Re: I-NET error 25528 - also, what options for starting sqlexecd?

junet@informix.com (June Tong) wrote: >Noble Systems Corporation (noblesys@atl.mindspring.com) wrote: >: SCO OpenServer 5 Enterprise with Release Supplement 5.0.0d >: Informix I-Net 4.12.UC1 >: Informix SE 5.03.UC1 > >: We recently installed I-NET on the above system(s). While it works >: very well, we are getting the following messages in the sqlexecd log >: file: > >: 25528 The sqlexecd daemon cannot accept a connection.: An event >: requires attention > >: I suspect that it is a SCO TCP/IP problem, but I'm not positive. > >Could be related to some SCO kernel parameters (relating to TCP/IP): >NSTREAMS, NUMTIM, NUMTRW, and/or STRMSGSZ. In order of my understanding :) > >STRMSGSZ - stream message size - limits the size of the message, so if you're > using 4096 (default message size on SCO), you'll get an error (-25528) if > you try to select a row >4096 bytes. You should increase this to at least > 20000 (the max Informix will use; SCO max is 32767). >NUMTIM/NUMTRW - some resource for TLI buffers (pretty vague, huh?). Increase > these to 1000 (the maximum). >NSTREAMS - number of streams (I think). Try increasing this, but I don't know > from what to what (the ultimate in vague). > >June (can you tell networking, esp. on SCO, is not my forte?) To verify whether you need to increase any of those parameters use the _strstat_ command of the _/etc/crash_ utility (no underscores). Example: unix-prompt$ /etc/crash > strstat Catalin -- ========================================================================= Catalin Badea _/_/_/ _/_/_/ _/_/_/ _/_/_/ _/ _/ _/_/_/ _/ _/ _/ _/ _/_/ _/ Senior Technical Architect _/ _/_/ _/ _/_/_/ _/ _/_/_/ _/ _/ _/ _/ _/ _/ Tecsys Inc. _/ _/_/_/ _/_/_/ _/_/_/ _/ _/_/_/ ===== cat@tecsys.com =========== include system "disclaimer.4gh" ===== == http://www.tecsys.com ==