Re: Online 7.12 Tunning
How many CPU's does the system have?
Is is a dedicated server; or does the app run on the same machine?
From your NETTYPE settings I'd guess decicated server. If you
need no network access them remove the onsoctcp NETTYPE setting.
You proably want to set OPTCOMPIND=0. This can be a biggee.
Check your release notes for setting of RESIDENT. If possible set to
1.
Your BUFFERS setting is a source of tuning. Run onstat -p after you
run your application and make sure the hit rates are > 95% read
and >85% write. If not increase the BUFFERS.
Also check you online log file after running. If you see it adding
virtual memory segments you might want to increase the SHVIRTSIZE
setting.
-Bill
}
}
} Hello,
}
} I've just upgraded from Online 5 to Online 7.12, on a RISC6000 with
} 128MB RAM, and I'm having some performance problems.
} The database is about 400MB and I have 32 users running an MRP application.
} Can someone give me some hints on this?
}
} Thanks in advance.
}
} This is my onconfig file:
}
}
} #**************************************************************************
} #
} # INFORMIX SOFTWARE, INC.
} #
} # Title: onconfig.std
} # Description: INFORMIX-OnLine Configuration Parameters
} #
} #**************************************************************************
}
} # Root Dbspace Configuration
}
} ROOTNAME rlv02 # Root dbspace name
} ROOTPATH /dev/rlv02 # Path for device containing root dbspace
} ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
} ROOTSIZE 122880 # Size of root dbspace (Kbytes)
}
} # Disk Mirroring Configuration Parameters
}
} MIRROR 0 # Mirroring flag (Yes = 1, No = 0)
} MIRRORPATH # Path for device containing mirrored root
} MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
}
} # Physical Log Configuration
}
} PHYSDBS rlv02 # Location (dbspace) of physical log
} PHYSFILE 10240 # Physical log file size (Kbytes)
}
} # Logical Log Configuration
}
} LOGFILES 12 # Number of logical log files
} LOGSIZE 5120 # Logical log size (Kbytes)
}
} # Diagnostics
}
} MSGPATH /online7/online.log # System message log file path
} CONSOLE /dev/console # System console message path
} ALARMPROGRAM # Alarm program path
}
} # System Archive Tape Device
}
} TAPEDEV /dev/rmt0 # Tape device path
} TAPEBLK 512 # Tape block size (Kbytes)
} TAPESIZE 1227776 # Maximum amount of data to put on tape (Kbytes)
}
} # Log Archive Tape Device
}
} LTAPEDEV /dev/null # Log tape device path
} LTAPEBLK 16 # Log tape block size (Kbytes)
} LTAPESIZE 10240 # Max amount of data to put on log tape (Kbytes)
}
} # Optical
}
} STAGEBLOB # INFORMIX-OnLine/Optical staging area
}
} # System Configuration
}
} SERVERNUM 0 # Unique id corresponding to a OnLine instance
} DBSERVERNAME dpx20 # Name of default database server
} DBSERVERALIASES dpx20_ip # List of alternate dbservernames
} DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env.
} RESIDENT 0 # Forced residency flag (Yes = 1, No = 0)
}
} MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor
} NUMCPUVPS 1 # Number of user (cpu) vps
} SINGLE_CPU_VP 1 # If non-zero, limit number of cpu vps to one
}
} NOAGE 1 # Process aging
} AFF_SPROC 0 # Affinity start processor
} AFF_NPROCS 0 # Affinity number of processors
}
} # Shared Memory Parameters
}
} LOCKS 60000 # Maximum number of locks
} BUFFERS 7200 # Maximum number of shared buffers
} NUMAIOVPS 1 # Number of IO vps
} PHYSBUFF 64 # Physical log buffer size (Kbytes)
} LOGBUFF 64 # Logical log buffer size (Kbytes)
} LOGSMAX 12 # Maximum number of logical log files
} CLEANERS 3 # Number of buffer cleaner processes
} SHMBASE 0x30000000 # Shared memory base address
} SHMVIRTSIZE 16000 # initial virtual shared memory segment size
} SHMADD 8192 # Size of new shared memory segments (Kbytes)
} SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited
} CKPTINTVL 300 # Check point interval (in sec)
} LRUS 8 # Number of LRU queues
} LRU_MAX_DIRTY 10 # LRU percent dirty begin cleaning limit
} LRU_MIN_DIRTY 20 # LRU percent dirty end cleaning limit
} LTXHWM 50 # Long transaction high water mark percentage
} LTXEHWM 60 # Long transaction high water mark (exclusive)
} TXTIMEOUT 0x12c # Transaction timeout (in sec)
} STACKSIZE 32 # Stack size (Kbytes)
}
} # System Page Size
} # BUFFSIZE - OnLine no longer supports this configuration parameter.
} # To determine the page size used by OnLine on your platform
} # see the last line of output from the command, 'onstat -b'.
}
}
} # Recovery Variables
} # OFF_RECVRY_THREADS:
} # Number of parallel worker threads during fast recovery or an offline restore.
} # ON_RECVRY_THREADS:
} # Number of parallel worker threads during an online restore.
}
} OFF_RECVRY_THREADS 10 # Default number of offline worker threads
} ON_RECVRY_THREADS 1 # Default number of online worker threads
}
} # Data Replication Variables
} # DRAUTO: 0 manual, 1 retain type, 2 reverse type
} DRAUTO 0 # DR automatic switchover
} DRINTERVAL 30 # DR max time between DR buffer flushes (in sec)
} DRTIMEOUT 30 # DR network timeout (in sec)
} DRLOSTFOUND /online7/etc/dr.lostfound # DR lost+found file path
}
} # Read Ahead Variables
} RA_PAGES 5 # Number of pages to attempt to read ahead
} RA_THRESHOLD 4 # Number of pages left before next group
}
} # DBSPACETEMP:
} # OnLine equivalent of DBTEMP for SE. This is the list of dbspaces
} # that the OnLine SQL Engine will use to create temp tables etc.
} # If specified it must be a colon separated list of dbspaces that exist
} # when the OnLine system is brought online. If not specified, or if
} # all dbspaces specified are invalid, various ad hoc queries will create
} # temporary files in /tmp instead.
}
} DBSPACETEMP dbstemp # Default temp dbspaces
}
} # DUMP*:
} # The following parameters control the type of diagnostics information which
} # is preserved when an unanticipated error condition (assertion failure) occurs
} # during OnLine operations.
} # For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No.
}
} DUMPDIR /tm