;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\bin;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\lib64
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLASSPATH=C:\\\\PROGRA~1
\\\\IBM\\\\IBMINF~1\\\\11.50\\\\extend\\\\krakatoa\\\\krakatoa.jar;C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11
..50\\\\
extend\\\\krakatoa\\\\jdbc.jar;.;C:\\\\Program Files
(x86)\\\\Java\\\\jre6\\\\lib\\\\ext\\\\QTJava.zip
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DBTEMP=C:\\\\PROGRA~1\\\\IB
M\\\\IBMINF~1\\\\11.50\\\\infxtmp
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLIENT_LOCALE=EN_US.CP1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DB_LOCALE=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
SERVER_LOCALE=EN_US.U
TF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set DBLANG=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>mode con codepage
select=
1252
Status for device CON:
----------------------
Lines: 300
Columns: 80
Keyboard rate: 31
Keyboard delay: 1
Code page: 1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>cd
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF
~1\\\\11.50
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>oninit -v
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>
here is the log (which changes when I try to start the service):
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>cat ol_duckrogers.log
18:47:23 IBM Informix Dynamic Server Started.
18:47:23 Requested shared memory segment size rounded from 32656KB to
32704KB
18:52:31 IBM Informix Dynamic Server Started.
18:52:31 Requested shared memory segment size rounded from 32656KB to
32704KB
19:08:11 IBM Informix Dynamic Server Started.
19:08:11 Requested shared memory segment size rounded from 32656KB to
32704KB
22:05:50 IBM Informix Dynamic Server Started.
22:05:50 Requested shared memory segment size rounded from 32656KB to
32704KB
jgp
*******************************************************************************
Forum Note: Use "Reply" to post a response in the discussion forum.
here is the result...
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>whoami /all
USER INFORMATION
----------------
User Name SID
=================== ==============================================
duckrogers\\\\informix S-1-5-21-1146109046-1584904098-1683932520-1008
GROUP INFORMATION
-----------------
Group Name Type SID
Attributes
====================================== ================
==============================================
==================================================
Everyone Well-known group S-1-1-0
Mandatory group, Enabled by default, Enabled group
DuckRogers\\\\Informix-Admin Alias
S-1-5-21-1146109046-1584904098-1683932520-1007 Mandatory group, Enabled by
default, Enabled group
BUILTIN\\\\Administrators Alias S-1-5-32-544
Group used for deny only
BUILTIN\\\\Users Alias S-1-5-32-545
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\INTERACTIVE Well-known group S-1-5-4
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\Authenticated Users Well-known group S-1-5-11
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\This Organization Well-known group S-1-5-15
Mandatory group, Enabled by default, Enabled group
LOCAL Well-known group S-1-2-0
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\NTLM Authentication Well-known group S-1-5-64-10
Mandatory group, Enabled by default, Enabled group
Mandatory Label\\\\Medium Mandatory Level Unknown SID type S-1-16-8192
Mandatory group, Enabled by default, Enabled group
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ==================================== ========
SeShutdownPrivilege Shut down the system Disabled
SeChangeNotifyPrivilege Bypass traverse checking Enabled
SeUndockPrivilege Remove computer from docking station Disabled
SeIncreaseWorkingSetPrivilege Increase a process working set Disabled
SeTimeZonePrivilege Change the time zone Disabled
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 21:21
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14806]
Hi Jean Georges,
If you type "whoami /all" from that prompt, does it say you are a member of
the Informix-Admin group?
If the answer is no, logoff and log back in again to refresh your token
information.
If the answer is yes, can you paste the "PRIVILEGES INFORMATION" here.
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 11:21:39 AM
Subject: IDS FC3 on Windows Vista Business x64... [14805]
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\Co
mmon Files\\\\Roxio Shared\\\\10.0\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\ThinkPad\\\\ConnectU
tilities\\\\;C:\\\\Program Files\\\\Common Files\\\\Lenovo;C:\\\\Program Files
(x86)\\\\Lenovo\\\\Cli
ent Security Solution;C:\\\\Program Files\\\\Lenovo\\\\Client Security
Solution;c:\\\\Progra
m Files (x86)\\\\Microsoft SQL Server\\\\90\\\\Tools\\\\binn\\\\;C:\\\\Program
Files\\\\Intel\\\\WiFi\\\\bi
n\\\\;C:\\\\Users\\\\Jean Georges\\\\Documents\\\\bin;c:\\\\cygwin\\\\bin;C:\\\\Program Files
(x86)\\\\Quic
kTime\\\\QTSystem\\\\;C:\\\\cygwin\\\\bin;C:\\\\VXIPNP\\\\WinNT\\\\Bin;C:\\\\Program Files
(x86)\\\\WinSCP\\\\
;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\bin;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\lib64
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLASSPATH=C:\\\\PROGRA~1
\\\\IBM\\\\IBMINF~1\\\\11.50\\\\extend\\\\krakatoa\\\\krakatoa.jar;C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11
...50\\\\
extend\\\\krakatoa\\\\jdbc.jar;.;C:\\\\Program Files
(x86)\\\\Java\\\\jre6\\\\lib\\\\ext\\\\QTJava.zip
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DBTEMP=C:\\\\PROGRA~1\\\\IB
M\\\\IBMINF~1\\\\11.50\\\\infxtmp
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLIENT_LOCALE=EN_US.CP1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DB_LOCALE=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
SERVER_LOCALE=EN_US.U
TF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set DBLANG=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>mode con codepage
select=
1252
Status for device CON:
----------------------
Lines: 300
Columns: 80
Keyboard rate: 31
Keyboard delay: 1
Code page: 1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>cd
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF
~1\\\\11.50
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>oninit -v
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>
here is the log (which changes when I try to start the service):
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>cat ol_duckrogers.log
18:47:23 IBM Informix Dynamic Server Started.
18:47:23 Requested shared memory segment size rounded from 32656KB to
32704KB
18:52:31 IBM Informix Dynamic Server Started.
18:52:31 Requested shared memory segment size rounded from 32656KB to
32704KB
19:08:11 IBM Informix Dynamic Server Started.
19:08:11 Requested shared memory segment size rounded from 32656KB to
32704KB
22:05:50 IBM Informix Dynamic Server Started.
22:05:50 Requested shared memory segment size rounded from 32656KB to
32704KB
jgp
****************************************************************************
***
Forum Note: Use "Reply" to post a response in the discuss
I get the same group and privilege results, so not that...
Have you tried rebooting just in case the service control task hasn't
refreshed credentials? (this shouldn't be necesary)
Does the service start if you change it to log on as the local system user?
(if the service has never successfully started you would need to start it with
-iy for the first time, e.g. starts %informixserver% -iy)
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 12:36:03 PM
Subject: RE: IDS FC3 on Windows Vista Business x64... [14807]
here is the result...
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>whoami /all
USER INFORMATION
----------------
User Name SID
=================== ==============================================
duckrogers\\\\informix S-1-5-21-1146109046-1584904098-1683932520-1008
GROUP INFORMATION
-----------------
Group Name Type SID
Attributes
====================================== ================
==============================================
==================================================
Everyone Well-known group S-1-1-0
Mandatory group, Enabled by default, Enabled group
DuckRogers\\\\Informix-Admin Alias
S-1-5-21-1146109046-1584904098-1683932520-1007 Mandatory group, Enabled by
default, Enabled group
BUILTIN\\\\Administrators Alias S-1-5-32-544
Group used for deny only
BUILTIN\\\\Users Alias S-1-5-32-545
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\INTERACTIVE Well-known group S-1-5-4
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\Authenticated Users Well-known group S-1-5-11
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\This Organization Well-known group S-1-5-15
Mandatory group, Enabled by default, Enabled group
LOCAL Well-known group S-1-2-0
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\NTLM Authentication Well-known group S-1-5-64-10
Mandatory group, Enabled by default, Enabled group
Mandatory Label\\\\Medium Mandatory Level Unknown SID type S-1-16-8192
Mandatory group, Enabled by default, Enabled group
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ==================================== ========
SeShutdownPrivilege Shut down the system Disabled
SeChangeNotifyPrivilege Bypass traverse checking Enabled
SeUndockPrivilege Remove computer from docking station Disabled
SeIncreaseWorkingSetPrivilege Increase a process working set Disabled
SeTimeZonePrivilege Change the time zone Disabled
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 21:21
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14806]
Hi Jean Georges,
If you type "whoami /all" from that prompt, does it say you are a member of
the Informix-Admin group?
If the answer is no, logoff and log back in again to refresh your token
information.
If the answer is yes, can you paste the "PRIVILEGES INFORMATION" here.
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 11:21:39 AM
Subject: IDS FC3 on Windows Vista Business x64... [14805]
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\Co
mmon Files\\\\Roxio Shared\\\\10.0\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\ThinkPad\\\\ConnectU
tilities\\\\;C:\\\\Program Files\\\\Common Files\\\\Lenovo;C:\\\\Program Files
(x86)\\\\Lenovo\\\\Cli
ent Security Solution;C:\\\\Program Files\\\\Lenovo\\\\Client Security
Solution;c:\\\\Progra
m Files (x86)\\\\Microsoft SQL Server\\\\90\\\\Tools\\\\binn\\\\;C:\\\\Program
Files\\\\Intel\\\\WiFi\\\\bi
n\\\\;C:\\\\Users\\\\Jean Georges\\\\Documents\\\\bin;c:\\\\cygwin\\\\bin;C:\\\\Program Files
(x86)\\\\Quic
kTime\\\\QTSystem\\\\;C:\\\\cygwin\\\\bin;C:\\\\VXIPNP\\\\WinNT\\\\Bin;C:\\\\Program Files
(x86)\\\\WinSCP\\\\
;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\bin;C:\\\\PROGRA~2\\\\IBM\\\\GSK7_64\\\\lib64
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLASSPATH=C:\\\\PROGRA~1
\\\\IBM\\\\IBMINF~1\\\\11.50\\\\extend\\\\krakatoa\\\\krakatoa.jar;C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11
....50\\\\
extend\\\\krakatoa\\\\jdbc.jar;.;C:\\\\Program Files
(x86)\\\\Java\\\\jre6\\\\lib\\\\ext\\\\QTJava.zip
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DBTEMP=C:\\\\PROGRA~1\\\\IB
M\\\\IBMINF~1\\\\11.50\\\\infxtmp
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
CLIENT_LOCALE=EN_US.CP1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
DB_LOCALE=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
SERVER_LOCALE=EN_US.U
TF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set DBLANG=EN_US.UTF8
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>mode con codepage
select=
1252
Status for device CON:
----------------------
Lines: 300
Columns: 80
Keyboard rate: 31
Keyboard delay: 1
Code page: 1252
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>cd
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF
~1\\\\11.50
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>oninit -v
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>
here is the log (which changes when I try to start the service):
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>cat ol_duckrogers.log
18:47:23 IBM Informix Dynamic Server Started.
1) Reboot: did not change anything...
2) starts %informixserver% -iy opens a command prompt, nothing shows up and
it closes.
3) changed service configuration to Local System User and restarted service
via GUI: nothing.
4) starts %informixserver% -iy opens a command prompt, nothing shows up and
it closes (same as #2).
last log entries:
07:43:07 IBM Informix Dynamic Server Started.
07:43:07 Requested shared memory segment size rounded from 32656KB to
32704KB
07:52:13 IBM Informix Dynamic Server Started.
07:52:13 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:20 IBM Informix Dynamic Server Started.
07:56:20 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:33 IBM Informix Dynamic Server Started.
07:56:33 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:43 IBM Informix Dynamic Server Started.
07:56:43 Requested shared memory segment size rounded from 32656KB to
32704KB
07:58:12 IBM Informix Dynamic Server Started.
07:58:12 Requested shared memory segment size rounded from 32656KB to
32704KB
07:58:26 IBM Informix Dynamic Server Started.
07:58:26 Requested shared memory segment size rounded from 32656KB to
32704KB
BTW: oninit -v, -ivy always return:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
while being Informix user...
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 23:32
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14809]
I get the same group and privilege results, so not that...
Have you tried rebooting just in case the service control task hasn't
refreshed credentials? (this shouldn't be necesary)
Does the service start if you change it to log on as the local system user?
(if the service has never successfully started you would need to start it
with
-iy for the first time, e.g. starts %informixserver% -iy)
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 12:36:03 PM
Subject: RE: IDS FC3 on Windows Vista Business x64... [14807]
here is the result...
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>whoami /all
USER INFORMATION
----------------
User Name SID
=================== ==============================================
duckrogers\\\\informix S-1-5-21-1146109046-1584904098-1683932520-1008
GROUP INFORMATION
-----------------
Group Name Type SID
Attributes
====================================== ================
==============================================
==================================================
Everyone Well-known group S-1-1-0
Mandatory group, Enabled by default, Enabled group
DuckRogers\\\\Informix-Admin Alias
S-1-5-21-1146109046-1584904098-1683932520-1007 Mandatory group, Enabled by
default, Enabled group
BUILTIN\\\\Administrators Alias S-1-5-32-544
Group used for deny only
BUILTIN\\\\Users Alias S-1-5-32-545
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\INTERACTIVE Well-known group S-1-5-4
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\Authenticated Users Well-known group S-1-5-11
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\This Organization Well-known group S-1-5-15
Mandatory group, Enabled by default, Enabled group
LOCAL Well-known group S-1-2-0
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\NTLM Authentication Well-known group S-1-5-64-10
Mandatory group, Enabled by default, Enabled group
Mandatory Label\\\\Medium Mandatory Level Unknown SID type S-1-16-8192
Mandatory group, Enabled by default, Enabled group
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ==================================== ========
SeShutdownPrivilege Shut down the system Disabled
SeChangeNotifyPrivilege Bypass traverse checking Enabled
SeUndockPrivilege Remove computer from docking station Disabled
SeIncreaseWorkingSetPrivilege Increase a process working set Disabled
SeTimeZonePrivilege Change the time zone Disabled
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 21:21
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14806]
Hi Jean Georges,
If you type "whoami /all" from that prompt, does it say you are a member of
the Informix-Admin group?
If the answer is no, logoff and log back in again to refresh your token
information.
If the answer is yes, can you paste the "PRIVILEGES INFORMATION" here.
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 11:21:39 AM
Subject: IDS FC3 on Windows Vista Business x64... [14805]
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\Co
mmon Files\\\\Roxio Shared\\\\10.0\\\\DLLShared\\\\;C:\\\\Program Files
(x86)\\\\ThinkPad\\\\ConnectU
tilities\\\\;C:\\\\Program Files\\\\Common Files\\\\Lenovo;C:\\\\Program Files
(x86)\\\\Lenovo\\\\Cli
ent Security Solution;C:\\\\Program Files\\\\Lenovo\\\\Client Security
Solution;c:\\\\Progra
m Files (x86)\\\\Microsoft SQL Server\\\\90\\\\Tools\\\\binn\\\\;C:\\\\Program
Files\\\\Intel\\\\WiFi\\\\bi
n\\\\;C:\\\\Users\\\\Jean Georges\\\\Documents\\\\bin;c:\\\\cygwin\\\\bin;C:\\\\Program Files
(x86)\\\\Quic
kTime\\\\QTSystem\\\\;C:\\\\cygwin\\\\bin;C:\\\\VXIPN
Sending you a diagnostic utility called ntauth that simulates the
authorization calls. Let us know what it says.
> starts %informixserver% -iy opens a command prompt, nothing shows up and it
closes
and you're sure you didn't run "start" instead of "starts" by accident?
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Tuesday, February 10, 2009 1:40:24 PM
Subject: RE: IDS FC3 on Windows Vista Business x64... [14829]
1) Reboot: did not change anything...
2) starts %informixserver% -iy opens a command prompt, nothing shows up and
it closes.
3) changed service configuration to Local System User and restarted service
via GUI: nothing.
4) starts %informixserver% -iy opens a command prompt, nothing shows up and
it closes (same as #2).
last log entries:
07:43:07 IBM Informix Dynamic Server Started.
07:43:07 Requested shared memory segment size rounded from 32656KB to
32704KB
07:52:13 IBM Informix Dynamic Server Started.
07:52:13 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:20 IBM Informix Dynamic Server Started.
07:56:20 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:33 IBM Informix Dynamic Server Started.
07:56:33 Requested shared memory segment size rounded from 32656KB to
32704KB
07:56:43 IBM Informix Dynamic Server Started.
07:56:43 Requested shared memory segment size rounded from 32656KB to
32704KB
07:58:12 IBM Informix Dynamic Server Started.
07:58:12 Requested shared memory segment size rounded from 32656KB to
32704KB
07:58:26 IBM Informix Dynamic Server Started.
07:58:26 Requested shared memory segment size rounded from 32656KB to
32704KB
BTW: oninit -v, -ivy always return:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
while being Informix user...
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 23:32
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14809]
I get the same group and privilege results, so not that...
Have you tried rebooting just in case the service control task hasn't
refreshed credentials? (this shouldn't be necesary)
Does the service start if you change it to log on as the local system user?
(if the service has never successfully started you would need to start it
with
-iy for the first time, e.g. starts %informixserver% -iy)
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 12:36:03 PM
Subject: RE: IDS FC3 on Windows Vista Business x64... [14807]
here is the result...
C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50>whoami /all
USER INFORMATION
----------------
User Name SID
=================== ==============================================
duckrogers\\\\informix S-1-5-21-1146109046-1584904098-1683932520-1008
GROUP INFORMATION
-----------------
Group Name Type SID
Attributes
====================================== ================
==============================================
==================================================
Everyone Well-known group S-1-1-0
Mandatory group, Enabled by default, Enabled group
DuckRogers\\\\Informix-Admin Alias
S-1-5-21-1146109046-1584904098-1683932520-1007 Mandatory group, Enabled by
default, Enabled group
BUILTIN\\\\Administrators Alias S-1-5-32-544
Group used for deny only
BUILTIN\\\\Users Alias S-1-5-32-545
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\INTERACTIVE Well-known group S-1-5-4
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\Authenticated Users Well-known group S-1-5-11
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\This Organization Well-known group S-1-5-15
Mandatory group, Enabled by default, Enabled group
LOCAL Well-known group S-1-2-0
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\\\\NTLM Authentication Well-known group S-1-5-64-10
Mandatory group, Enabled by default, Enabled group
Mandatory Label\\\\Medium Mandatory Level Unknown SID type S-1-16-8192
Mandatory group, Enabled by default, Enabled group
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ==================================== ========
SeShutdownPrivilege Shut down the system Disabled
SeChangeNotifyPrivilege Bypass traverse checking Enabled
SeUndockPrivilege Remove computer from docking station Disabled
SeIncreaseWorkingSetPrivilege Increase a process working set Disabled
SeTimeZonePrivilege Change the time zone Disabled
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Guy .
Sent: Monday, February 09, 2009 21:21
To: ids@iiug.org
Subject: Re: IDS FC3 on Windows Vista Business x64... [14806]
Hi Jean Georges,
If you type "whoami /all" from that prompt, does it say you are a member of
the Informix-Admin group?
If the answer is no, logoff and log back in again to refresh your token
information.
If the answer is yes, can you paste the "PRIVILEGES INFORMATION" here.
Guy
________________________________
From: Jean Georges Perrin <jgp@jgp.net>
To: ids@iiug.org
Sent: Monday, February 9, 2009 11:21:39 AM
Subject: IDS FC3 on Windows Vista Business x64... [14805]
Hi,
I have some problems with my windows installation.
The installation went fine.
I installed all correctly. the service is set to be automatic startup.
nothing happens.
if I start a command prompt as Informix, I get:
Only members of IXDBSA group (Informix-Admin, by default) can start IBM
Informix Dynamic Server.
Of course, both me and the Informix user are part of the group.
here is the transcript:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\\\\Windows\\\\system32>whoami
duckrogers\\\\informix
C:\\\\Windows\\\\system32>cd "\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic
Server\\\\11.50"
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>ol_duckrogers.cmd
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXDIR=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
INFORMIXSERVER=ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
ONCONFIG=ONCONFIG.ol_duckrogers
C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50>set
PATH=C:\\\\PROGRA~1\\\\IBM\\\\IBMINF~1\\\\11.50\\\\bin;C:\\\\PVSW\\\\Bin;C:\\\\Windows\\\\system32;C:\\\\Windows;C:\\\\Windows\\\\Sys
tem3
2\\\\Wbem;C:\\\\Program Files (x86)\\\\ATI
Technologies\\\\ATI.ACE\\\\Core-Static;c:\\\\Program Fi
les (x86)\\\\Common Files\\\\Lenovo;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\1
0.0\\\\DLLShared\\\\;C:\\\\Program Files (x86)\\\\Common Files\\\\Roxio
Shared\\\\DLLShared\\\\;C:\\\\Pr
ogram Files (x86)\\\\Common Files\\\\Roxio Shared\\\\DLLShared\\\\;C:\\