Re: Installing IDS 7.3 on RH 6.0 (2)

Hi! First you can try changing the following lines in your onconfig file: > DBSERVERNAME proteus # Name of default database server > DBSERVERALIASES proteus # List of alternate dbservernames > NETTYPE # Configure poll thread(s) for nettype to > DBSERVERNAME proteus # Name of default database server > DBSERVERALIASES # List of alternate dbservernames > NETTYPE soctcp,,,NET # Configure poll thread(s) for nettype I have doubts it will help, but try. If this will not help, try to look at system calls performed by oninit using truss (well, I don't know exactly what command to use on Linux, but on SCO it's truss), like: truss -fa -t open,bind,listen,accept -v open,bind,listen,accept -o trace.log oninit -i If this wil not give you any clues, try removing the -t option to log all system calls. Best Regards, Octav On Wed, Jun 09, 1999 at 10:44:00AM +0200, Sebastian Paul Avarvarei wrote: > Hi! > > I made a big mistake in the precedent message. The error code was -25573 (see > the online.log below). I don't understand what's wrong. As far as I > can see, TCP/IP is working fine under my RH 6.0/2.2.9 (if someone can suggest some > other relevant tests beside ping, I would be grateful). > > I tried using different machine names in sqlhosts (home, home.proteus.ro, 127.0.0.1, > 172.30.1.1 and so on), but no luck. I can use the server only with ipcshm. > > See the sqlhosts, online.log and onconfig below. > > Thank you very much! > Sebastian Paul A. > E-mail: proteus@romus.com > > > -------------------------------------------------------------------------- > sqlhosts > -------------------------------------------------------------------------- > proteus onsoctcp machine.home.ro turbo > --------------------------------------------------------------------------> > -------------------------------------------------------------------------- > online.log > -------------------------------------------------------------------------- > Wed Jun 9 08:58:07 1999 > > 08:58:07 Event alarms enabled. ALARMPROG = '/usr/informix/etc/log_full.sh' > 08:58:13 DR: DRAUTO is 0 (Off) > 08:58:13 listener-thread: err = -25573: oserr = 11: errstr = : Network driver cannot accept a connection on the port. > System error = 11. > 08:58:13 Informix Dynamic Server Version 7.30.U Software Serial Number #It's illegal to let it here (I think:) > 08:58:13 listener-thread: err = -25573: oserr = 11: errstr = : Network driver cannot accept a connection on the port. > System error = 11. > 08:58:14 Informix Dynamic Server Initialized -- Shared Memory Initialized. > 08:58:14 Physical Recovery Started. > 08:58:14 Physical Recovery Complete: 0 Pages Restored. > 08:58:14 Logical Recovery Started. > 08:58:15 listener-thread: err = -25573: oserr = 11: errstr = : Network driver cannot accept a connection on the port. > System error = 11. > 08:58:17 Logical Recovery Complete.> 0 Committed, 0 Rolled Back, 0 Open, 0 Bad Locks > 08:58:17 Onconfig parameter MSGPATH modified from /dev/console to /opt/informix/online.log. > 08:58:17 Dataskip is now OFF for all dbspaces > 08:58:17 On-Line Mode > 08:58:17 Checkpoint Completed: duration was 0 seconds. > 08:58:18 listener-thread: err = -25573: oserr = 11: errstr = : Network driver cannot accept a connection on the port. > System error = 11. > 08:58:19 listener-thread: err = -25573: oserr = 11: errstr = : Network driver cannot accept a connection on the port. > System error = 11. > --------------------------------------------------------------------------> > > -------------------------------------------------------------------------- > onconfig > -------------------------------------------------------------------------- > #************************************************************************** > # > # INFORMIX SOFTWARE, INC. > # > # Title: onconfig.std > # Description: Informix Dynamic Server Configuration Parameters > # > #************************************************************************** > > # Root Dbspace Configuration > > ROOTNAME rootdbs # Root dbspace name> ROOTPATH /opt/dbspaces/root_dbs # Path for device containing root dbspace > ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) > ROOTSIZE 20000 # Size of root dbspace (Kbytes)> > # Disk Mirroring Configuration Parameters > > MIRROR 0 # Mirroring flag (Yes = 1, No = 0) > MIRRORPATH # Path for device containing mirrored root > MIRROROFFSET 0 # Offset into mirrored device (Kbytes)> > # Physical Log Configuration > > PHYSDBS rootdbs # Location (dbspace) of physical log > PHYSFILE 1000 # Physical log file size (Kbytes)> > # Logical Log Configuration > > LOGFILES 6 # Number of logical log files > LOGSIZE 500 # Logical log size (Kbytes)> > # Diagnostics > > MSGPATH /opt/informix/online.log # System message log file path > CONSOLE /dev/console # System console message path > ALARMPROGRAM /usr/informix/etc/log_full.sh # Alarm program path> SYSALARMPROGRAM /usr/informix/etc/evidence.sh # System Alarm program path > TBLSPACE_STATS 1> > # System Archive Tape Device > > TAPEDEV /dev/null # Tape device path > TAPEBLK 16 # Tape block size (Kbytes) > TAPESIZE 10240 # Maximum amount of data to put on tape (Kbytes)> > # Log Archive Tape Device > > LTAPEDEV /dev/null # Log tape device path > LTAPEBLK 16 # Log tape block size (Kbytes) > LTAPESIZE 10240 # Max amount of data to put on log tape (Kbytes)> > # Optical > > STAGEBLOB # Informix Dynamic Server/Optical staging area > > # System Configuration > > SERVERNUM 0 # Unique id corresponding to a Dynamic Server instance > DBSERVERNAME proteus # Name of default database server > DBSERVERALIASES proteus # List of alternate dbservernames > NETTYPE # Configure poll thread(s) for nettype > DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. > RESIDENT 0 # Forced residency flag (Yes = 1, No = 0) > > MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor > NUMCPUVPS 1 # Number of user (cpu) vps > SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one > > NOAGE 0 # Process aging > AFF_SPROC 0 # Affinity start processor > AFF_NPROCS 0 # Affinity number of processors> > # Shared Memory Parameters > > LOCKS 2000 # Maximum number of locks > BUFFERS 200 # Maximum number of shared buffers > NUMAIOVPS # Number of IO vps > PHYSBUFF 32 # Physical log buffer size (Kbytes) > LOGBUFF 32 # Logical log buffer size (Kbytes)> LOGSMAX 6 # Maximum number of logical log files > CLEANERS 1 # Number of buffer cleaner processes > SHMBASE 0x10000000L # Shared memory base address > SHMVIRTSIZE 8000 # initial virtual shared memory segment size > SHMADD 8192 # Size of new shared memory segments (Kbytes) > SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited > CKPTINTVL 300 # Check point interval (in sec) > LRUS 8 # Number of LRU queues > LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit > LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit > LTXHWM 50 # Long transaction hi