RE: AIX and Informix

We do raw. If you create a logical volume and do a dd you should see something like the below dd if=/dev/ronline_115 ibs=512 AIX LVCBraw00cf8fef00004c0000000107online_115Mon Dec 12 11:24:15 2005 Mon Dec 12 11:24:15 2005 F8FEF4C00ymmy 0None56fc7f6c.16 -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of Doug Conrey Sent: Friday, October 20, 2006 11:16 AM To: Link, David A. (Omaha); tomcaml@yahoo.com; informix-list@iiug.org Subject: RE: AIX and Informix This prompts me to ask whether you are using raw volumes or some sort of cooked space. DC > -----Original Message----- > From: informix-list-bounces@iiug.org [mailto:informix-list- > bounces@iiug.org] On Behalf Of Link, David A. (Omaha) > Sent: Friday, October 20, 2006 10:11 AM > To: tomcaml@yahoo.com; informix-list@iiug.org > Subject: RE: AIX and Informix > > If memory serves me correctly IBM does write some of the LV data in the > first 512 bytes of the volume. Now that data is accessed very rawly and > is written when you issue some system commands which manages the LVs. I > am not sure which commands. > > I think when you fail/fall over using HACMP it will rebuild the data in > the first 512 bytes of the LV. This ends up overwriting your informix > data if you don't offset it. > > I have always used an offset of the LV in AIX. > > Here is a small document which kind of covers this. > > http://www.iiug.org/forums/ids/index.cgi/noframes/read/4433 > > You may find more info out on the web. > > Hope this points you in the correct direction. > > > David > > -----Original Message----- > From: informix-list-bounces@iiug.org > [mailto:informix-list-bounces@iiug.org] On Behalf Of tomcaml@yahoo.com > Sent: Friday, October 20, 2006 10:47 AM > To: informix-list@iiug.org > Subject: Re: AIX and Informix > > Doug > > yes - Fishy like fresh from the sea > > > Tom > > > > Doug Conrey wrote: > > This sounds fishy to me. We have plenty of dbspaces with an offset of > 0 > > (on 5.2 and 5.3), and have never had any problems with > > adding/dropping/using them. > > > > DC > > > > > -----Original Message----- > > > From: informix-list-bounces@iiug.org [mailto:informix-list- > > > bounces@iiug.org] On Behalf Of tomcaml@yahoo.com > > > Sent: Friday, October 20, 2006 9:22 AM > > > To: informix-list@iiug.org > > > Subject: Re: AIX and Informix > > > > > > Thanks for the comments. > > > We are running into several things. > > > > > > One is that we set the offset of the dbspace to 0. We are being told > > it > > > needs to have an offset of "something" - that AIX wants this for the > > > volume group management. Our current environ is HP which we have > > always > > > used an offset of 0 - it has never been an issue. We have our > > physical, > > > log and root spaces mirrored and there looks to be some kind of > > > corruption, according to support. Kinda wondering if the HACMP > > > clustering might be involved also but unsure. > > > What we are seeing is this: I dropped a large database and when I > went > > > to check out the spaces using onstat -d pertaining to the space the > DB > > > used to be in, the % used was a negative number. So the total size > > free > > > is greater than the total size allocated. > > > > > > Tom > > > > > > > > > Obnoxio The Clown wrote: > > > > tomcaml@yahoo.com said: > > > > > Hello > > > > > > > > > > We are running into some major walls trying to configure and use > > AIX > > > > > 5.3 and Informix v10 with HACMP clustering and Informix HDR. AIX > > looks > > > > > to be very behind the times, as does the clustering piece. This > is > > for > > > > > an intended migration of the main "cash cow" application. Does > > anyone > > > > > run their "important stuff" on AIX ? I have been researching and > > most > > > > > of what I see is people using AIX from years back or they only > use > > AIX > > > > > for smaller apps that they don't have great concerns being down. > > > > > Comments, Suggestions, Rants or Raves? > > > > > > > > Personally, I think AIX tin is very good. I can't comment on > HACMP, > > > other > > > > than that I've never met anyone who used ANY clustering software > > (HACMP, > > > > Sun, Veritas, Compaq) who didn't prefer HDR. > > > > > > > > -- > > > > Bye now, > > > > Obnoxio > > > > > > > > "... no bill is required as no value was provided." > > > > -- Christine Normile > > > > > > > > -- > > > > This message has been scanned for viruses and > > > > dangerous content by OpenProtect(http://www.openprotect.com), and > is > > > > believed to be clean. > > > > > > _______________________________________________ > > > Informix-list mailing list > > > Informix-list@iiug.org > > > http://www.iiug.org/mailman/listinfo/informix-list > > _______________________________________________ > Informix-list mailing list > Informix-list@iiug.org > http://www.iiug.org/mailman/listinfo/informix-list > _______________________________________________ > Informix-list mailing list > Informix-list@iiug.org > http://www.iiug.org/mailman/listinfo/informix-list _______________________________________________ Informix-list mailing list Informix-list@iiug.org http://www.iiug.org/mailman/listinfo/informix-list