Oninit® Archive
Results for “onstat -g sync”
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
IBM Informix 14.10 vs HCL OneDB 2.0.1 sysmaster schema
Art and David, If as Art states the latest HCL OneDB version marries up with Informix 14.10. FC4 then I have my answer. [ informix@informix-01 ] ~/server > onstat - HCL OneDB Server Version 2.0.1.3 -- On-Line (Prim) -- Up 55 days 07:49:25 -- 111462948 Kbytes HCL OneDB 2.0.1.3 pre…
Odd restore failure
Andreas: Thanks for expending brain power on this for me. Yea, onstat -g arc shows what's expected, the last onbar level 0 and level 1 archives which were both full server archives. Also, as you note, both my ontape archive and ifxclone runs were full server so that's not it. Her…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
Repliction Checking
Dan, IMO not really much you can do other than rely on HDR/RSS faith along with instance monitoring (onstat -g dri , DRLOSTANDFOUND and ALARMPROGRAM). If really concerned consider periodic HDR refreshes if feasible. CDR has cdr check, maybe a feature request for something simil…
Take Primary and RSS down and up, w/o reinitialize
David, You should be ok taking either one offline to do non-database work. Before taking them down run onmode -c norm on the primary to force the checkpoint so they are in sync. Also check onstat -g rss verbose on the primary to make sure the RSS server is not way behind. Look …
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
RSS sync problem 3 pages left in rootdbs
Dear All, Running a production db IDS11.7FC4 on AIX 7.1 Have 2 RSS servers one of them real time the other with 1/2h delay Today I had a problem, I ended up on the production site with 3 free pages on the production server. The RSS sync that has no delay was stopped. I did re…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
HDR - after pri upgrade 12.10.FC2 to 12.10.FC4W1
castelo@primary:fnunes-> onstat -V;onmode -b IBM Informix Dynamic Server Version 12.10.FC4W1 Software Serial Number AAA#B000000 You may only revert IBM Informix Dynamic Server to IBM Informix -OnLine Version 7.31.UC1 or later: Use 'onmode -b 7.3' to revert to 7.3x. Use 'onmode …
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Logical log size
Larry, You mentioned remote HDR, are you running sync or a-sync mode? If your primary shows Logical Log buffer waits "G" in onstat -u then you may want to increase the OFF_RECVRY_THREADS on the secondary to 3 or 4 times the number of CPU vp on the primary. Your will also want to…
Check progress of an ER replicate sync in 11.50.FC
Onstat -g rcv full on the target system Sent from my iPad > On Apr 5, 2014, at 8:33 PM, "MARK UNDERWOOD" <munderwood786@gmail.com> wrote: > > We have IDS 11.50.FC3(No fix packs). I'm syncing some replicates on tables > with over 18 million records. Anyone know of a way to check…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
ER queue data
get onstat -g stk on each of the servers. We want to focus on the data= sync (CDRD). M.P. = From: "FRANK" <yunyaoqu@gmail.com> = = To: ids@iiug.org, = = Date: 10/02/2013 02:18 PM = = Subject: Re: ER queue data [31578] = = Sent by: ids-bounces@iiug.org = = Paul, The …
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Strange HDR behaviour
Can you keep track of the servers' sync status day-to-day using onstat -g dri? Are they remaining in sync between restarts? How to you shutdown the secondary? Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: …
Re: Best practices for IDS on virtual machine?
Hi Art , Hmm... I would like to disagree with you... but before that I will do the write test. What I remember from tests did on the past (studying about this behave) I conclude the write I/O throughput bounds will be "defined" from the Linux kernel dirty buffers flush/sync para…
Enterprise Replication recovery slow on Solaris
What is the output on the target of onstat -g ath onstat -g rcv full If there was a large backlog on the source node, then most of the transactional backlog would be in stable storage so there could be an i= ssue with reading the replicated transactions from disk. What is the on…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Informix 11.70.FC4 (Innovator-C edition) crash on Linux
On Tuesday, December 18, 2012 3:43:34 AM UTC-6, checc...@libero.it wrote: <stuff cut> > > The architecture is composed by 2 nodes only: one (primary) replicate some tables on a secondary-server // the replication is mono-directional. Can the message below be related to the panic?…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
migration checklist 7.31 to 11.7
Art: Thanks for the notes... I'm getting a bit more confident that the small scale, SQL stuff for site specific jobs won't be that big of an issue (as long as the OS and environment doesn't change that much without the developers telling us). FYI I found a migration presentatio…
CDRTIME column with NULL value
Hi, We are using Informix ER replication in a 2 node setup. We need to periodically check if a replicated table is in sync. We do this by verifying that the count(*) and max(cdrtime) for the table matches between the 2 nodes when there is no (insert/update/delete) activity on th…
HDR: ASF Echo-Thread Server error
Hello All, Primary - IDS 11.50.FC8W2 on HP-UX 11.23, 12 cores, IDS memory - 48G Secondry - IDS 11.50.FC8W2 on HP-UX 11.23, 04 cores, IDS memory - 40G 2 SDS nodes(updatable) DRAUTO 0 DRINTERVAL 15 DRTIMEOUT 90 Things were working fine until two days back we started getting foll…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
HDR secondary move
On Oct 21, 6:44 am, Jose <joseph...@gmail.com> wrote: > Dear All, > > We are moving a server having Informix secondary server from one data > centre to another. It is a 5 day process. > > Version 7.31 , OS HP-UX 11.11 > > While bringing up the Secondary instance I will check the …
Setting up HDR - 11.50.FC1
----- Original Message ----- From: "TRI TRINH" <tri_trinh@hotmail.com> To: <ids@iiug.org> Sent: Tuesday, August 24, 2010 9:05 AM Subject: Setting up HDR - 11.50.FC1 [21030] > Hi, > > I am trying to setup HDR in two Linux servers inftest1 and inftest2. I > followed the instructio…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
RSS Appears to stall ?
Lello, Nick wrote: > Here�s an odd one� > > > > We have 4 servers, all Solaris Sparc 64bit --- 2 in site A, 2 in site B > > > > Site A contains a Standalone Server S1 and RSS node S2 > > Site B contains RSS nodes S3 and S4 > > > > S2 and S4 stay nicely in sync with S1 ; S3 RS…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Instance Ignoring Onmode Commands
You will have to force it to crash. Get everyone off the instance, then wait until just after a checkpoint (to minimize recovery time) and kill -15 the master oninit (CPU VP #1) and the ADM vp - see onstat -g glo for the pids of these processes. Then you should be able to use onm…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
Fwd: Migrating from IDS 9.40.UC6 to 11.50.UC3
Alexander, Sent you some ideas and an updated copy of dostats.ec that has the latest 64bit fixes. If you don't get that, email me directly. Art Art S. Kagel Oninit (www.oninit.com) IIUG Board of Directors (art@iiug.org) Disclaimer: Please keep in mind that my own opinions ar…
Migrating from IDS 9.40.UC6 to 11.50.UC3
On Apr 5, 3:18 pm, bluexn...@googlemail.com wrote: > onstat -g ath ? > > onstat -g stk all ? > > What IS going (on)? Thank you for replying. I was able to successfully convert database by re-running whole proccess once again. I'm not sure what went wrong diring first attempt. Th…
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
ER Error Enterprise Replication
bozon wrote: > Enterprise Replication is giving the following message when I do a > simple cdr list server > > ndl12:ndl12a common_reporting$ cdr list server > SERVER ID STATE STATUS QUEUE CONNECTION > CHANGED > --------------------------------------------…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Re: HDR Problem, AIX5.2 IDS 9.40.FC5
On Dec 17, 4:04 pm, ruediger.pa...@t-online.de wrote: > Hi, > we have a strange HDR-Problem: > OS AIX 5.2 ml 4.0 > IDS 9.40.FC5 > > The system has been working without big problems for a long time. > For synchronisation we have a fast cross -link-connection seperated > from user…
HDR Problem, AIX5.2 IDS 9.40.FC5
Hi, we have a strange HDR-Problem: OS AIX 5.2 ml 4.0 IDS 9.40.FC5 The system has been working without big problems for a long time. For synchronisation we have a fast cross -link-connection seperated from user connections. Normal Checkpoint duration is some seconds. Sometimes …
Re: Moving a chunk - a related question
Hi, thanks very much for the responses. I did indeed re-link the down primary chunk to a new device and used onspaces to bring that chunk back online. (I had already tried that in the first place and got "Chunk does not exist" errors - which is why I thought I couldn't do it, but…
Re: Moving a chunk - a related question
On Nov 28, 8:28 am, "Rosie Rhodes" <rosem...@spider-networks.net> wrote: > Hi, > I'd like to ask a question about this method (at the risk of appearing > dim) - but in relation to having a broken disk affecting a primary chunk of > a mirrored pair. You're working too hard. If a…
Replication question
UPDATE - The engine went into DDR Block mode again - taking down all my systems (again...) This time I restarted the engine, cdr stop on both servers.. then when I started cdr again, the snoopy and replay position appeared to be correct, and they were 'moving'. However, I am …
Re: HDR recommendations
On Aug 25, 3:41 pm, Madison Pruet <mpru...@verizon.net> wrote: > mohitanch...@gmail.com wrote: > > On Aug 25, 4:12 am, Madison Pruet <mpru...@verizon.net> wrote: > >> mohitanch...@gmail.com wrote: > >>> On Aug 24, 4:15 pm, Madison Pruet <mpru...@verizon.net> wrote: > >>>> mohitan…
HDR recommendations
mohitanchlia@gmail.com wrote: > On Aug 24, 4:15 pm, Madison Pruet <mpru...@verizon.net> wrote: >> mohitanch...@gmail.com wrote: >>> On Aug 24, 9:59 am, Madison Pruet <mpru...@verizon.net> wrote: >>>> mohitanch...@gmail.com wrote: >>>>> On Aug 23, 8:45 pm, Madison Pruet <mpru...@v…
RE: Enterprise Replication question
The output looks fine (I've set it up for five minutes) as below but the transactions are still coming back VERY fast (each second or two) I've included date stamp and current record data from the target table on the central server - as you can see it's pretty much immediate up t…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
onstat -u and IDS maximum concurrent sessions
I keep out IDS test environments instances in sync by bringing over the latest level-0 OnBar archive and doing a cold restore. When I issue an onstat -u the output reports the maximum concurrent at the bottom. My question are as follows. Is the maximum concurrent reset during r…
snapshots of db disks on SAN
We use the EMC with Informix9.4.fc5 on Solaris and sucessfully use mirror copies. We sync up the mirrors between two EMC units and once in sync we issue the onmode -g block then break the connection then issue the onmode -c unblock. We have used thes copies in test but also as ou…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Running HDR across MPLS WAN
Hi all, This is my first post. I am somewhat new to Informix, but hopefully I can get this right. We are evaluating the HDR feature of Informix as a method for DR for a warehouse distribution application. We have 19 distribution centres - each DC runs within a single database, …
RE: ER Problem
Madison Thanks for replying. Raised a support call on this as well (73443.999.866). Sent some log detailsas requested, but onstat -g ath wasn't asked for. Support suggested I ran cdr stop, cdr start on the target which I duly did and all is now running satis. Replicated rows app…
ER Problem
what threads are on the target? (onstat -g ath). "Simmons, Keith" <keith.simmons@office2office.biz> wrote in message news:mailman.190.1148985278.19084.informix-list@iiug.org... All ER on AIX 5.3 IDS 9.40.FC6 replicating (source to target) selected tables to Solaris 5.8 IDS 7.3…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
OnBar error.
Good morning all, thank you for your responses on my last posting, I am currently trying all the suggestions out and will get feedback for you shortly. Related to the unexpected No Response error from OnBar that stops the Continuous logging( I have a suspicion that this has to …
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Re: informix restore
Right. When you do a cold restore (of everything), then it will ask about log salvage (at least when it is finding the logs themselves, which depends on some internal information being available). This is sensible (or necessary), because with this kind of restore you are about t…
Re: informix restore
I saw it asking (pretty sure about it) to backup logical logs when you do a full restore not just one dbspace. Or at least I cannot remember asking for backing up logs when I did a dbspace restore On 5/30/05, Martin Fuerderer <MARTINFU@de.ibm.com> wrote: > Hi, > > my testing wi…
Re: informix restore
Hi, my testing with 9.40.UC6 did not exhibit this behaviour, i.e. it did not ask for log salvage. Instead it simply stops after physical restore of the down dbspace, because I had to say "n" when it asked for logs to restore as I had not backed them up yet. Also, saying "y", bu…
Re: informix restore
I did a cold restore and worked as a charm. Thank you so much. When I restore just a dbspace you are saying that I need to restore the logical logs as well. One more question: Let say that the last backup ontape -s and ontape -a was done last night at midnight. Now I need to re…
Re: informix restore
Hi, if I understood you correctly, then you did a so called "warm restore" of this one dbspace ? I.e. the database server was still running with all other dbspaces being OK ? In that case you have to restore logical logs. The logical logs need to be applied to this one restored …
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Re: onmode could not block server. (Why?)
Hi, I assume that the server in question really didn't get blocked, right ? (That's why I asked for the status header line of "onstat -m" output (or "onstat -" ouput) to be sure, but that's missing in your e-mail ...). It seems likely that you've run into known problem PTS-B 1…
Re: onmode could not block server. (Why?)
Hi! I've found the error. I restarted the INFORMIXSERVER presto1 and Informix@S0221849> oninit Bad Primary Chunk '/local/db/presto1/ifx_presto1_utb_01'. Informix@S0221849> onmode -c block onmode could not block server. After removing the dbspace with the primary chunk '/local/…
Re: onmode could not block server. (Why?)
Hi, any messages in the server's message log ? Output of "onstat -m" (including the status header line) ? Regards, Martin -- Martin Fuerderer IBM Informix Development Munich, Germany Information Management owner-informix-list@iiug.org wrote on 15.02.2005 15:28:10: > Hi! > > I …
RE: onmode could not block server. (Why?)
Are you currently running a DB backup? You can't block if that is going on. -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Christian Eriksson Sent: Tuesday, February 15, 2005 8:28 AM To: informix-list@iiug.org …
onmode could not block server. (Why?)
Hi! I want to block the server with "onmode -c block" and then sync and detach a plex in Veritas Volume Manager. I have a problem with blocking the server: Informix@S0221849> onstat -V IBM Informix Dynamic Server Version 9.40.FC3 Software Serial Number AAA#B000 000 Informix…
Re: replication between 9.2 and 9.4--help me!!
mpruet@comcast.net (mpruet) wrote in message news:<40676184.0410121229.52ed3d6c@posting.google.com>... > Do you have a case number? If so - what is it? > > > What is the OS of the central root server? > > What was the bug that tech support said was the cause of the problem? > We…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
RE: Very old page bug
'rk' I'm going to chip in from your original post as subsequent ones seem to muddy the waters as I understand the situation. First. The bug is 101062 and can be confirmed by using 'onstat -g ath' to get the session id of the ontape process then 'onstat -g stk <session id>' and l…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: Re: CKPT REQ - Blocked:CKPT
No .. don't do that ... I would suggest bouncing the SECONDARY and seeing if both servers sync up or not ... otherwise you'll have to do the physical restore to re-establish HDR again from scratch ... Thanx much, Rajib Sarkar Advisory Software Engineer (RAS) IBM Data Management…
Re: Re: CKPT REQ - Blocked:CKPT
Rajib, I have the same problem when I restored my latest backup to the Primary. Can I just kill this user session that has the flag -X? Thanks fo your help. P.S. I can ping my secondary so my network connection seems to be good. Originally posted by Rajib Sarkar > This means…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
HDR performance question!
Hi, when I am runnig my sync HDR on 940UC2, I have a lack of speed in some cases. When I am disable HDR it is fast again. There is no long checkpoint in online.log and I have a dedicated 1 gbit between the systems! And I am not able to give you an sql statment or so, cause if …
RE: replication
from tomL > Hello, > Is there a command that will return what type of replication is being > run? > > also, what is the best way to check that replication is in sync? > i have run onstat -g dri but this seems to only tell me if it is > turned on/off and the LAST DR CKPT values d…
replication
Hello, Is there a command that will return what type of replication is being run? also, what is the best way to check that replication is in sync? i have run onstat -g dri but this seems to only tell me if it is turned on/off and the LAST DR CKPT values do not match between prim…
Re: CKPT REQ - Blocked:CKPT
This means that the instance is waiting on a CHECKPOINT to complete. From the info..it looks like an HDR pair where the Primary is waiting for the Checkpoint to complete. check the onstat -u output and look for flags -X- on any of the sessions, which means this session is in a c…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
deadlock
--- Vineet Mehrotra <vin_us@yahoo.com> wrote: > Hi You can figure out the deadlock using > onstat -g ppf > and then look for the records where dlks is more > than > 0 and then identify the tables involved using > sysmaster database. I mean take the partnumber out > from that dlk …
rootdbs full for IDS 9.3
the utility is onsmsync ..:-) Thanx much, Rajib Sarkar Advisory Support Engineer (Wells Fargo Bank) IBM Data Management Group Ph : (602)-217-2100 Fax: (602)-217-2100 As long as you derive inner help and comfort from anything, keep it -- Mahatma Gandhi Mark Scranton/Denver/ To…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: Update staistics Running Way Slow
William Rice wrote: > > >===== Original Message From "Mark D. Stock" <mdstock@mydas.freeserve.co.uk> > ===== > >Sanjeev sagar wrote: > >> > >> This is a multi-part message in MIME format. > >> --------------FBF95EAB01AE2EFCAE40C116 > >> Content-Type: text/plain; charset=us-ascii …
RE: Update staistics Running Way Slow
>===== Original Message From "Mark D. Stock" <mdstock@mydas.freeserve.co.uk> ===== >Sanjeev sagar wrote: >> >> This is a multi-part message in MIME format. >> --------------FBF95EAB01AE2EFCAE40C116 >> Content-Type: text/plain; charset=us-ascii >> Content-Transfer-Encoding: 7bit >…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
Enterprise Replication Problems on Linux Redhat 6.1
Well, I worked with some of the Linux Platform Engineers during the testing of 9.21, so I guess that I qualify for having run 9.21 ER on the Linux platform. The error that you are getting occurs during the commit of the DataSync transaction on the target system. (The DataSync t…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Enterprise Replication - Questions on monitoring Replication
First of all --- I hope that you are on 7.31 or are considering moving to 7.31. For ER it is proving to be far superior to prior versions. Secondly, we are currently working on a web-based monitor tool to replace the old ER GUI. This should make monitoring much easer than befor…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Re: Marking a DBspace as down
viegasjp@panasonic.com (Viegas, John Paul) wrote: > >Hello, > We are trying to test a single dbspace restore with ONBAR, but we are >having trouble marking that dbspace as down. We are using raw > partitions, or else we would just delete the dbspace file in the >appropriate fil…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: DSA follies
In article <5jjr7f$gjp@cssun.mathcs.emory.edu>, David Coburn <David_Coburn@wvccg.wvus.org> writes > > > > >Hi. I've been fighting now for two months with a problem. I'm hoping >that somebody else has run into a similar problem and has a >workaround. > >I have an ESQL/C program …
DSA follies
Hi. I've been fighting now for two months with a problem. I'm hoping that somebody else has run into a similar problem and has a workaround. I have an ESQL/C program that declares a cursor with hold and then performs an inner loop to do some updates to various other tables. Th…
Re: 7.22.UC1X2 Performance tuning questions....
I have been following this discussion with interest (any site which has 1GB RAM is always interesting). In article <5i0kv8$t6v@cssun.mathcs.emory.edu>, tony.edwards@bellsouth.co.nz (tony edwards) wrote: >We set the check point interval to 600 and I have checked the productio…
Re: Mirroring
In article <3313D72E.77A70447@www.weideneder.de>, Stefan Weideneder <stefan@www.weideneder.de> writes >cburton@gte.net wrote: >> >> I am currently on 7.11.UC1 on HP-UX 9.04 >> >> To experiment (before implementing), I created a mirror of the >> root_dbs. Both the root and the mi…
Re: Mirroring
Chris, I had the same "problem" here, to simulate a device error I had to have my sysadmin physically pull the disk out, quite a simulation :) Once the link is resolved informix will not recognize the rm of the link until it needs to resolve it again (when you bounce t…
Re: Mirroring
cburton@gte.net wrote: > > I am currently on 7.11.UC1 on HP-UX 9.04 > > To experiment (before implementing), I created a mirror of the > root_dbs. Both the root and the mirror are seperate logical (and > physical) devices. The links to the devices were created in > /usr/informi…
Mirroring
I am currently on 7.11.UC1 on HP-UX 9.04 To experiment (before implementing), I created a mirror of the root_dbs. Both the root and the mirror are seperate logical (and physical) devices. The links to the devices were created in /usr/informix/dev. t_root_dbs and t_root_mir A…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…