Re: Arghh! Please Help.

I found that when I moved from 5.x to 7.x, my memory requirements DOUBLED. Just something to be aware of, 7.x chews a ton of memory. <rico@wsx.wsex.com> wrote in message news:7f0aei$41g$1@news.xmission.com... > > Hello All, > > I have upgraded Online 5.0 to IDS 7.3 while also upgrading from a ALR 6xPentiumPro 200 to a Sun E3500 w/4x336Mhz UltraSparc. The new setup is overall a tiny bit faster for some things, or about twice as slow for a lot of things. > > I have spent a lot of time trying to tune IDS 7.3, but still cannot get the results I would expect. Simple things on the SCO/Online5.0 are about 1.5 to 2 times slower on the SUN/IDS7.3 box. (Before you yell at me OPTCOMPIND=0) > > Here are a few questions I was hoping some of you might be able to help me with: > > 1) On the SCO/Online5.0 box, when I turn on explain processing, a query takes around 2 to 3 times longer, on the SUN/IDS box, a query with explain processing turned on takes around 40 - 50 times as long. Is this normal? > > 2) In the release notes for IDS 7.3 on Solaris 2.6, the kernel parameter "enable_sm_wa = 1" should be set, however my Solaris 2.6 box complains that the parameter "enable_sm_wa" is not defined within the kernel. Could this affect anything? > > 3) I am using Disksuite on the E3500 to software mirror my root disk and my /usr partition which is where the informix installation is located, could this adversely affect performance (I am sure it would a little, but how much?) ? > > 4) Would having the physical and logical logs residing in the root dbspace effect query performance? > > 5) Last question is I have noticed on some queries, IDS7.3 does a dynamic hash join where Online 5.0 does a sort merge. Is there any way for me to force IDS 7.3 to do a sort merge? > > Some final notes, both systems are configured with 512MB main memory, the Sparc processors have a 4MB L2 cache as opposed to the P-Pro's which have a 256k L2. The Intel box uses Fast-UW-SCSI and the E3500 uses internal FC-AL. Both DB's use buffered logging. > > Included below is my IDS 7.3 onstat -c and -p. Thanks in advance. > > Olaf > > PS - I really hope someone can help me because I am going to puke if I cannot get a E3500 w/IDS 7.3 to run faster than 6 Pentium Pros w/Online5.0. > > -------------------------------------------------------------------------- ------ > -------------------------------------------------------------------------- ------ > > Informix Dynamic Server Version 7.30.UC6 -- On-Line -- Up 00:05:30 -- 311296 Kbytes > > Configuration File: /usr/local/informix/etc/onconfig.use > #************************************************************************** > # > # INFORMIX SOFTWARE, INC. > # > # Title: onconfig.std > # Description: Informix Dynamic Server Configuration Parameters > # > #************************************************************************** > > # Root Dbspace Configuration > > ROOTNAME dbroot # Root dbspace name > ROOTPATH /dev/lrdbroot # Path for device containing root dbspace > ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) > ROOTSIZE 2090000 # Size of root dbspace (Kbytes)> > # Disk Mirroring Configuration Parameters > > MIRROR 1 # Mirroring flag (Yes = 1, No = 0) > MIRRORPATH /dev/lrdbroot2 # Path for device containing mirrored root > MIRROROFFSET 0 # Offset into mirrored device (Kbytes)> > # Physical Log Configuration > > PHYSDBS dbroot # Location (dbspace) of physical log > PHYSFILE 8000 # Physical log file size (Kbytes)> > # Logical Log Configuration > > LOGFILES 55 # Number of logical log files > LOGSIZE 12500 # Logical log size (Kbytes)> > # Diagnostics > > MSGPATH /usr/local/informix/online.log # System message log file path > CONSOLE /usr/local/informix/console.log # System console message path > ALARMPROGRAM /usr/local/informix/etc/log_full.sh # Alarm program path > SYSALARMPROGRAM /usr/local/informix/etc/evidence.sh # System Alarm program path > TBLSPACE_STATS 1> > # System Archive Tape Device > > TAPEDEV /dev/rmt/0 # Tape device path > TAPEBLK 32 # Tape block size (Kbytes) > TAPESIZE 12000000 # Maximum amount of data to put on tape (Kbytes)> > # Log Archive Tape Device > > LTAPEDEV /dev/null # Log tape device path > LTAPEBLK 32 # Log tape block size (Kbytes) > LTAPESIZE 12000000 # Max amount of data to put on log tape (Kbytes)> > # Optical > > STAGEBLOB # Informix Dynamic Server/Optical staging area > > # System Configuration > > SERVERNUM 0 # Unique id corresponding to a DynamicServer instance > DBSERVERNAME world # Name of default database server > DBSERVERALIASES # List of alternate dbservernames > DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. > RESIDENT 1 # Forced residency flag (Yes = 1, No = 0) > > MULTIPROCESSOR 1 # 0 for single-processor, 1 formulti-processor > NUMCPUVPS 3 # Number of user (cpu) vps > SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps toone > > NOAGE 1 # Process aging > AFF_SPROC 1 # Affinity start processor > AFF_NPROCS 3 # Affinity number of processors> > # Shared Memory Parameters > > LOCKS 20000 # Maximum number of locks > BUFFERS 128000 # Maximum number of shared buffers > NUMAIOVPS 1 # Number of IO vps > PHYSBUFF 32 # Physical log buffer size (Kbytes) > LOGBUFF 32 # Logical log buffer size (Kbytes)> LOGSMAX 100 # Maximum number of logical log files > CLEANERS 8 # Number of buffer cleaner processes > SHMBASE 0xa000000 # Shared memory base address > SHMVIRTSIZE 32768 # initial virtual shared memory segmentsize > SHMADD 16384 # Size of new shared memory segments (Kbytes) > SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited > CKPTINTVL 300 # Check point interval (in sec) > LRUS 8 # Number of LRU queues > LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit > LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit > LTXHWM 50 # Long transaction high water markpercentage > LTXEHWM 60 # Long transaction high water mark (exclusive) > TXTIMEOUT 0x12c # Transaction timeout (in sec) > STACKSIZE 32 # Stack size (Kbytes)> > # System Page Size > # BUFFSIZE - Dynamic Server no longer supports this configuration parameter. > # To de