Oninit® Archive
Results for “VPCLASS”
Network tuning advice needed
On Oct 9, 10:59 am, Tom <tlow...@munis.com> wrote: > Greetings All, > > I am looking for some advice on a new (to me) configuration. Up until > now, we have always had our engine running on the same server as our > application. That has now changed. We now have a setup with the >…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
What prevents a RSS to roll forward as fast as its primary?
Art, Here are differences that make sense between the primary and RSS, 236,238c236 < NETTYPE onsoctcp,50,220,NET --- > NETTYPE onsoctcp,40,220,NET 243,245c241 < NUMFDSERVERS 8 --- > NUMFDSERVERS 4 2…
DIRECT I/O (KAIO) Disabled in RHEL 9
Yes. Endeed KAIO class vcpu is related to the number of VPCLASS of type cpu you have. In my case just for testing VPCLASS cpu,num=1 Let me say that Informix will use AIO for every chunk which its size is not multiple of disk sector size (even if mapped to a mdadm RAID). So, for 4…
How many aio/KAIO
Hello All When using KAIO, what is recommended for vpclass CPU and AIO please ? Thanks ------------------------------ John Smith ------------------------------ #Informix…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
IDS 12.10.FC8 AIX 7.1 VPCLASS autotune=1
I am seeing the following in the ONCONFIG. VPCLASS cpu,num=12,noage,autotune=1 VPCLASS aio,num=2,noage,autotune=1 I don't see autotune documented. Is this not the same as: AUTO_AIOVPS 1 Don't see any AUTO_CPUVPS Thanks Kernoal…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Re: RE: onstat -g glo: cpu efficiency
We have an IBM Power 750 (Power 7+) with 16 cores defined running SMT so that the cores appears to the OS as 64 cores. We have 54 VPCLASS cpu Our average efficiency looks to be in the low 60% range. We are experience about 80 lngspins per day with an peek connections of about …
IDS 12.10 on HP-UX- DS Total Memory
Hi, Here our current memory configuration config for IDS 11.10 SHMVIRTSIZE 3000000 # initial virtual shared memory segment size SHMADD 1800000 # Size of new shared memory segments (Kbytes) EXTSHMADD 8192 # Size of new extension shared memory segments (Kbytes) SHMTOTAL 0 # Total…
Mutex logs on logical log flip
Thanks. We already knew from Marco Greco, ex of IBM, that the handling of this in 11.70 is vastly imrpoved. This is the last large customer resisting that move. VPCLASS CPU,NUM=230 # VPCLASS CPU - CPU #T5 Migration NETTYPE tlitcp,11,800,NET ... are the settings. The server has …
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
upgrade from 11.70.FC4 to 12.10.FC4 onconf questio
HPUX 11.31 (11vi3) HP BL870c from 11.70.FC4 to 12.10.FC4 I'm testing our ERP upgrade to IDS 12.1 on our test server and after running the upgrade and checking the differences in the old and new onconf file I got a question or two. The new onconf doesn't have a VPCLASS aio setti…
Panic analysis
Folks, IDS 12.10 FC4, Linux 6. The following log is the only info we have about the crash ( no other info dumped ) You can see it was struggling to add lot memories segments before Panic .... The Panic was a also VERY curious one with some unexpected process terminated ... Wha…
11.5FC7WE x PROCS AFFINITY
Here is it, Art MULTIPROCESSOR 1VPCLASS cpu,num=3,noageVP_MEMORY_CACHE_KB 0SINGLE_CPU_VP 0 > To: ids@iiug.org > From: art.kagel@gmail.com > Subject: Re: 11.5FC7WE x PROCS AFFINITY [34716] > Date: Wed, 25 Feb 2015 11:40:50 -0500 > > Post the VPCLASS cpu entry from your ONCONFIG f…
VPCLASS parameter
Can someone please tell me what the VPCLASS parameter should be for my instance. Following is the environment details. IDS 11.70.FC8W1 VPCLASS cpu,num=4,noage CPU info: 6 PA-RISC 8800 processors (1.1 GHz, 64 MB) CPU version 10 12 logical processors (2 per socket) Thanks…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Fatal error in ADM VP at mt.c:14100
Hi, We have faced issue on almost of all instances after giving following error . 00:47:24 Fatal error in ADM VP at mt.c:14100 00:47:24 Unexpected virtual processor termination, pid = 5482, exit = 0x9 Kindly guide us what cause this issue ? We are using IDS 11.50FC8W3…
Licensing : VPU needed ?
The calculation of the VPU depends on the processor, the IBM computer can be found here: https://www-112.ibm.com/software/howtobuy/passportadvantage/valueunitcalculator/ vucalc.wss To understand the sub-capacity licensing, you can look at these two sites: http://www-01.ibm.com/so…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Informix on Linux on VMWare
Keith Simmons wrote: > Hi > > It looks like I am going to have to migrate an IDS instance from Solaris > to Linux. > Current machine is a 16Gb dual chip SPARC T5120 with twin path, fibre > attached disk (Raid 1) running IDS 11.5 on Solaris 5.10. > Target machine is likely to be s…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Efficiency of the Informix Virtual Processors
Dear All, IDS 11.50.FC8W2 on Hp-UX 11.23 (12 core - 55 GB mem to informix) No other instance running on this machine. I was reading a post by john on http://www.jfmiii.com/informix/?p=194 It say that if the efficiency drops below 80% (onstat -g glo output) then there seems to …
CPU informix
See the vpclass entry for class cpu in the onconfig file. Art Sent from my Galaxy S®IIILICU GARCIA <licu99@gmail.com> wrote:how to configure CPU with informix. For example, if i have 1 CPU with 4 cores and i want to assign only 2 cores. What is the correct parameter on onconfig…
Innovator-C Edition now down to 1 CORE
Tested the limits and found the following: IBM Informix Dynamic Server Version 11.70.FC5IE -- On-Line -- Up 00:00:12 -- 165604 Kbytes 10:28:46 Warning: The IBM IDS Innovator-C Edition license restriction limits the number of CPUs on this machine to 4. The number of the CPU VPs …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
koi -1 display from onstat -g iov (11.50.FC8)
Where is the -1 for the koi vpclass coming from in the output of the onstat -g iov command, ex: AIO I/O vps: class/vp/id s io/s totalops dskread dskwrite dskcopy wakeups io/wup errors tempops fifo 12 0 i 0.0 0 0 0 0 0 0.0 0 0 kio -1 0 i 3.8 209628 207709 1919 0 444439 0.5 0 0 An…
VPCLASS cpu on sun/oracle M4000 machine
Hello, I have an IDS 11.50.FC6 instance on an M4000 oracle server with 4 CPUs with 4 cores * 2 threads each. The OS (Solaris 10) 'sees' a total of 32 CPUs. The thing is, I'm trying to tune the cpu VPCLASS onconfig parameter so that this instance is able to use more CPU power, but…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
RE: NETTYPE "CPU" vs "NET"
Just a quick answer for only one aspect: On Tue, Mar 1, 2011 at 1:24 PM, Tristan Ball <tristanb@pronto.com.au> wrote: > Results from "Step 4", with various combinations of settings: > > VPCLASS cpu,num=4,noage > soctcp,2,10,CPU 500/sec > soctcp,2,10,NET 640/sec > > VPCLASS cpu,…
Fatal error in ADM VP at mt.c
I've the following messages in online.log of an 9.40.FC9 informix dataserver : 17:52:55 Fatal error in ADM VP at mt.c:12703 17:52:55 Unexpected virtual processor termination, pid = 1466506, exit = 0x90009 17:52:55 invoke_alarm(): /bin/sh -c '/bases/informix/pcampcam/admin/ontap…
VPCLASS parameter
Hi, We upgraded our IDS engine in HP-UX B.11.11 from version 10.00.FC6 to version 11.70.FC1. There is a parameter that we stumbled on. If you have any insight, please help. VPCLASS = ??????????? The server has 4 CPUs, and the old parameters from 10.00.FC6 are: MULTIPROCESSOR 1…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Hello All
One more thing, in the old days we were told when using KAIO to set the NUMAIOVPS to 2. So should I also have this: VPCLASS aio,num=2,noage > I have a question about the VPCLASS variable. If I want a KAIO, > using 2 CPUs and my connections are socket connects through TCPIP > po…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
optimum usage of resources
One more thing : In the IDS 9.4 documentation I find that NUMAIOVPS (and other parameters) have been replaced with VPCLASS parameter.…
Connections blocked - Connect Timeout Expired
Correction (zero NET VPS after changing VPCLASS to cpu); With; NETTYPE soctcp,7,350,NET VPCLASS net,num=7,noage Results in; 7 Network VP, and 1 CPU VP. With; NETTYPE soctcp,7,350,NET VPCLASS cpu,num=7,noage Results in; 0 Network VP and 7 CPU VP!…
Initialization of Java virtual processor failed
when trying to install a java udr i'm getting the following nessage: 9444: Initialization of Java virtual processor failed: (cannot create gc file) Can anyone help? Here is the statment: execute procedure install_jar( "file:$INFORMIXDIR/extend/krakatoa/examples/Env.jar", "env_…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Seeing one oninit working hard while others are no
I think we are running into a condition where only one virtual processor is trying to do a majority of the work on a remote server via synonyms. When you look at all the oninit modules running on the remote server, it looks like only one is really taxed: ps -ef |grep oninit hd…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
VPCLASS Notation, pros?
Hi. I want to know if replacing former NUMCPUVPS, AFF_SPROCS, and so on for VPCLASS in IDS 10 brings any advantage in terms of better performance or avoiding malfunction. Admin guide just says "you should" (p. 6-13) and warns against using both notations at once. Thanks i…
Odd Performance
IDS 10.00.UC8 Solaris 10 I am playing with our new Solaris server - I just increased the VPCLASS parameter to VPCLASS cpu,num=32,aff=64-95,noage from cpu,num=5,aff=13-21,noage. Our new server has 132 virtual processors available: uname -X NumCPU = 128 psrinfo -pv The physical…
configure vpclass on multicore systems (solaris)
Hi, I have a doubt on what the optimal onconfig VPCLASS parameter should be on multicore systems. For example, on a Sun M4000 server, with 4 physical CPUs and 4 cores per CPU, when you issue an uname -X to get the number of CPUs, I get: lafeoriclu1-[PROD]-(dbpoc):~ $ uname -X | g…
Long Spins
Hi, The IBM IDS document says: "To reduce longspins, reduce the number of virtual processors, reduce the load on the computer, or, on some platforms, use the no-age or processor affinity features." But wait for other to advice you, I'm sure the IDS guru's will suggest you a so…
Correlation between NETTYPE and VPCLASS
Hello, Is there any correlation between the values of the following two parameters VPCLASS NETTYPE I mean if the value of numcpus is 6 in VPCLASS i.e VPCLASS cpu,num=6,aff=17-22,noage, then is it necessary that the value of NETTYPE should be somewhat like the following NETTY…
How to enable/disable noage
Hi, This is how we defined the VPCLASS in ONCONFIG file. VPCLASS cpu,num=16,aff=0-15,noage How we can activate/deactivate the aging for a VPCLASS. We try to initialize the server by eliminating "noage" and without eliminating "noage" in the VPCLASS but in both cases we didn't g…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
Re: MSC virtual-processor class too loaded aft....
Hi, first of all, thank you very much John and Jacques for your answers. The IDS engine allocated another vp msc (I supose due to the high load of the first one). I have tried without success (at the moment) to catch operations that msc vp is doing with the following command: …
MSC virtual-processor class too loaded after migra
Hi, After migration our DWH from IDS 10FC9 to IDS 11.5FC3 (Under SLES 10 SP2) I found that msc vp class (Miscelaneous System Call) are too loaded, as you can see in the following onstats: Can anybody tell me the reason, or can point me to the correct documentation to understand…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
Re: IDS 11.5 licence question: virtual versus physical processors ?
Martin Thole wrote: > We are planning to migrate our database server to a VMware server. > The new machine will be a HP BladeServer with 2 Quadcore-processors (=8 > cores), > but the (virtual) Linux-OS will only use 2 (virtual) cpu cores. > > How many processor licences are neces…
Re: IDS 11.5 licence question: virtual versus physical processors ?
"Martin Thole" <mth@o-b-s.de> wrote in message news:48e3667f$0$6617$9b4e6d93@newsspool3.arcor-online.net... > We are planning to migrate our database server to a VMware server. > The new machine will be a HP BladeServer with 2 Quadcore-processors (=8 > cores), > but the (virtual)…
IDS 11.5 licence question: virtual versus physical processors ?
We are planning to migrate our database server to a VMware server. The new machine will be a HP BladeServer with 2 Quadcore-processors (=8 cores), but the (virtual) Linux-OS will only use 2 (virtual) cpu cores. How many processor licences are necessary ? Which database editons (…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Hardware advice please
Hi all, I am looking for advice on what servers to buy to replace our existing informix db servers. We have to replace them, because they are dinosaurs and could pack up at any moment. Unfortunately I don't really have any idea what would be good to get as I've never been involve…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Multi Processor Performance (example myimport)
Hi Tim, I assume you are using IDS10 or more. Setting multiprocessor to 1 is right thing. Have you set VPCLASS? Please find more info below how you can set vpclass and enable more physical cpu for clients. http://publib.boulder.ibm.com/infocenter/idshelp/v10/index.jsp?topic=…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
Analysis of activities during checkpoint.
Hi Vartika, Please check this link. You can add but not drop virtual processors of the AIO, PIO, LIO, TLI, SHM, SOC, and STR classes. http://publib.boulder.ibm.com/infocenter/idshelp/v10/index.jsp?topic=/com.ibm.ad ref.doc/adref308.htm Thanks.. Amitava E - id : amitacha@in.ibm…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Re: CPU VP Issue
"Obnoxio The Clown" <obnoxio@serendipita.com> wrote in message news:mailman.1140.1211265848.20610.informix-list@iiug.org... > > tgirsch said: >> pokeyman76@yahoo.com wrote: >> > VPCLASS cpu,num=4,noage,aff=0-3 >> > This will turn on noage and affinity f…
Help With Affinit Parameter
Sorry Mr Kagel again a typo this time i am pasting the o/p of mpstat CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 0 16 1 88 15 6 414 6 21 35 0 846 1 1 0 98 1 7 1 75 42 34 334 4 28 24 0 224 2 1 0 98 2 6 1 76 2916 72 321 4 20 23 0 198 1 1 0 98 3 15 1 86 …
Re: how much cpu does Informix use
Art S. Kagel (Oninit) wrote: > Floyd Wellershaus wrote: [cutting] >> >> First question: Am I correct that only the cpuvps are directly tied to >> the physical cpus? Or do I need to be counting all of the vps ? > > That depends. If you are using a version before 9.40 (don't rem…
Informix database virtualization
Hi, I saw one running on XEN Linux. The VM was running in paravirtualization mode.The usual OS-dependent functionality was OK: no age, processor affinity, raw devices, direct I/O. It did not have UDRs and datablades. Performance was about the same as running IDS in the domain0 (…
Onbar and LTAPEDEV
I don't know about onbar. But, ontape picks up tape parameter changes made via onmonitor without needing a restart of the instance. However, I'd strongly recommend backing up your onconfig before hand and checking for diffs when your done. In some versions, onmonitor has been fou…
CPU-VP issue
We have the following: IBM Informix Dynamic Server Version 10.00.FC6 HP-UX om4db1 B.11.11 U 9000/800 4126011100 unlimited-user license 3 duel core 1-gig PA-RISC procs 12 gig memory We were attempting to tune our system and changed the following: from VPCLASS cpu,num=5,noage to V…
Re: RE: Informix 10.0 FC4 & Solaris 10
Hi, Thanks for the responses. We are not currently dealing with the images but with the relationship between Informix 10.0 FC4 and Solaris 10.0. The IDS 7.31 system which maintains the images will be replaced by this new system. We are stress testing this new box to get the bes…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
IDS 10.0
Hi, While setting up a test environment, a question concerning the correct setting for NUMCPUVPS popped up. We have a Hitachi SAN with fifty-seven 52 GB chunks allocated to this instance. Memory is 8 GB $ uname -X System = SunOS Node = test_1 Release = 5.10 KernelID = Generic_…
CPU Help
Wow, that's a lot of dbspaces. The good news, they're fairly small. As far as the # of AIO virtual processors, you'll have to watch disk performance. I can tell you that 2 AIO virtual procs may not be enough. I would try incrementing the number of AIO VP's by 20's each time you t…
Physical Processor to Virtual processor mapping.
Hello Everyone, We had recently retired one of the cluster nodes and are running the two Informix instances in the same node. We have also added additional CPUs to this node. Solaris version 9 IDS version 9.40 FC4 mpstat CPU minf mjf xcal intr ithr csw icsw migr smtx srw sys…
NOAGE Depreciated
The second part, it looks good to me Paul Watson Tel: +1 913-400-2620 Mob: +1 913-387-7529 Web: www.oninit.com Failure is not as frightening as regret. If you want to improve, be content to be thought foolish and stupid. > -----Original Message----- > From: ids-bounces@iiug.or…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: VPCLASS 'cpu' not enough physical procs for affinity
The following is the output of psrinfo in our Sun V890 ... # psrinfo 0 on-line since 06/16/2007 15:09:23 2 on-line since 06/16/2007 15:09:19 16 on-line since 06/16/2007 15:09:23 18 on-line since 06/16/2007 15:09:23 Please advise the value.. Dhaya …
VPCLASS 'cpu' not enough physical procs for affinity
Hi, I keep seeing this message "VPCLASS 'cpu' not enough physical procs for affinity" in the "online.log". We are running our application in a Sun V890 Server with 4CPU , 16GB RAM using "Informix Version 10.00.FC5" . Please advise if there any issues with configuration file. …
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
KAIO Question
On 29 Mar, 22:20, John <john_hib...@earthlink.net> wrote: > To any AIX / IDS gurus out there, > > Background: > > We are running IDS 10.00 FC4 on AIX 5.2 TL8. We have been having some AIO issues with two boxes (each is a 390 with 8 cpu's), one dev and one prod. We tuned the D…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: Mapping cpuvp's to IBM virtual processors ....
On Thu, 2007-02-22 at 17:27 -0500, ART KAGEL, BLOOMBERG/ 731 LEXIN wrote: > For soctcp use 1 or 2 NET VPs (a net VP should handle over 200 connections > efficiently but I like to keep that below ~150 myself). I added 2. > > #LRUs controls contention between users. In order to re…
Re: Mapping cpuvp's to IBM virtual processors on p
Your assumption is partially correct. You don't NEED all 6 CPU's allocated to CPU VPs, but it's a good thing. The IDS scheduler will allocate sessions to CPU VPs as needed so it's possible that one or a few logical CPUS will be harder hit than the others. That said there are tuna…
Mapping cpuvp's to IBM virtual processors on pSeri
We're currently running a read-only instance of IDS 10.0FC6 on AIX 5.3 TL-05. The logical partition (LPAR) hosting IDS has 2.4 physical CPU's, divided into 6 logical CPU's. Running nmon's cpu monitor shows CPU 0 at about 50% used, CPU1 used occasionally, and CPU 2-5 are idle. I'm…
VP error
IDS 9.4 error in log file. Database restarted and no errors reported. Any ideas on the seriousness of this error? 23:31:18 Fatal error in ADM VP at mt.c:12243 23:31:18 Unexpected virtual processor termination, pid = 499808, exit = 0x90009 23:31:19 invoke_alarm(): /bin/sh -c '/ho…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
NUMAIOVPS/VPCLASS
Apologies for asking this question but I've searched through the CDI archive and can't find it. Recently I read something about a config parameter (possibly undocumented) to do with an AIO setting when using cooked files instead of raw chunks. I though I read it on this forum bu…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Re: VP memory cache (was IFX_FOLDVIEW)
Guy . wrote: > > What is this "Virtual Processor Memory Cache"?? > > This feature is fallout from Informix revisting the world of benchmarks, as is the other xC5 feature, Fastpoll. > Well IDS 10.00.xC5 is out now. And the release notes do not mention (even though this was menti…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
EXTSHMADD New shared memory parameter?
Jacob wrote: > Hi family. > > In configuring a new server, I noticed a parameter I have not noticed > before: EXTSHMADD > > I'm trying to figure out from the "Administrator's Reference" exactly > what is the functional difference between SHMADD and EXTSHMADD. The > text reads: > …
HP-UX KAIOON
Alex wrote: > I try to run Informix with async. kernel io on a HP Itanium 4 Processor ... > onconfig entry: > VPCLASS kio,num=2,noage > > > BUT, after initializing with oninit there is obviously no usage of the > kernel async driver. > > > The command output of "onmode -p…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: cannot start with 4 AIO virtual processor
On Windows platforms IDS is KAIO only, hence in most cases there is no need for more than 1 AIO VP. In IDS versions prior to 9.30.TC6 this limit was enforced and an error was generated when a higher value was used. With KAIO systems the AIO VP is still used for some tasks such …
Re: cannot start with 4 AIO virtual processor
informix can only be run with 1 aio vp under windows. Any other value results in the server being started with 1. Unless 9.40 and 10.x are different (haven't checked)? Regards Stefan ********************************************************************** This email and any fil…
Re: cannot start with 4 AIO virtual processor
BTW, i forgot to tell... the ontape failed and, although, it can be a tape's problem we can cover all posible aspects... we have 4 cpu and 3 of them are assigned to informix and 4gb in ram with 131072 buffers...…
Re: cannot start with 4 AIO virtual processor
"Jaime Casanova" <systemguards@gmail.com> wrote in message news:1137432864.044113.214560@g43g2000cwa.googlegroups.com... > Hi, > > OS: NT4 > IDS 9.21 > > Last saturday i was trying to make a level 0 backup so i execute: > ontape -s -L 0 > > And it gives me this message: > > Warni…
cannot start with 4 AIO virtual processor
Hi, OS: NT4 IDS 9.21 Last saturday i was trying to make a level 0 backup so i execute: ontape -s -L 0 And it gives me this message: Warning: Dynamic Sever 2000 cannot start with 4 AIO virtual processor, limit exceeded. Started with 1 AIO virtual processor. I didn't configure…
RE: MULTIPROCESSOR settings on a multiple CPU server with
>MULTIPROCESSOR Specifies that you are running on a multiprocessor computer I was getting tripped up on: Running on a Multiprocessor Computer If you are running multiple CPU virtual processors on a multiprocessor computer, set the MULTIPROCESSOR parameter in the ONCONFIG file t…
Upgrading from 9.21 to 10 planning
We are finally upgrading from 9.21 (ugh) to 10. I am starting to plan the upgrade now. What pitfalls should I watch out for? What new settings and features should I investigate. We run Alphas on tru64, if it makes any difference (which it probably does). What about the new VPCLA…
Re: sqlj.install problem
Hello Guy, I have been set the SINGLE_CPU_VP 0 and VPCLASS jvp,num=1. the context switch error have been solve. Now I am finding a new error. The code is;- execute procedure install_jar( "file:$INFORMIXDIR/extend/krakatoa/examples/JDBC.jar", "jdbc_jar", 0); The error is: I…
Re: sqlj.install problem
Hello Guy, thanks, I could not find the vpclass parameter error. EXECUTE PROCEDURE sqlj.install_jar ('file:E:\\program\\informix\\jar\\ninesync.jar', 'ninesync_jar', 1); 9498: Incorrect path to JAR file specified: (java.io.FileNotFoundException: \\tmp\\coffee.informix.ninesync_…
Re: sqlj.install problem
Maroon, You could try two things. 1. Make sure SINGLE_CPU_VP is set to 0 in the onconfig file. 2. Try changing the VPCLASS parameter to: VPCLASS jvp,num=1 After checking 1. and changing 2. restart IDS and try again. If still no luck, try the examples in %INFORMIXDIR%\\extend\…
Re: sqlj.install problem
You didn't answer these questions: What is the exact OS and version? e.g. "XP Professional Service Pack 2" What is the IDS version (output from onstat -V)? Can you run onstat -d to confirm you have an sbspace? But from the values you pasted it looks like you're quoting "onconfig…
sqlj.install problem
Maroon wrote: > Hello all > I am quite new in the informix database. When i was trying to > install java jar file in the informix, i get the following error. > > EXECUTE PROCEDURE sqlj.install_jar > # ^ > # 9799: User Defined Routine (…
FW: Informix versus Oracle Spatial
This is awesome work. I think it touches on some very salient points, especially regarding virtual processors and threading. It is amazing that Oracle technology could have gone so wrong despite the amount of money they have as a company, and how they could not come up with a b…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Crash of the instance
Hi all, Informix Dynamic Server Version 9.30.UC2X7 Suse Linux msp275 2.4.21-190-smp Chrash: 15:32:25 Maximum server connections 20 16:00:21 Logical Log 21747 Complete. 16:00:23 Logical Log 21747 - Backup Started 16:00:23 Logical Log 21747 - Backup Completed 16:00:23 Fatal…
Posting from the Informix-list
Hi all, Informix Dynamic Server Version 9.30.UC2X7 Suse Linux msp275 2.4.21-190-smp Chrash: 15:32:25 Maximum server connections 20 16:00:21 Logical Log 21747 Complete. 16:00:23 Logical Log 21747 - Backup Started 16:00:23 Logical Log 21747 - Backup Completed 16:00:23 Fatal…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Re: IDS 10 Download?
David Williams wrote: > By the way...I thought NUMCPUVPS,AFF_SPROCS,AFF_NPROCS > and possibly even SINGLE_CPU_VP is depreciated? > > VPCLASS is the new way..sure I saw this in a ONCONFIG file > somewhere (9.40.UC5?) but IDS 10.0 has no mention of > VPCLASS and still has NUMCPUVP…
Re: IDS 10 Download?
David Williams wrote: > By the way...I thought NUMCPUVPS,AFF_SPROCS,AFF_NPROCS > and possibly even SINGLE_CPU_VP is depreciated? > > VPCLASS is the new way..sure I saw this in a ONCONFIG file > somewhere (9.40.UC5?) but IDS 10.0 has no mention of > VPCLASS and still has NUMCPUVP…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
More CPUVPs than processors
Mark wrote: I've always found that for any CPU faster than about 400MHZ (~600 for x86 CPUS) you can run at least 2 CPU VPs per CPU. Now that CPUS are MUCH faster and multi-pipelined and multi-virtual CPU's, you can likely make that 3 or 4 or 5 times # physical CPUs. I think th…
Could not fork a virtual processor: errno = 12
Hello The past week I had a problem with a memory bank of my SUN450 with solaris 8 The problem is already fixed, but I try to rebuilt a secondary instance with HDR y it is no possible, the steps are the same i had used alltimes: onstape -s -L 0 in the primary server in stanard …
DB-Crash
Hi Everyone, IDS: Version 9.30.UC2X7 SuSe Linux 2.4.21 We received the following error messages in our log file: 12:26:42 Logical Log 11992 Complete. 12:26:44 Logical Log 11992 - Backup Started 12:26:44 Logical Log 11992 - Backup Completed 12:26:45 Fatal error in ADM VP at…
CPU Binding
Hello Everyone, I just wanted to clarify how does IDS determine the number of processors a UNIX box have? Our new server(Sun Fire E6900) uses the UltraSPARC IV processor, which is using the Chip Multithreading(CMT) technology. Through CMT, 20 additional virtual processors are sp…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
How many physical processors we need to support 32K THREADS in IDS.
Hi Team, Informix IDS supports upto 32K threads according to most IDS realease notes. My question is What sort of a machine you are looking at to support this many threads?? This came to my mind when considering max. num of threads(or connections that matter) that each CPU or NE…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Extra lines added to ONCONFIG by onparams - B169031
Malcolm Weallans <malcolm.iiug@btopenworld.com> wrote: >We are experiencing a phenomenon whereby extra lines >are being added to the ONCONFIG file. After these >lines have been added we are unable to use onparams >again or to start IDS again until we delete the extra >lines. Th…
RE: Extra lines added to ONCONFIG by onparams
malcolm weallans > We are experiencing a phenomenon whereby extra lines are > being added to the ONCONFIG file. After these lines have > been added we are unable to use onparams again or to start > IDS again until we delete the extra lines. The extra lines > are copies of the…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Re: Unexpected Virtual Processor Termination - HELP!
On Tue, 18 May 2004 08:13:07 -0400, Joel wrote: Bounce both engines. Remote synonyms are usually more trouble than they are worth. Could be better to use ER to replicate the needed data on the other server in a separate local database and access it from there. Art S. Kagel >…
Unexpected Virtual Processor Termination - HELP!
We have two SCO-Unix servers, one runs our order entry and acct software, the other runs the warehouse/inventory control software. Each server has an Informix DB, IDS version 7.30 UC2. The inventory control DB uses synonyms to provide access to data in the order entry DB, and vi…
Setting up JVM on 9.30HC5, HP-UX 11i
Hi chaps Having a problem setting up our server for Java UDRs; I have followed all the procedures in the manuals and William White's developerworks article (www-106.ibm.com/developerworks/db2/zones/informix/library/samples/db_java1.html ) and compiled the examples (in extend/krak…
Setting up JVM on IDS 9.30HC5, HP-UX 11i
Hi chaps Having a problem setting up our server for Java UDRs; I have followed all the procedures in the manuals and William White's developerworks article (www-106.ibm.com/developerworks/db2/zones/informix/library/samples/db_java1.html) and compiled the examples (in extend/kraka…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
RE: Virtual Processors and CPU-Load
Markus, With 2 Xeon (multithreading) CPU's it really makes sense to allocate 4 CPU VP's (not 2 as You did) to use CPU power more efficiently. The other thing to investigate is the 'BUFREADS by partition' statistics. Please, pay very close attention to those tables and indexes t…
RE: Virtual Processors and CPU-Load
Dont post MIME Have you run the correct update stats? In Informix monitor users -- onstat -u the ready queue -- onstat -g rea the sqls -- onstat -g ses {session number} You need to determine which sessions or parts of the application are causing the load. With 200 users you…
Virtual Processors and CPU-Load
Hi all, we are a little bit confused concerning the CPU-Load of our Informix-Database-Server. (9.4 UC3, RH9 2.4.20) We use a 2-Xeon (3.0 GHZ)-Dell-Server and both CPU's are mostly at 99.9%! All tables and indexes (DBSpaces, Extents, ...) are optimized to the best of our knowledg…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
VPCLASS entries in onconfig when adding logs
Hi, I've got a strange problem. IDS 9.30 UC1 (or UC2) on Solaris 8 I install IDS (using ids_install) and creates an instance. Add a new dbs for logs. I move the physical logs to this dbs, restarts. Everything is fine. I then add a logical log: onparams -a -d logdbs .. but addit…
Re: RES: Pentium 4 hyperthreading
Linux has support, IDS does not care whether the CPU is physical or a hyperthreaded virtual CPU. It will use it if you tell it to. Art S. Kagel Julio Cesar wrote: > Speaking on Affinity Processors, does anyone know if the IDS 9.40 has > support for this feature on Linux? > AF…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Reduce # of CPU: license cost
IDS 7.3 Customer is looking into possibility to reduce the no of CPU that is running in database server. Reason: cost saving since current charges for Informix license is based on CPU. Question: How to do that without physically removing the CPU ? Can that be done by reducing t…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
Unexpected virtual processor termination
Please help me for resolution of an Informix Error : 17:06:14 mt.c, line 10188, thread 9, proc id 8335, Unexpected virtual processor termination, pid = 8336, exit = 0x9 . 17:06:14 Assert Failed: Unexpected virtual processor termination, pid = 8336, exit = 0x9 17:06:14 Who: Sess…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Engine's re-setting
Hi, dsolalinde, You must to change the relative to the point in server you updated. The BUFFERS parameter can be bigger than before. I dont know how much BUFFERS you have but you can increment more memory to this parameter. Did it based in the LRU size, and its near to BUFFERS /…
Re: VPCLASS 'cpu' not enough physical procs for affinity
"kh teoh" <khteoh2001@yahoo.com> wrote: > I'm running IDS 9.30.UC2 on Redhat 7.1 in HP Netserver LXr8500 PIII > Xeon-700. The server has 4 processors. In my onconfig file I've the > following settings :- > > MULTIPROCESSOR 1 # 0 for single-processor, 1 for > multi-…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
VPCLASS 'cpu' not enough physical procs for affinity
I'm running IDS 9.30.UC2 on Redhat 7.1 in HP Netserver LXr8500 PIII Xeon-700. The server has 4 processors. In my onconfig file I've the following settings :- MULTIPROCESSOR 1 # 0 for single-processor, 1 for multi-processor NUMCPUVPS 3 # Number …
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
Shared mem connections and semaphores
HeadingDescriptionFormatvpThe virtual processor ID.DecpidThe system process ID for the process running this virtual processor.DecclassThe class of virtual processor.StrsemopsThe number of times this virtual procesor went idle and performed a semaphore operation to wait for work.D…
Help adding new CPU
We have IDS 9.21 UC 6 Running on Solaris 2.6 on an Enterprise 4500 Sun box Had 4 cpu and 4 gig memory. Added 4 CPU and 4 gig memory. I have upped the numCPUvps onconfig from 4 to 7 (also tried VPCLASS cpu,num=7) I have upped the nettype field from tlitcp,4,50,CPU to tlitcp,7,50…
balancing virtual processors
How do I get the kio's to be more balanced? I'm on a Proliant 7000 4-cpu box using NT4.0. C:\\\\WINNT\\\\system32>onstat -g iov Informix Dynamic Server Version 7.31.TC2 -- On-Line -- Up 08:00:59 -- 1643008 Kbytes AIO I/O vps: class/vp s io/s totalops dskread dskwrite dskcopy …
NETTYPE
I would just like to clarify on the setting of NETTYPE on the ONCONFIG. Can I put several NETTYPEs on the one file, like: NETTYPE ipcshm,3,,CPU NETTYPE soctcp,,20,NET because I use the DBSERVERNAME and the DBSERVERALIASES with different connections? I wasn't so clear to me in t…
Informix Lockup (Wierd)
----- Original Message ----- From: "Phillips, Rob" <RPhillips@ce-a.com> To: <ids@iiug.org> Sent: Thursday, January 30, 2003 8:14 PM Subject: Informix Lockup (Wierd) [184] > Occasionally I am experiencing Informix locking up. It won't accept any db > connections, or process any S…
RE: # of instances per machine
I like having 2. One XPS setup, one IDS setup for the OLTP needs. I wish there was conncetivity between them. cheers j. > -----Original Message----- > From: Art S. Kagel [mailto:kagel@erols.com] > Sent: Wednesday, February 07, 2001 2:42 AM > To: informix-list@iiug.org > Subje…
RE: # of instances per machine
It depends. What version are you running? If version 5 then perhaps that might be a good rule. I would not consider running 7.x+ on less than 4 CPUs. It also depends on whether these instances will all be active at the same time, if they can swap out...... However. I am hig…
# of instances per machine
If the question is 'should' you configure, the answer is ONE! Certainly for a production server. If you have man CPUs then you can likely get away with 2-4 with enough memory. Art S. Kagel Christian Eriksson wrote: > > Hi! > > I wonder if there's any recommendations about how…
FW: what does lngspins mean?
Longspins are spin locks that virtual processors have spun more than 10,000 times in order to acquire. To reduce longspins, reduce the number of virtual processors, reduce the load on the computer, or, on some platforms, use the no-age or processor affinity features. Dirk Reach …
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
RE: Assert Failed: Unexpected virtual processor termination, pid
nope. but oncheck was being run. -----Original Message----- From: Obnoxio The Clown [mailto:obnoxio@hotmail.com] Sent: 30 November 2000 18:12 To: yfwoi@tpl.com.sg; informix-list@iiug.org Subject: Re: Assert Failed: Unexpected virtual processor termination, pid = 74 095, exit = 0…
Re: Assert Failed: Unexpected virtual processor termination, pid = 74 095, exit = 0x100
Did someone kill an oninit process? From: Woi Yew Fong <yfwoi@tpl.com.sg> > >Can somebody tell me what could have happened to IUS the based to the >following extaraction from online.log? > >============= extraction from online.log ================ > >16:13:14 Assert Failed: U…
Assert Failed: Unexpected virtual processor termination, pid = 74
Can somebody tell me what could have happened to IUS the based to the following extaraction from online.log? ============= extraction from online.log ================ 16:13:14 Assert Failed: Universal Server must abort 16:13:14 INFORMIX-Universal Server Version 9.14.UC1 16:…
affinity process problem
Hi, please how can I know that I am using affinity process in my server (in the informix side). my config variables AFF_SPROC and AFF_NPROCS are positionned to respectivly 1 and 2. but I get the following message in the log file : VPCLASS 'cpu' not enough physical procs for affin…
questions onstat -g
Is this a trick question? Type onstat -g at the prompt and you will be presented with the options and descriptions of each. Of course there are so many options, pipe it to a page break, i.e. | pg or | more. Is that the answer you are a looking for? Or how about this? (I don't k…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
server 2000, cpu affinity problem
Hello, I installed Informix Dynamic Server 2000 in Red Hat 6.2 4 cpu intel server, after oninit , I inspected /usr/informix/etc/online.log found there are error message for cpu affinity the message is 11:14:11 On-Line Mode 11:14:11 VPCLASS 'cpu'…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Informix 9.21 VPCLASS question
Hi everyone, We are in the process of migrating to Informix v9.21. In the Informix Administrator's Guide, it mentions that Informix sugguests to use VPCLASS parameter instead of AFF_SPROC, AFFNPROCS, NOAGE, NUMCPUVPS, and NUMAIOVPS parameters. Does anyone have any experience o…
VPCLASS 'cpu' not enough physical procs for affinity
I upgraded our server to 4 processors, from 2. I set multiprocessor option to 1, numcpuvps to 3, nprocs to 3 and sproc to 1. At bootup I see the operating system recognizes 4 processors. In the log, upon startup of Informix I see: "VPCLASS 'cpu' not enough physical procs for aff…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: Oninit & Instance
Found in "onstat -g glo" Individual Virtual Processors Section -- Class CPU. Neil, Stephen & Edward, thanks for your help. Nick Kataria <kataria.nick@emeryworld.com> wrote in message news:8jdblp$c3e$1@news.cnf.com... > Hi All, > > If I have a process ID of an oninit process (fr…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
KAIO in AIX
Andre Ngo <andre@fiscal.org.jm> wrote in message news:8augdc$aj7$1@nnrp1.deja.com... > Hi all!!! Hi . > I came to a deadlock tying to figure this one out. > Is there a way to add more KAIO to the engine? Number of kio threads is equal to the number of CPU virtual processors in…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
when informix-server down ?
Andreas Lommel wrote: > > Hi,- I think it`s better when I bring the informix db-server from time > to time down and start the server new. My question: Can I see when > it`s the right time (memory, ..) PLATFORM and VERSION info? There should be no need to bounce the engine perio…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
RE: Assert Failed: Unexpected virtual processor termination
> Hi gurus, > > IUS Version 9.14.UC6 > O/S = HP-UX 10.2 > > Way back in August before I stumbled across this list > IUS crashed and the online.log showed: > > "Assert Failed: Exception Caught. Type: MT_EX_OS, Context: mem" > closely followed by: > "Assert Failed: Unexpected virtu…
Assert Failed: Unexpected virtual processor termination
Hi gurus, IUS Version 9.14.UC6 O/S = HP-UX 10.2 Way back in August before I stumbled across this list IUS crashed and the online.log showed: "Assert Failed: Exception Caught. Type: MT_EX_OS, Context: mem" closely followed by: "Assert Failed: Unexpected virtual processor termin…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Memory Usage on Informix 7.24
LEE Hsin wrote: > > Hi, everybody=20 > > I have a question and hope you could give me suggestions. Now, we are = > developing an application on NEC UP machine (UNIX) with Informix 7.24. = > After starting up Informix, we use onstat utility to see how many memories = > used by Inf…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Informix 7.3 on NT Slow when replication across WAN
Hi, I have recently setup a Informix Replication server from Informix 7.3 running on Solaris 2.6 to a new Single PII 450 processor box running NT SP3 (256 MB Mem). When replication starts the processor sits at 100% for up to 20 mins Even though There were only 3 entries in the t…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Re: IDS & Workgroup Edition
John H. Frantz wrote in message <366D3928.E7586C67@rl.is>... >I'm finding it hard to determine what the essential differences in >functionality are between plain IDS and the Workgroup Edition. I've >gathered the following information from various sources, but I'm not >sure if it'…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Re: about virtual processors
> > Hmmmm....meaty stuff as usual, thanks for taking the time to > explain....so is the "timeslice" kernel tunable available generally and > if so could you point me in the right direction to read up on it and/or > use it?? > > Thanks > > Greg > You might try 'The Magic Garden' …
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: about virtual processors
Art S. Kagel wrote: .> .> Greg wrote: snip...... .> .> Hi Greg. It is not Solaris so much as having FAST CPUs. I have seen .> that on a system with only 2CPUs of speeds up to 150MHZ that there is .> no significant gain from more CPU VPs then nCPU-1. On our DGs which .> use 32 …
Re: about virtual processors
Greg wrote: > > Art - > > I can't tell you how giggly I am that you seem to be coming around to my > long held assertion that the "conventional wisom" of: NUMCPUVPS = > realCPUs-1 (or so) ain't necessarily so.....could it be your switch to > Sun/Solaris that's changing your mind…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Re: about virtual processors
Art - I can't tell you how giggly I am that you seem to be coming around to my long held assertion that the "conventional wisom" of: NUMCPUVPS = realCPUs-1 (or so) ain't necessarily so.....could it be your switch to Sun/Solaris that's changing your mind?? Most of my (admittedly…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: about virtual processors
For a 2CPU system most of us recommend using only a single CPU VP. Based on this, set: MULTIPROCESSOR 1 NUMCPUVPS 1 SINGLE_CPU_VP 1 NOAGE 1 AFF_SPROC 0 AFF_NPROCS 0 This is because IDS does not take advantage of only two CPUs well due to the overhead of managing the addit…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
about virtual processors
hi all: Could someone explain a little bit about virtual processors and their configurations? I am running workgroup dynamic server on sun solairs 2.6 with 2 sparce 300 mhz cpu and 256 meg of rams. how many vp should i assign to io and cpu, what's the relationship, an…
Re: Dynamically adding shared memory segs
Bill Weaver wrote: > > Today for some reason we've added 5 shared memory segments dynamically. It almost never happens > that we even have 1 added since I've worked to size our initial segment to avoid this. How can > I tell what is causing us to add so many all of a sudden? > …
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: VIR Datablade configuration question
"Art S. Kagel" <kagel@bloomberg.net> offerred: +David Buttrick wrote: +> > I'd like to be able to have both: + +> > VPCLASS vir,num=1 and +> > SINGLE_CPU_VP 1 + +> > in the same onconfig file, but the server carps: +Single CPU VP means just that, but your datablade want…
Re: VIR Datablade configuration question
David Buttrick wrote: > > I should add that: > > IUS 9.13 under IRIX 6.4 on Origin 200/256MB RAM/4*4GB Disks > > > > > I'd like to be able to have both: > > VPCLASS vir,num=1 and > > SINGLE_CPU_VP 1 > > in the same onconfig file, but the server carps: > > cannot use …
Re: VIR Datablade configuration question
I should add that: IUS 9.13 under IRIX 6.4 on Origin 200/256MB RAM/4*4GB Disks > > I'd like to be able to have both: > > VPCLASS vir,num=1 and > SINGLE_CPU_VP 1 > > in the same onconfig file, but the server carps: > > cannot use single cpu VP with custom VP. Adn the e…
Re: Virtual Processors
I had the same problem. It happens with big queries and you cant stop it really. The VP usually uses what it needs. The best option is to turn NOAGE off, so that the processes age and allow the OS some use of the CPU. Rgds, Jason On Mon, 08 Jun 1998 11:46:55 GMT, darren@syste…
RE: Virtual Processors
Darren, You might check your NOAGE and AFF_SPROC / AFF_NPROCS settings, and then see what your release notes say about those parameters. If this is just occurring when you run specific programs, what is the PDQ_PRIORITY that you are using when you run them? HTH. Paul Mosser O…
Re: Virtual Processors
You need to send us some more info. Is this a SMP box? How many CPU's? What applications are causing the problem? CPU bound Informix engine is not necessarily a bad thing, but if the entire system is slowing down then you need to tune a few things. What to tune depends on wha…
Re: Virtual Processors
darren@systeam.co.uk wrote: : I have a problem with a customer's site with a CPU virtual processor which : seems to be running out of control. It occours when I run one or two : programs, the CPU VP is taking about 90% of the system CPU time, and therefore : bring the system to a…
Virtual Processors
I have a problem with a customer's site with a CPU virtual processor which seems to be running out of control. It occours when I run one or two programs, the CPU VP is taking about 90% of the system CPU time, and therefore bring the system to a general go slow. The Informix engi…
Re: AIO virtual processor
Also sprach <dwillem@ibm.net> : :In the event viewer of Windows NT (4,0), everytime the server is started, we :see the next warning : :INFORMIX-OnLine Database Server cannot start with 2 AIO virtual processors, :limit exceeded. Started with 1 AIO virtual processor. : :What to do …
AIO virtual processor
Hi, We're running Informix 7.23TC1 on a Digital Alpha 4100 with 3 processors. In the event viewer of Windows NT (4,0), everytime the server is started, we see the next warning : INFORMIX-OnLine Database Server cannot start with 2 AIO virtual processors, limit exceeded. Started …
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
Re: slow performance
Thuc Nguyen wrote: > > Hi > > I am running ODS 7.23 u4 on HP 10.20 > > So many users complained about slow performance...I looked at "top".... > > IDLE has been around 21% > > %WCPU 36% == (command) oninit > %CPU 35% == (command) oninit > > The partial onconfig info.... [SNIP] > …
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: gfd virtual processor class...
June - sounds reasonable, thanks. I'll have to count tomorrow & see if they jive. Greg (from my alter ego at home...) June Tong wrote: > > : I was looking through the output of "onstat -g ioq", and it occurs to me > : I don't have a clue what VP type "gfd" is (see snippet belo…
Re: Cannot fork a virtual processor
Mark D. Stock wrote: > > Enigma wrote: > > > > Hi, > > My informix ODS went down when I tried to put it to online. I'm > > running a informix 7.14 on a IBM AIX 4.2 machine. The error in the > > online.log is > > Cannot fork a virtual processor errno=12. > > This hap…
Re: Cannot fork a virtual processor
Enigma wrote: > > Hi, > My informix ODS went down when I tried to put it to online. I'm > running a informix 7.14 on a IBM AIX 4.2 machine. The error in the > online.log is > Cannot fork a virtual processor errno=12. > This happens only intermittently. It seems to…
Re: gfd virtual processor class...
: I was looking through the output of "onstat -g ioq", and it occurs to me : I don't have a clue what VP type "gfd" is (see snippet below). Can : anybody clue me in?? It's not a VP type. It's an I/O queue. I think it's Global File Descriptor (or something like that). Basica…
Cannot fork a virtual processor
Hi, My informix ODS went down when I tried to put it to online. I'm running a informix 7.14 on a IBM AIX 4.2 machine. The error in the online.log is Cannot fork a virtual processor errno=12. This happens only intermittently. It seems to indicate there is insuffici…
Re: Cannot fork a virtual processor
Enigma wrote: > > Hi, > My informix ODS went down when I tried to put it to online. I'm > running a informix 7.14 on a IBM AIX 4.2 machine. The error in the > online.log is > Cannot fork a virtual processor errno=12. > This happens only intermittently. It seems to…
gfd virtual processor class...
I was looking through the output of "onstat -g ioq", and it occurs to me I don't have a clue what VP type "gfd" is (see snippet below). Can anybody clue me in?? plsaphp1:informix 1> onstat -g ioq INFORMIX-OnLine Version 7.21.UD3 -- On-Line -- Up 26 days 06:59:37 -- 175552 K…
Re: Informix crashing UNIX on HP
On Thu, 02 Oct 1997 16:19:24 +0200, "Mark D. Stock" <mdstock@informix.com> wrote: >Silvester_Valiente@tnt.com.au wrote: >> >> Has anyone had an experience where Informix 7.23 UC4 caused Unix to >> Panic and shutdown. >> >> We are experiencing the problem when the virtual portion…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
HPUX 10.20-7.22 Restore problems
We have an HPK250, single processor, 160 meg mem, Informix 7.22. When I try to restore from a level 0 archive tape, the machine hangs completely. We have to use "the big switch" to reboot. Tried several configs - up to 64000 initial virtual, cutting down the off recovery threads…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Informix 5 Performance Issues
Remember - YMMV, etc: On 16 Apr 97 at 17:04, Phantom173 wrote: > We have been told by a consultant that a move to Informix 7 would > benefit us because (a) Informix 7 would reduce the number of connects > (and therefore processes) associated with the elephants, and (b) it > wou…
Re: MULTIPROCESSOR OPTION 7.13
In article <01bbcb91$cc1befe0$654750c6@irwin.interaccess.com>, irwin@objectsoft.com says... > > > >Allen Jantzen <allenj@ndr.com> wrote in article ><327fa20d.27552573@news.netline.net>... >> The Informix DSA Administrators Guide, version 7.1, page 10-18 says >> >> "On some two-pr…
Re: MULTIPROCESSOR OPTION 7.13
Just my 2 cents worth: I have a HP T500, T520, and 2 K200's which all have two processors. I found that running with the MULTIPROCESSOR set to two was the way to go. My performance while running config'd as one cpu was good, but sometimes I'd see the one cpu at 100% while the o…
MULTIPROCESSOR OPTION 7.13
The Informix DSA Administrators Guide, version 7.1, page 10-18 says "On some two-processor computers, you should only run one CPU virtual processor because the overhead of synchronizing the two virtual processors offsets the benefit of distributing the processing" Of course, us…
Re: Query Retrieval
Srirama Sundararajan Rajagopalan <rajagopa@nps.med.ge.com> wrote: :Hi Folks: :I am working on improving the query performance in informix 7.1. :I already have unique indexing on this table and besides optimizing :the query, virtual processor technique, is there any other techni…
Query Retrieval
Hi Folks: I am working on improving the query performance in informix 7.1. I already have unique indexing on this table and besides optimizing the query, virtual processor technique, is there any other technique that can be employed to improve the query retrival time in informix…
lastest compare against oracle
can anyone provide some new information on the rdbms wars between informix and oracle. I know oracle blasts informix for the poor performance, transaction logging, record locking mechanisms and informix touts the performance gains on the methodology for using threads instead of p…
HP K200 and Online 7
We are experiencing SEVERE performance problems trying to upgrade from Online 5 to Online 7. Online 7 runs about 400 percent slower than Online 5 up until +- 400 processes. (Confirmed by Informix S.A). Online 7 performance never degraded even when the load went above 400 process…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: unexpected virtual processor termination
This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. ---1503566844-140477562-830393090=:47444 Content-Type: TEXT/PLAI…
Re: unexpected virtual processor termination
Sounds like someone issued a Kill -9, while it was holding locks? Anyway I suggest you turn on your montoring program/script (if you do not have one, I got one to watch engine and another one to watch user's) and see what processes are actually occuring at that time. If you want …
unexpected virtual processor termination
We use Online 7.11 on IBM RS6000 AIX 4.xx (32 MB RAM) for development tasks. Often, while 4GL program is being compiled, Online shuts down. In online.log file one writes: "unexpected virtual processor termination, attempting to bring system down". This virtual processor is msc. …
<No Subject Supplied>
>On occassion we can see that the 'oninit' process associated with the CPU >virtual processor of Informix is taking 100% of the CPU. Is there a good >way now to track this down to which Informix sessions are actually using >this CPU time? >Is there a better, more direct way to …
Re: processes sspawned by 7.1
>I noticed there are a lot of processes names oninit -s >spawned by the database engine on start-up. Can someone >enlighten me as to why this is. I'm sorry I'm not familiar >with the new engine and am just groping along. You get an oninit process for every Virtual Processor (V…
Re: processes sspawned by 7.1
Carol Stimmel (stimmel@fsl.noaa.gov) wrote: : Hi, : I noticed there are a lot of processes names oninit -s : spawned by the database engine on start-up. Can someone : enlighten me as to why this is. I'm sorry I'm not familiar : with the new engine and am just groping along. …
Re: Informix dual processor scalability
In article <DJ6CHK.5zx@dsbc.icl.co.uk> smb@oasis.icl.co.uk "Stuart Britt" writes: > Using Informix on 1 processor we achieve good performance. If we switch to > 2 processors, then our performance actually degrades. We have been given > some advice on tuning the system for dual…
Re: Informix dual processor scalability
According to my rusty memory, the reason for this is something about the overhead necessary to handle multiple processors only being overwhelmed by the performance increase after three processors. So you should tune as tho' you only have a single processor... :-( HTH. }Does any…
Re: Informix dual processor scalability
Stuart Britt writes: |> Does anyone have any info on the following problem? We are using Informix |> version 7.10.UC1 for Intel UnixWare 2.01 on single processor and SMP |> machines. |> |> Using Informix on 1 processor we achieve good performance. If we switch to |> 2 processor…
Re: Informix dual processor scalability
: smb@oasis.icl.co.uk (Stuart Britt) writes: : Does anyone have any info on the following problem? We are using Informix : version 7.10.UC1 for Intel UnixWare 2.01 on single processor and SMP : machines. : : Using Informix on 1 processor we achieve good performance. If we…
Informix dual processor scalability
Does anyone have any info on the following problem? We are using Informix version 7.10.UC1 for Intel UnixWare 2.01 on single processor and SMP machines. Using Informix on 1 processor we achieve good performance. If we switch to 2 processors, then our performance actually degra…
Informix 7.1 Online Performance Questions??
Hi, I'm trying to develop a performance profile / model for an application that has been developed using the Informix Online Dynamic Server v7.1. The Server is being called by programs written in "C", which use the ESQL interface. My question is the following: I am observing …
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…