C UDR - AIX

Hi , IFX 11.50 FC9X6 , AIX 6.1 I'm trying create a simple UDR to get the current 'transaction id' with less overhead possible... To use this UDR inside of SPL + Trigger... I'm not expert on C language, where play with it sometimes... So , I getting some trouble to compile the .c file, what I not sure if is some problem with gcc for AIX or the command line used... I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' ... and following the John Miller IIUG/2010 presentation 'The Basics of Writing and Utilizing C-User Define Routines'... If anyone have any tips how solve this, I appreciate a lot... =========================================== $ cat get_transid.c #include "incl/public/mi.h" #include "incl/public/milib.h" mi_integer get_transid(void){ mi_integer transid ; transid = mi_get_transaction_id() ; return transid ; } $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c $ l get* -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.ocollect2: get_transid.so: cannot open as COFF file $ gcc --version gcc (GCC) 4.2.0Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ ld --versionGNU find version 4.1 =========================================== I'm already try some differ approach on "-g" parameter (-gxcoff , gxcoff+) without success. Anyone? Regards Cesar

I believe you need to specify the format (64bits COFF) on the compilation line. I had to do more or less what you're trying to do recently but I think I made it on a trial/error basis... I'd need to check some notes.... I'll reply again if I'm able to find it... Regards. P.S.: Getting the tx id?! Why? On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins < cesar_inacio_martins@yahoo.com.br> wrote: > Hi , > > IFX 11.50 FC9X6 , AIX 6.1 > > I'm trying create a simple UDR to get the current 'transaction id' with > less overhead possible... > To use this UDR inside of SPL + Trigger... > > I'm not expert on C language, where play with it sometimes... > So , I getting some trouble to compile the .c file, what I not sure if > is some problem with gcc for AIX or the command line used... > I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' > > .... and following the John Miller IIUG/2010 presentation 'The Basics of > Writing and Utilizing C-User Define Routines'... > > If anyone have any tips how solve this, I appreciate a lot... > > =========================================== > $ cat get_transid.c > #include "incl/public/mi.h" > #include "incl/public/milib.h"> > mi_integer get_transid(void){ > > mi_integer transid ; > > transid = mi_get_transaction_id() ; > > return transid ; > } > > $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c > $ l get* > -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c > -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o> > $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o> collect2: get_transid.so: cannot open as COFF file > > $ gcc --version > gcc (GCC) 4.2.0> Copyright (C) 2007 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > $ ld --version> GNU find version 4.1 > > =========================================== > > I'm already try some differ approach on "-g" parameter (-gxcoff , > gxcoff+) without success. > > Anyone? > Regards > Cesar > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > -- Fernando Nunes Portugal http://informix-technology.blogspot.com My email works... but I don't check it frequently... --20cf306f7710462d3704b433d817

IB the compile line is missing the "-m64" option. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer, Advanced DataTools, the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Fri, Dec 16, 2011 at 6:24 AM, Fernando Nunes <domusonline@gmail.com>wrote: > I believe you need to specify the format (64bits COFF) on the compilation > line. I had to do more or less what you're trying to do recently but I > think I made it on a trial/error basis... I'd need to check some notes.... > I'll reply again if I'm able to find it... > > Regards. > > P.S.: Getting the tx id?! Why? > > On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins < > cesar_inacio_martins@yahoo.com.br> wrote: > > > Hi , > > > > IFX 11.50 FC9X6 , AIX 6.1 > > > > I'm trying create a simple UDR to get the current 'transaction id' with > > less overhead possible... > > To use this UDR inside of SPL + Trigger... > > > > I'm not expert on C language, where play with it sometimes... > > So , I getting some trouble to compile the .c file, what I not sure if > > is some problem with gcc for AIX or the command line used... > > I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' > > > > .... and following the John Miller IIUG/2010 presentation 'The Basics of > > Writing and Utilizing C-User Define Routines'... > > > > If anyone have any tips how solve this, I appreciate a lot... > > > > =========================================== > > $ cat get_transid.c > > #include "incl/public/mi.h" > > #include "incl/public/milib.h"> > > > mi_integer get_transid(void){ > > > > mi_integer transid ; > > > > transid = mi_get_transaction_id() ; > > > > return transid ; > > } > > > > $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c > > $ l get* > > -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c > > -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o> > > > $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o> > collect2: get_transid.so: cannot open as COFF file > > > > $ gcc --version > > gcc (GCC) 4.2.0> > Copyright (C) 2007 Free Software Foundation, Inc. > > This is free software; see the source for copying conditions. There is NO > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > PURPOSE. > > > > $ ld --version> > GNU find version 4.1 > > > > =========================================== > > > > I'm already try some differ approach on "-g" parameter (-gxcoff , > > gxcoff+) without success. > > > > Anyone? > > Regards > > Cesar > > > > > > > > > > ******************************************************************************* > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > -- > Fernando Nunes > Portugal > > http://informix-technology.blogspot.com > My email works... but I don't check it frequently... > > --20cf306f7710462d3704b433d817 > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --f46d0447a25f9884f404b433e081

Thanks Fernando, I will try some options here too. The reason to get the transaction id , is only for debugging propose. Try understand what wrong is happen into some batch process, for that we need separate the information by the transactions occurred (the process execute a lot of small transactions). On 16/12/2011 09:24, Fernando Nunes wrote: > I believe you need to specify the format (64bits COFF) on the compilation > line. I had to do more or less what you're trying to do recently but I > think I made it on a trial/error basis... I'd need to check some notes.... > I'll reply again if I'm able to find it... > > Regards. > > P.S.: Getting the tx id?! Why? > > On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< > cesar_inacio_martins@yahoo.com.br> wrote: > >> Hi , >> >> IFX 11.50 FC9X6 , AIX 6.1 >> >> I'm trying create a simple UDR to get the current 'transaction id' with >> less overhead possible... >> To use this UDR inside of SPL + Trigger... >> >> I'm not expert on C language, where play with it sometimes... >> So , I getting some trouble to compile the .c file, what I not sure if >> is some problem with gcc for AIX or the command line used... >> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' >> >> .... and following the John Miller IIUG/2010 presentation 'The Basics of >> Writing and Utilizing C-User Define Routines'... >> >> If anyone have any tips how solve this, I appreciate a lot... >> >> =========================================== >> $ cat get_transid.c >> #include "incl/public/mi.h" >> #include "incl/public/milib.h">> >> mi_integer get_transid(void){ >> >> mi_integer transid ; >> >> transid = mi_get_transaction_id() ; >> >> return transid ; >> } >> >> $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c >> $ l get* >> -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c >> -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o>> >> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o>> collect2: get_transid.so: cannot open as COFF file >> >> $ gcc --version >> gcc (GCC) 4.2.0>> Copyright (C) 2007 Free Software Foundation, Inc. >> This is free software; see the source for copying conditions. There is NO >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >> >> $ ld --version>> GNU find version 4.1 >> >> =========================================== >> >> I'm already try some differ approach on "-g" parameter (-gxcoff , >> gxcoff+) without success. >> >> Anyone? >> Regards >> Cesar >> >> >> >> > ******************************************************************************* >> Forum Note: Use "Reply" to post a response in the discussion forum. >> >>

You should be able to get it from sysmaster... not sure what will have better performance... Look at Art's suggestion... I believe it's something like that... Regards On Fri, Dec 16, 2011 at 11:41 AM, Cesar Inacio Martins < cesar_inacio_martins@yahoo.com.br> wrote: > Thanks Fernando, I will try some options here too. > > The reason to get the transaction id , is only for debugging propose. > Try understand what wrong is happen into some batch process, for that we > need separate the information by the transactions occurred (the process > execute a lot of small transactions). > > On 16/12/2011 09:24, Fernando Nunes wrote: > > I believe you need to specify the format (64bits COFF) on the compilation > > line. I had to do more or less what you're trying to do recently but I > > think I made it on a trial/error basis... I'd need to check some > notes.... > > I'll reply again if I'm able to find it... > > > > Regards. > > > > P.S.: Getting the tx id?! Why? > > > > On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< > > cesar_inacio_martins@yahoo.com.br> wrote: > > > >> Hi , > >> > >> IFX 11.50 FC9X6 , AIX 6.1 > >> > >> I'm trying create a simple UDR to get the current 'transaction id' with > >> less overhead possible... > >> To use this UDR inside of SPL + Trigger... > >> > >> I'm not expert on C language, where play with it sometimes... > >> So , I getting some trouble to compile the .c file, what I not sure if > >> is some problem with gcc for AIX or the command line used... > >> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' > >> > >> .... and following the John Miller IIUG/2010 presentation 'The Basics of > >> Writing and Utilizing C-User Define Routines'... > >> > >> If anyone have any tips how solve this, I appreciate a lot... > >> > >> =========================================== > >> $ cat get_transid.c > >> #include "incl/public/mi.h" > >> #include "incl/public/milib.h"> >> > >> mi_integer get_transid(void){ > >> > >> mi_integer transid ; > >> > >> transid = mi_get_transaction_id() ; > >> > >> return transid ; > >> } > >> > >> $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c > >> $ l get* > >> -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c > >> -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o> >> > >> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o> >> collect2: get_transid.so: cannot open as COFF file > >> > >> $ gcc --version > >> gcc (GCC) 4.2.0> >> Copyright (C) 2007 Free Software Foundation, Inc. > >> This is free software; see the source for copying conditions. There is > NO > >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > PURPOSE. > >> > >> $ ld --version> >> GNU find version 4.1 > >> > >> =========================================== > >> > >> I'm already try some differ approach on "-g" parameter (-gxcoff , > >> gxcoff+) without success. > >> > >> Anyone? > >> Regards > >> Cesar > >> > >> > >> > >> > > > > ******************************************************************************* > >> Forum Note: Use "Reply" to post a response in the discussion forum. > >> > >> > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > -- Fernando Nunes Portugal http://informix-technology.blogspot.com My email works... but I don't check it frequently... --20cf3074b1b41b8dc804b43426bb

Hi Art, I tried it on both commands (the executable and the lib..) and not work ... $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.ocollect2: get_transid.so: cannot open as COFF file Other try... $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.ccc1: error: unrecognized command line option "-m64" I already try with -maix64 ... without success.. On 16/12/2011 09:26, Art Kagel wrote: > IB the compile line is missing the "-m64" option. > > Art > > Art S. Kagel > Advanced DataTools (www.advancedatatools.com) > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > other organization with which I am associated either explicitly, > implicitly, or by inference. Neither do those opinions reflect those of > other individuals affiliated with any entity with which I am affiliated nor > those of the entities themselves. > > On Fri, Dec 16, 2011 at 6:24 AM, Fernando Nunes<domusonline@gmail.com>wrote: > >> I believe you need to specify the format (64bits COFF) on the compilation >> line. I had to do more or less what you're trying to do recently but I >> think I made it on a trial/error basis... I'd need to check some notes.... >> I'll reply again if I'm able to find it... >> >> Regards. >> >> P.S.: Getting the tx id?! Why? >> >> On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< >> cesar_inacio_martins@yahoo.com.br> wrote: >> >>> Hi , >>> >>> IFX 11.50 FC9X6 , AIX 6.1 >>> >>> I'm trying create a simple UDR to get the current 'transaction id' with >>> less overhead possible... >>> To use this UDR inside of SPL + Trigger... >>> >>> I'm not expert on C language, where play with it sometimes... >>> So , I getting some trouble to compile the .c file, what I not sure if >>> is some problem with gcc for AIX or the command line used... >>> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' >>> >>> .... and following the John Miller IIUG/2010 presentation 'The Basics of >>> Writing and Utilizing C-User Define Routines'... >>> >>> If anyone have any tips how solve this, I appreciate a lot... >>> >>> =========================================== >>> $ cat get_transid.c >>> #include "incl/public/mi.h" >>> #include "incl/public/milib.h">>> >>> mi_integer get_transid(void){ >>> >>> mi_integer transid ; >>> >>> transid = mi_get_transaction_id() ; >>> >>> return transid ; >>> } >>> >>> $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c >>> $ l get* >>> -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c >>> -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o>>> >>> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o>>> collect2: get_transid.so: cannot open as COFF file >>> >>> $ gcc --version >>> gcc (GCC) 4.2.0>>> Copyright (C) 2007 Free Software Foundation, Inc. >>> This is free software; see the source for copying conditions. There is NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >> PURPOSE. >>> $ ld --version>>> GNU find version 4.1 >>> >>> =========================================== >>> >>> I'm already try some differ approach on "-g" parameter (-gxcoff , >>> gxcoff+) without success. >>> >>> Anyone? >>> Regards >>> Cesar >>> >>> >>> >>> >> > ******************************************************************************* >>> Forum Note: Use "Reply" to post a response in the discussion forum. >>> >>> >> -- >> Fernando Nunes >> Portugal >> >> http://informix-technology.blogspot.com >> My email works... but I don't check it frequently... >> >> --20cf306f7710462d3704b433d817 >> >> >> >> > ******************************************************************************* >> Forum Note: Use "Reply" to post a response in the discussion forum. >> >> > --f46d0447a25f9884f404b433e081 > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >

Complementing... Show as 32-bit XCOFF ========================================= $ gcc -Wall -fPIC -I/vulca/informix -c get_transid.c $ dump -ov get_transid.o get_transid.o: ***Object Module Header*** # Sections Symbol Ptr # Symbols Opt Hdr Len Flags 2 0x0000019e 22 0 0x0000 Flags=( DEP_SYSTEM ) Timestamp = "Dec 16 08:58:00 2011" Magic = 0x1df (32-bit XCOFF) ========================================= Now is 64-bit XCOFF .... still no working... ========================================= $ gcc -maix64 -Wall -fPIC -I/vulca/informix -c get_transid.c $ dump -ov get_transid.o get_transid.o:dump: get_transid.o: 0654-108 file is not valid in the current object file mode. Use the -X option to specify the desired object mode. $ dump -ovX64 get_transid.o get_transid.o: ***Object Module Header*** # Sections Symbol Ptr # Symbols Opt Hdr Len Flags 2 0x00000168 16 0 0x0000 Flags=( DEP_SYSTEM ) Timestamp = "Dec 16 08:58:42 2011" Magic = 0x1f7 (64-bit XCOFF) $ gcc -maix64 -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.ocollect2: get_transid.so: cannot open as COFF file $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.ocollect2: get_transid.so: cannot open as COFF file ========================================= On 16/12/2011 09:47, Cesar Inacio Martins wrote: > Hi Art, > > I tried it on both commands (the executable and the lib..) and not > work ... > > $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so > get_transid.o> collect2: get_transid.so: cannot open as COFF file > > > Other try... > > $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.c> cc1: error: unrecognized command line option "-m64" > > > I already try with -maix64 ... without success.. > > > > On 16/12/2011 09:26, Art Kagel wrote: >> IB the compile line is missing the "-m64" option. >> >> Art >> >> Art S. Kagel >> Advanced DataTools (www.advancedatatools.com) >> Blog:http://informix-myview.blogspot.com/ >> >> Disclaimer: Please keep in mind that my own opinions are my own opinions >> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any >> other organization with which I am associated either explicitly, >> implicitly, or by inference. Neither do those opinions reflect those of >> other individuals affiliated with any entity with which I am affiliated nor >> those of the entities themselves. >> >> On Fri, Dec 16, 2011 at 6:24 AM, Fernando Nunes<domusonline@gmail.com>wrote: >> >>> I believe you need to specify the format (64bits COFF) on the compilation >>> line. I had to do more or less what you're trying to do recently but I >>> think I made it on a trial/error basis... I'd need to check some notes.... >>> I'll reply again if I'm able to find it... >>> >>> Regards. >>> >>> P.S.: Getting the tx id?! Why? >>> >>> On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< >>> cesar_inacio_martins@yahoo.com.br> wrote: >>> >>>> Hi , >>>> >>>> IFX 11.50 FC9X6 , AIX 6.1 >>>> >>>> I'm trying create a simple UDR to get the current 'transaction id' with >>>> less overhead possible... >>>> To use this UDR inside of SPL + Trigger... >>>> >>>> I'm not expert on C language, where play with it sometimes... >>>> So , I getting some trouble to compile the .c file, what I not sure if >>>> is some problem with gcc for AIX or the command line used... >>>> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF file' >>>> >>>> .... and following the John Miller IIUG/2010 presentation 'The Basics of >>>> Writing and Utilizing C-User Define Routines'... >>>> >>>> If anyone have any tips how solve this, I appreciate a lot... >>>> >>>> =========================================== >>>> $ cat get_transid.c >>>> #include "incl/public/mi.h" >>>> #include "incl/public/milib.h">>>> >>>> mi_integer get_transid(void){ >>>> >>>> mi_integer transid ; >>>> >>>> transid = mi_get_transaction_id() ; >>>> >>>> return transid ; >>>> } >>>> >>>> $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c >>>> $ l get* >>>> -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c >>>> -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o>>>> >>>> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o>>>> collect2: get_transid.so: cannot open as COFF file >>>> >>>> $ gcc --version >>>> gcc (GCC) 4.2.0>>>> Copyright (C) 2007 Free Software Foundation, Inc. >>>> This is free software; see the source for copying conditions. There is NO >>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>> PURPOSE. >>>> $ ld --version>>>> GNU find version 4.1 >>>> >>>> =========================================== >>>> >>>> I'm already try some differ approach on "-g" parameter (-gxcoff , >>>> gxcoff+) without success. >>>> >>>> Anyone? >>>> Regards >>>> Cesar >>>> >>>> >>>> >>>> >> ******************************************************************************* >>>> Forum Note: Use "Reply" to post a response in the discussion forum. >>>> >>>> >>> -- >>> Fernando Nunes >>> Portugal >>> >>> http://informix-technology.blogspot.com >>> My email works... but I don't check it frequently... >>> >>> --20cf306f7710462d3704b433d817 >>> >>> >>> >>> >> ******************************************************************************* >>> Forum Note: Use "Reply" to post a response in the discussion forum. >>> >>> >> --f46d0447a25f9884f404b433e081 >> >> >> ******************************************************************************* >> Forum Note: Use "Reply" to post a response in the discussion forum. >>

Try the link step without the "-Wl,-soname,get_transid.so" option. Just a hunch. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer, Advanced DataTools, the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Fri, Dec 16, 2011 at 7:03 AM, Cesar Inacio Martins < cesar_inacio_martins@yahoo.com.br> wrote: > Complementing... > > Show as 32-bit XCOFF > ========================================= > $ gcc -Wall -fPIC -I/vulca/informix -c get_transid.c > $ dump -ov get_transid.o> > get_transid.o: > > ***Object Module Header*** > # Sections Symbol Ptr # Symbols Opt Hdr Len Flags > > 2 0x0000019e 22 0 0x0000 > Flags=( DEP_SYSTEM ) > Timestamp = "Dec 16 08:58:00 2011" > Magic = 0x1df (32-bit XCOFF) > > ========================================= > > Now is 64-bit XCOFF .... still no working... > > ========================================= > $ gcc -maix64 -Wall -fPIC -I/vulca/informix -c get_transid.c > $ dump -ov get_transid.o > get_transid.o:> dump: get_transid.o: 0654-108 file is not valid in the current object > file mode. > > Use the -X option to specify the desired object mode. > $ dump -ovX64 get_transid.o> > get_transid.o: > > ***Object Module Header*** > # Sections Symbol Ptr # Symbols Opt Hdr Len Flags > > 2 0x00000168 16 0 0x0000 > Flags=( DEP_SYSTEM ) > Timestamp = "Dec 16 08:58:42 2011" > Magic = 0x1f7 (64-bit XCOFF) > > $ gcc -maix64 -shared -Wl,-soname,get_transid.so -o get_transid.so > get_transid.o> collect2: get_transid.so: cannot open as COFF file > $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o> collect2: get_transid.so: cannot open as COFF file > ========================================= > > On 16/12/2011 09:47, Cesar Inacio Martins wrote: > > Hi Art, > > > > I tried it on both commands (the executable and the lib..) and not > > work ... > > > > $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so > > get_transid.o> > collect2: get_transid.so: cannot open as COFF file > > > > > > Other try... > > > > $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.c> > cc1: error: unrecognized command line option "-m64" > > > > > > I already try with -maix64 ... without success.. > > > > > > > > On 16/12/2011 09:26, Art Kagel wrote: > >> IB the compile line is missing the "-m64" option. > >> > >> Art > >> > >> Art S. Kagel > >> Advanced DataTools (www.advancedatatools.com) > >> Blog:http://informix-myview.blogspot.com/ > >> > >> Disclaimer: Please keep in mind that my own opinions are my own opinions > >> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > >> other organization with which I am associated either explicitly, > >> implicitly, or by inference. Neither do those opinions reflect those of > >> other individuals affiliated with any entity with which I am affiliated > nor > >> those of the entities themselves. > >> > >> On Fri, Dec 16, 2011 at 6:24 AM, Fernando > Nunes<domusonline@gmail.com>wrote: > >> > >>> I believe you need to specify the format (64bits COFF) on the > compilation > >>> line. I had to do more or less what you're trying to do recently but I > >>> think I made it on a trial/error basis... I'd need to check some > notes.... > >>> I'll reply again if I'm able to find it... > >>> > >>> Regards. > >>> > >>> P.S.: Getting the tx id?! Why? > >>> > >>> On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< > >>> cesar_inacio_martins@yahoo.com.br> wrote: > >>> > >>>> Hi , > >>>> > >>>> IFX 11.50 FC9X6 , AIX 6.1 > >>>> > >>>> I'm trying create a simple UDR to get the current 'transaction id' > with > >>>> less overhead possible... > >>>> To use this UDR inside of SPL + Trigger... > >>>> > >>>> I'm not expert on C language, where play with it sometimes... > >>>> So , I getting some trouble to compile the .c file, what I not sure if > >>>> is some problem with gcc for AIX or the command line used... > >>>> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF > file' > >>>> > >>>> .... and following the John Miller IIUG/2010 presentation 'The Basics > of > >>>> Writing and Utilizing C-User Define Routines'... > >>>> > >>>> If anyone have any tips how solve this, I appreciate a lot... > >>>> > >>>> =========================================== > >>>> $ cat get_transid.c > >>>> #include "incl/public/mi.h" > >>>> #include "incl/public/milib.h"> >>>> > >>>> mi_integer get_transid(void){ > >>>> > >>>> mi_integer transid ; > >>>> > >>>> transid = mi_get_transaction_id() ; > >>>> > >>>> return transid ; > >>>> } > >>>> > >>>> $ gcc -g -Wall -fPIC -I/vulca/informix -c get_transid.c > >>>> $ l get* > >>>> -rw-rw-r-- 1 informix informix 178 Dec 15 14:09 get_transid.c > >>>> -rw-rw-r-- 1 informix informix 30140 Dec 16 07:35 get_transid.o> >>>> > >>>> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so > get_transid.o> >>>> collect2: get_transid.so: cannot open as COFF file > >>>> > >>>> $ gcc --version > >>>> gcc (GCC) 4.2.0> >>>> Copyright (C) 2007 Free Software Foundation, Inc. > >>>> This is free software; see the source for copying conditions. There > is NO > >>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > >>> PURPOSE. > >>>> $ ld --version> >>>> GNU find version 4.1 > >>>> > >>>> =========================================== > >>>> > >>>> I'm already try some differ approach on "-g" parameter (-gxcoff , > >>>> gxcoff+) without success. > >>>> > >>>> Anyone? > >>>> Regards > >>>> Cesar > >>>> > >>>> > >>>> > >>>> > >> > > ******************************************************************************* > >>>> Forum Note: Use "Reply" to post a response in the discussion forum. > >>>> > >>>> > >>> -- > >>> Fernando Nunes > >>> Portugal > >>> > >>> http://informix-technology.blogspot.com > >>> My email works... but I don't check it frequently... > >>> > >>> --20cf306f7710462d3704b433d817 > >>> > >>> > >>> > >>> > >> > > ******************************************************************************* > >>> Forum Note: Use "Reply" to post a response in the discussion forum. > >>> > >>> > >> --f46d0447a25f9884f404b433e081 > >> > >> > >> > > ******************************************************************************* > >> Forum Note: Use "Reply" to post a response in the discussion forum. > >> > > > > **********************************************

nope... (I include verbose mode this time...) *$ gcc -v -shared -o get_transid.so get_transid.o -lc* Using built-in specs. Target: powerpc-ibm-aix6.1.0.0 Configured with: ../configure --with-as=/usr/bin/as --with-ld=/usr/bin/ld --enable-languages=c,c++,java --prefix=/opt/freeware --enable-threads --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 --disable-libjava-multilib Thread model: aix gcc version 4.2.0 /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. get_transid.o -lc -lgcc_s -lc -lgcc_s ld: 0711-736 ERROR: Input file get_transid.o: XCOFF64 object files are not allowed in 32-bit mode. collect2: ld returned 8 exit status *$ OBJECT_MODE=64 gcc -v -shared -o get_transid.so get_transid.o -lc* Using built-in specs. Target: powerpc-ibm-aix6.1.0.0 Configured with: ../configure --with-as=/usr/bin/as --with-ld=/usr/bin/ld --enable-languages=c,c++,java --prefix=/opt/freeware --enable-threads --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 --disable-libjava-multilib Thread model: aix gcc version 4.2.0 /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. get_transid.o -lc -lgcc_s -lc -lgcc_s Assembler: /tmp//cc4bu01p.s: line 14: 1252-191 Only .llong should be used for relocatable expressions. /tmp//cc4bu01p.s: line 41: 1252-191 Only .llong should be used for relocatable expressions. /tmp//cc4bu01p.s: line 63: 1252-191 Only .llong should be used for relocatable expressions. /tmp//cc4bu01p.s: line 90: 1252-191 Only .llong should be used for relocatable expressions. collect2: gcc returned 1 exit status On 16/12/2011 12:19, Art Kagel wrote: > Try the link step without the "-Wl,-soname,get_transid.so" option. Just a > hunch. > > Art > > Art S. Kagel > Advanced DataTools (www.advancedatatools.com) > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > other organization with which I am associated either explicitly, > implicitly, or by inference. Neither do those opinions reflect those of > other individuals affiliated with any entity with which I am affiliated nor > those of the entities themselves. > > On Fri, Dec 16, 2011 at 7:03 AM, Cesar Inacio Martins< > cesar_inacio_martins@yahoo.com.br> wrote: > >> Complementing... >> >> Show as 32-bit XCOFF >> ========================================= >> $ gcc -Wall -fPIC -I/vulca/informix -c get_transid.c >> $ dump -ov get_transid.o>> >> get_transid.o: >> >> ***Object Module Header*** >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags >> >> 2 0x0000019e 22 0 0x0000 >> Flags=( DEP_SYSTEM ) >> Timestamp = "Dec 16 08:58:00 2011" >> Magic = 0x1df (32-bit XCOFF) >> >> ========================================= >> >> Now is 64-bit XCOFF .... still no working... >> >> ========================================= >> $ gcc -maix64 -Wall -fPIC -I/vulca/informix -c get_transid.c >> $ dump -ov get_transid.o >> get_transid.o:>> dump: get_transid.o: 0654-108 file is not valid in the current object >> file mode. >> >> Use the -X option to specify the desired object mode. >> $ dump -ovX64 get_transid.o>> >> get_transid.o: >> >> ***Object Module Header*** >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags >> >> 2 0x00000168 16 0 0x0000 >> Flags=( DEP_SYSTEM ) >> Timestamp = "Dec 16 08:58:42 2011" >> Magic = 0x1f7 (64-bit XCOFF) >> >> $ gcc -maix64 -shared -Wl,-soname,get_transid.so -o get_transid.so >> get_transid.o>> collect2: get_transid.so: cannot open as COFF file >> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o>> collect2: get_transid.so: cannot open as COFF file >> ========================================= >> >> On 16/12/2011 09:47, Cesar Inacio Martins wrote: >>> Hi Art, >>> >>> I tried it on both commands (the executable and the lib..) and not >>> work ... >>> >>> $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so >>> get_transid.o>>> collect2: get_transid.so: cannot open as COFF file >>> >>> >>> Other try... >>> >>> $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.c>>> cc1: error: unrecognized command line option "-m64" >>> >>> >>> I already try with -maix64 ... without success.. >>> >>> >>> >>> On 16/12/2011 09:26, Art Kagel wrote: >>>> IB the compile line is missing the "-m64" option. >>>> >>>> Art >>>> >>>> Art S. Kagel >>>> Advanced DataTools (www.advancedatatools.com) >>>> Blog:http://informix-myview.blogspot.com/ >>>> >>>> Disclaimer: Please keep in mind that my own opinions are my own opinions >>>> and do not reflect on my employer, Advanced DataTools, the IIUG, nor any >>>> other organization with which I am associated either explicitly, >>>> implicitly, or by inference. Neither do those opinions reflect those of >>>> other individuals affiliated with any entity with which I am affiliated >> nor >>>> those of the entities themselves. >>>> >>>> On Fri, Dec 16, 2011 at 6:24 AM, Fernando >> Nunes<domusonline@gmail.com>wrote: >>>>> I believe you need to specify the format (64bits COFF) on the >> compilation >>>>> line. I had to do more or less what you're trying to do recently but I >>>>> think I made it on a trial/error basis... I'd need to check some >> notes.... >>>>> I'll reply again if I'm able to find it... >>>>> >>>>> Regards. >>>>> >>>>> P.S.: Getting the tx id?! Why? >>>>> >>>>> On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< >>>>> cesar_inacio_martins@yahoo.com.br> wrote: >>>>> >>>>>> Hi , >>>>>> >>>>>> IFX 11.50 FC9X6 , AIX 6.1 >>>>>> >>>>>> I'm trying create a simple UDR to get the current 'transaction id' >> with >>>>>> less overhead possible... >>>>>> To use this UDR inside of SPL + Trigger... >>>>>> >>>>>> I'm not expert on C language, where play with it sometimes... >>>>>> So , I getting some trouble to compile the .c file, what I not sure if >>>>>> is some problem with gcc for AIX or the command line used... >>>>>> I'm stuck on error 'collect2: get_transid.so: cannot open as COFF >> file' >>>>>> .... and following the John Miller IIUG/2010 presentation 'The Basics >> of >>>>>> Writing and Utilizing C-User Define Routines'... >>>>>> >>>>>> If anyone have any tips how solve this, I appreciate a lot... >>>>>> >>>>>> =========================================== >>>>>> $ cat get_transid.c >>>>>> #include

Cesar, did you receive my answer to the private email? Did it help? On Fri, Dec 16, 2011 at 2:54 PM, Cesar Inacio Martins < cesar_inacio_martins@yahoo.com.br> wrote: > nope... > (I include verbose mode this time...) > > *$ gcc -v -shared -o get_transid.so get_transid.o -lc* > > Using built-in specs. > Target: powerpc-ibm-aix6.1.0.0 > Configured with: ../configure --with-as=/usr/bin/as > --with-ld=/usr/bin/ld --enable-languages=c,c++,java > --prefix=/opt/freeware --enable-threads > --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 > --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 > --disable-libjava-multilib > Thread model: aix > gcc version 4.2.0 > /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 > -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry > -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 > -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. > get_transid.o -lc -lgcc_s -lc -lgcc_s > ld: 0711-736 ERROR: Input file get_transid.o: > > XCOFF64 object files are not allowed in 32-bit mode. > collect2: ld returned 8 exit status > > *$ OBJECT_MODE=64 gcc -v -shared -o get_transid.so get_transid.o -lc* > Using built-in specs. > Target: powerpc-ibm-aix6.1.0.0 > Configured with: ../configure --with-as=/usr/bin/as > --with-ld=/usr/bin/ld --enable-languages=c,c++,java > --prefix=/opt/freeware --enable-threads > --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 > --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 > --disable-libjava-multilib > Thread model: aix > gcc version 4.2.0 > /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 > -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry > -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 > -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. > get_transid.o -lc -lgcc_s -lc -lgcc_s > Assembler: > /tmp//cc4bu01p.s: line 14: 1252-191 Only .llong should be used for > relocatable expressions. > /tmp//cc4bu01p.s: line 41: 1252-191 Only .llong should be used for > relocatable expressions. > /tmp//cc4bu01p.s: line 63: 1252-191 Only .llong should be used for > relocatable expressions. > /tmp//cc4bu01p.s: line 90: 1252-191 Only .llong should be used for > relocatable expressions. > collect2: gcc returned 1 exit status > > On 16/12/2011 12:19, Art Kagel wrote: > > Try the link step without the "-Wl,-soname,get_transid.so" option. Just a > > hunch. > > > > Art > > > > Art S. Kagel > > Advanced DataTools (www.advancedatatools.com) > > Blog: http://informix-myview.blogspot.com/ > > > > Disclaimer: Please keep in mind that my own opinions are my own opinions > > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any > > other organization with which I am associated either explicitly, > > implicitly, or by inference. Neither do those opinions reflect those of > > other individuals affiliated with any entity with which I am affiliated > nor > > those of the entities themselves. > > > > On Fri, Dec 16, 2011 at 7:03 AM, Cesar Inacio Martins< > > cesar_inacio_martins@yahoo.com.br> wrote: > > > >> Complementing... > >> > >> Show as 32-bit XCOFF > >> ========================================= > >> $ gcc -Wall -fPIC -I/vulca/informix -c get_transid.c > >> $ dump -ov get_transid.o> >> > >> get_transid.o: > >> > >> ***Object Module Header*** > >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags > >> > >> 2 0x0000019e 22 0 0x0000 > >> Flags=( DEP_SYSTEM ) > >> Timestamp = "Dec 16 08:58:00 2011" > >> Magic = 0x1df (32-bit XCOFF) > >> > >> ========================================= > >> > >> Now is 64-bit XCOFF .... still no working... > >> > >> ========================================= > >> $ gcc -maix64 -Wall -fPIC -I/vulca/informix -c get_transid.c > >> $ dump -ov get_transid.o > >> get_transid.o:> >> dump: get_transid.o: 0654-108 file is not valid in the current object > >> file mode. > >> > >> Use the -X option to specify the desired object mode. > >> $ dump -ovX64 get_transid.o> >> > >> get_transid.o: > >> > >> ***Object Module Header*** > >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags > >> > >> 2 0x00000168 16 0 0x0000 > >> Flags=( DEP_SYSTEM ) > >> Timestamp = "Dec 16 08:58:42 2011" > >> Magic = 0x1f7 (64-bit XCOFF) > >> > >> $ gcc -maix64 -shared -Wl,-soname,get_transid.so -o get_transid.so > >> get_transid.o> >> collect2: get_transid.so: cannot open as COFF file > >> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so get_transid.o> >> collect2: get_transid.so: cannot open as COFF file > >> ========================================= > >> > >> On 16/12/2011 09:47, Cesar Inacio Martins wrote: > >>> Hi Art, > >>> > >>> I tried it on both commands (the executable and the lib..) and not > >>> work ... > >>> > >>> $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so > >>> get_transid.o> >>> collect2: get_transid.so: cannot open as COFF file > >>> > >>> > >>> Other try... > >>> > >>> $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.c> >>> cc1: error: unrecognized command line option "-m64" > >>> > >>> > >>> I already try with -maix64 ... without success.. > >>> > >>> > >>> > >>> On 16/12/2011 09:26, Art Kagel wrote: > >>>> IB the compile line is missing the "-m64" option. > >>>> > >>>> Art > >>>> > >>>> Art S. Kagel > >>>> Advanced DataTools (www.advancedatatools.com) > >>>> Blog:http://informix-myview.blogspot.com/ > >>>> > >>>> Disclaimer: Please keep in mind that my own opinions are my own > opinions > >>>> and do not reflect on my employer, Advanced DataTools, the IIUG, nor > any > >>>> other organization with which I am associated either explicitly, > >>>> implicitly, or by inference. Neither do those opinions reflect those > of > >>>> other individuals affiliated with any entity with which I am > affiliated > >> nor > >>>> those of the entities themselves. > >>>> > >>>> On Fri, Dec 16, 2011 at 6:24 AM, Fernando > >> Nunes<domusonline@gmail.com>wrote: > >>>>> I believe you need to specify the format (64bits COFF) on the > >> compilation > >>>>> line. I had to do more or less what you're trying to do recently but > I > >>>>> think I made it on a trial/error basis... I'd need to check some > >> notes.... > >>>>> I'll reply again if I'm able to find it... > >>>>> > >>>>> Regards. > >>>>> > >>>>> P.S.: Getting the tx id?! Why? > >>>>> > >>>>> On Fri, Dec 16, 2011 at 10:42 AM, Cesar Inacio Martins< > >>>>> cesar_inacio_martins@yahoo.com.br> wrote: > >>>>> > >>>>>> Hi , > >>>>>> > >>>>>> IFX 11.50 FC9X6 , AIX 6.1 > >>>>>> > >>>>>> I'm trying create a simple UDR to get the current 'transaction id' > >> with > >>>>>> less overhead possible... > >>>>>> To use this UDR inside of SPL + Trigger... > >>>>>> > >>>>>> I'm not expert on C language, where play with it sometimes... > >>>

Just in case... I believe something like this: select tx.txid, hex(tx.address) from sysmaster:systxptab tx, sysmaster:sysrstcb r where r.sid = DBINFO('sessionid') and r.txp = tx.address would be easier (although possibly less efficient) Regards. On Fri, Dec 16, 2011 at 3:36 PM, Fernando Nunes <domusonline@gmail.com>wrote: > Cesar, did you receive my answer to the private email? Did it help? > > > On Fri, Dec 16, 2011 at 2:54 PM, Cesar Inacio Martins < > cesar_inacio_martins@yahoo.com.br> wrote: > >> nope... >> (I include verbose mode this time...) >> >> *$ gcc -v -shared -o get_transid.so get_transid.o -lc* >> >> Using built-in specs. >> Target: powerpc-ibm-aix6.1.0.0 >> Configured with: ../configure --with-as=/usr/bin/as >> --with-ld=/usr/bin/ld --enable-languages=c,c++,java >> --prefix=/opt/freeware --enable-threads >> --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 >> --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 >> --disable-libjava-multilib >> Thread model: aix >> gcc version 4.2.0 >> /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 >> -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry >> -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 >> -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. >> get_transid.o -lc -lgcc_s -lc -lgcc_s >> ld: 0711-736 ERROR: Input file get_transid.o: >> >> XCOFF64 object files are not allowed in 32-bit mode. >> collect2: ld returned 8 exit status >> >> *$ OBJECT_MODE=64 gcc -v -shared -o get_transid.so get_transid.o -lc* >> Using built-in specs. >> Target: powerpc-ibm-aix6.1.0.0 >> Configured with: ../configure --with-as=/usr/bin/as >> --with-ld=/usr/bin/ld --enable-languages=c,c++,java >> --prefix=/opt/freeware --enable-threads >> --enable-version-specific-runtime-libs --host=powerpc-ibm-aix6.1.0.0 >> --target=powerpc-ibm-aix6.1.0.0 --build=powerpc-ibm-aix6.1.0.0 >> --disable-libjava-multilib >> Thread model: aix >> gcc version 4.2.0 >> /opt/freeware/libexec/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/collect2 >> -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsect -bM:SRE -bnoentry >> -o get_transid.so -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0 >> -L/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/../../.. >> get_transid.o -lc -lgcc_s -lc -lgcc_s >> Assembler: >> /tmp//cc4bu01p.s: line 14: 1252-191 Only .llong should be used for >> relocatable expressions. >> /tmp//cc4bu01p.s: line 41: 1252-191 Only .llong should be used for >> relocatable expressions. >> /tmp//cc4bu01p.s: line 63: 1252-191 Only .llong should be used for >> relocatable expressions. >> /tmp//cc4bu01p.s: line 90: 1252-191 Only .llong should be used for >> relocatable expressions. >> collect2: gcc returned 1 exit status >> >> On 16/12/2011 12:19, Art Kagel wrote: >> > Try the link step without the "-Wl,-soname,get_transid.so" option. Just >> a >> > hunch. >> > >> > Art >> > >> > Art S. Kagel >> > Advanced DataTools (www.advancedatatools.com) >> > Blog: http://informix-myview.blogspot.com/ >> > >> > Disclaimer: Please keep in mind that my own opinions are my own opinions >> > and do not reflect on my employer, Advanced DataTools, the IIUG, nor any >> > other organization with which I am associated either explicitly, >> > implicitly, or by inference. Neither do those opinions reflect those of >> > other individuals affiliated with any entity with which I am affiliated >> nor >> > those of the entities themselves. >> > >> > On Fri, Dec 16, 2011 at 7:03 AM, Cesar Inacio Martins< >> > cesar_inacio_martins@yahoo.com.br> wrote: >> > >> >> Complementing... >> >> >> >> Show as 32-bit XCOFF >> >> ========================================= >> >> $ gcc -Wall -fPIC -I/vulca/informix -c get_transid.c >> >> $ dump -ov get_transid.o>> >> >> >> get_transid.o: >> >> >> >> ***Object Module Header*** >> >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags >> >> >> >> 2 0x0000019e 22 0 0x0000 >> >> Flags=( DEP_SYSTEM ) >> >> Timestamp = "Dec 16 08:58:00 2011" >> >> Magic = 0x1df (32-bit XCOFF) >> >> >> >> ========================================= >> >> >> >> Now is 64-bit XCOFF .... still no working... >> >> >> >> ========================================= >> >> $ gcc -maix64 -Wall -fPIC -I/vulca/informix -c get_transid.c >> >> $ dump -ov get_transid.o >> >> get_transid.o:>> >> dump: get_transid.o: 0654-108 file is not valid in the current object >> >> file mode. >> >> >> >> Use the -X option to specify the desired object mode. >> >> $ dump -ovX64 get_transid.o>> >> >> >> get_transid.o: >> >> >> >> ***Object Module Header*** >> >> # Sections Symbol Ptr # Symbols Opt Hdr Len Flags >> >> >> >> 2 0x00000168 16 0 0x0000 >> >> Flags=( DEP_SYSTEM ) >> >> Timestamp = "Dec 16 08:58:42 2011" >> >> Magic = 0x1f7 (64-bit XCOFF) >> >> >> >> $ gcc -maix64 -shared -Wl,-soname,get_transid.so -o get_transid.so >> >> get_transid.o>> >> collect2: get_transid.so: cannot open as COFF file >> >> $ gcc -shared -Wl,-soname,get_transid.so -o get_transid.so >> get_transid.o>> >> collect2: get_transid.so: cannot open as COFF file >> >> ========================================= >> >> >> >> On 16/12/2011 09:47, Cesar Inacio Martins wrote: >> >>> Hi Art, >> >>> >> >>> I tried it on both commands (the executable and the lib..) and not >> >>> work ... >> >>> >> >>> $ gcc -m64 -shared -Wl,-soname,get_transid.so -o get_transid.so >> >>> get_transid.o>> >>> collect2: get_transid.so: cannot open as COFF file >> >>> >> >>> >> >>> Other try... >> >>> >> >>> $ gcc -m64 -g -Wall -fPIC -I/vulca/informix -c get_transid.c>> >>> cc1: error: unrecognized command line option "-m64" >> >>> >> >>> >> >>> I already try with -maix64 ... without success.. >> >>> >> >>> >> >>> >> >>> On 16/12/2011 09:26, Art Kagel wrote: >> >>>> IB the compile line is missing the "-m64" option. >> >>>> >> >>>> Art >> >>>> >> >>>> Art S. Kagel >> >>>> Advanced DataTools (www.advancedatatools.com) >> >>>> Blog:http://informix-myview.blogspot.com/ >> >>>> >> >>>> Disclaimer: Please keep in mind that my own opinions are my own >> opinions >> >>>> and do not reflect on my employer, Advanced DataTools, the IIUG, nor >> any >> >>>> other organization with which I am associated either explicitly, >> >>>> implicitly, or by inference. Neither do those opinions reflect those >> of >> >>>> other individuals affiliated with any entity with which I am >> affiliated >> >> nor >> >>>> those of the entities themselves. >> >>>> >> >>>> On Fri, Dec 16, 2011 at 6:24 AM, Fernando >> >> Nunes<domusonline@gmail.com>wrote: >> >>>>> I believe you need to specify the format (64bits COFF) on the >> >> compilation >> >>>>> line. I had to do more or less what you're trying to do recently >> but I >> >>>>> think I made it on a trial/error basis... I'd need to check some >> >> notes.... >> >>>>> I'll reply again if I'm