Oninit cdi / Archive
Talk to an expert →

RE: 4GL Tools Fail to Run

Posted in 2006

Topics: Backup & Restore, Installation, Setup & Upgrades, Connectivity: ODBC / JDBC / .NET, Connectivity: ESQL/C, 4GL & Embedded SQL, Server Administration, Security, Permissions & Auditing, Networking & sqlhosts Configuration, Platform-Specific Issues, Internationalization & Character Sets

Simmons, Keith — — source: Usenet: comp.databases.informix

Adelino Many thanks for this, it exactly describes the problem, and now i've seen it again I remember the flash !! :-) Now I need to find the way around it !! Keith -> -----Original Message----- -> From: adelino silva [mailto:adelino_j_silva@hotmail.com] -> Sent: Tuesday, June 06, 2006 5:29 PM -> To: keith.simmons@office2office.biz -> Subject: Re: 4GL Tools Fail to Run -> -> -> Hi Simmons, -> -> See the Flash (Alert). -> -> Applying Technology Level package 5300-04 causes Informix 4GL and SQL -> products to fail. -> http://www-1.ibm.com/support/docview.wss?rs=1004&context=SSGU 8G&context=SSVT2J&context=SSGHZP&context=SSGU5Y&c-> ontext=SSGKNY&context=SSGU5D&context=SSCRW7&dc=D600&uid=swg21 -> 231022&loc=en_US&cs=utf-8&lang=en -> -> Simmons, Keith escreveu: -> > All -> > -> > R4gl/I4gl/ISQL Version 7.32.FC3 running on AIX 5.3 against IDS -> 9.40.FC6. -> > I have the above environment running fine on a P570, am trying to -> duplicate -> > the environment on a P55Q and I am encountering problems. -> > The P55Q is a clear build and I built the IDS environment -> from a tar -> of the -> > P570 environment. A few config changes, sqlhosts changes -> and services -> > changes later I was able to restore an ontape archive -> from the P570 with -> > no issues and can connect fine from dbaccess, from ODBC -> connections -> and from -> > another third party application. -> > I tried to recreate the tools environment (r4gl, i4gl, -> isql and id) -> using the -> > same method of tar -c, ftp and tar -x but get the error:- -> > exec(): 0509-036 Cannot load program fglgo because of the -> following -> errors: -> > or similar depending on the program, there are no -> following errors !! -> > Trussing the program gives the following details:- -> > -> > execve("/usr/IDSTOOLS/bin/r4gl", 0x2FF228F4, 0x2FF228FC) argc: -> 1 -> > execve("/usr/sbin/execerror", 0x0FFFFFFFFFFFF5B0, -> 0x0FFFFFFFFFFFF790) argc: 2 -> > _wlm_getclassname(0, 0x2FF22C1A, 804397336) = -> 805519568 -> > _ewlm_classify_correlator(0x2FF21A50, 0x00000007, 0x00000010, -> 0x0000D0B2, 0x00000000, 0x00000135, 0x00000000, 0x00000000) = -> 0x00000000 -> > _wlm_getclassname(0, 0x2FF22EF9, 805310140) = -> 805519568 -> > _wlm_get_info(0x00000000, 65552, 0x00000010, 0) = -> 805519568 -> > _addcpucosts(0x00000004, 0x30013850, 0x00000000, 0x00000000, -> 0x00000000, 0x00000000, 0x00000000, 0x00000000) = -> 0x000003E8 -> > _addcpucosts(0x00000002, 0x00000000, 0x2FF22FFC, 0x0000D0B2, -> 0x00000000, 0x00000116, 0x00000000, 0x00000000) = -> 0x000003E8 -> > _addcpucosts(0x00000001, 0x00000000, 0x2FF22FFC, 0x0000D0B2, -> 0x00000000, 0x0000011C, 0x00000000, 0x00000000) = -> 0x000003E8 -> > _checkpnt_fail(0x00000004) = -> 500 -> > _checkpnt_fail(0x00000002) = -> 500 -> > _checkpnt_fail(0x00000001) = -> 500 -> > auditbin(16777344, 804380656, 16000, 804396944) = -803581648 -> > . -> > . -> > . -> > lchown("/usr/lib/nls/msg/en_US/execerr.cat", 804397952, -> 805525610) = -> 164316 -> > umask(805525576) = -> 3 -> > open("", O_RDONLY|O_RSHARE|O_NOCTTY|O_DELAY) Err#25 -> ENOTTY -> > kgetsidx(3) = -> 0 -> > open("", O_RDONLY|O_RSHARE|O_NOCTTY|O_DELAY) Err#25 -> ENOTTY -> > _thread_self() = -> 4096 -> > schedtune(0x00000003, 0x00000000, 0x00000001, 0x0000D0B2, -> 0x00000000, -> 0x00000125, 0x00000000, 0x00000000) = -> 0x00001000 -> > schedtune(0x00000003, 0x00000000, 0x00000001, 0x30004878, -> 0x30036898, -> 0x3835392D, 0x31000000, 0x00000000) = -> 0x00001000 -> > schedtune(0x00000003, 0x00000000, 0x00000001, 0x00000000, -> 0x00000000, -> 0x00000000, 0x00000000, 0x00000000) = -> 0x00001000 -> > lchown("", 805388892, 0) = -> 164316 -> > schedtune(0x00000003, 0x00000000, 0x00000001, 0x00000000, -> 0x00000000, -> 0x00000000, 0x00000000, 0x00000000) = -> 0x00001000 -> > exec(): 0509-036 Cannot load program -> _getpgrpx(2) = -> 37 -> > r4gl_getpgrpx(2) = -> 4 -> > because of the following -> errors: -> > _getpgrpx(2) = -> 34 -> > kgetsidx(1) = -> 67108865 -> > kgetsidx(2) = -> 67108865 -> > *** process killed *** -> > -> > I've tried installing from scratch and get the same errors. -> > Anyone got any idea what is happening, why and how I can resolve -> > the issue?? -> > -> > Keith Simmons -> > -> > -> ************************************************************* -> ********************************** -> > This message is sent in strict confidence for the -> addressee only. It -> may contain legally privileged information. The contents -> are not to be -> disclosed to anyone other than the addressee. Unauthorised -> recipients -> are requested to preserve this confidentiality and to advise -> the sender -> immediately of any error in transmission. -> > -> > This footnote also confirms that this email message has been swept -> for the presence of computer viruses, however we cannot -> guarantee that -> this message is free from such problems. -> > -> ************************************************************* -> ********************************** -> -> _________________________________________________________________ -> MSN Busca: fácil, rápido, direto ao ponto. http://search.msn.com.br ->

↪ replying to Simmons, Keith
scottishpoet — — source: Usenet: comp.databases.informix

http://www.ibm.com/support/docview.wss?rs=681&context=SSVT2J&dc=D600&uid=swg21231022&loc=en_US&cs=UTF-8&lang=en Apparantly Installing the official e-fix for AIX APAR IY83580 resolves the problem. The above should probably be updated to reflect this. links to IBM AIX fixes http://www.ibm.com/servers/eserver/support/unixservers/aixfixes.html

Glossary