Oninit® Archive
Results for “NS_CACHE”
Not enough room in ROOT DBspace
Reduce the size of your PHYSFILE. You probably moved it to another dbspace after setting up the first server. Start it smaller, then create the plog dbspace and move it there and resize. j. On 1/4/17 4:09 PM, STEVEN AB wrote: > Hi, > > I'm trying to setup a new server with the …
DB taking delay of 15 min to get connected.
Hi Edcel, Thank you for the swift response, could you please let me know where I can find the configuration parameter NS_CACHE ? Thanks, Siddharth…
Ifx 14.10 - DNS outage strategy ?
As far as I know the HOST part of NS_CACHE serves both name-to-ip and ip-tp-name resolution purposes, so temporarily setting host=<really_high_value> probably should get you over such DNS maintenance window, provided that no client connects that hadn't connected yet before, i.e. …
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Bizarre CM/Connectivity Issue on 12.10.FC14
One new item in the version, actually in FC13, is the sqlhosts cache, part of NS_CACHE config. It should be on by default, same 900 seconds as all the other 'name resolution' caches -> check 'onstat -g cfg [full] NS_CACHE' You might want to turn this off and see whether this make…
Informix DNS Warning
In case of network not changing frequently and only a known set of applications, from known set of hosts, connecting to Informix, you might want to be more independent from DNS (and maybe temporary glitches) by taking advantage of DNS caching which can be done on OS as well as on…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Checkpoints statistics
Hello. What kind of cluster do you have? HDR? SDS? RSS? Seems you might be facing lag on primary because of misconfigured cluster. Is this a new installation, or an old one? Was it recently upgraded? Please send us some outputs: 1) onstat -g cluster 2) onstat -c What is your…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Re: HDR Question
I think David already pointed it out: one diff between 11.50 and later is Informix's own name caching (s. NS_CACHE onconfig param). Maybe this is playing tricks on you. -> retry your testing with this feature disabled: onmode -wm NS_CACHE=host=0,service=0 From: "BENJI LONG" <rug…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
HDR Implementation
There is something wrong in your setup. The state of the secondary should not be Quiescent. The state after a ontape -p restore is always "fast recovery". After executing onmode -d secondary <primary name> the state will switch to Read-Only (sec). First, make sure the sqlhosts …
Question on tuning
Larry: That's what I was afraid of. The T5240 is a dual socket system sporting UltraSparc T2+ processors. These T-class processors were designed in the last days of Sun Microsystems with the specific purpose of running Web apps and Java programs quickly. These highly threaded pr…
IO performance issues
Michael: FWIW, your other post (with onstat -g mgm) doesn't tell us anything useful except that the server's been online for 11 days and 18 hours or 282 hours. Assuming you have not zero'd your stats since startup, I can calculate a rough Buffer Turnover Rate (BTR) across the tw…
dbaccess dbname hangs for seconds
It's not clear to me: "netstat -a" shows small hangs? On Fri, Aug 12, 2016 at 1:54 AM, CHALLENGER212 ABDERRAFI < abderrafi212@gmail.com> wrote: > ok, but Why today, I have the same problem 3 months ago and it was because > of > a long request which generate realocating memory s…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
new features about dynamic parameter added in 12.1
Attention, this is not documented. For Informix 12.10, another way you can get the list is to use the cf_flags column on syscfgtab to determine which onconfig parameters are dynamic: SELECT cf_name FROM sysmaster:syscfgtab WHERE bitand(cf_flags,'0x1') = 0 --removes Unsupported p…
password is not correct for the database server
Hi, Do you think I can just comment out the NS_CACHE parameter?…
Performance issue after migrate to IDS from Online
Questions: 1. After the database was recreated and loaded did you run the recommended suite of Update Statistics commands as described in the Performance Guide manual (or as implemented by my dostats utility) or are you depending on Auto Update Statistics (AUS)? 2. So, you m…
Fetch time on 12.10FC4
Hi Javier! Did you rebuild the statistics of all databases from your instance after the upgrade? This situation (differences between fetch time and exec time) used to happen when table's statistics are not accurate. Regards, Alberto Pessonio 2015-05-15 18:35 GMT-03:00 JAVIER P…
Intermittent DNS failures
It's a well known problem with Informix... or as you correctly put it, with DNS that impacts Informix. Both suggestion I've seen are interesting (ncd daemon and the ns_cache parameter). Unfortunately you cannot consider the later one (you should be aware that 11.1 is out of suppo…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
sqlhosts file
Art, Do you know if IDS does any caching of sqlhosts or does it reread sqlhosts for every new remote connection? Whilst IDS 12 does have NS_CACHE for caching OS lookups there is nothing for sqlhosts caching. IBM, Checking the onstat -g env documentation for IDS 12.10 it menti…
Informix Database testing
OK, these are the two important messages during the startup failure: This first one is warning you that there is a shared memory communications file in /INFORMIXTMP which seems to indicated that there is another running instance on this machine using the onipcshm service name "i…
IDS 12.10 - dbimport very slow
Hi Markus, Is your import logged ? Regards, Henri MOUKOURI Le 25 juin 2013 à 10:45, "MARKUS BRINKBäUMER" <markus.brinkbaeumer@gmail.com> a écrit : > Hello, > > we have a new server (Windows 2012, 8 GB RAM, 4 x 600 GB SAS 15k HDD). On the > server we have installed an IBM Inf…
IDS with GSSAPI SSO
Hello. I think your steps are just fine... so I would suggest you to disable your NS_CACHE in Informix (11.70): onmode -wm NS_CACHE=host=0,service=0,user=0,group=0 And test again, if everything is fine, you may want to restart your cache, to avoid any possible issue. Hope it h…
Performance Tuning Discussion
Ok it seems you have a big hardware, what´s your Informix version? What´s your box architecture? For performance tips, there is a good article in Andrew Ford´s blog, that should clarify your thoughts.... http://www.informix-dba.com/p/informix-innovator-c-tuning-basics.html This…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Re: IDS 11.7 Tuning help
Thanks John - I do already have the cache set up.. NETTYPE soctcp,40,100,NET LISTEN_TIMEOUT 60 MAX_INCOMPLETE_CONNECTIONS 1024 FASTPOLL 1 NUMFDSERVERS 4 NS_CACHE host=900,service=900,user=900,group=900 I will try increasing the number of listeners for the port... Laurie On …
-952 oddity
This seems to be fixed. We turned off the NS_CACHE as mentioned earlier, moved a user over to passwd and voila, it worked. We could change the password for 4 different users and log in. We had moved a bunch of users from passwd to NIS before this happened and this seemed to hav…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
What are best onconfig parameters for a DSS app
Frank.... first question: Is your database installation being made for a production system???? Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
shared memory not initialized error in oninit -v
Hi, listener-thread: err = -25572: oserr = 49: errstr = : Network driver cannot bind a name to the port. You have named a servername or serveralias, which is not startable as a socket listener. This occurs when you name a specific network interface in sqlhosts and reference it …
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
RE: Changed DNS Server and now database connection is very slow
On Mar 27, 11:24 am, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > Right. > > So 900 seconds ~15 minutes. > > Then what's the real problem? > > You make the change, performance takes a hit for the first 15 minutes and the everything is ok. > Now I know that this is a producti…
IDS 7.31UD7 on MP-RAS not able to initialize
I am attempting to initialize 7.31UD7 on NCR MP-RAS 3.2 UNIX on a Dell T410. This release was initially purchased for and installed and is currently running on a NCR 4455 with MP-RAS 3.2 box. The Dell is setup to mirror the NCR box down to the kernel stune, mtune parameters. The…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
How to Monitor Open Connection Tiime???
Hi , I'm working with Miguel on this situation . After some debugs with strace, tcpdump, application log we could confirm the problem is the DNS reverse. But is more of one problem together. Let me try explain what happen here: 1) the database was started and at this moment the…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Riddle me this...
Adaptec just announced a new raid controller card. It has an SSD attached for speeding up cached data. The full article can be found here: http://www.theregister.co.uk/2009/09/09/adaptec_maxiq/ And the neat thing is that its application independent. Here's a quote about its targ…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
server startup
Hi Deba After reboot your PC, probably the other application hasn't bind to 9088 port yet so IDS can bind to it now. On windows, the services file is under C:\\\\WINDOWS\\\\system32\\\\drivers\\\\etc\\\\services. You may directly edit the this file to change the port number of …
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
=?GB2312?Q?China_Pet_Products_=A6=F4__www=2Eskpetproducts=2Ecom____=A6=F4?= =?GB2312?Q?Pet_Products_in_China?=
China Pet Products �� www.skpetproducts.com ��Pet Products in China Search ResultsChinaPets.com - China pet product manufacturer directory, Pet ...ChinaPets.com: China Pet Products Manufacturers, Suppliers, Factories, Companies, Exporters & Importers ChinaPets.com is a B-2-B …
=?GB2312?Q?China_Pet_Products_=A6=F4__www=2Eskpetproducts=2Ecom____=A6=F4?= =?GB2312?Q?Pet_Products_in_China?=
China Pet Products �� www.skpetproducts.com ��Pet Products in China Search ResultsChinaPets.com - China pet product manufacturer directory, Pet ...ChinaPets.com: China Pet Products Manufacturers, Suppliers, Factories, Companies, Exporters & Importers ChinaPets.com is a B-2-B …
=?GB2312?Q?China_Pet_Products_=A6=F4__www=2Eskpetproducts=2Ecom____=A6=F4?= =?GB2312?Q?Pet_Products_in_China?=
China Pet Products �� www.skpetproducts.com ��Pet Products in China Search ResultsChinaPets.com - China pet product manufacturer directory, Pet ...ChinaPets.com: China Pet Products Manufacturers, Suppliers, Factories, Companies, Exporters & Importers ChinaPets.com is a B-2-B …
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Re: shared memory not initialized
Thanks Andreas, The system is resolving the host name fine. uname -n reports informix. when i ping informix, i get a reply from the correct IP, 192.168.26.66 Still no luck Tom On Aug 9, 4:55 am, Andreas Breitfeld <abrei...@de.ibm.com> wrote: > Maybe my hint regarding the 'set…
shared memory not initialized
I have just installed Informix 10 on a CentOS 4.5 system. When I run oninit -v to start the dbserver, I get the following, and then it dumps me back to bash: [root@informix informix]# oninit -v Your evaluation license will expire on 2007-10-30 00:00:00 Checking group membershi…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
HOW-TO setup block devices with O_DIRECT on RHEL5
I was looking for the information on how setup and use Informix block devices on Red Hat Enterprise Linux 5, since that OS version discontinues raw devices. I have found no document that entirely fulfilled my needs, so I've investigated by myself and figured out the solution. Si…
Server fails to come online
Check the sqlhosts files and see what port is being used. Then check you /etc/services file to make sure that the port is defined similar to below: $INFORMIXDIR/etc/sqlhosts mydb onsoctcp 192.10.10.10 1526 /etc/services mydb 1526/tcp # Informix listener Lennie -----Original…
Re: Memory leak on AIX 5.3
Please look at the APAR's already supplied (All memory leak issue IBM provided me are listed below, some are fixed) as AIX has at least a few issues with memory access issues. Also if you notice the Service Pack was not completely installed. Other wise your server would return "…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
RE: Another IDS Feature Request
Konikoff, Rob (Contractor) wrote: > Mr. Kagel: > > Keep in mind, I'm not a programmer, but a DBA that writes stuff for the > customer. > > I was always taught to minimize globals, especially in C variants, but > in general, everything. Rob, First, it's Art, please. Noone even …
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Performance Issues
Sue Êched reads now looks OK, don't believe the cached writes ! ,I think the engine is lying. IDS 9.21 is very old, any chance of updating to 9.4? The X in HC6X6 indicates a patched engine, even more reason to upgrade to a more supported version. What are your checkpoints like? …
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
RE: Any assistance appreciated: Dynamic Server Initialisation
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C5004F.74CA2B70 Content-Type: text/plain; charset="iso-8859-1" Floyd, Yes, that had been checked. There were no …
Re: Any assistance appreciated: Dynamic Server Initialisation Failure
--0-229833697-1106363026=:39551 Content-Type: text/plain; charset=us-ascii Just a thought Burton, Did you check to make sure there are no oninit processes hung out there ? ps -ef |grep oninit, also ipcs make sure no shm segments are hung. As a last resort, you may also try rebo…
RE: Any assistance appreciated: Dynamic Server Initialisation Fa
Obnoxio, Unfortunately yes, the devices are correct, all of the network details are right, sqlhosts, /etc/hosts /etc/services the installed software is valid and was running prior to the restore. I will recheck everything again, but doubt that is going to yield any gains. Thank…
Re: Any assistance appreciated: Dynamic Server Initialisation
Burton, Clifford said: > > I have a situation where the IDS-731UD4 instance I run on HP-UX 11 is > failing after a cold restore. Are the permissions on your disk chunks OK? Are they the same names as before? Are your Informix binary and library permissions correct? Is your /etc/…
Error initializing the engine
Verify that the host and service are correct in the sqlhosts file and that the service is registered in /etc/services. Also, though the 'service' for onipcshm connections is a dummy it must not be the same as some network connection uses. Best not to use a real servicename at all…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
RE: Infomix monitoring tools
For that matter, you can also have a look at http://www.iiug.org/software/index_DBA.html where there is a shell script called DBAmon which does some basic monitoring. cheers j. > -----Original Message----- > From: Bill Border [mailto:bill_border@agilent.com] > Sent: Friday, Jan…
DISK ARRAY
I use such an array. As Anndrew Hamm said, you'll have to present the 9 or 18GByte logical units you see from EMC as 2 GByte chunks. So, there will be an inherent level of indirection between the way you see the chunks on Informix and their physical position. In my experience,…
FW: Infomix monitoring tools
We at Agilent Technologies (formerly Hewlett-Packard) use a tool called DBAmon. It continuously monitors 323 Instances of Informix, Oracle and MSSQL. It is very inexpensive, but it is more of any availability monitor than Patrol (it does not have all of the Patrol bells and whis…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
RE: Network driver cannot bind a name to the port
unfortunately, on our server rebooting didn't get rid of the files so the problem persists through any amount of reboots. I think the files in /INFORMIXTMP are explained very well in the Administrator's Guide near the back, if anyone's interested in knowing what the engine place…
RE: Network driver cannot bind a name to the port
Dealing specifically with the *-25572 Network driver cannot bind a name to the port* error, we get that whenever our server crashes (i.e. OS crash) without bringing the engine down properly first. What happenes is that some engine files needed for proper network port management …
Network driver cannot bind a name to the port
Installing IDS (WORK GROUP SERVER) 7.31 FC6 (64 bit version) on HP-UX11.0. I tried to initialize using ONMONITOR utility and it doesn't allowed to complete all field inputs. (PERFORMANCE TUNING PARAMETERS SCREEN). I called Informix Tech support, ONMONITOR utility has known bug …
Re: Error building 'sysmaster' database.
Andy, Here is the latest try... Wed Aug 30 09:29:54 2000 09:29:54 Event alarms enabled. ALARMPROG = '/export/home/informix/etc/log_full.sh' 09:29:54 Booting Language <c> from module <> 09:29:54 Loading Module <CNULL> 09:29:54 Booting Language <builtin> from module <> …
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
RE: Slowness
Since nobody else seems to have said anything yet I'll start the ball rolling with a few suggestions. Lets see how many things I miss. First things I noticed are 4 LRUS and 4 CLEANERS for 200 000 Buffers!! Does onstat -m have some fairly log checkpoints ? Second thing I notice…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
RE: Updated Informix Linux install/configuration FAQ?
Thanks, great help...the database is now up and running. However, I'm still stuck somewhere with regards to testing my driver. An ldd of my Informix driver shows: libpthread.so.0 => /lib/libpthread.so.0 (0x40057000) libivmfront.so => /opt/alex/casp/odbc/lib/libivmfront.so (0x4…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
Shared memory as default communic. protocol
1. I would recommend not using the same service name (baan) for shared memory as well as onsoctcp. For shared memory, change the name to something else, like baanshm. 2. What do you exactly mean by "it didn' t work"? Are you getting an error message? Is it connecting but no…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
RE: Raw vs Cooked space?
This still does not change the fact that from the benchmarking we have done we see less than a 3% difference on any job. To be honest, in many cases their was no difference as far as user response time, which is one of the most important factors for us. Good cache rates help any …
RE: Raw vs Cooked space?
The other factor that needs pointing out here is the benefits of using KAIO. KAIO runs on the actual CPUVP's as opposed to the situation in cooked which utilizes AIOVP's which forces the CPUVP's to yield the processor and do the 2nd most costly operation in UNIX: the context swit…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
Re: mutex problem
This is a multi-part message in MIME format. --------------69ECBD1DDB97C4B95865FD24 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Brian. There are a number of bugs that exhibit this kind of failure condition. It may be worth setting AFDEBUG, this wi…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Informix vs. Sybase vs. Oracle vs. (gasp) MS SQL Server
In article <5j09ci$14g@mew.corp.sgi.com>, Pablo Sanchez <pablo@sgi.com> wrote: > >In article <3353A408.F9C85873@strengur.is>, Snorri Bergmann <snorri@strengur.is> writes: >> > Sybase 11.0.X Informix 7.22 >> > ------------- ------------- >> …
Re: OnLine 7.13 performance problems - comments please?
Neil Truby wrote: } } We're running OnLine 7.13 under Solaris 2.4, on a Sparc 20 with 160M of } memory. The load is increasing, and the users are complaining about } performance. } } Here's my onstat -p in the 12 hours since I zeroed the stats: } } Profile } dskreads pagreads bu…
Re: Informix and RAID?
In article <91a7cc$a151c.3a5@news.leg.wa.gov>, test@test.com (Test IT) wrote: > The folks from Informix told me that running Informix on a box in a > RAID configuration is not the best idea. They say that performance > drops. Is anyone running Informix 7.11 or > on a RAID box?…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…