Oninit® Archive
Results for “MAX_INCOMPLETE_CONNECTIONS”
Not enough room in ROOT DBspace
Reduce the size of your PHYSFILE. You probably moved it to another dbspace after setting up the first server. Start it smaller, then create the plog dbspace and move it there and resize. j. On 1/4/17 4:09 PM, STEVEN AB wrote: > Hi, > > I'm trying to setup a new server with the …
Gathering EXTREME amounts of time in %sys CPU
It looks like we found our problem. We run Patrol to monitor our system automatically. When we took a dump tape and sent it to NCR for analysis, the only thing that they found that was running on all cpu's was Patrol. We subsequently turned Patrol off, and the %sys cpu problem…
Cannot connect to Informix database via Python
Yep, 30081 I know as DRDA connection error (https://www.ibm.com/docs/en/db2/11.5.x?topic=errors-sql30081n-tcpip-communication), which is quite expected if there's no DRDA port/listener configured. -> you'll need another listener (DBSERVERALIASES entry) in your onconfig and a rela…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
NETTYPE connections per thread
Hmm, I think I'm getting threads and listeners tangled up. The config is about connections per listener, performance is not affected below 500-700 connections per listener. Per your reply on my other post, the engine will increase the number of connections as required (except for…
DRDA w/SSL
Has anyone here had any luck getting a client connected to Informix using the IBM DRDA protocol over SSL? I opened a case on this some months ago and the DB2 and Informix sides of the fence just kept punting back and forth. Setting up a drsocssl listener on the engine side is sim…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
listener-thread@soc_be.c:3073: err = -25582:
The most likely explanation is a non-Informix connection to your listener. You can replicate this message using "telnet listener_ip listener_port". It might be a caused by a penetration test or similar. Ben.…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Re: HDR Question
930: host name resolution failed (so wouldn't even proceed and attempt to connect, i.e. try and establish a TCP connection) -> you'd get it with e.g. a typo in host name in sqlhosts 908: attempt to connect (here: to establish a TCP connection) failed -> you'd get it with an IP…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Thousands -27001 errors
-25582 errors will be seen in the online log if there is some sort of port scan or a process like telnet connects to your listener. Could this be part of the explanation? Ben.…
IO performance issues
Michael: FWIW, your other post (with onstat -g mgm) doesn't tell us anything useful except that the server's been online for 11 days and 18 hours or 282 hours. Assuming you have not zero'd your stats since startup, I can calculate a rough Buffer Turnover Rate (BTR) across the tw…
IDS and keepalive
Ok.... 1- Increase the LISTEN_TIMEOUT value to around 60 2- Being AIX... and considering you also have the trust issue... (and I assume you restarted the engine or at least the listeners, and that may have triggered the second issue): I suspect because I was told by a colleague o…
dbaccess dbname hangs for seconds
It's not clear to me: "netstat -a" shows small hangs? On Fri, Aug 12, 2016 at 1:54 AM, CHALLENGER212 ABDERRAFI < abderrafi212@gmail.com> wrote: > ok, but Why today, I have the same problem 3 months ago and it was because > of > a long request which generate realocating memory s…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
new features about dynamic parameter added in 12.1
Attention, this is not documented. For Informix 12.10, another way you can get the list is to use the cf_flags column on syscfgtab to determine which onconfig parameters are dynamic: SELECT cf_name FROM sysmaster:syscfgtab WHERE bitand(cf_flags,'0x1') = 0 --removes Unsupported p…
Performance issue after migrate to IDS from Online
Questions: 1. After the database was recreated and loaded did you run the recommended suite of Update Statistics commands as described in the Performance Guide manual (or as implemented by my dostats utility) or are you depending on Auto Update Statistics (AUS)? 2. So, you m…
Fetch time on 12.10FC4
Hi Javier! Did you rebuild the statistics of all databases from your instance after the upgrade? This situation (differences between fetch time and exec time) used to happen when table's statistics are not accurate. Regards, Alberto Pessonio 2015-05-15 18:35 GMT-03:00 JAVIER P…
listener-thread: err = -25580: oserr = 32.......
Frank You need to talk to your network supplier to find out why the connection is interrmittant/very slow and causing the connection loss Keith On 25 March 2015 at 14:49, FRANK <yunyaoqu@gmail.com> wrote: > Guys, > > IDS12.10 FC4 > RHEL > > Recently, suddenly see these error ex…
mongo to JsonListener to informix
Your exception stack is java.sql.SQLException: com.informix.asf.IfxASFException: Attempt to connect to database server (nsofops_tcp) failed. | com.informix.asf.IfxASFException: Attempt to connect to database server (nsofops_tcp) failed. | java.net.ConnectException: Connection ref…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
listener-thread: err = -25573: oserr = 72
:/usr/bin>onstat -c | grep MAX_INCOMPLETE_CONNECTIONS # MAX_INCOMPLETE_CONNECTIONS - The maximum number of incomplete MAX_INCOMPLETE_CONNECTIONS 1024 :/usr/bin>onstat -c | grep LISTEN_TIMEOUT # LISTEN_TIMEOUT - The number of seconds that IDS LISTEN_TIMEOUT 60 Thanks, **********…
Informix ODBC Error: Read error occured during con
On Fri, Oct 4, 2013 at 9:58 PM, SANJIV KUMAR <sanjiv@simple2call.com> wrote: > LISTEN_TIMEOUT 60 > MAX_INCOMPLETE_CONNECTIONS 1024 > > It would take some lost connection attempt to make this a problem... > > Both RHEL and Windows server are at same geographical location connect…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
IDS 12.10 - dbimport very slow
Hi Markus, Is your import logged ? Regards, Henri MOUKOURI Le 25 juin 2013 à 10:45, "MARKUS BRINKBäUMER" <markus.brinkbaeumer@gmail.com> a écrit : > Hello, > > we have a new server (Windows 2012, 8 GB RAM, 4 x 600 GB SAS 15k HDD). On the > server we have installed an IBM Inf…
Performance Tuning Discussion
Ok it seems you have a big hardware, what´s your Informix version? What´s your box architecture? For performance tips, there is a good article in Andrew Ford´s blog, that should clarify your thoughts.... http://www.informix-dba.com/p/informix-innovator-c-tuning-basics.html This…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Connecting to a remote server
I get "12:41:15 listener-thread: err = -27001: oserr = 0: errstr = : Read error occurred during connection attempt." On my client screen I had: Trying... Connected to ksotinfx01.ottawa.edu. Escape character is '^]'. Connection closed.…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
informix not listening on ip and port specified
Hello: I have an informix server that was runnig until power went down and it crashed. When I get put it online my clients can't connect because informix wasn't listening on ipv4, It was listen on specified port but in a ipv6 address. When I discover this, I check host file, sq…
Config Help
Your biggest performance problem is that you are running your server on a VM. IO performance under VMWare is VERY VERY POOR and, as I've said several times already this month, databases live and die on IO performance. Art Art S. Kagel Advanced DataTools (www.advancedatatools.co…
1024 incomplete connections at this time.
Original post: DS Version: 10.00.UC6 OS Level: Sun Microsystems Inc. SunOS 5.10 What's causing this issue and possible fix(es)? ... Response: Well that message is coming from the listener thread doing a comparison that is has (in you case) 1024 incoming connections it hasn't …
What are best onconfig parameters for a DSS app
Frank.... first question: Is your database installation being made for a production system???? Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
Re: 11.70xC3 conversion
The sysmaster database was not rebuilt after the upgrade. There should be a script, buildsmi.bat, probably in %INFORMIXDIR%\\etc. Run that script and it will drop and recreate the sysmaster database to include the new tables that 11.70.xC3 expects to see. Art Art S. Kagel Adv…
11.70xC3 conversion
This is on Windows Server 2008 32 bit. After uninstall if 11.70xC1 and install of 11.70xC3, and changing root space location in onconfig and then a restart, the conversions ran fine except for this: 11:05:48 Conv/rev: Started conversion for component SECURE 11:05:48 *** SECURE …
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Physical Log Size
How did you "increase" the size? You can only do that song onparams. You cannot do that just by changing the Onconfig file Art On Jan 25, 2011 12:10 PM, "KENT GRUNDEN" <k.grunden@hoogwegtus.com> wrote: > IDS 11.50.FC4WE Windows Server 2008 64bit > > I keep getting the message wh…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
How to Monitor Open Connection Tiime???
On Wed, Nov 24, 2010 at 1:47 PM, Miguel Carbone <miguel@mcsoftware.com.br>wrote: > Hi, > > I am having some issues in a new environment we just installed and would > like to ask some tips to monitor the open connection time. > > Informix 1.50 FC7W1GE on Linux RedHat 5.5 > Client…
IDS tcp listening port on RHEL 5
June Nebab LKINY wrote: > I tried different tcp port numbers (ex: tcp 6975; tcp 55001) for my new > IDS 11.7 UC1 GE to listen to on RHEL 5 but i'm not able to connect to it > using OAT or even "telnet hostname portnum". > > service iptables is off > > /etc/services file entry lo…
Config
Just glancing, but your BTR looks a little high. Some config suggestions below. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) IIUG Board of Directors (art@iiug.org) Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on …
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
listener-thread: err = -27001:
Any help on this error? 00:00:39 listener-thread: err = -27001: oserr = 0: errstr = : Read error occurred during connection attempt. 00:10:39 listener-thread: err = -408: oserr = 0: errstr = : Invalid message type received from the sqlexec process.oca Thanks a lot, juan r…
951: Incorrect password or user informix is not kn
Hi, The instance (database server) have the following versions 940FC9 for the one with the connection problem and 940FC6 for the two others. The errors in online.log since today are : Fri May 7 10:07:40 2010 10:07:40 informix password expired 10:07:40 listener-thread: err = -9…
new onconfig parameters added onconfig file 11.5
most of these aren't new at all. Some have been around since 7.10. Some were undocumented until around 9.30 or so. Others were new in 9.40 or 10.00. There are a few really new ones, but, the server upgrade does not, to my knowledge, update the ONCONFIG file at all. Art Art S. K…
Performance degradation over a period
Hi, what do you mean by some period: seconds, minutes, hours, days, months ? Many indexes on the tables ? New tables/indexes, when the application starts ? Regards, Andreas > ------------------------------------------- SPAR Österreichische Warenhandels-AG Hauptzentrale A - 5…
Random Server Slowdown "Redone"
There are some usual things you could do for now: 1) calc your database ratios, I think there are several NETTYPE, BUFFERS and even BTSCANNER options that could be optimized, you could download Mr. Art script to automatically know these important numbers!!! It´s on the download …
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Insert into an indexed table is really SLOW!
MIKE DUNHAM-WILKIE wrote: > I am running into performance problems inserting into an indexed table, using > Informix 11.50. The following timings for loading into > compressed/uncompressed, indexed/non-indexed tables using dbload/HPL-Deluxe > more illustrate the problem. The numb…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
SLA listener failed Connection Manager shutdown
Hi at all! I need help for this: I want to configure connection manager with Configuration File below: NAME cm1 SLA oltp=primary SLA report=HDR FOC HDR,5 SLA_WORKERS 16 DEBUG 2 LOGFILE /opt/IBM/informix/tmp/cm1.log I typed : oncmsm -c cmsm.cfg In the logfile last line appear…
TCP problem upgrade 9.40 to 11.50
Hi Servio, In the sqlhosts, you have ontlitcp, while in the ONCONFIG you have NETTYPE soctcp. In Solaris, we use TLI for TCP communication, rather than sockets (SOC). Can you try just changing the NETTYPE in the ONCONFIG file, to change from 'soctcp' to 'tlitcp', make sure you…
Determining IP of 27001 Error
> > PS Since Mark T. and Serge both read c.d.i, I'd say that this would be > important to both DB2 and Oracle. > Well - Oracle already tracks connected client IP addresses on the database side, via the SYS_CONTEXT session variables. I sort of presume IDS and DB2 do something sim…
Informix Connection Errors
> > Please check version 10 ONCONFIG parameters:> MAX_INCOMPLETE_CONNECTIONS> LISTEN_TIMEOUT> > They were introduced to deal with this AFAIK.> Regards.> > -- > Fernando Nunes This is running on IDS 9.40If these parameters have been introduced to deal with this, does this mean IBM…
listener-thread: err = -27001
If the incoming connection request is being rejected by the listener thread there won't be a session id - the session does not exist yet. Unless you are getting hammered by incoming connection requests or your network is being overhwhelmed by other apps I doubt a second listener …
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Never-encountered-before error
IDS 10.0FC8W2 on HP-UX 11.31: We got these errors this afternoon. Any idea what they might mean? PMR 53773,018,866 refers: 15:51:08 Maximum server connections 107 16:06:19 Fuzzy Checkpoint Completed: duration was 0 seconds, 155 buffers not flushed. 16:06:19 Checkpoint log…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
IDS 10 err = -25580
Hi,everyone The IDS10 always appear "17:35:07 listener-thread: err = -25580: oserr = -1: errstr = : System error occurred in network function. System error = -1. " Someone said it happen because of the configure NETTYPE of $ONCONFIG file. But I really don't know the relation. B…
Configure HDR over dedicated link / interface
mohitanchlia@gmail.com wrote: > Version: IDS 10 > > How to configure Informix to run HDR threads on dedicated link to > secondary server ? As I understand we'll have IP address for this new > Interface Card, but how do we tell informix to send/receive logs over > this link/interf…
RE: IDS Response Problem
Navaid- Your server ran out of shared memory resources. Check your shared memory kernel parameters. You probably need to increase some of them. --EEM ________________________________________ From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On …
RE: IDS Response Problem
Navaid- Your server ran out of shared memory resources. Check your shared memory kernel parameters. You probably need to increase some of them. --EEM ________________________________________ From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf…
IDS Response Problem
Hi All, We are using IDS10 UC5 and receiving following message in online.log. Anybody have any idea about these messages. During this time, no new client was able to connect to the database but previous connections were working fine. I will appreciate if someone can advice me…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
Re: TCP Listeners: Preferences?
> -----Original Message----- > From: david@smooth1.co.uk [mailto:david@smooth1.co.uk] > Posted At: 04 April 2007 19:06 > Posted To: comp.databases.informix > Conversation: TCP Listeners: Preferences? > Subject: Re: TCP Listeners: Preferences? > > > On 5 Apr, 00:10, Tom Girsch <tg…
TCP Listeners: Preferences?
Keith Simmons wrote: > Tom > > TCP connections should always be run on NET VPs and SHM on CPU. There > are many threads on this from about 2002/3 explaining exactly why and > how performance will plummet if you mix them up !! > I just want to verify that this still applies even w…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: listener-thread: err = -25582: oserr = 9: errstr = : Network connection is broken.
On Feb 20, 7:03 pm, "Davorin Kremenjas" <davorin.kremen...@alfatec.hr> wrote: > Some script or similar agent is "pinging" your instance every 5 minutes. > It has no username and/or password so it cannot finish the handshake. > Monitor the Informix port and analyze network traffic…
listener-thread: err = -25582: oserr = 9: errstr = : Network connection is broken.
Every 5 minutes I am seeing the error below in the online log file. However, there have been no complaints from users. IBM Informix Dynamic Server Version 9.40.FC8 13:09:07 listener-thread: err = -25582: oserr = 9: errstr = : Network connection is broken. 13:14:07 listener-th…
Onspaces freezes!
Hi, how is your "servername" resolved? i.e. ping servername or nslookup servername or dig servername If it is 127.0.0.1 then IDS is listening only on localhost and you can not connect to it from "outer world". You must list servername as seen from "outer world" inside sqlhosts. H…
listener-thread: err = -25573
IDS 10.00.FC4 Solaris 10 New server, New Database Database has been up for 6 days. Received this error last night: 08:36:56 listener-thread: err = -25573: oserr = 13: errstr = : Network driver cannot accept a connection on the port. System error = 13. 08:36:57 listener: poll ret…
Re: Odd network error message
I once experienced a kind of network attack with similar consequences. Check the network logs. "Neil Truby" <neil.truby@ardenta.com> wrote in message news:4nuov3Fc7kt4U1@individual.net... > On every Informix server on the subnet - dev, test, production, doesn't > matter - we've …
Odd network error message
On every Informix server on the subnet - dev, test, production, doesn't matter - we've been getting this message for a day or two. Any ideas what it means?: 08:33:30 listener-thread: err = -25580: oserr = 104: errstr = : System error occurred in network function. System error…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Informix 9.21 on Solaris 10
Hi! I'm running Informix 9.21UC4 on Solaris. We've been running on Solaris 8 x84 for 5 years, and are now testing on Solaris 10. We are getting the following errors in online.log, and the database stops accepting connections. -------------------------------------------------- …
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
pb while connecting to win xp ids...
Hi, I have a pb connecting to an IDS 10.0.TC4 on Windows. Dbaccess works fine. Ilogin works fine. JDBC refuses the connection. Netstat reports well that oninit is listening to 1526 (aka turbo)... I have 2 other machines where it works fine. No firewall. Restarted, rebooted, re…
pb while connecting to win xp ids...
Hi, I have a pb connecting to an IDS 10.0.TC4 on Windows. Dbaccess works fine. Ilogin works fine. JDBC refuses the connection. Netstat reports well that oninit is listening to 1526 (aka turbo)... Restarted, rebooted, no way... Any idea? Side question: is windows-based IDS usi…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
the error in the online.log
this morning ,I exam online.log find flowing error: 03:55:51 Checkpoint loguniq 280608, logpos 0x32018, timestamp: 1692764495 03:55:51 Maximum server connections 527 04:02:25 listener-thread: err = -25587: oserr = 0: errstr = : Network receive failed.. 04:12:06 listener-thr…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: MaxConnect
> Hi, > > the bottleneck here is not poll threads. The bottleneck is most > probably the listener thread. Usually you have only one listener > thread for each protocol in use. (Situations where you have more > than one mostly are when you are listening to connect requests > on se…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Cannot create/access database on NFS mount.
Help! I've read every post on this board, and looked over a number of documents. sqlhosts is reconfigured and running, listening on 1536. What am I doing wrong? (Connecting from XP SP2, using both IBM's ODBC and OpenLinks, same result, to AIX 4.x.)…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
connecting to Informix results error -908
Hi ! I have Informix Dynamic Derver 9.4 and Client-SDK 2.90 running on Windows XP. The problem is that trying to connect the client to the data base results : error -908. Informix Error Messages tells about this error: "Attempt to connect to database server (servername) failed." …
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Using JDBC with Informix on an Avaya CMS
We are trying to connect via JDBC with an Informix DBMS running on an AVAYA G3 Definity Telephone switch. We can connect using ODBC and appear to have all the right passwords, logins, etc. When we try to connect it just hangs. What are the possibilities where we are wrong. Do we …
Re: Which port is Informix listening?
Hi, the listener is using port 49213 (assuming that that number is the actual port number - usually I use "netstat -n" or "netstat -an" to figure this out as I'm sure that I really see the port number in that netstat output). [ This line of your netstat output has the "LISTEN" …
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
RE: Error message in online.log
I suspect that these messages are related to the network. I see them periodically on different systems, and generally when ODBC or JDBC connections are in use. I suspect that they onl occur when the network is busy. Regards Malcolm -----Original Message----- From: owner-info…
RE: Error message in online.log
Just to add some more info: I have isolated the offending application (by using DBSERVERALIASES), it is Java written, is there anything special about connecting Java apps to IDS7.31 ? This app has worked perfectly for years and has only recently started generating these errors …
Error message in online.log
You should check your operating system logs, these errors occurs for example when your application server is dying, your network card/cable is faulty (or a switch/router). Regards, try_and_err Colin Dawson schrieb: > We received the following error messages overnight, can anyon…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Users cannot access database
Hi, Any body know what was the problem? System and network was fine. The problem only last for 10 minutes. Thanks to anybody help me. Owen Primus Canada Toronto,ON. 416-2077143 4:35:58 listener-thread: err = -25573: oserr = 24: errstr = : Network driver cannot accept a connect…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Error listener-thread: err = -27001 in online.log
Does anyone know the cause of this error in online.log. This slows down conciderably the response time 11:01:41 listener-thread: err = -27001: oserr = 0: errstr = : Read error occurred during connection attempt. 11:02:44 listener-thread: err = -27001: oserr = 0: errstr = : Read…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
"MyDoom" virus and how to protect your computer from it.
By Nowshade Kabir, Rusbiz.com Remember the Sobig viruses of last year that wreaked havoc and caused significant financial damage to corporation world? Well, the first major virus of this year has potential to beat those attacks easily. What is MyDoom? The new virus, which is a…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
tcp/ip connection lost after doing an sql statement
hi all, We have a daemon program created in c which listens on a specific port for any connection request from radio frequency identifiers (rfid) after which it forks a child and the child process accepts the connection so the mother process can continue listening for other r…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
IDS 9.4 install
GlacierAfter a fresh install of the trial 9.4 on Windows 2003 server, the log shows this everytime I start the service: Thu Sep 04 20:47:34 2003 20:47:34 Booting Language <c> from module <> 20:47:34 Loading Module <CNULL> 20:47:34 Booting Language <builtin> from module <> 20…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
oracle?
<laughing> So I just went to the oracle.com site looking for some info that is supposedly there re: the reference implementation of sqlj. When I hit the "Search" link I got: Database Log In Failed TNS is unable to connect to destination. Invalid TNS address supplied or…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Port Number
You must set the port number where informix listen to at server and client. Kind regards Bendler "Geppo" <geppo@tim.it> schrieb im Newsbeitrag news:900gu9$m3q$1@newsserver.cilea.it... > Hello Anyone know the default port number to connect into Informix DBD via DBI > interface …
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
listener-thread: err = -27001: oserr = 0: errstr = : Read error occurred during connection attempt.
Hello, This error (" listener-thread: err = -27001: oserr = 0: errstr = : Read error occurred during connection attempt.") occurs each day with a certain regularity. Our site is a web site where users connect through tlitcp via tcp socket to a IDS 2000 server on Sun Solaris 7. …
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Re: Adding additional Listener ports
gary child wrote: > > It has been suggested to me that adding additional Listener ports to /etc/services > and corresponding aliases to sqlhosts may provide a performance gain by spreading > user connectivity between the multiple listener ports. We run 7.31.UC5 on > HPUX11 and al…
Adding additional Listener ports
It has been suggested to me that adding additional Listener ports to /etc/services and corresponding aliases to sqlhosts may provide a performance gain by spreading user connectivity between the multiple listener ports. We run 7.31.UC5 on HPUX11 and all connections via tcp. We do…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: how to access informix and JDBC type 4 Driver for Informix
From: "senthil" <senthilb007@yahoo.com> > >Could you please tell me in which port number does the informix listen for >TCP connection? >Is there any default port number available ? >And if not how can I know in which port number its now listening ? >Will it be available in the …
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
Re: Re: IDS 2000...don't work. please help
Madison Pruet wrote: > This looks like it might be a permissions problem. The listener thead is > responsible for accepting the initial connection to the engine. I'm > guessing that you are using TCP and the listener thead is not able to > connect to the socket that it is supp…
IDS 2000 on Linux (doesn't work.Please help..
Edward Rosenthal wrote: > just a guess but have you rechecked the $INFORMIXSQLHOSTS against the > /etc/services file? > and have you checked netstat -a | grep <YOUR-/ETC/SERVICE SNAME> for > LISTENER AND ESTABLISHED connection? yes.. i have checked (and rechecked) all above .…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Who takes 99% of CPU
Pascal Fiset wrote: > Hi guys, > > When i do a ps aux , i see that the online process is running at 99% on the > CPU. > > I would like to know if there's a way to know who is taking all the CPU > in that instance. onstat "something". > > Because when i "onstat -u" nothing moves …
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
Re: Informix on SuSE Linux 6.2
In article <385FA8D4.5F3306F3@bloomberg.net>, kagel@bloomberg.net wrote: > [Earlier discussion SNIPPED] > > No. The ONCONFIG file parameter NETTYPE configures the listeners and > replaces the OL5.xx parameter USERS to configure the number of concurrent > users that can attach …
[HELP]Informix Dynamic Server got errors!!
Dear all. Our server (Informix IDS 7.31 TC2)got an error that no any connection can connect to the server. When I issue the onstat - command, it prompt the server is in the On-line Mode, but when I issue onstat -m command, I found many same errors like this: <xxx>connection rejec…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Error 25591: Transport control received an invalid connection address when accessing database via seipcpip method
"Art S. Kagel" wrote: Hi, > OOOPPSS, I did not notice this is SE! You must start a listener process: > $INFORMIXDIR/lib/sqlexecd sqlexecd_se > with the environment setup like a local shared memory client. sorry, i think you misunderstood my original message. Of course…
NETTYPE values
"Jukka Mäki" wrote: > > Hello ! > I need some information how to define NETTYPE values in onconfig, when i > need 3000 onsoctcp connections ( onstat -g ses). Which one is correct: > > soctcp,1,3000,NET better: soctcp,1,3100,NET either this or > soctcp,6,300,NET better: soctcp,…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
USERTHREADS and TRANSACTIONS parameters
Webber Valerie H wrote: > > Are USERTHREADS and TRANSACTIONS parameters still valid for Informix 7.2.4? > Or were they removed? > > Thanks in advance... They have been removed. Their control has passed to the NETTYPE parameters and is a function of the number of listeners and n…
listener-thread : err = -25580, oserr = 35
I suspect we got this error after we installed RAS on Windows NT. listener-thread : err = -25580, oserr = 35 We are using IDS TC6 and it was running fine until the RAS installation. Now, it has a very long connection time. Can anyone help ?…
listener-thread: err = -25580: oserr = 35
I suspect we got the error after installing RAS on Windows NT 4.0 : 16:01:50 listener-thread: err = -25580: oserr = 35: errstr = : System error occurred in network function. System error = 35. Before this the connection is relatively fast. After installing RAS, it takes a lon…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Re: What is NETTYPE
kbg wrote: > > I don't understand how the NETTYPE parameter affects the performance of > the db and how I must configure it, > is it necessary to define it in the onconfig file? > what is the diffrence between the NET and CPU NETTYPE, > It's not well described in the Informix lit…
Re: Password Length > 8
This is a known bug. Change the password to something with a different length. > Some of my users are unable to connect to a recently installed 7.30 > instance on HPUX10.20. After much trouble shooting it turns out that if > the password > 8 characters they cannot connect. It l…
Password Length > 8
Some of my users are unable to connect to a recently installed 7.30 instance on HPUX10.20. After much trouble shooting it turns out that if the password > 8 characters they cannot connect. It logs 11:48:21 listener-thread: err = -952: oserr = 0: errstr = : User's password is not…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Re: IDS-Linux - cannot connect to DS from net
Art S. Kagel <kagel@bloomberg.net> wrote: >> >/etc/hosts >> > 127.0.0.1 sb270t >> >> 2. Shouldn't this be localhost? > YES the listeners are listening to the first address in /etc/hosts that > has the symbolic name sb270t which is 127.0.0.1, or the local loopback > d…
IDS-Linux - cannot connect to DS from net
Hi, All. Sorry for bad english. I have Slackware 3.x (kernel 2.0.35) + IDS 7_30_uc7_1, Forking 4 'ipcshm' listener threads...succeeded Forking 4 'soctcp' listener threads...succeeded /etc/services sqlexec 1540/tcp $INFORMIXDIR/etc/sqlhosts sb27049 onipcshm sb2…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Port Number
Hi there, Anyone out there knows how to check the port number that the Informix Dynamic Server is listening at. As I am currently trying to connect to the database using JDBC drivers from Informix. By the way, what is default port number that the Dynamic Server is listening at. …
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
err -952 question.
We are connecting to a UIS 9.14 database on a ultra-5 solaris 2.6 box from windows NT 4.0 using a user: ala password: ala and we are generating err -952 in the online.log. User "ala" has connect permission on the database, and I even granted resource to public. Any ideas why I am…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Help needed: onsoctcp on Linux
Marc Mielke wrote: > > Hi, > > I do have problems getting Informix IDS to startup when > network connectivity related entries are present in 'sqlhosts'. > > Apreciating any help.. I believe that you need a NETTYPE entry specifying that CPU VP be used to listen to TCP connections…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Problem conecting to informix
I'm triying to connect to a informix server from a win95 machine, and I set the hostname, username, password, also verify the port in the "services" file, but when I try to use the I-Login app to test the connection, this program crashes with out any error message. I was thinking…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Re: Follow-up: CPU poll threads ...
On Wed, 28 Oct 1998, Art S. Kagel wrote: > Schaeflein, Paul wrote: > > > > Would you please describe the difference between NET VPs and CPU VPs? And > > why is one better than the other? > [Original reply SNIPPED] > > OK. Basically a NET VP (shown as class tli, soc, ipx, shm, s…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Re: What means: CPU poll threads exceeds 'NUMCPUVPS' NETTYPE 'name' ......?
> >From: dengelsen@my-dejanews.com > > > >Informix (7.23) produced the following error in the message Log File: > > > >CPU poll threads exceeds 'NUMCPUVPS' NETTYPE 'name' poll threads > started on > >NET VP's. > > > >What does this message mean? > >What must I do to solve it? It…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Please Help: SE and I-NET problem
Running sqlexecd works great until I try to connect using ilogin. At this point the sqlexecd log file contains: 25506 process can't connect on socket. The client hangs. The sqlexecd continues to listen on the designated port. All configurations are correct, and product version…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
Re: problem with shared memory connections
Pete Smith wrote: > > hi all > > I'm having constant problems with shm connections in UDS 7.2x > The error returned is > -25588 - the appl process cannot connect to Online server server-name. > It looks like Informix will allow so many shm connections before > refusing a connecti…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Question: UPDATE STATISTICS and CPU usage
Georg Winkens wrote: > > While running UPDATE STATISTICS HIGH FOR table (colname) on a big > table we have the effect that nobody can connect to the informix engine > anymore (no matter to which database). We are running Informix 7.23 on a > single processor HP machine. It seem…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: HELP: Informix Performance on Tandem Non-Stop
Bergero Claudio wrote: > > My problem sounds like this: > > Trying to add connections to Online up to 65-75 the server isssued this message in online.log: > > 16:43:35 listener-thread: err = -25574: Network driver cannot open the network device. > 16:43:39 NSF putlocal: t_open …
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re-Post: NewEra and Crystal Reports
Does really nobody has any experience connecting NewEra 3.0 to the class library of Crystal Reports? As Informix dropped ViewPoint Pro as their report generator and choose Crystal Report, someone should have experience !? Someone from Informix listening ?? Thank you, Jens…
Socket Connections
Hello I am trying to develop a Java applet that allows employees to do their timecards online with an existing Informix database. My first thought was to try and use JDBC, but I am now told that Informix already listens for a socket connection on port 1525. How can I access the…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Problem of ESQL/C in Online 6.0 under HP-UX9.X
Hello, I get problem in running the demostration files. I am using ESQL/C 6.00 UC2 and Online 6.0 under HP-UX 9.X. My error is -25505 when connecting database. However, I get no problem in access the database under dbaccess. I find the following in the log file when running the…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…