DOS16M.

Reply to Michael Kuhn From message dated: < Date: Fri, 4 Dec 92 01:42:16 -0500 < From: rhlab!kuhn@uunet.uu.net < Message-Id: <9212040642.AA26941@relay1.UU.NET> < Received: from rhlab.UUCP by uunet.uu.net with UUCP/RMAIL < (queueing-rmail) id 014158.23956; Fri, 4 Dec 1992 01:41:58 EST < To: uunet!saad-emh1.ARMY.MIL!maint72@uunet.UU.NET < Subject: Re: DOS16M Error. < In-Reply-To: your article <1fjaukINN2ej@emory.mathcs.emory.edu> < News-Path: uunet!europa.asd.contel.com!emory!emory!not-for-mail < I did not supply enough info. < The disk label has IBM PS/2 series on it. I was told that this < means for any 286/386 machine. I do not know why they put this < on the label. Rel 1.10.06E is for any 286/386. < DOS16M=10 which is the recommended setting on the 286 that the < program fails on. The PMINFO program supplied indicates the setting is < correct. Looks good so far, but I was refering to the Model Number of your PC, not what was written on the cover of the disks. < Program fails when getting out of < MENU < . < . < command "Exit" < exit menu < < return Based upon what has been shared above you may need to add the following line: end menu. MENU . . command "Exit" exit menu END MENU < RETURN is to a routine which display another < MENU < . < . < etc < The menu is never displayed. Sometimes you can go through the <logic a couple of times before it fails. Instead of using RETURN to execute another menu try CALL another_menu() as another function. To my understanding the RETURN statement is used to leave a function and return to the calling routine; MAIN, FUNCTION, REPORT. In a submenu it could work to "Return" you to the main menu. < Other parts of the program that have more selects and more < complex seem to work fine. I hope this sparks some light of success, so many time I find myself gropping in the dark of informix 4GL. Michael S. Gordon Foreman, Gyroscope Section Avionics Division * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Michael Gordon Sacramento Army Depot * * Foreman, Gyroscope Section Directorate For Maintenance * * E-Mail: maint72@saad-emh1.army.mil Attn: SDSSA-MAV-320 * * DSN: 839-2367 Michael S. Gordon * * Comm.: (916) 388-2367 Sacramento, CA 96813-5036 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *