11.5FC7WE x PROCS AFFINITY
On IDS 11.5FC7WE under RHEL 6 (4 cores), the online.log showed all CPU VPs being "Affinitied ... to phys proc 0", seemingly pinning every CPU VP to one core while the other CPUs sat idle; the poster asked how to disable affinity since no AFFINITY parameter exists. His ONCONFIG had only MULTIPROCESSOR 1, VPCLASS cpu,num=3,noage, SINGLE_CPU_VP 0. Art Kagel said that config requests no affinity at all, so no such messages should appear, and advised opening a PMR with IBM; another poster suggested aff settings like aff=1-3 but that was a misreading. No resolution is recorded in the thread.
Auto-generated by DrWatson from the posts below — may be imperfect; read the full thread.
Hi, everyone. I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . The machine I'm using have 4 procs and I want to use 3 of then in Informix (VPCLASS cpu).Since the first time I tried to put my server up (online) I could see in online.log the message Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc 0Affinitied VP "4" to phys proc 0Affinitied VP "5" to phys proc 0 I think the informix VPCLASS are "affiniting" every single CPUVP to the same physical processor. Almost all CPU I have are idle. HGow can I disabled affinity in this version, once I don't have the AFFINITY parameters ? Thanks a lot André Luiz Rufino
Post the VPCLASS cpu entry from your ONCONFIG file. Art Art S. Kagel, President and Principal Consultant ASK Database Management www.askdbmgt.com Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino <andre_rufino@msn.com> wrote: > Hi, everyone. > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . The machine > I'm using have 4 procs and I want to use 3 of then in Informix (VPCLASS > cpu).Since the first time I tried to put my server up (online) I could see > in > online.log the message > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc 0Affinitied > VP > "4" to phys proc 0Affinitied VP "5" to phys proc 0 > I think the informix VPCLASS are "affiniting" every single CPUVP to the > same > physical processor. Almost all CPU I have are idle. HGow can I disabled > affinity in this version, once I don't have the AFFINITY parameters ? > Thanks a lot > André Luiz Rufino > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --bcaec51a74b49efc45050fec4b5e
Here is it, Art MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB 0SINGLE_CPU_VP 0 > To: ids@iiug.org > From: art.kagel@gmail.com > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > Post the VPCLASS cpu entry from your ONCONFIG file. > > Art > > Art S. Kagel, President and Principal Consultant > ASK Database Management > www.askdbmgt.com > > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on the IIUG, nor any other organization with which I am > associated either explicitly, implicitly, or by inference. Neither do > those opinions reflect those of other individuals affiliated with any > entity with which I am affiliated nor those of the entities themselves. > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino <andre_rufino@msn.com> > wrote: > > > Hi, everyone. > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . The machine > > I'm using have 4 procs and I want to use 3 of then in Informix (VPCLASS > > cpu).Since the first time I tried to put my server up (online) I could see > > in > > online.log the message > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc 0Affinitied > > VP > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 > > I think the informix VPCLASS are "affiniting" every single CPUVP to the > > same > > physical processor. Almost all CPU I have are idle. HGow can I disabled > > affinity in this version, once I don't have the AFFINITY parameters ? > > Thanks a lot > > André Luiz Rufino > > > > > > > > > ******************************************************************************* > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > --bcaec51a74b49efc45050fec4b5e > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >
Andre: With those settings you should not be seeing affinity at all! I was expecting to see something like: VPCLASS cpu,num=3,noage,aff_nprocs=1,aff_sproc=0 Your setting is correct for no affinity. Open a PMR. Art Art S. Kagel, President and Principal Consultant ASK Database Management www.askdbmgt.com Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Wed, Feb 25, 2015 at 12:32 PM, André Luiz Rufino <andre_rufino@msn.com> wrote: > Here is it, Art > MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB 0SINGLE_CPU_VP 0 > > > To: ids@iiug.org > > From: art.kagel@gmail.com > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > > > Post the VPCLASS cpu entry from your ONCONFIG file. > > > > Art > > > > Art S. Kagel, President and Principal Consultant > > ASK Database Management > > www.askdbmgt.com > > > > Blog: http://informix-myview.blogspot.com/ > > > > Disclaimer: Please keep in mind that my own opinions are my own opinions > > and do not reflect on the IIUG, nor any other organization with which I > am > > associated either explicitly, implicitly, or by inference. Neither do > > those opinions reflect those of other individuals affiliated with any > > entity with which I am affiliated nor those of the entities themselves. > > > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino < > andre_rufino@msn.com> > > wrote: > > > > > Hi, everyone. > > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . The > machine > > > I'm using have 4 procs and I want to use 3 of then in Informix (VPCLASS > > > cpu).Since the first time I tried to put my server up (online) I could > see > > > in > > > online.log the message > > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc > 0Affinitied > > > VP > > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 > > > I think the informix VPCLASS are "affiniting" every single CPUVP to the > > > same > > > physical processor. Almost all CPU I have are idle. HGow can I disabled > > > affinity in this version, once I don't have the AFFINITY parameters ? > > > Thanks a lot > > > André Luiz Rufino > > > > > > > > > > > > > > > > ******************************************************************************* > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > --bcaec51a74b49efc45050fec4b5e > > > > > > > > ******************************************************************************* > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --047d7b10ce3d251597050fee251e
Andre, Can you post the full onconfig file? Regards, David. > On 25 February 2015 at 18:53 Art Kagel <art.kagel@gmail.com> wrote: > > > Andre: > > With those settings you should not be seeing affinity at all! I was > expecting to see something like: > > VPCLASS cpu,num=3,noage,aff_nprocs=1,aff_sproc=0 > > Your setting is correct for no affinity. Open a PMR. > > Art > > Art S. Kagel, President and Principal Consultant > ASK Database Management > www.askdbmgt.com > > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own opinions > and do not reflect on the IIUG, nor any other organization with which I am > associated either explicitly, implicitly, or by inference. Neither do > those opinions reflect those of other individuals affiliated with any > entity with which I am affiliated nor those of the entities themselves. > > On Wed, Feb 25, 2015 at 12:32 PM, André Luiz Rufino <andre_rufino@msn.com> > wrote: > > > Here is it, Art > > MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB 0SINGLE_CPU_VP 0 > > > > > To: ids@iiug.org > > > From: art.kagel@gmail.com > > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > > > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > > > > > Post the VPCLASS cpu entry from your ONCONFIG file. > > > > > > Art > > > > > > Art S. Kagel, President and Principal Consultant > > > ASK Database Management > > > www.askdbmgt.com > > > > > > Blog: http://informix-myview.blogspot.com/ > > > > > > Disclaimer: Please keep in mind that my own opinions are my own opinions > > > and do not reflect on the IIUG, nor any other organization with which I > > am > > > associated either explicitly, implicitly, or by inference. Neither do > > > those opinions reflect those of other individuals affiliated with any > > > entity with which I am affiliated nor those of the entities themselves. > > > > > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino < > > andre_rufino@msn.com> > > > wrote: > > > > > > > Hi, everyone. > > > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . The > > machine > > > > I'm using have 4 procs and I want to use 3 of then in Informix (VPCLASS > > > > cpu).Since the first time I tried to put my server up (online) I could > > see > > > > in > > > > online.log the message > > > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc > > 0Affinitied > > > > VP > > > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 > > > > I think the informix VPCLASS are "affiniting" every single CPUVP to the > > > > same > > > > physical processor. Almost all CPU I have are idle. HGow can I disabled > > > > affinity in this version, once I don't have the AFFINITY parameters ? > > > > Thanks a lot > > > > André Luiz Rufino > > > > > > > > > > > > > > > > > > > > > > > > ******************************************************************************* > > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > > > > > --bcaec51a74b49efc45050fec4b5e > > > > > > > > > > > > > > ******************************************************************************* > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > > > ******************************************************************************* > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > --047d7b10ce3d251597050fee251e > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. >
I thought he said IDS was running everything on one processor and leaving the others idle. I think he was asking how to turn affinity on for three processors and leave one for other purposes. I think what he wants is to set up his VPCLASS like this: VPCLASS cpu,num=3,aff=1-3,noage But, I could be mistaken... --EEM > -----Original Message----- > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of > Art Kagel > Sent: Wednesday, February 25, 2015 12:53 PM > To: ids@iiug.org > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34718] > > Andre: > > With those settings you should not be seeing affinity at all! I was > expecting to see something like: > > VPCLASS cpu,num=3,noage,aff_nprocs=1,aff_sproc=0 > > Your setting is correct for no affinity. Open a PMR. > > Art > > Art S. Kagel, President and Principal Consultant ASK Database > Management www.askdbmgt.com > > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own > opinions and do not reflect on the IIUG, nor any other organization > with which I am associated either explicitly, implicitly, or by > inference. Neither do those opinions reflect those of other individuals > affiliated with any entity with which I am affiliated nor those of the > entities themselves. > > On Wed, Feb 25, 2015 at 12:32 PM, André Luiz Rufino > <andre_rufino@msn.com> > wrote: > > > Here is it, Art > > MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB > > 0SINGLE_CPU_VP 0 > > > > > To: ids@iiug.org > > > From: art.kagel@gmail.com > > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > > > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > > > > > Post the VPCLASS cpu entry from your ONCONFIG file. > > > > > > Art > > > > > > Art S. Kagel, President and Principal Consultant ASK Database > > > Management www.askdbmgt.com > > > > > > Blog: http://informix-myview.blogspot.com/ > > > > > > Disclaimer: Please keep in mind that my own opinions are my own > > > opinions and do not reflect on the IIUG, nor any other organization > > > with which I > > am > > > associated either explicitly, implicitly, or by inference. Neither > > > do those opinions reflect those of other individuals affiliated > with > > > any entity with which I am affiliated nor those of the entities > themselves. > > > > > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino < > > andre_rufino@msn.com> > > > wrote: > > > > > > > Hi, everyone. > > > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . > > > > The > > machine > > > > I'm using have 4 procs and I want to use 3 of then in Informix > > > > (VPCLASS cpu).Since the first time I tried to put my server up > > > > (online) I could > > see > > > > in > > > > online.log the message > > > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc > > 0Affinitied > > > > VP > > > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 I think the > > > > informix VPCLASS are "affiniting" every single CPUVP to the same > > > > physical processor. Almost all CPU I have are idle. HGow can I > > > > disabled affinity in this version, once I don't have the AFFINITY > parameters ? > > > > Thanks a lot > > > > André Luiz Rufino > > > > > > > > > > > > > > > > > > > > > > > > *********************************************************************** > ******** > > > > Forum Note: Use "Reply" to post a response in the discussion > forum. > > > > > > > > > > > > > > --bcaec51a74b49efc45050fec4b5e > > > > > > > > > > > > > > *********************************************************************** > ******** > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > > > *********************************************************************** > ******** > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > --047d7b10ce3d251597050fee251e > > > *********************************************************************** > ******** > Forum Note: Use "Reply" to post a response in the discussion forum.
Without affinity set there should be no messages in the message log about affining CPU VPs to particular physical processor cores and the CPU VPs should be free to float among all available cores as the OS load balancing algorithms allow. Art Art S. Kagel, President and Principal Consultant ASK Database Management www.askdbmgt.com Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on the IIUG, nor any other organization with which I am associated either explicitly, implicitly, or by inference. Neither do those opinions reflect those of other individuals affiliated with any entity with which I am affiliated nor those of the entities themselves. On Wed, Feb 25, 2015 at 2:34 PM, Everett Mills < Everett.Mills@nationalbeef.com> wrote: > I thought he said IDS was running everything on one processor and leaving > the > others idle. I think he was asking how to turn affinity on for three > processors and leave one for other purposes. I think what he wants is to > set > up his VPCLASS like this: > > VPCLASS cpu,num=3,aff=1-3,noage > > But, I could be mistaken... > > --EEM > > > -----Original Message----- > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of > > Art Kagel > > Sent: Wednesday, February 25, 2015 12:53 PM > > To: ids@iiug.org > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34718] > > > > Andre: > > > > With those settings you should not be seeing affinity at all! I was > > expecting to see something like: > > > > VPCLASS cpu,num=3,noage,aff_nprocs=1,aff_sproc=0 > > > > Your setting is correct for no affinity. Open a PMR. > > > > Art > > > > Art S. Kagel, President and Principal Consultant ASK Database > > Management www.askdbmgt.com > > > > Blog: http://informix-myview.blogspot.com/ > > > > Disclaimer: Please keep in mind that my own opinions are my own > > opinions and do not reflect on the IIUG, nor any other organization > > with which I am associated either explicitly, implicitly, or by > > inference. Neither do those opinions reflect those of other individuals > > affiliated with any entity with which I am affiliated nor those of the > > entities themselves. > > > > On Wed, Feb 25, 2015 at 12:32 PM, André Luiz Rufino > > <andre_rufino@msn.com> > > wrote: > > > > > Here is it, Art > > > MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB > > > 0SINGLE_CPU_VP 0 > > > > > > > To: ids@iiug.org > > > > From: art.kagel@gmail.com > > > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > > > > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > > > > > > > Post the VPCLASS cpu entry from your ONCONFIG file. > > > > > > > > Art > > > > > > > > Art S. Kagel, President and Principal Consultant ASK Database > > > > Management www.askdbmgt.com > > > > > > > > Blog: http://informix-myview.blogspot.com/ > > > > > > > > Disclaimer: Please keep in mind that my own opinions are my own > > > > opinions and do not reflect on the IIUG, nor any other organization > > > > with which I > > > am > > > > associated either explicitly, implicitly, or by inference. Neither > > > > do those opinions reflect those of other individuals affiliated > > with > > > > any entity with which I am affiliated nor those of the entities > > themselves. > > > > > > > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino < > > > andre_rufino@msn.com> > > > > wrote: > > > > > > > > > Hi, everyone. > > > > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux . > > > > > The > > > machine > > > > > I'm using have 4 procs and I want to use 3 of then in Informix > > > > > (VPCLASS cpu).Since the first time I tried to put my server up > > > > > (online) I could > > > see > > > > > in > > > > > online.log the message > > > > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys proc > > > 0Affinitied > > > > > VP > > > > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 I think the > > > > > informix VPCLASS are "affiniting" every single CPUVP to the same > > > > > physical processor. Almost all CPU I have are idle. HGow can I > > > > > disabled affinity in this version, once I don't have the AFFINITY > > parameters ? > > > > > Thanks a lot > > > > > André Luiz Rufino > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *********************************************************************** > > ******** > > > > > Forum Note: Use "Reply" to post a response in the discussion > > forum. > > > > > > > > > > > > > > > > > > --bcaec51a74b49efc45050fec4b5e > > > > > > > > > > > > > > > > > > > > *********************************************************************** > > ******** > > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > > > > > > > > > *********************************************************************** > > ******** > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > > --047d7b10ce3d251597050fee251e > > > > > > *********************************************************************** > > ******** > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > ******************************************************************************* > Forum Note: Use "Reply" to post a response in the discussion forum. > > --001a1142dc0cf8e02d050fef3a20
OK, I missed that. > -----Original Message----- > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of > Art Kagel > Sent: Wednesday, February 25, 2015 2:11 PM > To: ids@iiug.org > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34721] > > Without affinity set there should be no messages in the message log > about affining CPU VPs to particular physical processor cores and the > CPU VPs should be free to float among all available cores as the OS > load balancing algorithms allow. > > Art > > Art S. Kagel, President and Principal Consultant ASK Database > Management www.askdbmgt.com > > Blog: http://informix-myview.blogspot.com/ > > Disclaimer: Please keep in mind that my own opinions are my own > opinions and do not reflect on the IIUG, nor any other organization > with which I am associated either explicitly, implicitly, or by > inference. Neither do those opinions reflect those of other individuals > affiliated with any entity with which I am affiliated nor those of the > entities themselves. > > On Wed, Feb 25, 2015 at 2:34 PM, Everett Mills < > Everett.Mills@nationalbeef.com> wrote: > > > I thought he said IDS was running everything on one processor and > > leaving the others idle. I think he was asking how to turn affinity > on > > for three processors and leave one for other purposes. I think what > he > > wants is to set up his VPCLASS like this: > > > > VPCLASS cpu,num=3,aff=1-3,noage > > > > But, I could be mistaken... > > > > --EEM > > > > > -----Original Message----- > > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf > > > Of Art Kagel > > > Sent: Wednesday, February 25, 2015 12:53 PM > > > To: ids@iiug.org > > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34718] > > > > > > Andre: > > > > > > With those settings you should not be seeing affinity at all! I was > > > expecting to see something like: > > > > > > VPCLASS cpu,num=3,noage,aff_nprocs=1,aff_sproc=0 > > > > > > Your setting is correct for no affinity. Open a PMR. > > > > > > Art > > > > > > Art S. Kagel, President and Principal Consultant ASK Database > > > Management www.askdbmgt.com > > > > > > Blog: http://informix-myview.blogspot.com/ > > > > > > Disclaimer: Please keep in mind that my own opinions are my own > > > opinions and do not reflect on the IIUG, nor any other organization > > > with which I am associated either explicitly, implicitly, or by > > > inference. Neither do those opinions reflect those of other > > > individuals affiliated with any entity with which I am affiliated > > > nor those of the entities themselves. > > > > > > On Wed, Feb 25, 2015 at 12:32 PM, André Luiz Rufino > > > <andre_rufino@msn.com> > > > wrote: > > > > > > > Here is it, Art > > > > MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB > > > > 0SINGLE_CPU_VP 0 > > > > > > > > > To: ids@iiug.org > > > > > From: art.kagel@gmail.com > > > > > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > > > > > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > > > > > > > > > Post the VPCLASS cpu entry from your ONCONFIG file. > > > > > > > > > > Art > > > > > > > > > > Art S. Kagel, President and Principal Consultant ASK Database > > > > > Management www.askdbmgt.com > > > > > > > > > > Blog: http://informix-myview.blogspot.com/ > > > > > > > > > > Disclaimer: Please keep in mind that my own opinions are my own > > > > > opinions and do not reflect on the IIUG, nor any other > > > > > organization with which I > > > > am > > > > > associated either explicitly, implicitly, or by inference. > > > > > Neither do those opinions reflect those of other individuals > > > > > affiliated > > > with > > > > > any entity with which I am affiliated nor those of the entities > > > themselves. > > > > > > > > > > On Wed, Feb 25, 2015 at 11:20 AM, André Luiz Rufino < > > > > andre_rufino@msn.com> > > > > > wrote: > > > > > > > > > > > Hi, everyone. > > > > > > I'm performed a Informix 11.5FC7WE install on Red Hat 6 Linux > . > > > > > > The > > > > machine > > > > > > I'm using have 4 procs and I want to use 3 of then in > Informix > > > > > > (VPCLASS cpu).Since the first time I tried to put my server > up > > > > > > (online) I could > > > > see > > > > > > in > > > > > > online.log the message > > > > > > Affinitied VP "1" to phys proc 0Affinitied VP "3" to phys > proc > > > > 0Affinitied > > > > > > VP > > > > > > "4" to phys proc 0Affinitied VP "5" to phys proc 0 I think > the > > > > > > informix VPCLASS are "affiniting" every single CPUVP to the > > > > > > same physical processor. Almost all CPU I have are idle. HGow > > > > > > can I disabled affinity in this version, once I don't have > the > > > > > > AFFINITY > > > parameters ? > > > > > > Thanks a lot > > > > > > André Luiz Rufino > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ******************************************************************** > > > *** > > > ******** > > > > > > Forum Note: Use "Reply" to post a response in the discussion > > > forum. > > > > > > > > > > > > > > > > > > > > > > --bcaec51a74b49efc45050fec4b5e > > > > > > > > > > > > > > > > > > > > > > > > > > > ******************************************************************** > > > *** > > > ******** > > > > > Forum Note: Use "Reply" to post a response in the discussion > forum. > > > > > > > > > > > > > > > > > > > > > > > > > ******************************************************************** > > > *** > > > ******** > > > > Forum Note: Use "Reply" to post a response in the discussion > forum. > > > > > > > > > > > > > > --047d7b10ce3d251597050fee251e > > > > > > > > > > ******************************************************************** > > > *** > > > ******** > > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > > > > *********************************************************************** > ******** > > Forum Note: Use "Reply" to post a response in the discussion forum. > > > > > > --001a1142dc0cf8e02d050fef3a20 > > > *********************************************************************** > ******** > Forum Note: Use "Reply" to post a response in the discussion forum.