Oninit® Archive
Results for “onstat -g nif”
IFX 14.10 FC14 License File
it seems FC13 license can work with FC14 package: onstat -V IBM Informix Dynamic Server Version 14.10.FC14 ------------------------------ ke chen ------------------------------…
Stelo software as a replacement for Enterprise Replication
Hi John, We have our own Java-based, CDC solution package. Stable running for some 100 million TX a day, for years. However, the CDC is not the same as ER - it has a different focus and use case. We have many years of experience with every kind of ER use case for years, too. If y…
CDC on Workgroup Edition?
It is certainly possible to use CDC on Workgroup Edition. It does work. The bigger question is whether it can be done under the Informix licensing. I fully expect that it can because Workgroup licensing does allow HDR/RSS (limited to 2 secondaries), ER, and Continuous Log Resto…
How to restrict access for a user to Informix by IP?
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE AIX 7.1 We have several application servers and LDAP based authentication. How to prevent a user's connections from any but the application servers' IPs? ------------------------------ Sincerely, Dennis -------------------------…
Defragment sbspace
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, how to defragment (repack) a sbspace after plenty LOBs been deleted? ------------------------------ Sincerely, Dennis ------------------------------…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Informix 14.10.xc11
The manuals are usually pretty up to date, specifically the "What's New" section where you can see the FC11 items. What's new in Informix ibm.com Specifically: Internal IBM Java packaged with Informix server removed • GSKit upgrade • InformixHQ 2.4.1 enhancements • Partial Index …
INT to SERIAL in-place alter
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE My question is, why MODIFY INT to SERIAL does not use in-place alter? ------------------------------ Sincerely, Dennis ------------------------------…
How to switch RSS traffic to a dedicated network interface?
Hi, Trying to solve the -25582 problem we want to switch RSS traffic to a dedicated network interface. So, I added corresponding lines in sqlhosts, defined DBSERVERALIASES. Please, what are the next steps? ------------------------------ Sincerely, Dennis -------------------------…
Migrate Data Continuously from IBM Informix Database to AWS S3
Eralper: AS Paul noted, if you need to sync an on-prem Informix server with a remote Informix server on AWS S3 then Enterprise Replication is the way to go. It is fast, reliable, and solid technology that has been in Informix for over 20 years. If you need to move the data to a d…
How to know what edition is installed ?
I think that when there is no suffix on the version, that that is Enterprise Edition: IBM Informix Dynamic Server Version 12.10.FC6XC <-- custom build, but no suffix IBM Informix Dynamic Server Version 14.10.FC3 ------------------------------ Mike Walker ------------------------…
Are there hidden gotchas w.r.t. moving sysadmin tables?
Steps to move sysadmin https://www.ibm.com/support/pages/moving-resetting-sysadmin-database-new-dbspace-ibm-informix-dynamic-server-ids ------------------------------ Gaurav Kumar ------------------------------…
Fast Recovery after correct shutdown
When the engine is down –what is the last line in the online.log ? If it is not IBM Informix Dynamic Server Stopped then the engine was not shutdown properly Cheers Paul…
How do I determine which edition I m running?
John Miller used to have a web page on this but I'm pretty sure it disappeared. If you execute a onstat - or an oninit -Version and see: IBM Informix Dynamic Server Version 12.10.FC10AEE -- On-Line ...... this is Advanced Enterprise Edition IBM Informix Dynamic Server Vers…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
log usage difference insert vs update
Original post: I created a table as: create table t1(c char(5120)); loaded a file of about 5 thousand lines (on average string of 25 bytes). It consumed around 5MB log space. But if i update these records update t1 set c=c||c where 1=1; then log space consumption is around 1.15 …
Informix binding problems
Hi Cristiano, if it is not too late, I will try to answer you. First a little introduction: Informix is binding listeners according to sqlhosts file (or registry). If you wrote IP address in third column (in row representing your INFORMIXSERVER), then Informix is listening to tha…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
CDC vs ER
Hi, our customer wants replicate data to oracle and informix server. For oracle wants use CDC and for informix too. Do you have somebody experience with replication over CDC ? 1.informix to oracle and other database system 2.informix to informix. I'm interested also to compare p…
REST API
Original post: <stuff removed> ... Questions 1) Why the wireless listener accepting connection from the local host(127.0.0.1) instead of ifmx-server(127.0.0.2) ? 2) Why I can not query by a single record(in test 3), anything wrong with the syntax or setting or the wireless confi…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
CDC Informix
Dave I have CDC running against a ER target to capture changes and pass on to $QL$erver. I cannot really comment on performance as there is nothing else accessing this database, it is only there so that CDC is running across a LAN rather than WAN (ER handles WANs sooo much bette…
CDR question on big transaction
In the source side, 'onstat -g nif' show the state is 'RUN,BLOCK'; In the target side, 'onstat -g nif' show the state is 'RUN';…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Re: onstat -g nif
Added to the FAQ. Regards, David. > On 27 September 2013 at 02:10 Madison Pruet <mpruet@us.ibm.com> wrote: > > > Usually that would mean that you have a very large transaction that the= > > target is trying to apply, and because it is a large transaction it's > blocked the netw…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
onstat -g nif
Folks, What might be the possibilities that will generate "RUN,BLOCK " in the State column of the output? We have significant ER data replication slowness issue... Thanks, Frank onstat -g nif IBM Informix Dynamic Server Version 11.70.FC7 -- On-Line -- Up 09:53:53 -- 8359540 …
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Replication with multiple network interfaces
Hello, I have an Enterprise Replication environment and I want to set up a secondary network interface to handle all of the replicated data between my two servers. Informix version is 11.70.FC5GE on SunOS 5.10. The sqlhosts file looks like this: metro_server group - - i=50 me…
ER network replication state
Hi, we use enterprise replication(all participants ids11.7FC5 on linux) and sometimes transactions are spooled to disk. In this cases the target is not suspended and the connection still exists. We can see on onstat -g nif the State 'RUN,BLOCK'. In this situation we get more and…
Re: ER issue
Yes - basic checks look good - although onstat -g nif shows run/blocked on server 1 [informix@psdb01spr logs]$ onstat -g nif IBM Informix Dynamic Server Version 11.70.FC7 -- On-Line -- Up 9 days 08:37:50 -- 20724404 Kbytes NIF anchor Block: 0x7d2f0ad8 nifGState …
Re: Informix on Linux on VMWare
>From (bad) experience; get as much memory as possible dedicated to the VM and use it for read-ahead buffering. The low I/O bandwidth will really hurt you if there's any decent amount of buffer churn / updates. Try to persuade your VM admin to get you a virtual disk on an under…
Re: Informix on Linux on VMWare
Keith: Points: - All Linux distros are about the same to my mind. I've used RH, Ubuntu (Debian based), and SUSE and all work just fine with Informix. - Any Intel processor you select and any number of cores will outperform the T-class Niagra CPU cores in the Sun T5…
Informix on Linux on VMWare
Hi It looks like I am going to have to migrate an IDS instance from Solaris to Linux. Current machine is a 16Gb dual chip SPARC T5120 with twin path, fibre attached disk (Raid 1) running IDS 11.5 on Solaris 5.10. Target machine is likely to be similar memory on a generic Intel p…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Multiple port configuration in the sqlhosts file
Hi Francesco, it's called "Wildcard adressing for TCP/IP connections". It allows the database server on a machine with more than one network interface cards to accept connections from clients on each network interface card (with the same port number). The wildcard in the sqlhost…
Re: "IDS seems to have shutdown cleanly"
I currently don't have IDS on my laptop.... mainly because I typically use it on VMs. But I usually do, and that problem usually is related to what we do with windows... A lot of virtual network interfaces, VPNs etc... so sometimes things get messy and we end up with weird setups…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
HDR question once again
Your only solutions would be to make your primary an ER root server and add another ER node (or a second primary-HDR pair replicated by ER from the current one), or you could use a third party replication product to create a secondary. Hit Software's DbMoto works with Informix, …
ER performance
IDS11.50 FC8, Redhat Linux. Three sites ER update anywhere. Apparently, we have one site ER constantly queuing data locally, which can not replicate data to another site fast enough. The output of the cdr list server and onstat -g nif are as following ( in the site where ER que…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Looking for a recommendation for a 3rd party data
Hi, Take a look at IBM Infosphere Change Data Capture, aka CDC. CDC provides heterogeneous replication among the major RDBMS products. It's very good, and it understands things like date format differences so you don't have to do anything. Cheers, Dick Snoke IBM ChannelWorks d…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Correlation between NETTYPE and VPCLASS
Hamran The 6 in NETTYPE define the number of poll threads you want to bring up. Generally, one poll thread need to run on one VP. Hence the num=6 in VPCLASS. Please refer the details to below text or informix information center. Regards. -Ping =================================…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
ER problem / bug? in 11.50.UC3
Madison Pruet wrote: > Jarrod Teale wrote: >> Madison, >> It's a test system - we will rebuild. Thanks >> Jarrod > > OK - I've opened a bug for this problem - 172306. There's no need to > open a case for this. I've tested a patch and we'll be including in the > build after tomor…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Re: Configure HDR over dedicated link / interface
On Aug 27, 6:15 am, jpren...@yahoo.com wrote: > On Aug 26, 6:48 pm, mohitanch...@gmail.com wrote: > > > Version: IDS 10 > > > How to configureInformixto run HDR threads on dedicated link to > > secondary server ? As I understand we'll have IP address for this new > > Interface Ca…
Configure HDR over dedicated link / interface
On Aug 26, 6:48 pm, mohitanch...@gmail.com wrote: > Version: IDS 10 > > How to configure Informix to run HDR threads on dedicated link to > secondary server ? As I understand we'll have IP address for this new > Interface Card, but how do we tell informix to send/receive logs ove…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: Logical Logs in Enterprise Replication
Navaid Arif wrote: > Hi All, > I am using Enterprise Replication on IDS10 UC5. I have 33 Logical > Logs for IDS, each of 5000 pages i.e. 20,000KB. > > Test >onstat -l > > IBM Informix Dynamic Server Version 10.00.UC5 -- On-Line -- > Up 09:00:11 -- …
Logical Logs in Enterprise Replication
Hi All, I am using Enterprise Replication on IDS10 UC5. I have 33 Logical Logs for IDS, each of 5000 pages i.e. 20,000KB. Test >onstat -l IBM Informix Dynamic Server Version 10.00.UC5 -- On-Line -- Up 09:00:11 -- 81408 Kbytes Physical Logging Buffer bufu…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: Replication Newbie Question
On Feb 16, 9:15 am, "Laurie Gustin" <LGUS...@utah.gov> wrote: > I learned that one possibility for replication delay may be that I am replicating data from a blobspace, and that process was very slow. That seemed ok, except that now the send q has been growing for over 24 hours…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
ER transactions queuing, NIF in BLOCK state
DL Redden wrote: > One of our servers in a 4-way update anywhere ER topology is currently > not staying caught up, i.e. transactions from the other three servers > are queueing but slowly getting sent and applied. The culprit seems to > be the network interface. An onstat -g nif …
asfcode
finderr -25582 -25582 Network connection is broken. This error might indicate that the database server has terminated, or a problem might exist on the network itself. Check that the network is functioning and that the server is still running. Art S. Kagel ----- Original Messa…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Re: IDS 9.x on Windows XP
David Reed wrote: > > I suppose there is not a workaround for this problem. Maybe to tell XP not > to disable the network interface? > > Why then that when I startup the machine without a network cable plugged in > the engine runs fine, can Informix not unattached itself from the…
Re: IDS 9.x on Windows XP
David Reed wrote: > > I suppose there is not a workaround for this problem. Maybe to tell XP not > to disable the network interface? > > Why then that when I startup the machine without a network cable plugged in > the engine runs fine, can Informix not unattached itself from the…
RE: IDS 9.x on Windows XP
David If you configure Informix to talk to the loopback driver then you will never be able to see the engine outside the server on which Informix is running because it is not going out on the network. With Windows if you disconnect the network cable then the network is not func…
RE: IDS 9.x on Windows XP
David If you configure Informix to talk to the loopback driver then you will never be able to see the engine outside the server on which Informix is running because it is not going out on the network. With Windows if you disconnect the network cable then the network is not func…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Informix Enterprise Replication
1) Er likes group names, not not the INFORMIXSERVER name 2) remove the onipcshm from the group... All members of a group are equivalent network interfaces to the server. A TCP and a SHM interface is not equivalent because the TCP is usable by a remote client and the SHM interfa…
Re: replication between 9.2 and 9.4--help me!!
The patch that you recently received should have addressed the problem with the CDRSITESxxxx environmental variable. I don't think that the issue with CDRSITES would have caused the cdrStart thread to go into a loop. I think that the hang would have been with one of the NIF thr…
HDR feedback
Just a little bit of feedback (for those interested). A while back I posted a reply to an HDR mail, saying that we have loads of problems with HDR, and I was about to give up on using HDR. We kept loosing the link between the 2, and I kept rebuilding the secondary server. W…
Enterprise Replication no start or stop
Time is differ from 130 to 150 seconds: 11:41:29 CDR NIF site: 1 <grp_master> clocks differ by 150 seconds U�ytkownik "Neil Truby" <neil.truby@ardenta.com> napisa� w wiadomo�ci news:2qg36eFurkquU1@uni-berlin.de... > Are the times of the two servers within 5 mintues of one anot…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Enterprise replication error
One of the reason for this failure might be that snoopy(log reader) and grouper components are down. The reason for this can be that ER replay/snoopy position might have been overwritten(logwrap situation). Please check the output of 'onstat -g ddr'. If the output shows (--Down--…
Survey: Interested in Perl, DBD::Informix?
We have had a question about starting a SIG focused on Perl and interfacing to the Informix Online and IDS environments. Perl-based web applications are typically 80x to 100x faster that the equivalent Visual Basic client -- even working in conjunction with a remote network web s…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
ER problem 9.3.UC2 / linux
Please open a case on this. I think that we found out that the fundamental problem was the required memory alignment for raw IO on Linux. "Tisha Shirah" <lshirah@simplified-nospam.com> wrote in message news:DgfQa.867$on5.328@newssvr23.news.prodigy.com... > Madison, > > I'm add…
Onbar and ISM
Weallans, Malcolm wrote: > > The Informix FAQ includes the following statement by Clem Akins:- > On 27th Feb 1998 clem@informix.com (Clem Akins) wrote :- > The Informix Dynamic Server v 7.3 (no longer called OnLine) will have a > version of Legato's NetWorker Server product bund…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
EMCion - Enterprise Management Center Ion ....,.
EMCion - Enterprise Management Center Ion http://www.emcion.org The Enterprise Management Center Ion (EMCion) is designed to bring NOC, Data Center, ESM, and NMS technologies together through a single interface. Because of the vast quantity of information, EMCion also melds sha…
EMCion - Enterprise Management Center Ion
EMCion - Enterprise Management Center Ion http://www.emcion.org The Enterprise Management Center Ion (EMCion) is designed to bring NOC, Data Center, ESM, and NMS technologies together through a single interface. Because of the vast quantity of information, EMCion also melds sha…
RE: Blocked:DDR
That's what I had thought initially, but when I looked at onstat -g act only the polling threads were active. It couldn't have been that easy, experiencing a problem that I had just read about in the news groups. It's seems to be fixed, I just wish I knew what caused the proble…
Re: Blocked:DDR
Andrew: If you were to look at the active threads running, onstat -g act, you might notice that CDRGeval# threads are consuming a sh*% load of CPU time. This was a bug in prior versions of IDS, ie. 7.30 family. It has to do with the sorting algorithm used by the evaluator thre…
Re: Blocked:DDR
Andrew: I had the same problem, here is how I solved the Block:DDR. ** NOTE: this solution may be too drastic for your situation. This solutions suggests dropping and rebuilding CDR *** 1. setenv CDRBLOCKOUT=1 2. recycle instance 3. unset CDRBLOCKOUT 4. DROP DATABASE syscdr 5…
Blocked:DDR
Was wondering if anyone could help me with this problem. We are running IDS 7.31.UC4 on HP-UX 11.0. ER is defined to replicate between 4 servers, 1 server is a Primary and the other 3 are Targets (Read only). One of our target servers has locked all user threads because it is B…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
Determining (failed) client connections
In article <390987B3.DB114EA6@yahoo.com>, Red Valsen <red_valsen@yahoo.com> wrote: > Is there a way of finding out which user is failing his login attempts, > and flooding my message log with that unhelpful "listener-thread: err = > -952: oserr = 0: errstr = : User's password i…
ON-BAR basic question
sveiga@my-deja.com schrieb: > Is it possible to make a remote backup using On-Bar ? On-Bar doesn't care about where the backup is going to. It interfaces with a storage manager that handles the actual backup. So what you need is a storage manager that can handle remote backups…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
Enterprise Management Center Ion
EMCion - Enterprise Management Center Ion http://www.emcion.org The Enterprise Management Center Ion (EMCion) is designed to bring NOC, Data Center, ESM, and NMS technologies together through a single interface. Because of the vast quantity of information, EMCion also melds sha…
Connecting to a Unix based Informix server with NT ODBC
I'm running Informix SE 7.23uc13 Runtime and SQL 7.20ue2 Runtime. I'm trying to connect an NT network and I have two questions. Are there any special instructions I should consider when starting sqlexecd and is it possible two have two entries in for the same server in the sqlh…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
cdr replication
I use 2 network interfaces,first one (server1) for 4gl application and the second for cdr replication (repliA). The sqlhosts is : server1 ontlitcp hostA1 sqlturbo g=group1 group1 group - - i=10 repliA ontlitcp hostA2 sqlreplA g=group1 group2 group - - i=11 repliB ontlitcp hostB…
ifx 2000
LoneRanger wrote: > trying to connect via inet from a pc to informix 2000 dynamic server i > get 908 can't connect error... > the ids is running fine and i have a database setup.. ican access > locally > using dbaccess -- no problems... only when try to connect via i-net > (test…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Enterprise Management Center Ion - EMCion
Enterprise Management Center Ion - EMCion http://www.emcion.com/ The Enterprise Management Center Ion (EMCion) is designed to bring ESM and NMS technologies together through a single interface. Because of the vast quantity of information, EMCion also melds shared information an…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: Error -908 on network connection (IDS 7.30)
Hello Octav, In article <7uhsn9$ngu$1@news.xmission.com>, Octav Chiriac <com@netinfo-moldova.com> wrote: > > Hi, > > I suppose you've forgot to post "netstat -na" > I'd like to see there something like: > tcp 0 0 192.168.0.229.:1526 *:* LISTEN > > If you…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
onSNMP?
An interface daemon to SNMP (Simple Network Management Protocol) tools so that they can monitor IDS servers. Art S. Kagel Top Cat wrote: > > What is onSNMP?…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
Linux: IDS LE replication, IECC & DBCockpit agents - WHEN?
"Art S. Kagel" wrote: > The problem with porting OnBar is that none of the Storage Manager vendors, > including Legato which provides Informix with the delivered Storage Manager > in IDS 7.3x, currently support Linux. According to the Legato Software Compatibility Guide, Release…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Sun IDS Server
Joshua George wrote: > > Hello, > I am trying to get some IDS engines up and running on Solaris 7 Intel > Edition and so far, so good. My question is: I have to be able to get Linux > clients to connect to the IDS box using some sort of web page. The idea is, > have the Linux b…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
FS:Fibre channel CLARiiON
I have open systems CLARiiON fibre channel arrays in stock available for immediate shipment. CLARiiON arrays will interface to NT and most UNIX platforms. All fibre channel equipment was used for approx. six months. We also carry all CLARiiON SCSI based arrays and drives. Please …
Onbar and storage pools
Hi, I was wondering if it is possible to configure onbar to use different storage pools for data and logical logs when using onbar with ADSM (or anything else but ISM). The parameters ISM_DATA_POOL and ISM_LOG_POOL in the onconfig file certainly look like ISM specific. How does …
Re: Informix on NT - IECC cannot connect to database
Sven, I couldn't find the origin of your question, but I have some experience in connecting IECC to a local database on NT. If you can tell me the symptoms that you're experiencing, I'll be happy to take a shot at it. Additionally, if you have had any experience, or manage to …
Cannot register Excalibur datablade
Hi, I have installed it on Compaq Proliant for testing: 1. Try to use 9.14UC2 instead. 9.13 is very bug version. 2. You should install code in following order. (should be in order!) clientsdk ius dbdk (datablade developer kit, it contains blademanager) Blade mod…
FS:CLARiiON fibre channel arrays
We presently have 4.0 Terabytes of open systems CLARiiON full fibre channel disk arrays with 9.0 GB drives in stock. This equipment was used for approx. six months for software evaluation. Pricing is anywhere from 40 to 60 percent off list prices depending on how much you buy. Th…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Re: Example sqlhosts file
Thanks for pointing me in the right direction - The release note do specifically say that the only supported protocol/interface is TCP/SOCKETS. Thanks again to everyone for their help - Despite the fact that all I needed was to Read The Manual (though I couldn;t find it), everyo…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
Multi-threading
We are using what I think is an older version of Informix (our manuals say version 7.2). Currently, I'm tyring to use informix-esql/c to interface a multi-threaded server with our Informix database. I'm having a great deal of trouble and - after spelunking through the manuals - I…
Slow connection to IDS Workgroup Server 7.30.TC7 on Windows NT 4.0 SP4
In article <7bu6vr$bvn$1@duke.telepac.pt>, "Jos� Vitorino Barata Ribeiro" <jribeiro@mail.telepac.pt> wrote: > We are having the following problem: on a customer site the connection from > Windows 95 and Windows 98 PC's to the Informix Online Dynamic Server > Workgroup Edition, …
informix/c++
We have build a database abstraction layer written in c++ which use Informix-CLI (an ODBC interface) to interact with the Informix database. ODBC calls are embedded into c++ objects. This solution is working fine for us since we couldn't use ESQL/C (I beleive ESQL/C is faster tha…
Connection to SE database
Informix Standard Edition issue: We're attempting to use I-Connect or ODBC to connect to an Informix server running on a Digital Unix box. The Unix machine has three physical interfaces. Two are utilizing internal IP addresses (not pingable) and the third is the routed address t…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
pre-compiled esql/c for solaris
I need subj badly! The problem is that need tcl-informix interface, but informix on my sparc(solaris 2.5.1) has neither escl/c nor c4gl :-((.. Furthermore, there is a shortage of some libraries, so they can't be compiled at the spot. If you've got subj or any idea on the matter -…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: Intersolve and Decimal?
In article <73861n$qa0@journal.concentric.net>, "Shannon Sellers" <ssellers@spike.tot.dor.state.co.us> wrote: > We are using Intersolve's ODBC driver 3.01 for Informix, Visual Basic 5.0 > and ADO. > > When we select a value from a decimal or money column that ends with 0.00 > (…
Wanted Data Warehousing Analysts with Experience
***********Wanted Data Warehousing Analysts with Experience**************** Wanted Data Warehousing Analysts with Experience for Southern California. Exciting company!! Need to have good communication skills to interface with management, vendors and users. Need to be U.S. Citi…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
setnet32 Performance Question
Are there any tuning parameters for setnet32? Were are using setnet32 on NT workstations to interface powerbuilder to Informix 7.22 through onsoctcp. Response/throughput is less than desirable. Running the same SQL statements through DBACCESS provides the (sub-second) response …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
You like BRILLIANTS? Then you will be interested!!!
JUST CLICK FOR YOUR BRILLIANT!!! http://absolutelyagency.lt/brilliantnet/ begin 600 A19715.jpg M_]C_X `02D9)1@`!`0$`E@"6``#_VP!#``\\*"PT+"0\\-# T1$ \\1%B48%A04 M%BT@(ALE-2\\X-S0O-#,[0E5(.S]0/S,T2F1+4%=:7V!?.4=H;V=<;E5=7UO_ MVP!#`1 1$183%BL8&"M;/30]6UM;6UM;6UM;6UM;6UM;6UM;6UM;6UM;…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
What is latest Engine to still support SQL Tool Char Based (Dumb Terminals)
I have a customer running Informix SE 5.x that I need to upgrade to the latest engine that still supports the SQL tool (ACE, PERFORM) with character interface for dumb terminals and at the same time will support a Win95 front end developed with Powerbuilder, VB, Access or Delphi…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: Re: shutting down and detached processes
>Carlos Costa e Silva wrote: >[SNIP] >> The problem is that in our 7.22 engine when we do the oninit sometimes (most >> of the time) there are some fglgo's that dont go down and the engine doesn't >> start: >> >> 04:14:32 listener-thread: err = -25572: Network driver cannot bind…
Re: shutting down and detached processes
Carlos Costa e Silva wrote: [SNIP] > The problem is that in our 7.22 engine when we do the oninit sometimes (most > of the time) there are some fglgo's that dont go down and the engine doesn't > start: > > 04:14:32 listener-thread: err = -25572: Network driver cannot bind a name…
Re: nr of processes in ol7.2 on aix?
Klaus Weitzer wrote: > > Can you tell me why there are 11 processes named oninit running on a AIX > risc machine? > Why, how can i reduce them and are they necessary? Each oninit process represents one of your Informix Virtual Processors. There are at least the following: cnt t…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Re: OnBar and XBSA Libraries?
d.berry@ukonline.co.uk wrote: > > Excuse my ignorance but should onBar work straight out of the box if I just > want to backup to a file system. We are running 9.13 on Solaris 2.5.1, > firstly I had the error "Could Not find XBSA Library /usr/lib/ibsad001.so", > surely out of the…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
Microsoft Internet Job Opportunity
Job Opportunity --------------------- Microsoft Site Server is a product that allows companies to deploy and manage Intranet and Internet sites. It includes a suite of services, including document publishing, knowledge management, site analysis, web applications, and commerce. -…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: backing up more then one instance
Mr Cheuk Kong Lo: >I am interested in knowing the storage manager in 7.3 too. We _are_ using >Legato and I have read the PDF document on informix web site about the >Universal server (which also includes oem version of Networker). >[...] If you already have Legato installed, the…
Re: backing up more then one instance
I used Legato Networker with Informix 7.23 over Solaris 2.5.1. There is, of course, a $5000 add on package for the Legato to interface with the Informix DB (or any DB). Then feel the immense pain of learning the pitiful horrible stinky Legato admin interface. But after that yo…
Re: backing up more then one instance
On Fri, 27 Feb 1998 12:38:58 +0000, "John H. Frantz" <john@rl.is> wrote: >The way I understand it onbar is some sort of interface between the >database and a backup program. You don't use onbar directly, but >intstead can use third party products that will support onbar. This i…
Re: backing up more then one instance
I am interested in knowing the storage manager in 7.3 too. We _are_ using Legato and I have read the PDF document on informix web site about the Universal server (which also includes oem version of Networker). I notice Informix has made a different interface, a few restriction (…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Enterprise Replication Problem
Hello, I am having a problem with transactions being backed up in the send queue on the primary and not being transitted to the target system. I get the follwoing error messages in the message log ..05:39:38 CDR NIF site Forced connection abort-clean_up has failed cleanup s…
Re: HELP: Informix Performance on Tandem Non-Stop
Bergero Claudio wrote: > > My problem sounds like this: > > Trying to add connections to Online up to 65-75 the server isssued this message in online.log: > > 16:43:35 listener-thread: err = -25574: Network driver cannot open the network device. > 16:43:39 NSF putlocal: t_open …
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Re: Connecting to OWG 7.2.2 for UNIX from ROM 2.10
Michael L. Gallagher wrote: > > Is anyone out there able to do this? I'm having a very difficult time. > I'm trying to connect using onsoctcp. Do I have to have multiple ifmx_online ontlitcp anzio ifmx_srvc > > ifmx_online_soc onsoctcp anzio ifmx_srvc Ch…
Re: I-Net = I-Connect ???????
In article <5r0c33$agd@cssun.mathcs.emory.edu>, CPeries@dynasty.com ("Peries, Chaminda") wrote: > > > Hi ! > > Does I-net & I-Connect refer to the same software ? > If not what exactly is the difference ? > > Thanks > > Chaminda I-Net is the native networking protocol used bet…
Onbar & Storage Managers
I am new to the Informix Online and I am trying to provide a way to manage backup and restore with On-bar. Here are some of the questions that I have: o Do I really need a storage manager (networker, netbackup). o Since onbar is a command line application, is it practical to wr…
I-Net protocol stupid design: a performance issue for networking.
I have been requested by one of the customers of the company for which I work about networking performance that I did not detect before during development until I put our software in the production process. After some searches, I have found that the most important problems lays …
Eror Starting SE Engine (unnamed pipes)
I'm in the process of implementing Informix Standard Engine V 7.12.UC1 on an SCO OS v5 computer. I've successfully started the SE engine using the TLI interface and TCP protocol. But this has proven to be rather slow on the local machine so I decided to start a local engine usi…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Informix access through firewall
John J. Kerwin wrote: > > I have the following set up for my WEB. > > external network NT 4.0 running IIS > ----firewall------ > middle network NT 4.0 > internal network running HPUX 9.0 Informix 5 > > My informix database resides on the internal network and I need to get > my In…
Re: Informix OnLine 7.2 for Windows NT Problems...
Tim Schaefer wrote: > > Not to intrude on your discussion, but I have to agree with Nils. I've > found connectivity for Informix via ODBC / I-connect to be a major > problem. The documentation is extremely bad, not to mention the set-up > interface. Informix networking is a re…
Re: Perl Interface
>From: Douglas Siamon <doug@sartre.minerva.bah.com> >Date: Mon, 20 Jan 1997 10:58:57 -0500 >X-Informix-List-Id: <news.32788> > >Does anybody know of a Perl interface for informix? (Solaris 2.5) Well, the 'obvious' one is DBD::Informix, which uses DBI, and which is available fro…
ODBC, INFROMIX, CLIENT-SERVER, etc.
Hi! I'm student of 5th year of Technical University in Gdansk (Poland). My examination for the obtention of a master's degree is coming soon. I'm working on "a problem of cooperation and use an heterogeneous aplications in distributed systems" (->databases). It is very difficult…
Re: Perl API
Kerry, Please note the additional information about Perl 5 for the FAQ. }From: Tim Simms <tsimms@intr.net> }Date: Thu, 5 Dec 1996 20:26:38 -0500 }X-Informix-List-Id: <news.31282> } }I did a bit of searching through this newsgroup and such, and didn't find }what I'm looking for.…
Re: Asynchronous Replication
In article <574i98$4d9@cssun.mathcs.emory.edu>, Carol Davies <cdavies@csc.com> writes >We had a demo of beta 7.2.2 from Informix yesterday for CDR. The GUI >configuration administration is indeed run from a NT PC, and then >configuration info is sent to Informix servers over the…
Need SW Developers/Managers
Hi, One of my clients, Management Recruiters of Portland, Oregon is recruiting for several positions in the computer industry for experts in object-oriented and client-server software development, network management and software project management. They asked me to let you all k…
US-CO-Boulder, Database Developer Wanted
ONLINE NETWORK ENTERPRISES, INC. - Boulder, CO Database Developer - Internet Applications Job Title: Database Designer--Internet Job Location: Boulder, Colorado Position Description: This position is responsible for consulting, designing and maintaining Web-interface databases…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: help with web-database
Conrad E. Muller wrote: > Why don't you just create a report that "exports" the data in HTML? > I've already done one project that way. If you are interested, contact > me and I'll give you the URL. Hello. Tomorrow i am presenting a networking plan for a major U.S. university. I…
INFORMIX DEVELOPER/DBA AVAILABLE IMMEDIATELY
TO : ALL EMPLOYERS FROM : TECHNA INTERNATIONAL CORPORATION 17777 MAIN STREET, SUITE 60/G2, IRVINE, CA 92714 (VOICE) : (714)852-9394, (FAX) : (714)852-9420 ENCLOSING RESUME OF ONE OF OUR CONSULTANTS WHO IS AVAILABLE FOR CONTRACT POSITION. HE IS AVAILABLE IMMEDIATE…
INFORMIX DEVELOPER/DBA AVAILABLE IMMEDIATELY
TO : ALL EMPLOYERS FROM : TECHNA INTERNATIONAL CORPORATION 17777 MAIN STREET, SUITE 60/G2, IRVINE, CA 92714 (VOICE) : (714)852-9394, (FAX) : (714)852-9420 ENCLOSING RESUME OF ONE OF OUR CONSULTANTS WHO IS AVAILABLE FOR CONTRACT POSITION. HE IS AVAILABLE IMMEDIATE…
Re: HELP! How to access informix data from sybase open client
In article <43pk5s$s8q@meaddata.meaddata.com> moumei@meaddata.com "MouMei Fu" writes: > I want to access an informix on-line database through tcp/ip network from > a sybase middleware called unidesktop which is a sybase DB-LIB open client > software. Can this be done?…
ODBC drivers
All, Ok I know there has been *plenty* about on this subject recently. I however did not save any of the discussions (or read all of them). I would however be interested in answers to the following questions: 1) Which ODBC drivers are the best ones? 2) Which should be avoided …
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Re: I-NET problem
In article <3842f3$pdm@studsys.mscs.mu.edu>, koktavy@studsys.mscs.mu.edu (peter j koktavy) writes: Will FTP's OnNet 1.1 PC/TCP work with INET-PC? I think so. We tried it as an implementation (along with Wollongong) and got good results. What was ugly was the interface. We ar…
Enterprise Management Summit '94 - New Product Announcements
Enterprise Management Summit '94 Santa Clara Convention Center November 14-18 Phone:800.340.2111 415.512.0801 Fax:415.512.13…
Re: I-STAR Questions
Duc Writes: >Hello netters, >I really don't know whether I have to buy both I-STAR and I-NET >for this: my application needs to access another Informix database on >different machine (called it A), machine A already had I-STAR installed, >while still be able to access the local …
Acessing Online with two hostnames
I have, an Informix Online 5.00, Star 5.00 running on a SCO ODT 3.0. have two network adaptors (fddi/ethernet) and I'm trying to enable remote access to the database for several I-NET clients. I created a sqlhosts file and started two sqlexecd deamons for two services (port 1525…
Re: Has anybody used Powerbuilder & Informix?
In article <tmlee.11.000B31D8@access.digex.net>, tmlee@access.digex.net (Ms. Terry Lee) writes: Has anyone used Powerbuilder to build an interface to Informix? How about using Powerbuilder to maintain an offline database & then import/upload to the primary Informix Database? …
Re: ODBC, VB & Informix?
In article <philpCs9sor.96r@netcom.com>, philp@netcom.com (Phil Perucci) writes: VMARK Software has a middleware product called HyperSTAR that provides a ODBC or API interface from VB to Informix. The HyperSTAR product has all that is needed (no need for db or network rtansport …
Re: Accessing INFORMIX ONLINE DB from a PC
I am also interested in this. Is there a product that works with the ODBC interface in Windows? I believe you can get this kind of thing for Informix running on a PC, but does it work across a network to UNIX machines? (Sun in particular) - Ben Kelley. -- "Help! My cat's…
problems with INFORMIX-STAR
Hi, I intended to use INFORMIX-STAR to work with remote databases. Everything works fine, if network works fine. But the way it reacts to network failures makes it almost impossible for real use. The connection to remote sqlexecd is established at the time when first command th…
Re: HELP using ESQL/C w/CC or ansi C
In article <2nrs2a$kcc@panix2.panix.com> rpcg@panix.com (R P Consulting Group) writes: anyone have any luck getting esqlc to work with the SUN C++ compiler? Yes, it can be done. If so how did you do the magic that you do? I use some makefile-magic. Toss in a little sed…
Re: Is informix a client-server DBMS?
jcantu@its.bldrdoc.gov writes: > What is I-Net PC? Is it anything >like Chameleon NFS? and Can Chameleon >substitute I-Net in this configuration? No, I-NET PC interfaces with Chameleon and products like it and allows the front end product or application to talk to the engine pro…
read this
Hello: We are looking for a client/server database for course management. This database will be installed on a database server which is connected to the campus network. The course database will be used to provide course and lecture information. Students should be able to do quer…
Re: ODBC with Oracle and Informix on the same server.
> > To clarify this and my other posting I have been informed that the > > Visionware product is actually two products. They have an ODBC > > product and a network transport product, sold independently, but which > > can work together. The network transport product replaces the…
Re: ODBC with Oracle and Informix on the same server.
Steven Reiss writes in reply to me:- > |> Unfortunately your consultant is basically correct. ODBC is a > |> translation mechanism to provide a single interface to client tools > |> requiring access to heterogeneous databases. It is NOT a network > |> product capable od doing t…
Re: ODBC with Oracle and Informix on the same server.
Someone (Jim Gordon?) said: > |> Unfortunately your consultant is basically correct. ODBC is a > |> translation mechanism to provide a single interface to client tools > |> requiring access to heterogeneous databases. It is NOT a network > |> product capable od doing the end to…
HELP FOR HELP DESK
We are interested in any INFORMIX-based application that can perform the following functions or contains the following modules: inventory and configuration management help desk/trouble ticketing performance management change management These functions/modules should be able…
Informix "rowid" question
I have a question regarding the use of the rowid field and how it is used in both OnLine and SE. The application that I work on is being ported from a networked database system, which carries the concept of sequential reads. The server that we will be interfacing the Informix DB …
Macintosh Client -> Informix (mainframe) database?
Path: emory!att!linac!uwm.edu!wupost!sdd.hp.com!elroy.jpl.nasa.gov!nntp-server.caltech.edu!flowers From: flowers@caltech.edu (Dave Flowers) Newsgroups: comp.databases,comp.databases.informix,comp.sys.mac.apps Message-ID: <flowers.691984106@delphi.bio.caltech.edu> Date: 6 Dec 91 0…
Re: Why use 4GL?
Steven Richardson writes:- > What are the real advantages of using 4GL? > > We are using Informix 4.0 products on RS/6000s and will probably > design a network interface for TCP/IP access, and use X-Windows/Motif > for our user interface. > > Do we lose anything useful? I …
Why use 4GL?
What are the real advantages of using 4GL? We are using Informix 4.0 products on RS/6000s and will probably design a network interface for TCP/IP access, and use X-Windows/Motif for our user interface. Do we lose anything useful? Thanks, Steven J. Richardson, Meri…
INFORMIX
Path: emory!sol.ctr.columbia.edu!cunixf.cc.columbia.edu!cs.columbia.edu!news From: duanyang@cs.columbia.edu (Duanyang Guo) Newsgroups: comp.databases Keywords: Trouble-ticket, database management Message-ID: <1991Jul11.204519.9424@cs.columbia.edu> Date: 11 Jul 91 20:45:19 GMT Sen…