Checkpoint

This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C01166.DFA6EBAE Content-Type: text/plain; charset="iso-8859-1" Hi all, Why the checkpoint take longer time to complete? Is it something not right at onconfig file??? Server = SUN E6500 OS = Sun Solaris 2.6 Processors = 10 Memory = 4G Any help would be greatly appreciated. Thank you. Best Regards, Jason Informix Dynamic Server Version 7.30.UC5 -- On-Line -- Up 13:02:43 -- 1587776 Kbytes Message Log File: /usr/informix7/online.log 10:20:55 Logical Log 74491 Complete. 10:25:06 Checkpoint Completed: duration was 5 seconds. 10:30:06 Logical Log 74492 Complete. 10:30:06 Logical Log 74492 Complete. 10:30:11 Checkpoint Completed: duration was 5 seconds. 10:35:16 Checkpoint Completed: duration was 5 seconds. 10:40:21 Checkpoint Completed: duration was 5 seconds. 10:42:15 Logical Log 74493 Complete. 10:42:15 Logical Log 74493 Complete. 10:42:30 Logical Log 74494 Complete. 10:42:30 Logical Log 74494 Complete. 10:45:33 Checkpoint Completed: duration was 12 seconds. 10:51:46 Checkpoint Completed: duration was 73 seconds. 11:02:01 Checkpoint Completed: duration was 315 seconds. 11:02:31 Logical Log 74495 Complete. 11:02:31 Logical Log 74495 Complete. 11:06:46 Logical Log 74496 Complete. 11:06:46 Logical Log 74496 Complete. 11:07:03 Checkpoint Completed: duration was 2 seconds. 11:07:32 Checkpoint Completed: duration was 0 seconds. # Root Dbspace Configuration ROOTNAME rootdbs # Root dbspace nameROOTPATH /dev/rawlinks/rootdb01 # Path for device containing root dbspace ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes) ROOTSIZE 1000000 # Size of root dbspace (Kbytes) # Disk Mirroring Configuration Parameters MIRROR 0 # Mirroring flag (Yes = 1, No = 0) MIRRORPATH # Path for device containing mirrored root MIRROROFFSET 0 # Offset into mirrored device (Kbytes) # Physical Log Configuration PHYSDBS rootdbs # Location (dbspace) of physical log PHYSFILE 256000 # Physical log file size (Kbytes) # Logical Log Configuration LOGFILES 156 # Number of logical log files LOGSIZE 20000 # Logical log size (Kbytes) # Diagnostics MSGPATH /usr/informix7/online.log # System message log file path CONSOLE /dev/console # System console message path ALARMPROGRAM /usr/informix7/etc/no_log.sh # Alarm program path # System Archive Tape Device TAPEDEV /dev/rmt/0h TAPEBLK 1024 # Tape block size (Kbytes) TAPESIZE 40000000 # Maximum amount of data to put on tape (Kbytes) # Log Archive Tape Device LTAPEDEV /dev/null # Tape device path LTAPEBLK 16 # Tape block size (Kbytes) LTAPESIZE 7000000 # Maximum amount of data to put on tape (Kbytes) # Optical STAGEBLOB # INFORMIX-OnLine/Optical staging area # System Configuration SERVERNUM 0 # Unique id corresponding to a OnLineinstance DBSERVERNAME infimacs2 # Name of default database server DBSERVERALIASES infimacs2_shm # List of alternate dbservernames NETTYPE ipcshm,9,100,CPU NETTYPE tlitcp,4,100,NET DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env. RESIDENT 0 # Forced residency flag (Yes = 1, No = 0) MULTIPROCESSOR 1 # 0 for single-processor, 1 formulti-processor NUMCPUVPS 9 # Number of user (cpu) vps#NUMCPUVPS 6 # Number of user (cpu) vps SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps toone NOAGE 1 # Process aging AFF_SPROC 0 # Affinity start processor AFF_NPROCS 9 # Affinity number of processors # Shared Memory Parameters LOCKS 4000000 # Increase by KH on 27 Jan 1999 BUFFERS 500000 # Increase by KH on 10 Jan 2000 NUMAIOVPS 6 # Number of IO vps PHYSBUFF 640 # Physical log buffer size (Kbytes) LOGBUFF 640 # Logical log buffer size (Kbytes)LOGSMAX 200 # Increased by Jason on 12 July 2000 CLEANERS 127 # CLEANERS changed by Kok Hong on 25th Aug2000 SHMBASE 0xa000000 # Shared memory base address SHMVIRTSIZE 327680 # Size of new shared memory segments (Kbytes) SHMADD 32768 # Size of new shared memory segments (Kbytes) SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited CKPTINTVL 300 # Check point interval (in sec) LRUS 127 # LRUS changed by Kok Hong on 25th Aug 2000 LRU_MAX_DIRTY 2 # LRU percent dirty begin cleaning limit LRU_MIN_DIRTY 1 # LRU percent dirty end cleaning limit LTXHWM 50 # Long transaction high water markpercentage LTXEHWM 60 # Long transaction high water mark (exclusive) TXTIMEOUT 0x12c # Transaction timeout (in sec) STACKSIZE 32 # Stack size (Kbytes) # System Page Size # BUFFSIZE - OnLine no longer supports this configuration parameter. # To determine the page size used by OnLine on your platform # see the last line of output from the command, 'onstat -b'. # Recovery Variables # OFF_RECVRY_THREADS: # Number of parallel worker threads during fast recovery or an offline restore. # ON_RECVRY_THREADS: # Number of parallel worker threads during an online restore. OFF_RECVRY_THREADS 10 # Default number of offline workerthreads ON_RECVRY_THREADS 5 # Default number of online worker threads # Data Replication Variables # DRAUTO: 0 manual, 1 retain type, 2 reverse type DRAUTO 0 # DR automatic switchover DRINTERVAL 30 # DR max time between DR buffer flushes (in sec) DRTIMEOUT 30 # DR network timeout (in sec)DRLOSTFOUND /usr/informix7/etc/dr.lostfound # DR lost+found file path # Backup/Restore variables BAR_ACT_LOG /tmp/bar_act.log BAR_MAX_BACKUP 0 BAR_RETRY 1 BAR_NB_XPORT_COUNT 10 BAR_XFER_BUF_SIZE 31 # Read Ahead Variables RA_PAGES 64 # Number of pages to attempt to read ahead RA_THRESHOLD 16 # Number of pages left before next group # DBSPACETEMP: # OnLine equivalent of DBTEMP for SE. This is the list of dbspaces # that the OnLine SQL Engine will use to create temp tables etc. # If specified it must be a colon separated list of dbspaces that exist # when the OnLine system is brought online. If not speci

Jason , This is only a text group. PLEASE , PLEASE do not send MIME/HTML versions across. 3 reasons why I say this. 1. Because you duplicate the message 2. A number of people have already asked you to stop posting mail in MIME/HTML format. 3. The most important. Viewing large messages kills my 3 year old laptop. Thank you Pankaj JasonYLPang@pg.SLR.com wrote in message <8ofbog$ejk$1@news.xmission.com>... | |This message is in MIME format. Since your mail reader does not understand |this format, some or all of this message may not be legible. | |------_=_NextPart_001_01C01166.DFA6EBAE |Content-Type: text/plain; | charset="iso-8859-1" | |Hi all, | |Why the checkpoint take longer time to complete? Is it something not right |at onconfig file???