"ontape -p" segmentation fault
We recently upgraded to IDS9.40UC6. Sometimes "ontape -p" fails with
segmentation fault.
OS: SunOS osun9071 5.8 Generic_117350-21 sun4u sparc SUNW,Ultra-80
IDS: 9.40UC6
"dbx" produced the following output:
$ dbx $INFORMIXDIR/bin/ontape
.............
(dbx) run -p
...............
................
Continue restore? (y/n)yDo you want to back up the logs? (y/n)n
signal SEGV (no mapping at the fault address) in shm_srv_status at
0x8987c
0x0008987c: shm_srv_status+0x007c: ldsh [%g2 + 0x5c0], %g2
(dbx) where
=>[1] shm_srv_status(0xffbef24c, 0x38, 0xff0cf100, 0x0, 0x21e54,
0xff0cf24c), at 0x8987c
[2] get_srv_status(0xffbef24c, 0x0, 0x0, 0x0, 0x2, 0x826dc), at
0x80a00
[3] connect_for_restore(0x739e, 0x25a308, 0x2, 0x78, 0x21800,
0x1523560), at 0x826c4
[4] do_cold_write(0x0, 0x1e4298, 0x1, 0x25a444, 0x15e1c50, 0x1010),
at 0x82448
[5] sql_phys_write_restore(0x15239a4, 0xffbef594, 0x25a3f8,
0xffbef590, 0x1523560, 0x15ebac8), at
0x81e7c
[6] do_cold_phys_restore(0x259e74, 0x1000, 0x1e3810, 0x0, 0x1e3858,
0x1), at 0x6972c
[7] main(0x1c9c24, 0x25a2b0, 0x1, 0x1e2400, 0x15e1c30, 0x0), at
0x63368
(dbx)
Any ideas as to the cause/work-around?
Thanks in advance,
Carl Wu