Oninit® Archive
Results for “STACKSIZE”
oncheck warning,What impact will it have on the future?
Ok, I make sense. Althrough I can't see that parameter in ONCONFIG, but it really exists with default value. ------------------------------ chuan lu ------------------------------…
Informix 15 is out! Well sort of...
Hi Luis, Could you, before actually running the SQL, determine the session's sqlexec thread and then run "onstat -g stk <thread_id> -r 1" while the query is taking? Then do report the most common stacks observed here ... And for everyone else: happy to learn about any findings, …
Large memory segment vs smaller ones
No ONCONFIG changes are required. ------------------------------ Doug Lawry Oninit Consulting ------------------------------…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
restore through STDIO
HI, ifxclone can change the onconfig on the target instance E.g. it will turn off DIRECT_IO and can also change bufferpool entries! Regards, David. ------------------------------ David Williams ------------------------------…
Problems with temporary dbspaces
Hello, Change the DBSPACETEMP entry in onconfig file , separated them with semi colon (;), instead of comma (,). Rebounce ids, and see whether the error disappear. Hope it works -Fauziah-…
ontape does not finish the backup: tape full
TAPESIZE in the onconfig set to zero? Backups to disk running into a tape full and asking for a second tape should not happen. Hal Maner M Systems International, Inc.…
IDS 14.10.FC5 on Ubuntu 20.04 - can't start shm listener
Before I open PMR, does anyone have this problem: Normal installation, DBSERVERALIAS for shm connection: DBSERVERNAME ifxpri DBSERVERALIASES lo_ifxpri,ifxpri_shm sqlhosts with shm record: ifxpri onsoctcp 192.168.193.209 ifxpri lo_ifxpri onsoctcp 127.0.0.1 lo_ifxpri ifxpri_shm oni…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
Phys Log Size Inconsistency?
Disregard. I confused the ONCONFIG parm with the actual phys log. Forgot to actually run onparams! My total bad. DG…
RSS: Different # CPUs?
Those were my thought exactly. But, was uncertain whether RSS required identical settings in ONCONFIG as the primary. Thank you. DG…
IDS 11.70 - Archive detects that page is corrupt
Hi, Our database have error during backup. we find this message on af file. Archive detects that page 11:2897308 is corrupt. 22:22:41 IBM Informix Dynamic Server Version 11.70.FC1 Software Serial Number AAA#B000000 22:22:41 Assert Warning: Archive detects that page 11:2897308…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
onmode bug discovered (-wf)
Don't believe in a bug here. When starting the server he knows about the onconfig-file from the environment variable ONCONFIG. If you change this variable when the server is running it will not know the new value. Assuming that variable is only read once during the startup of th…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
ROOTDBS file
I did not find the AUTOLOCATE parameter in onconfig file as well as onconfig.std file also. Im using IDS 12.10 FC8 version…
Update Statistics
what kind of things could I check in the onconfig file. They are working on getting me IBM technical support help, but that will be a few hours away.…
IDS 12.10 - Query Slow
Hi, I means value on onconfig 12.10 same or better than value onconfig IDS 11.10. i don't copy onconfig file and put on IDS 12.10. I already rebuild of your statistics is highly. We don't have performance issue for overall our system, only a few program, especially program runn…
ON-Bar database server is dismissing the logical
Thanks Art and Martin. IDS bounce worked as onconfig was changed for LTAPEDEV earlier. Thanks, ~ Pravin Bankar…
DBSPACETEMP Parameter
Hi, The DBSPACETEMP Parameter in onconfig file create automatically the temporally dbspaces ? Or They must be created with onspaces utility. Thanks in advance.…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
Migrate from IDS 11.50.UC6 to 11.70.FC8W1
Here is few more details: IBM® Informix® 11.70 Migrating from 32-bit to 64-bit database servers If you are migrating from a 32-bit version of Informix® to a 64-bit version of Informix or reverting from a 64-bit version of Informix, you might need to follow additional steps to upd…
Best value for parameter STACKSIZE
Hi, Recently, I have an error in one of the our instances: Assert Failed: Thread stack overflow detected. The origin was an extensive query with a lot of joins. I know that the parameter STACKSIZE is related to this error. I changed the default value 64 (for 64-bit), to 128. M…
Best value for parameter STACKSIZE
Hi, Recently, I have an error in one of the our instances: Assert Failed: Thread stack overflow detected. The origin was an extensive query with a lot of joins. I know that the parameter STACKSIZE is related to this error. I changed the default value 64 (for 64-bit), to 128. M…
Error System Block
Double your stack size ? <quote> 14:13:53 Assert Failed: yield_processor: Stack overflow in thread 67767 </quote> The stack trace from the af is always useful, if you are using datablades and/or custom UDRs the default stacksize is usually too low Cheers Paul -----Original Me…
BTS fails after ontape Restore
Hi Mark, Backup is done by 'ontape -s -L 0' Restore was done with 'ontape -r' No extra special parameters. And as I was typing this email, I was collecting the appropriate BTS-related lines from the 4 onconfig's in play (we use a special 'backup' onconfig for ontape). Lo and b…
Root db space fills up
as metioned above, maybe you need set TEMPTAB_NOLOG in you onconfig file…
Error Message in online.log file
Hi André. What setting do you have for ALRM_ALL_EVENTS in the $ONCONFIG file? I have found "alarmprogram.sh" can loop if set to 1. Regards, Doug Lawry…
RSS not working
Fee disk space on the chunk partition ok on the RSS server? Can you post your onconfig?…
Setup HDR
the onstat -c|grep STACKSIZE is : priamry : STACKSIZE 64 secondary : STACKSIZE 64…
Physical Log size 2000 is too small
Hi, the onconfig we are using is from a inf version 9.7 wherein no PLOG_OVERFLOW_PATH located in it. I tried adding it to the onconfig and put a location but the inf instance when restarted still always fails. As for the onmode command we are always using onmode -ky maybe it's b…
ERROR doing ontape
Thanks for your response! So, is it possible to create a new dbspace then set it in $ONCONFIG and restart the instance? best regards…
virtual segment question
Did you try to increase the number of locks in the LOCKS parameter in Onconfig? Lloyd…
ontape error message
Increase the value of TAPESIZE parameter in onconfig and try the backup. Lloyd…
Onconfig name
Hi, I am developing a JDBC application, and need to read from within SQL the onconfig environment variable. From with IDS 11.70, I can extract the need information using the query: select trim(env_value) env_value from informix.sysenv where env_name = 'ONCONFIG'; The code nee…
JDBC client thread waits forever
Hello, I have a servlet application that communicates via JDBC with IDS. Periodically, the web server machine runs up to 100% CPU and stays there. The database server's CPU load is not excessive when this happens. Client machine (a web server, but "client" with respect to IDS):…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Problmes using ontape with an IBM TS2900 changer
The TAPEDEV section in the onconfig is as follow: TAPEDEV /dev/IBMTape0 TAPEBLK 512 TAPESIZE 0 We have played with the TAPEBLK from 512 to 4096 to no avail.…
listener-thread: err = -25573: oserr = 72
IDS: IBM Informix Dynamic Server Version 11.50.FC6 -- On-Line (Prim) -- Up 3 days 04:39:41 -- 6209616 Kbytes OSLEVEL: AIX 6.1.0.0 Need any thoughts on this error we have received. Has anyone else received and diagnosed the problem/error? Is the Stack Trace a new standard for thi…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
How to set up temporary space per session
True, but I have noticed that you need register previously the temporary dbspace in onconfig file, I thought there was some way to make the settings "on the fly", by session. Roger…
recover SQLHOSTS file
Do the onconfig files also have that info?…
Auto Update Stats
Hi, I have one more query. I have the below entries in onconfig file for AUS AUTO_STAT_MODE 1 STATCHANGE 10 USTLOW_SAMPLE 0 Now all my tasks(mon_table_profile,Evaluator and Refresh) running fine at scheduled time. Now when I remove the above entries in onconfig file, still al…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Page size
Where do you set the page size when configuring Informix? I don't see it in the ONCONFIG anywhere.…
Re: manually edit onconfig?
You should never install the new version over the current one. If something goes wrong in the upgrade you'll have much more work to recover. Regards On Mon, Dec 17, 2012 at 6:38 PM, June Nebab LKINY <jnebab@gmail.com> wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. I…
RE: manually edit onconfig?
I would give a try to the new onconfig_diff utility, it seems to help you identify and correct some of them.... Check it out! https://www.ibm.com/developerworks/mydeveloperworks/blogs/idsteam/entry/how_to_use_the_onconfig_comparison_tool_onconfig_diff3?lang=en Regards. Alexand…
Re: manually edit onconfig?
I'm a big fan of copying the current settings into the new ONCONFIG file. It gives you a good chance to see the new parameters, like those you mentioned - all of which were available in 11.70.xC5 BTW, so someone used an older ONCONFIG instead of editing the new one last time. By…
Re: manually edit onconfig?
Figure out what each of the new ones do, whether you want to use them or not, then add them to your old onconfig. Ideally on a test environment. j. On Dec 17, 2012, at 1:38 PM, June Nebab LKINY wrote: > Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version o…
manually edit onconfig?
Planning an upgrade to 11.7UC6GE from 11.7UC5GE. Installing new version on same $INFORMIXDIR and on same server. I noticed new onconfig params (ie: AUTO_READAHEAD, NUMFDSERVERS, etc) that are in the UC6GE onconfig.std that are not in my $ONCONFIG. What is the proper way to dea…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Error # 40002
Also set AUTO_REPREPARE 1 in your $ONCONFIG file. Regards, Doug Lawry…
"Not in transaction", but looks like transactions
Stumped by an error that Informix is delivering up the stack through Hibernate. I know this is an Informix forum and not a Java forum, but a snippet of the stack trace (edited) will help show why I'm confused: [#|2012-09-24T09:24:21.563-0400|WARNING|glassfish3.1.2|org.hibernate…
Re: help with informix on windows oncheck -pr erro
ok sounds like silly question but how do i find out what ONCONFIG variable is on windows ? which is likely to be correct set ONCONFIG=oncfg_apecert.0 ::set ONCONFIG=ONCONFIG.apecert…
doubt about parameters (PDQ)
Sorry people, I meant the MAX_PDQPRIORITY 100 onconfig parameter.…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
NOFUZZYCKPT: onconfig parameter or environment variable?
Is NOFUZZYCKPT an onconfig parameter or an environment variable? Is there any definitive documentation? Still running IDS 10 on Linux.…
Testing the 'free' versions - moving from Dev edition to Innovator-C
Art, thanks - I've gone for the separate INFORMIXDIR install (just had to change $INFORMIXDIR, $PATH and some paths in $ONCONFIG) and it's come up just fine.…
Spatial Data
hello reading thru the manual states that the ONCONFIG parameters for SBSPACENAME and SYSSBSPACENAME must be set for the default sbspace. We are running an HDR pair and have the parameters set on the Primary Server - does it also need to be set on the Secondary Instance ? thank…
unstable server
I have one Windows 2008 server running 11.70.TC1IE that requires a restart 2-5 times a day. The web service (IIS) and all com objects and other programs and my services are running on the same server. The ODBC driver is the one from the bundle. The trouble seems to begin with th…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
ontape -p/r with changed ROOTPATH
Jack Parker Wrote: ================================================================================ Not sure if you noted that you also need to change your $ONCONFIG = ROOTPATH to point to what is on the backup image. j. ==========================================================…
question about Query with joined view
Have you tried "IFX_FOLDVIEW 1" in your environment or $ONCONFIG file? Regards, Doug Lawry…
TimeSeries
On Dec 17, 11:58 am, Clive Eisen <cl...@serendipita.com> wrote: > IBM Informix Dynamic Server Version 11.70.FC1IE Software Serial Number > AAA#B000000 > > So I'm having a play with this and TS > > I can reliably cause the engine to AF > > 11:14:37 stack trace for pid 24588 writt…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
sqlerr:-243 and isam err:-111 in esql/c
This "may" be a good place for USELASTCOMMITTED set to all in the onconfig.…
Primary Slowness when RSS is active
You need to set LOG_STAGGING_DIR parameter in onconfig of the rss…
wait for mutex ... IDS hang....
Frank wrote: Thanks a lot Jacques!! I did the trace and found the session( see detail info_1 below). Its father process 733226 had already been stopped. But the session is still there and running... , onmode -z 86754 hangs., So the final solution is to reboot the IDS ? By the …
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Re: RE: new onconfig parameters added onconfig fil
Typically, I make a copy of the onconfig.std, naming it something like cheetah_online. Then I open up both the old and new onconfig, side by side, and copy from old to new. Obviously, the new onconfig has new params that were not addressed in the old onconfig and may have elimina…
Re: RE: new onconfig parameters added onconfig fil
Isn't that what I said? "If you simply just bring up the instance using your old onconfig, I believe that you will get whatever the default is for the new parameters, even though you do not mention them in your old ONCONFIG." -----Original Message----- From: ids-bounces@iiug.or…
new onconfig parameters added onconfig file 11.5
hello folks Can any one tell me at what stage the new onconfig parameters are added to the onconfig file when upgrading from 11.10 to 11.5. I have converted two instances from 11.10 to 11.50 One onconfig file has the new parameters at the end of the file the other doesnt have any…
Re: performance improvements for dbimport?
Thanks for all your valuable input. I changed some parameters now: 21:09:27 Onconfig parameter BUFFERPOOL modified from size=2K,buffers=262144,lrus=8,lru_min_dirty=5.0,lru_max_dirty=10.0 to size=2K,buffers=524288,lrus=8,lru_min_dirty=10.0,lru_max_dirty=50.0. 21:09:27 Onconfig p…
BACKUP_FILTER in onconfig
Hello, when I using BACKUP_FILTER in $ONCONFIG, parameter for "The tape block size, in KB, for backing up logical logs" is NOT LTAPEBLK, but it is TAPEBLK. Everything work fine (LTAPEBKL for logical log) when I turn off BACKUP_FILTER ... This is happening with ontape, with BAC…
garbage text in SHMNOACCESS parameter
On Jan 21, 8:15 am, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > Just a guess. What's the hex value for that string? > grep ^SHMNOACCESS onconfig SHMNOACCESS �����������" ������� grep ^SHMNOACCESS onconfig |cut -c17- �����������" ������� grep ^SHMNOACCESS onconfig…
(-9791): ERROR: Routine execution trap -- procname
We have migrated IDS Version 11.50.FC3W1 to IDS Version 11.50.FC5X1 . After version migration we got errors frequently (-9791): ERROR: Routine execution trap -- procname=<procname> procid=1924 reason: mem . We have recreated all procedures and run update statistics too but issue…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
DYNAMIC_LOGS in ONCONFIG
Good afternoon, We occasionally have a programmer than needs a large amount of log space to move a very large table. Instead of fiddling with the HTXHWM and LTXEHWM in the ONCONFIG file, has anyone successfully setup DYNAMIC_LOGS with IDS 10.00 on HPUX? Where would the dynamic …
Unsufficient buffer size for error message
Hi Please check your online.log and check also your onconfig file. thanks.…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
oninit fails reporting problem with DBSPACETEMP
But in my ONCONFIG file, i have mentioned the tape device as STDIO…
Lies, Damn Lies and Statistics...
On Jan 27, 2:04 pm, Ian Michael Gumby <im_gu...@hotmail.com> wrote: > On Jan 27, 12:35 pm, lfin...@ca.ibm.com wrote: > > > Why would it matter if the OS tries to schedule two different threads > > at the same time on different CPUs? Why would this be any different > > than if th…
Changing TAPEDEV from script
sed -e 's/^TAPEDEV/TAPEDEV NEW-TAPEDEV/g' onconfig > onconfig.other export ONCONFIG=onconfig.other after finishing just set the ONCONFIG to your default and delete onconfig.other Sebastian…
Re: sqldetach not returning
> What is the stack for the thread calling sqldetach and the output of > onstat -g stk <tid> for the corresponding IDS thread? i´ll try to collect this information when the problem happens again.…
Onconfig parameter STACKSIZE
Guys, Did a test , sounds our server only takes a minimum size of 64K of STACKSIZE, 32K NOT not accepted. ( our informix is 32 bit and OS is 64 bit) Any idea or suggestions ? Thanks, Frank informix@dora $ onstat -version Program Name: onstat Build Version: 11.10.UC2 Build Num…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
Re: Weird one
> From: pokeyman76@yahoo.com > Subject: Re: Weird one > Date: Fri, 26 Sep 2008 08:31:09 -0700 > To: informix-list@iiug.org > > You lost me there Gumby. > Never heard of cpu's having stacks. I've heard of processes having > stacks and threaded processes actually have multiple stac…
Re: Weird one
Read the Solaris Internals book by Jack Mauro ??? Ian Michael Gumby wrote: > Just out of curiosity, and this may not be at issue... > > On a multi-core /smp Linux box, does each CPU have its own stack or does > it share the same stack? > > If they share the same stack, how does …
Weird one
Just out of curiosity, and this may not be at issue... On a multi-core /smp Linux box, does each CPU have its own stack or does it share the same stack? If they share the same stack, how does one track to see if their are thread contention issues. Meaning if Thread A from the s…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
IDS 7 -> 11 upgrade problems
"The Durster" <seandurity@gmail.com> wrote in message news:de8a158d-2fa5-4746-9087-6828fe17edc7@79g2000hsk.googlegroups.com... >> To me, it looks like the error is in the prepare. (That is the part of the call stack where it starts to call error handling routines.) I wonder if s…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Parameter tuning?
WH MAX wrote: > Pls see the instance profile and shared memory parameters below. > The problems I noticed are > 1. low read-cache-hit 35% > More BUFFERS. > 2. low write-cache-hit 79% > Doesn't matter. > 3. a lots of bufwaits and seqscans > Could be anything, but most likely an …
874 exception error
Hello list, Executing a procedure the engine response "874 general exception error has ocurred in the optimizer"; online.log say ... Assert Failed: Exception Caught. Type: MT_EX_OS, Context: mem IBM Informix Dynamic Server Version 11.10.UC1 Who: Session(123, informix@svc01, 375…
understanding oncheck -pp
Vartika - You can post the portion of your assert failure that references the bad page here for the forum's review, but you are best served by calling Informix Technical Support. Much of the information in the af.XXXXX file is for internal use - most notably the stack trace of t…
Re: unkillable sid's
> > If the thread is continuously running it could be moving between vps. > At least it is a start. > It's possible, it just would depend on what sort of loop it was in, if it was in a loop that did a mt_yield call then yeah you might have some sort of reasonable stack. However…
Re: informix 9.3 to 9.4 issue
analog todd wrote: > Hello, > I'm having some serious issues with a production instance of Informix > and I can't figure out why. > I'd been running 9.30.UC7 for over a year solid, no complaints. > Monday night, I installed 9.40.UC8 and its been awful. What am I > missing? I've…
checkpoints Excessively slow
ABDESLEM ARBAOUI wrote: > hi all > > we have IDS 7.31 UC4 on unix with 2GB Memory > Platform info will normally help also: Sun, AIX, HP-PA, HP-Itanium, x86 Linux? First thing I'm going to suggest is an upgrade at least to 7.31UD8 if not going whole hog and moving to 11.10! Bey…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >> mosserp@wellsfargo.com wrote: >> >>>>> RESIDENT 0 # Forced residency flag >>>>> >>>>> >>>> (Yes = 1, No = >>>> >>>> >>>>> >>>>> >>>>> >>>> Don't know HP model numbers, but it this is a PA-RISC machine, you >>>> almost have to …
RE: onconfig recommendations
> mosserp@wellsfargo.com wrote: > >>> RESIDENT 0 # Forced residency flag > >>> > >> (Yes = 1, No = > >> > >>> > >>> > >> Don't know HP model numbers, but it this is a PA-RISC machine, you > >> almost have to set RESIDENT to -1 to prevent poor performance > >>…
Re: onconfig recommendations
mosserp@wellsfargo.com wrote: >>> RESIDENT 0 # Forced residency flag >>> >> (Yes = 1, No = >> >>> >>> >> Don't know HP model numbers, but it this is a PA-RISC machine, you >> almost have to set RESIDENT to -1 to prevent poor performance >> due to the >> archi…
RE: onconfig recommendations
> > RESIDENT 0 # Forced residency flag > (Yes = 1, No = > > > Don't know HP model numbers, but it this is a PA-RISC machine, you > almost have to set RESIDENT to -1 to prevent poor performance > due to the > architectures restrictions of only four active shar…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
[Fwd: Re: onconfig recommendations]
Kennedy, Randy wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for given > platform. > > Current Server: HP rp5405 …
Re: onconfig recommendations
On Jan 2, 11:09 pm, "Kennedy, Randy" <RKenn...@scottsdaleaz.gov> wrote: > Would like to receive some feedback on our onconfig setup for current > platform. This is the 3rd physical server that the database has moved > to and just want to ensure we are using the best settings for…
onconfig recommendations
Would like to receive some feedback on our onconfig setup for current platform. This is the 3rd physical server that the database has moved to and just want to ensure we are using the best settings for given platform. Current Server: HP rp5405 4-Way (650 MHz) with 8GB RAM. 1 …
Newbie question-please don't shoot me
I have a newbie question. Please pardon my lack of knowledge with this. I have a Unix server (HP) that houses 2 9.4 Informix database servers (IE: there are 2 separate onconfig files that have unique INFORMIXSERVER parm values). The informix engine stopped (I think because the un…
Informix onconfig file configuration
Hello, We recently moved from a quad proc (hyper threaded to 8), 8GB RAM to a 2 socket dual core, 16GB RAM server. In order to maximize the cores and RAM what entries need to be modified, if any? Thanks, Jared…
Re: long checkpoints
I'm just curious: What's the row size of the table that's getting all the inserts? And how does that compare to your system's page size? Apostrof wrote: > hi, > i have some problem with the long running checkpoints in IDS 7.31.UD8 > on HP/UX. > every day a batch utility making…
Re: long checkpoints
On 21 Nov., 14:01, Apostrof <abdullah.ako...@gmail.com> wrote: > hi, > i have some problem with the long running checkpoints in IDS 7.31.UD8 > on HP/UX. > every day a batch utility making hig volume of insert and updates. and > this batch works about 5-10 minutes(checkpoint times…
Replication performance problem related with DRINTERVAL
On Nov 8, 8:58 am, Yasar Akman <akman.ya...@gmail.com> wrote: > Hi, > > we are moving our application from tru64 to aix. Our application is an > real time application and performance is very important. We are doing > some tests on informix on the new platforms. But replication s…
Re: Kill Update Statistics
On 17 Oct, 16:31, "Art S. Kagel" <art.ka...@gmail.com> wrote: > On Oct 17, 8:05 am, "Habichtsberg, Reinhard" <RHabichtsb...@arz- > > emmendingen.de> wrote: > > Is there any way to kill a running update statistics. > > > UPDATE STATISTICS HIGH FOR TABLE foo (bar) DISTRIBUTIONS ONL…
KAIO: error in kaio_WRITE, kaiocbp = 0xfb84a1d0, errno = 0
Hi all, IDS 10.00.FC5 OS: Red Hat Enterprise Linux AS release 4 (Nahant Update 4 (2.6.9-42.ELsmp with Hyper threading, 64 bit) HDR secondary has crashed a few times with the following errors coming up in the online.log: 13:36:21 KAIO: error in kaio_WRITE, kaiocbp = 0xfb84a1d…
BAR_MAX_BACKUP and BAR_WORKER_MAX
What's the difference between BAR_MAX_BACKUP and BAR_WORKER_MAX. Both seem to be doing parallel/concurrent log backup. Which one should be specified in onconfig ?…
Not enough space for parser stacks
Hi, This error -11060 usually indicates that the application is running out of resources (memory, stack). Maybe you could try: - Increasing the env variable INFORMIXSTACKSIZE before running the application, to overwrite the STACKSIZE on the server's ONCONFIG file. Check DBSPA…
Informix crash
On Jul 29, 6:07 am, "Neil Truby" <neil.tr...@ardenta.com> wrote: > IDS 10.0FC5 on AIX 5.3 > > Don't suppose much can be told from this, but has anyone any ideas about > this failure yesterday?: > Well one of the most important pieces of the AF file doesn't appear to be working, …
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: Digital UNIX V4.0F + 7.31.FD1 Performance
Thank you, today on evening we make this changes in $ONCONFIG, restart the machine and hope it works! Greetings from Austria…
Informix Instance Crash
Hi, for a first (quick) analysis, the interesting part of the af-file is the function call stack trace of the thread that reported the problem. Usually this is at the beginning of the af-file, right after a repetition of the af-message as seen in the online.log file. Depending …
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Checkpoint times
Hi Art, Informix mirroring is active, no RAID. Raw Devices with KAIO are used. But maybe you were right about the slow disks, I have measured datatransfer with dd and the disk with rootdbs seems to be slow. Mirror disk is reacting fast. I will shutdown the primary chunk and work…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
dbexport DOWN
Hello to all: Dbexport of my BDs does not finish satisfactorily. The error message that shows to me is the following one: No owner present for the table in systables Also in some ooportunidades the instance falls and it shows the following message to me of error: 00:36:05 Ass…
onconfig problem
when i try to initialize server using oninit following message appears on screen "ONCONFIG can only specify a simple filename whith no path components" plz do replay me how to solve this one…
how to fix the error "hpkaioaddseg: ASYNC_ADDSEG.
R U exporting env. variable KAIOON=1 ? Post ONCONFIG, it might help to advice. --- NETSKY LIAO <liaosnet@126.com> wrote: > HP-UX11i,IDS9.4.FC8X5,with 32G mem,use kaio > > 22:37:14 IBM Informix Dynamic Server Version 9.40.FC8X5 > 22:37:14 Who: Session(6, informix@, 0, 0000000000…
Erro oninit
Ajudem-me, este é o log quando rodo oninit. [informix@logix log]$ tail prd.log 08:49:04 IBM Informix Dynamic Server Version 9.40.UC3 08:49:04 Who: Session(0, @, 0, (nil)) Thread(1, main_thread, 0, 1) File: neterrb.c Line: 658 08:49:04 stack tr…
Re: onmode -Y
On 16 Apr, 15:24, jpren...@yahoo.com wrote: > On Apr 13, 8:04 pm, Floyd Wellershaus <fwell...@yahoo.com> wrote: > > > > > > > First stack, while it was doing an insert to one table: > > Stack for thread: 660906 sqlexec > > base: 0x07000003989dc000 > > len: 36864 > > pc: 0…
Re: onmode -Y
Yea. That was all the stk showed however. We did a reboot this morning, ( standard Monday morning thing ), and these are running great. So either some kind of memory problem, or during the day, something is holding resources that causes this. ======================== -<<Floyd …
Re: onmode -Y
On 14 Apr, 02:04, Floyd Wellershaus <fwell...@yahoo.com> wrote: > First stack, while it was doing an insert to one table: > Stack for thread: 660906 sqlexec > base: 0x07000003989dc000 > len: 36864 > pc: 0x0000000100056518 > tos: 0x07000003989e2c70 > state: running > …
Re: onmode -Y
First stack, while it was doing an insert to one table: Stack for thread: 660906 sqlexec base: 0x07000003989dc000 len: 36864 pc: 0x0000000100056518 tos: 0x07000003989e2c70 state: running vp: 4 0x0000000000000000 Next stack, when the process is hung, while it is doin…
onmode -Y
On Apr 13, 10:07 am, Floyd Wellershaus <fwell...@yahoo.com> wrote: > I've been monitoring a problem process, and issued an onmode -Y sessionid 1, for the session that process is using. > > When the process hit the next query, it output to the sqexplain.out.sessionid file. > > But…
Server fails to come online
Zokovic, I've looked & killed all oninit process, but when i again run oninit -v i get the following message: Checking group membership to determine server run mode...succeeded Reading configuration file '/home/informix/etc/onconfig.suse'...succeeded Creating /INFORMIXTMP/.infx…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
IDS 10.00.xC6 performance
Use 'onstat -g ath' multiple times to see if relevant Ix threads (sqlexec) are doing what they should be - running. If they aren't (and if they aren't 'ready' frequently), then they're waiting on something; either you're seeing already from this onstat what this might be and can…
IDS 9.49 UC2 -> UC7 PDQ changes?
Schuran, Sven said: > Hi, > > We changed from UC2 to UC7 on a Linux box with 2.4 kernel. > > With the same configuration, UC7 runs out of memory, but I don't know why. > > PDQ is enabled. When I disable PDQ everything works fine. > One thing, the working sessions nearly all have …
RE: Listing all the tables in using a dbspace in Informix
> Make sure $INFORMIXDIR and $ONCONFIG are set and that you have > permissions with your login ID to access them. There is also system > tables that can give you this information. System tables which can list out all the tables in a particular dbspace ?…
Re: onconfig
Hello, apart from editing ONCONFIG directly, some parameters are dynamically changeable: Usage: onparams ... -m <param> <value> ... -m - Modify the value of one of the following configuration parameters: AFFAIL, AFCRASH, AFW…
RE: onconfig
I don't run onbar, but I suspect you're right. LTAPEDEV, etc. would also probably be in this group as well. Either way, restore the old onconfig and you're OK. It may be a good idea to check the permissions on the file before you're done, though... --EEM -----Original Me…
Re: onconfig
I think the onbar config parameters can be changed on the fly as well. ----- Original Message ----- From: "Everett Mills" <eemills@nationalbeef.com> To: <informix-list@iiug.org> Sent: Friday, February 09, 2007 11:45 AM Subject: RE: onconfig > Stan- > TAPEDEV, TAPEBLK and TAPESI…
RE: onconfig
Stan- TAPEDEV, TAPEBLK and TAPESIZE can be modified on the fly through onconfig. Restore your old onconfig and you should be fine. --EEM -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of Stan Sent: Friday, …
onconfig
Hello. What will happen when during work (online state) IDS unfortunately someone modify onconfig. Which paramaters takes effect immediately (without restrart IDS). Thanks in advance Stan…
Re: IDS Performance Problem
Thanks a lot everyone, for your valuable comments and helping me in tuning my IDS. I will implement these changes very soon. Regards, Navaid Arif ----- Original Message ----- From: Navaid Arif To: ids@iiug.org ; classics@iiug.org ; peoplemix@iiug.org ; informix-list@iiug.…
Informix produces error -1263 after system time is changed
Also I forgot to mention that the onconfig USEOSTIME is set to 1 (gets time from the host)…
Assert Failure
hi , I am gettting this error. Any body having any idea.... 2:42:54 Checkpoint Completed: duration was 0 seconds. 02:42:54 Checkpoint loguniq 1200, logpos 0xf018, timestamp: 0x119a27 02:42:54 Maximum server connections 0 02:42:54 On-Line Mode 02:43:11 Logical Log 1210 Com…
Re: infdump
couldn't we at least ask him for a tiny snippet of his online.log - maybe there's more wisdom in such file than you might imagine. Tip: set MSGPATH (in onconfig) to ... ... and don't forget to restart the engine ;-)…
HELP : All logical logs are FULL
Hi All Thanks for your response. I solved the "All logical logs are FULL" . I did the following : ShutdownServer : onmode -ky Change Onconfig : LTAPEDEV in the onconfig to /DEV/NULL Restart Server : oninit After RECOVERY : onmode -ky Change Onconfig : LTAPEDEV change…
Re: Performance tuning suggestions needed
On 1 Oct 2006 20:10:51 -0700, calyanram@hotmail.com wrote: >this my onconfig file. > ...onconfig file snipped... Please give us a bit more information. Hardware specs (number of CPUs, memory, OS. etc.) would be good . . . JWC…
SHMADD and EXTSHMADD
Hi, What is the difference between SHMADD and EXTSHMADD? We know the meaning of the SHMADD onconfig parameter. Thanks, Khaled Bentebal ConsultiX Email: khaled.bentebal@consult-ix.fr…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
DBSPACETEMP
Hello All, Just a quick question for you to ponder. Is it possible to include random dbscpaces in the DBSPACETEMP parameter with the onconfig file to prevent space problems in the temp dbspace when creating indexes etc. on very large tables?…
alter from serial to int crashes server
Why would this (converting doc_id from type serial to type integer): alter table docs modify doc_id integer not null constraint doc_nn1; cause this: 20:33:48 stack trace for pid 6469 written to /data/docs1/informix/af.d9dcc4eb 20:33:48 Assert Failed: No Exception Handler 20:33…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Down Informix -
HP-UX 11.11 Informix 7.31 FD 8 =========================================================== The instance informix key and occurred the following message of error: 10:44:05 Assert Failed: No Exception Handler 10:44:05 Who: Session(11289017, unique01@c0a8646f, 1388, -609530840) …
Down Informix -
HP-UX 11.11 Informix 7.31 FD 8 =========================================================== The instance informix key and occurred the following message of error: 10:44:05 Assert Failed: No Exception Handler 10:44:05 Who: Session(11289017, unique01@c0a8646f, 1388, -609530840) Th…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Re: ONCONFIG and AIX
Hi, I would enable KAIO, too. Apart from KAIO the B-Tree Scanner usually benefits from some configuration: >From my experience increasing threshold (default: 500) reduces I/O significantly, enabling range scans (rangesize=500), too. BTSCANNER num=1,prio=low,threshold=50…
RE: ONCONFIG and AIX
> -----Original Message----- > From: informix-list-bounces@iiug.org [mailto:informix-list- > bounces@iiug.org] On Behalf Of tomcaml@yahoo.com > Sent: Thursday, July 27, 2006 12:57 PM > To: informix-list@iiug.org > Subject: ONCONFIG and AIX > > Hello All, > > I am looking for feed…
ONCONFIG and AIX
Hello All, I am looking for feedback, comments, etc. We are currently on IDS 10.FC4 on HP-UX 11 - migrating to IDS 10.FC5 on AIX on an LPAR partition on the i595 I have gotten this message in the log while performing some loads/alter tables/indexes, etc in development phase.…
Parametro TXTIMEOUT
Hola, quisiera saber si alguno de ustedes me puede informar que quiere decir el parametro del onconfig TXTIMEOUT 0x12c, a cuantos segundos se refiere. Gracias de antemano. Salu2...…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Stored procedure failing after IDS4 server crash
1/ 15:29:42 Assert Warning: I/O error, Primary Chunk '/prod_u02fs/physdbs' -- Offline 15:29:42 IBM Informix Dynamic Server Version 9.40.FC6 15:29:42 Who: Session(1, root@cscs_prod, 0, 700000030310028) Thread(7, main_loop(), 7000000302ce028, 3) …
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Can't INSERT blob into specific blob space using JDBC
I tried an example with 3.00.JC3 and it works fine without having a default SBSPACENAME in the onconfig file. VG.…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: Validating the 'SBSPACENAME' sblobspace
"Is a command-line call significantly different from file system access?" Well for SQL yes. In sysmaster.sysconfig there is a cf_effective column. This is the value in use by the database server NOW, this does not have to match the ONCONFIG value. You can change the onconfig …
listener-thread: err = -25546: oserr = 0: errstr = : Invalid ASF assoc_id
Hello I'm new to Informix and I'm having a problem with Informix 9.4 on a laptop with Windows XP. I get the following error in the log file: 12:32:08 listener-thread: err = -25546: oserr = 0: errstr = : Invalid ASF assoc_id. The database server was working just after I installe…
Re: Assert Fail - onmode hangs
When it hangs the threads are still doing something. I wanted to see what they were doing. They can't all get stuck in cond_waits? Anything waiting on something unusual? I couldn't be specific but I could probably tell you from the stack traces what is going on. Any new process…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
v 9 stopping
search for a dir called informix (assume you installed it there) in there you should have a subdir called etc in there you should find a file called onconfig.<informixserver> search for MSGPATH which has the name of your logfile Superboer.…
Re: IDS 10 erratic run times
1. Try running onmode -F before each run (free shared memory segments/blocks and general tidy up memory structures). 2. What does onstat -g stk <thread id> give for the sqlexec (or sessions threads) and the kaio threads during the freeze? Repeat several times to see what func…
Redirected restore failure
>From the backup and restore manual renaming chunks duing a restore..key considerations... "During a cold restore, ontape performs the following validations to rename chunks: 3. If renaming the primary root or mirror root chunk, it updates the ONCONFIG file parameters ROOTPATH…
hyperthreading and onconfig parameters
We are upgrading our database servers to HP ProLiant DL380 G4 two-way systems. This platform supports enabling or disabling "hyperthreading". (See, for example, http://sysadminforum.com/t36970.html.) With hyperthreading enabled, the OS (Solaris 9, x86) sees 2 logical processors …
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: stack overflow locking sysprocplan
jda wrote: > I'm beginning to believe that the stacksize is a red herring, too. > > > We have 5 tables involved: > id_rec - id and default name and address > aa_rec - alternative addresses (summer, work, home, campus, > solicitation , etc.) > addree_rec - altern…
stack overflow locking sysprocplan
jda wrote: > We are experiencing the following problem and have yet to resolve it > completely even after an IBM support call. When users run reports in > Cognos's Impromptu that use views with stored procedures calls with > them, the user will lock sysprocplan and prevent other…
RE: recording ONCONFIG changes
Tripwire or AIDE would do the trick too. -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Jonathan Leffler Sent: Thursday, July 07, 2005 2:16 AM To: informix-list@iiug.org Subject: Re: recording ONCONFIG changes mw…
Re: recording ONCONFIG changes
mweallans@panacea.co.uk wrote: > Scanning the old messages I came across a "suspicion" from Neil Truby > that IDS 9.2 was't recording all changes to ONCONFIG in the message > log. > I've recently spent many days trying to find why a problem had recurred > and eventually I discove…
recording ONCONFIG changes
Scanning the old messages I came across a "suspicion" from Neil Truby that IDS 9.2 was't recording all changes to ONCONFIG in the message log. I've recently spent many days trying to find why a problem had recurred and eventually I discovered that it was because a previous change…
Re: ONCONFIG - comments
Juan Pablo wrote: My comments below: > Hi: > Let me begin by saying thanks to all of the frequent posters to this group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiem…
Re: ONCONFIG - comments
"Juan Pablo" <in4mixperu@hotmail.com> wrote in message news:1120173312.07d6de6c2486de67e3cad47cd40e6341@teranews... > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ====================…
Re: ONCONFIG - comments
Juan Pablo said: > > Hi: > Let me begin by saying thanks to all of the frequent posters to this > group. > I wanted to offer my config for comments. > thanks > ============================================================ > Hola: > Muchas gracias por el tiempo y su ayuda. Est…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pode…
ONCONFIG - comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
RE: Informix IDS 9.4 failed to initialized shared memory
Hi Chivi. Make sure your release notes in your $INFORMIXDIR/release/. If you config kernel parameter, the post the folliowing. oninit -v -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: "Chivi" <egmondragonm@yahoo.com> >Reply-To: "Chivi" <egmondragonm@yahoo.com> >T…
Informix IDS 9.4 failed to initialized shared memory
Chivi wrote: > I just installed Informix IDS 9.4 on Mandrake 10.1 Kernel 2.6.x > > I setup the onconfig file. the following are some of the parameters I > set: > # Root Dbspace Configuration > > ROOTNAME rootdbs1 # Root dbspace name > ROOTPATH /home/informix/…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG para pod…
ONCONFIG comments
Hi: Let me begin by saying thanks to all of the frequent posters to this group. I wanted to offer my config for comments. thanks ============================================================ Hola: Muchas gracias por el tiempo y su ayuda. Estoy dejando mi archivo ONCONFIG par…
RE: New installation
Yes I agree with Brian, you put something in the onconfig that required 161MB but you have defined the root dbs size 60MB that is not enought to cover all the requests. Check the PHYSFILE, LOGFILES LOGSIZE in the ONCONFIG file. If you need more help give us the full ONCONFIG. b…
Help with ONCONFIG needed
Having a problem with a client connection to an informix database. The server has two databases, db1 and db2. Each database has a separate ONCONFIG file which lists the different db names in them. ONCONFIG_db1 includes db1,but not db2 in the DBSERVERNAME/DBSERVERALIAS …
Need help!! Sql to Informix Migration
Not a lot of buffers for starters, this looks like an 'out-of-box' config, grab the performance guide, have a quick read and the use pf most the parameters will 'as if by magic' become clearer [cutting] > > SERVERNUM 1 # Unique id corresponding to a server > …
Segmentation Violation error
Following is the error file created today. The database had to be taken down by force (kill oninit processes and clear up shared memory). First of all let me tell you that we are running in the stone age. VERY old version on outdated platform. Our management has no intention o…
Segmentation Violation error
Following is the error file created today. The database had to be taken down by force (kill oninit processes and clear up shared memory). First of all let me tell you that we are running in the stone age. VERY old version on outdated platform. Our management has no intention o…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
The onconfig FILLFACTOR
My day for asking questions ... but that is how one gains knowledge :) The lead DBA for the company for which I am now working for as a consultant wants to establish an initial FILLFACTOR of 100 for those indices that represent a serial column. Since none of the tables having a…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
DB comes down w/ BUFFERS > 350000 ... UR down to 95%
Hello, This looks like bug 161674 "LINUX 32-BIT SERVER SILENTLY DIES DURING INITIALIZATION IF 'BUFFERS' ARE 260000 OR MORE. MAY BE RELATED TO '__PAGE_OFFSET' IN LINUX KERNEL" Fixed in 7.31.UD7. Regards Guy Anthony Presley wrote: > Hello all, > > Our DB has noticeably gotten s…
STACKSIZE.
Hello, I recently resolved an issue with STACKSIZE on one of our test databases by using the following thread: http://groups.google.com/groups?q=yield_processor:+Stack+overflow&hl=en&lr=&selm=7qnkgs%24nq1%241%40nnrp1.deja.com&rnum=2 Thanks to those that contributed to this and…
assert failed
9.21.UC4??? This is unsupported. maybe thats why you are posting on here instead of calling support? You haven;t posted the af file, /tmp/af.42896fba, only the online log. Can you post the stack from the failling thread? and maybe the sql from the failing thread too? tbrumley…
RE: Error -9791 when execute routine (procedure) - pls asap.....
Hi All, Deep appreaciated for your kind response, I'll try to increase STACKSIZE as recommended on this post to me. Beside that, you're right, this IDS running on AIX 5.3, instead of AIX 4.3 Will you know the result once i have change stacksize. Kind regards..! "Simmons, Keith…
Error -9791 when execute routine (procedure) - pls asap.....
"abdoell" <abdoell@yahoo.com> wrote in message news:e05e140c.0410062234.5e3d27b5@posting.google.com... > Current Environment: > IDS9.40.FC4, O/S: AIX4.3 > > Dear folks > > I got a problem, When SPL(Stored Procedure Language) program is > performed from 4gl or PowerBuilder program…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Informix Tuning Problem
Andy Leung wrote: > My server run very slow for this few weeks.. I've checked the %cache go 99%.. > > Hardware : > IBM - H80 , 4 CPU , 2G Ram , HD x 2 > > dskreads pagreads bufreads %cached dskwrits pagwrits bufwrits %cached > 25899 119543 30538756 99.92 97670 146260 …
Re: Informix Tuning Problem
UPDATE STATISTICS? Andy Leung said: > My server run very slow for this few weeks.. I've checked the %cache go > 99%.. > > Hardware : > IBM - H80 , 4 CPU , 2G Ram , HD x 2 > > dskreads pagreads bufreads %cached dskwrits pagwrits bufwrits %cached > 25899 119543 30538756 99.92…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
RE: parametros ONCONFIG
Los parametros del ONCONFIG que tienes que setear para inicializar tu instancia como MINIMO son: ROOTPATH Path completo del chunk creado para almacenar el root Dbspace ROOTSIZE Tama�o del chunk en Kbytes (Ejemplo: 2048000 # 2Gb) DBSERVERNAME Nombre l�gico del server.(Eje…
parametros ONCONFIG
Me podrian ayudar con los parametros del ONCONFIG. No las tengo muy clara cada parametro, por lo que la misma me trae problemas para el momento que quiero OPTIMIZAR el servidor de bases de datos. Si alguien me puede ayudar a conocer mejor cada uno de estos parametros .... les agr…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
onconfig for analisis
Hi, I post the onconfig file for its analisis: Operating System: SuSE 9.0 RAM: 1024 Mb Informix version: 9.40 UC2 All chunks are raw devices. Thanks. #************************************************************************** # # INFORMIX SOFTWARE, INC. # # Title: onconfig…
ONCONFIG for 9.40 offered for comment
9.40 FC3W2 on HP-UX 11.11 The server has 6 cpus and 6G of RAM. 3 other, small, IDS 9.40 instances run on the server, and one small 7.31. kaio is enabled. Just put 9.40 live, and it's running about 5-10% more slowly on some key processes. This reflects what happened in testing. …
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ > 2Gb ram and 4 processors that seems very slow on a large sequential > write (I suppose that the problem resides in the dbspaces on > filesystem...). Any suggestion? The following is my standard…
RE: Replication problems
Don't know if this will help, but try changing the STACKSIZE in your onconfig from 64 to 128 ...... -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Harry Johnson Sent: Tuesday, June 15, 2004 1:10 AM To: informix…
Replication problems
"Harry Johnson" <hjohnson@keeneinfo.com> wrote in message news:6830f442.0406141510.45f4d2b7@posting.google.com... > I am trying to use Enterprise Replication on 2 HP servers. It seemed to work fine > for a few hours. It came down and when I bring Informix up I get the following…
Re: OnConfig parameters tuning
"Laverio" <laverioNO@z-1000.net> wrote in message news:cac7sg$e8v$1@newsreader.mailgate.org... > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in…
Re: OnConfig parameters tuning
Laverio wrote: > Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram > and 4 processors that seems very slow on a large sequential write (I suppose > that the problem resides in the dbspaces on filesystem...). Any suggestion? > > My onconfig it's set as fol…
OnConfig parameters tuning
Hi guys, I'm trying to speed up an IDS 9.30 on a Sun 7.5 system w/ 2Gb ram and 4 processors that seems very slow on a large sequential write (I suppose that the problem resides in the dbspaces on filesystem...). Any suggestion? My onconfig it's set as follow: # System Configura…
Howto for Onconfig
Hi everyone, This is probably a question which has been asked often. But I could not find proper documentation on how to calculate and set correct parameters for Onconfig. I understand this is a complex question. But are there any articles on this ? Maybe they covered the topic …
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Re: Performance advice
Mis-posted! Meant to start a new thread! emebohw@netscape.net (sumGirl) wrote in message news:<a5e13cff.0404190558.7da91e40@posting.google.com>... > Hi all! Throwing myslef on your mercy here - I have a RS6000 with 4 > processors running IDS 9.40.FC2 and I just went from 1 gig o…
RE: Performance advice
I agree, you get the biggest bang for your buck out of increasing your BUFFERS. At the same time, if your checkpoint durations increase you will have to tune LRUs and possibly CLEANERS. Bill > -----Original Message----- > From: Neil Truby [SMTP:neil.truby@ardenta.com] > Sent: …
Re: Performance advice
No change you ever make will have one fiftieth of the impact of adding more BUFFERS. So add away, start with increasing it to, say 750000. Use onstat -g seg to ensure that you have no added shared memory virtual segments, and increase SHMVIRTSIZE if you do. "sumGirl" <emebohw@n…
Performance advice
Try increasing the buffers and monitoring onstat -p, if you are allocating additional segments (onstat -g seg) then up your shmvirtsize. AIX has (had??) a hard limit of 10 segments for any process sumGirl wrote: > > Hi all! Throwing myslef on your mercy here - I have a RS6000 wi…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
SHARED MEMORY LIMIT
Is posible to use with informix of 32 bits more than 2GB of shared memory in a Linux Machine? The base address in onconfig is: SHMBASE 0x41000000 Thanks in advance,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Assert Failed: Memory free block header corruption detected
I am getting the following message in the message log which is bringing down my system.This has happened thrice within 20 hrs. 07:24:01 Assert Failed: Memory block header corruption detected in mt_shm_mallo c_segid 2 07:24:01 Informix Dynamic Server Version 7.31.UC5 07:24:01 …
no more cursors remaining
Check the number of cursors you have open. I cannot stress this enough. The reason for the vague answer by Informix for how many you can have open is because it is depended on the size of hardware given to the database server. I would bet if you look at your servers configuratio…
Re: dbimport - memory fault
The STACKSIZE parameter value is 64 (default value). I will try to increase this value in my next maintanance in the database. Tks, Regards, Eduardo "Andrew Hamm" <ahamm@mail.com> wrote in message news:<bssukk$13uqo$1@ID-79573.news.uni-berlin.de>... > Eduardo wrote: > > > > I…
Re: dbimport - memory fault
Eduardo wrote: > > I have a HP-UX 11.11 with informix 7.31 FD4-W6 - 64 bits. When I try > to do a dbimport command "(dbimport <database> -d datadbs1)" I recive > the following error message: "memory fault - core dump". This error > occours when dbimport start to import the Stored…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
Unexpected virtual processor termination
Please help me for resolution of an Informix Error : 17:06:14 mt.c, line 10188, thread 9, proc id 8335, Unexpected virtual processor termination, pid = 8336, exit = 0x9 . 17:06:14 Assert Failed: Unexpected virtual processor termination, pid = 8336, exit = 0x9 17:06:14 Who: Sess…
wait statistics - meaning of mt yield
If wait statistics is off the onstat -g ath output knows a state "sleeping forever". Threads enter it if they wait for something to happen in some other thread. The other thread is responsible to wake them up then. This state is used for many different things. Among them are wait…
Changing database local / dbexport tapesize
Hi, Did you change TAPESIZE on your onconfig file? That could be the restriction! REGARDS…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
RE: 9.40 buggy!
Rich Campbell wrote > > We have experienced many problems while testing 9.40 for a > mission critical > application. We can not execute our > load test without crashing the engine. We will be pulling > back to 7.31. > Very disappointed in the Quality Control of 9.40 since > IBM…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: Debian Linux
Jack wrote: > Andreas Breitfeld <abreitfe@de.ibm.com> wrote in message > news:<blbgln$13do$1@gazette.almaden.ibm.com>... >> Cindy Lichtenauer wrote: >> >> > Anyone have any successful experience with Informix on Debian Linux? >> > >> > Will IDS 9.4 run on it? >> >> Yes, but for …
Re: onconfig and sqlhosts
Hi Thomas. Administrator's Guide for Informix Dynamic Server, Version 7.3 http://www-3.ibm.com/software/data/informix/pubs/library/ids_73.html HTH. -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: Thomas Ronayne <trona@ameritech.net> >Reply-To: Thomas Ronayne <trona…
onconfig and sqlhosts
I've managed to blow away my installed Informix system and cannot for the life of me find the notes I had about onconfig and sqlhosts. It's version 7.30.UC5 running on Slackware 9.0 -- can someone point me at the right document in Answers for the appropriate settings? Thanks.…
Re: 7.x to 9.x Performance issue in the extreme
Have you tried running the query against both servers with "set explain on". -- Jeff jlar310 at yahoo "Tom Lowrie" <tlowrie@munis.com> wrote in message news:e91c92f1.0310020736.6b8acebe@posting.google.com... > Greetings, > > The problem: I run an identical program on Server A an…
RE: 7.x to 9.x Performance issue in the extreme
Try running onstat -g ses SESSION_ID for the session that is taking so long. Assuming you are correct about the hardware resources being adequate, I'd look for this session or the application process that started the session to be waiting on some condition. Maybe a lock or some …
Re: 7.x to 9.x Performance issue in the extreme
Tom Lowrie wrote: > Greetings, > > The problem: I run an identical program on Server A and Server B. On > Server A the program runs in 12 seconds. On Server B it takes 1.5 > hours. > > Server A: IBM RS/6000 H80, AIX 4.3.3.0.11, IBM IDS 7.31.UC7 > > Server B: IBM RS/6000 S80, AIX…
Re: Onconfig file parameters
Sometimes even the ontape parameters (TAPEDEV, LTAPEDEV, TAPESIZE, etc.) are not dynamic. What you can do is change a parameter in the onconfig file and then dump out the reserve page that holds the onconfig parameters with: oncheck -pP 1 1 Hope this suggestion helps. Brice Av…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Re: Informix 9.4 crash
Bill and all, This is really a bad stack trace. But if somebody has a dbx debugger installed and can reproduce the problem: Configure online with one cpu vp and then as root run: dbx $INFORMIXDIR/bin/oninit (dbx) run -d where # run this after dbx reported a crash I hope …
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
Re: Stored Procedure Performance
Joe, If you can do the following to obtain a stack trace of the server thread I might be able to tell you more: Use onstat -g ath to look at the state of the thread (Repeat it a couple of times to get an impression of any changes in state). If the state is running and you are …
RE: HPL Unloading error [1467]
Here's my onconfig file SHMVIRTSIZE 147456 SHMADD 8192 SHMTOTAL 0…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
onconfig file
The system administrator at my current site thought he would be very clever and he linked the onconfig files to different directories using ln -s. We have now discovered that these links are being lost when we use onmonitor and replaced by a local file, but not when we use vi. I…
Re: Err 243
> Dear, > I found an err code 243 in my online.log, CPU loading at that time was > around 90%+. does anyone know what the problem is??? and solution??? > here is my config. > > LOCKS 200000 > #BUFFERS 1536000 > BUFFERS 1126400 > NUMAIOVPS 2 > …
no checkpoint
Yes, I am using 64 bit Informix, The max LRU can be 512. So the only drawback from long checkpoint interval is longer recovery?? that's it??? "Franklin Tang" <franklin@macauslot.com> ���g��l��s�D :badmbv$eqo1@ctmsun0.macau.ctm.net... > Dear All, > I just want to know if I…
Re: No thread isolation-- Unusual or Common?
Thank you. STACKSIZE is already configured to 64K. That is the configuration that failed. DG "Samar Desai" <samarof74@yahoo.com> wrote in message news:b9k9ms$tte$1@terabinaries.xmission.com... > > John, > > You may need to increase STACKSIZE parameter in > ONCONFIG file and b…
Re: No thread isolation-- Unusual or Common?
John, You may need to increase STACKSIZE parameter in ONCONFIG file and bounce the engine. Standard value is 32K. Try using 64K stacksize. HTH Regards Samar --- John Carlson <john_carlson@whsmithusa.com> wrote: > On Tue, 6 May 2003 08:21:36 -0800, "David E. Grove" > <david_gro…
Re: No thread isolation-- Unusual or Common?
John, You may need to increase STACKSIZE parameter in ONCONFIG file and bounce the engine. Standard value is 32K. Try using 64K stacksize. HTH Regards Samar --- John Carlson <john_carlson@whsmithusa.com> wrote: > On Tue, 6 May 2003 08:21:36 -0800, "David E. Grove" > <david_gro…
Increased stored procedures
I think you should be OK now. I also had to increase STACKSIZE as well for large SQL Queries; up to 192. This also eliminated our AF's. Try upping this if you start getting AF's. Is there a reason not to move to 9.4, there are some great features in this release? Carl W Berner …
Re: Assert Failed.
Hi, I am using IDS Version9.21.UC4 running in Sun E450. Recently, the informix database ususally down with following messages in online.log: 18:47:57 Assert Failed: No Exception Handler 18:47:57 Who: Session(41327, informix@server_1a, 14926, 705960568) Thread(41358, sqlexec, …
Re: Antw: IDS: IDS 7.31 to 9.30 migration, incl. HPUX10.20 to 11i
Andreas suggested: >I suppose you change the hardware, too - at least the machine? In that case I would >suggest to install both IDS versions on the new machine (7.31.UC runson 11i without >problems) and start the server on the new machine/OS just to check everything >is correct…
IDS 7.31 to 9.30 migration, incl. HPUX10.20 to 11i
----LNX_Tue_Apr_15_2003_09:41:29_V3.33-- Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable >Datum: 2003.04.14 16:20:02 >Sender: Malc_p <malc_p@btinternet.com> > >Bit of a leap here, we're just gearing up for this upgrade. >The migration g…
RE: Onmode -F . . . oops!
Here's the start: 13:21:54 13:21:54 Informix Dynamic Server Version 7.30.UC7 Software Serial Number AAC# J587572 13:21:54 Assert Failed: No Exception Handler 13:21:54 Who: Session(3010, vrd_07@victory, 4799, 0) Thread(3319, sqlexec, 0, 1) File: mtex.…
what can i do about a thread that is "sleeping forever"
We place a thread in a 'sleeping forever' when we are waiting for some other thread to activate the thread. Normally this is the result of a locked resource. So if the thread is seeing a lot of "sleeping forever" states, it is most probable that the thread is running with lock …
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
IDS 7.31.Txx Windows NT Alaramprogram
i have change the path in the onconfig-file and restart the server but the alarmprogram will not be start if a event (logs) a generated! thomas…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Re: IDS 9.20 panic
No registered datablades. We aren't really using any extended functionality of IDS 9.20. The engine is just being used to support, principally, a bought-in Financials package written in COBOL with an Informix interface, and some 4GL/VisualBasic applications. As mentioned previ…
RE: IDS 9.20 panic
You might want to increase your STACKSIZE config parameter to something like 128. Are you calling functions/procedures recursively? Don -----Original Message----- From: Neil Truby [mailto:ntruby@netcomuk.co.uk] Sent: Monday, October 16, 2000 2:05 PM To: informix-list@iiug.org …
IDS 9.20 panic
IDS 9.20 FC2 on HP-UX 11.0 Has anyone come a similar error to the one below? I've had it twice now, once on a production instance and once on a test. Tech Support aren't coming up with much. I wonder whether to escalate it: thanks Neil 11:08:45 Checkpoint loguniq 43086, lo…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
Re: ONCONFIG History
put it under source code control? SCCS and RCS are free tools and dont take too much resources. HTH Sujit testNews <mtabunda@amellar.com> on 10/04/2000 09:05:30 PM Please respond to testNews <mtabunda@amellar.com> To: informix-list@iiug.org cc: Subject: ONCONFIG History I…
RE: ONCONFIG History
Look at your online message log onstat -c |grep MSG -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Wednesday, October 04, 2000 9:06 PM To: informix-list@iiug.org Subject: ONCONFIG History Is there a way to know/track the changes made to ONCONFIG …
RE: ONCONFIG History
Changes are recorded in the message log at startup. Wayne E. Martin Informix Database Administrator Kmart Corp. -----Original Message----- From: testNews [mailto:mtabunda@amellar.com] Sent: Thursday, October 05, 2000 12:06 AM To: informix-list@iiug.org Subject: ONCONFIG History…
ONCONFIG History
Is there a way to know/track the changes made to ONCONFIG files?…
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
HHHHEEEELLLLPPPP!!!! My servers have gone nuts!
What are the stack traces from the af files? Just function names from the atcive thread will do.. Also check UNIX kernel logs (Look in /etc/syslog.conf for names of logfiles). David.…
TBLSPACE_STATS
Hi, what is the meaning of TBLSPACE_STATS variable in onconfig file? thank in advance.…
RE: IDS 9.20 with a single cpu vp
Wont pstack <pid> give what you want?? > > I guess a little more explaination is in order.... > > The only way that you can create a stack trace is via the > return address from a > call function. This may or may not yet be in the physical > stack memory. For > instance, with …
IDS 9.20 with a single cpu vp
I guess a little more explaination is in order.... The only way that you can create a stack trace is via the return address from a call function. This may or may not yet be in the physical stack memory. For instance, with Solaris, there is a so called circular register stack w…
Query Optimization: Wrong execution plan?
Xavi Tarafa Mercader wrote: > Any suggestion about how to improve the query performance? Set OPTCOMPIND parameter ( in onconfig file ) to 0. > Xavi. Leonid.…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
WSTATS and Performance
Hi, does anybody know the performance degradation by setting WSTATS 1 in the onconfig file? Is this 1%, 5% or 10% ??? TIA Ruediger Papke…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Informix spawning threads every 5 seconds
In article <8id17o$8o$1@oak.fernuni-hagen.de>, Johnson <johnson@kudzu.fernuni-hagen.de> writes >We have Informix 7.23 UC3 running under AIX 4.2.1. Aio has been activated. >Using vmstat, I have observed that the number of runnable kernel threads jumps >from 0-1 to 19-21 every 5 se…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Using IDS with a WebObjects 4.5 app
Hi group, I'm in process to switch from SQL*Server to Informix IDS 9.20 (on NT and Solaris 7). I always got a -1811 error with all my applications as well as with demo applications. Has any WebObjects/Informix developer worked this around ? Thanks in advance Gilles Lenfant glt…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
tlitcppoll thread assert failures
Set the ONCONFIG file to save a core dump. If it happens again load the core file into a debugger and get a stack trace from the debugger to send to Informix. I had to do that for years as the DGUX releases do not do the stack trace thing ever. BTW the first trace says it's fr…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
Re: Memory problems? Please help.
>>What is the connection type? shm or soc ? >> >What are these? See NETTYPE in your onconfig file. HTH Michael…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
Re: Shared Memory Parameters?
Calvin Shoults wrote: > > I am working with an existing database that has some onconfig parameters > that I am questioning. > > One of our problems is extents, but another reason we get hammered during > the day might be the following shm parameters. What's wrong with the extent…
Re: Shared Memory Parameters?
You have only 21 chunks. In this situation may I know the reason for 56 NUMAIOVPS. Is it not possible to use KAIO ? Alkesh Vipani. ----- Original Message ----- From: "COOPER, Joseph" <Joseph.COOPER@sema.co.uk> To: "'Calvin Shoults'" <jcsatlcom.net@mindspring.com>; <informix-list@…
RE: Shared Memory Parameters?
> I am working with an existing database that has some onconfig > parameters > that I am questioning. > > One of our problems is extents, but another reason we get > hammered during > the day might be the following shm parameters. > > OL Engine Vers. 7.31 on HP 9000 > Aprx. 400-6…
Re: Shared Memory Parameters?
From: "Calvin Shoults" <jcsatlcom.net@mindspring.com> > >I am working with an existing database that has some onconfig parameters >that I am questioning. > >One of our problems is extents, but another reason we get hammered during >the day might be the following shm parameters. >…
Shared Memory Parameters?
I am working with an existing database that has some onconfig parameters that I am questioning. One of our problems is extents, but another reason we get hammered during the day might be the following shm parameters. OL Engine Vers. 7.31 on HP 9000 Aprx. 400-600 users Database …
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
-1319 Error on SunOS 5.6
Hello, I've run into a problem porting from AIX to SunOS 5.6. One of our binaries bombs out with the following message: FORMS statement error number -1319. The 4GL program has run out of runtime data space memory. The program is relatively small, and other larger programs can…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
RE: Long spins or onstst -g spi. Need any information.
Eugene Nechayev <4new@my-deja.com> wrote in message news:80bvko$so0$1@nnrp1.deja.com... > Art and William thanks for your responses > > Now it's more clear, and after Art's explaining line by line > my onstat -g spi output it's more understandable and useful for me > than after r…
Re: Dumb question
Sorry all, I think I found the answer to my own dumb question in the documentation (last place I would have thought to look). "The database server uses the ONCONFIG file during initialization" >Is it safe to edit my onconfig file when the database is live ? > >Or should I stop…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Lock Table Overflow - onconfig
We get an error in the Informix log-file. Lock table overflow. What do we have to change in the onconfig-file ? Kind Regards, Franky Thiel franky.thiel@Infohos.be…
Setting up shared memory connection
Did you add the DBSERVERALIASES line in the onconfig file? -- James Edmiston Quest Information Systems, Inc. www.questisinc.com…
Version 7.31 FC2 on HP_UX 11.0
In article <JTcB3.84$xa4.1135@news.colt.net>, "Bashar" <bashar@ctl.com> wrote: > Stupid question, maybe, but have you tried increasing the stack size? > > -- > Bashar Chalabi > CTL, London > Actually a very good question. I have just in the last several days increased the STAC…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
Re: ontape in HP-UX
You need verify the sintax of onconfig file for this entries: TAPEDEV /dev/rmt/0m # Tape device path TAPEBLK 512 # Tape block size (Kbytes) TAPESIZE 7800000 # Maximum amount of data to put on tape (Kbytes) (This is my onconfig fil…
RE: IDS 7.31 UC2 crash and burn
I am also running Informix on an HP 9000 with HP-UX10.20 and my suggestion is this: Make a list of all the patches recommended by Informix (look into your INFORMIXDIR/3/release/en_us/0333/*) grep PH >/tmp/pepe and edit clean the result. Send it to your HP technical support rep. w…
IDS 7.31 UC2 crash and burn
It happened again.... This goes to (Informix) support -but maybe someone here have seen this before. HP-UX 10.20 on a K380, patches and kernel-settings pr. release-notes. Thomas Latest crash: 23:22:20 Logical Log 2 - Backup Completed 23:51:27 Assert Failed: No Exception Hand…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Assert Failed: Internal Error.
Hi, folks I have an application made with Informix 4GL. The last days we have had some errors when a Select is executed. This Select use two tables. The second table is used only for where clause. It happend only sometimes, not ever. The versions we have are: NCR MP-RAS Infor…
Re: error 25588
Dieter Powroznik wrote: > Hi! > > >From time to time our Informix-Dynamic-Server produced the > following error: > > -25588 The appl process cannot connect to the database server server-name. > An error in the application can produce this message. Check your > CONNECT statement …
Re: error 25588
I think you should also check your NETTYPE settings in server configuration. Best Regards, Octav On Tue, Aug 17, 1999 at 12:51:59PM +0200, Dieter Powroznik wrote: > Hi! > > From time to time our Informix-Dynamic-Server produced the > following error: > > -25588 The appl process…
"Funny" crash on 7.31
We've had two of them this week, both under relativly high load (generating indexes or running update statistics on large tables). I've mailed these (and the stack trace) to Informix, but decided to ask here just in case someone had "been there, done that": (Informix Dynamic Se…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Re: shared memory error SCO install
Brian, You didn't specify what version of the engine/OS you are running. But you should change your SHMBASE to 0x82000000 aand SHMVIRTSIZE to 8192. Then check your release notes. With SCO you may have to install a patch or make changes to your kernel. HTH Joe ------------------…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Re: Informix 7.3 UC5 on RH Linux 5.2
Additional INFO: Please see attached "sqlhosts" and ONCONFIG files...…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
OnLine Problem
HI All, We experience sudden crash of our Informix Instances. We run several instances at the same time. One C program access a number of them making one of them crash randomly. The log generated shows a Internal Bus Error problem forcing Online to shutdown. Here is an extract …
Re: onconfig parameters
> onstat -c shows you the contents of the ONCONFIG file, but then so does vi > $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? Does onstat -c reflect changes made by onmode commands? I should try that and see...that, to me, would be the compelling reason …
Re: onconfig parameters
Thomas onstat -c shows you the contents of the ONCONFIG file, but then so does vi $INFORMIXDIR/etc/$ONCONFIG. Perhaps I did not understand the question? HTH Sujit "Thomas G. Smith" <tsmith@wdn.com> on 04/28/99 12:19:10 PM Please respond to "Thomas G. Smith" <tsmith@wdn.com> …
onconfig parameters
Is there a command to force the engine to show me what all the onconfig parameters (and other perhaps unknown parameters) have been set to?…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Re[2]: Checkpoints taking to long!! cont.
Bridgette: Sorry it's early here, a phys log that's too small would account for checkpoints happening to frequently (based on the chkptintvl in the onconfig) not for the duration... I should go back to bed! Kevin ______________________________ Reply…
Re[2]: Checkpoints taking to long!!
Bridgette: Your physical log file may be too small. If it's in it's own dbspace you could check with onstat -d. Otherwise I can't think of another way at the moment (maybe the group has some ideas) Kevin ______________________________ Reply Separator ___…
Re: Checkpoints taking to long!!
>Hi > >I've run into a problem with the checkpoints on my production system - >they used to be all around 0 seconds long with the occasional 3 second >checkpoint - now they have increased to more like 10-15 seconds average >with a top of 20 seconds. We are running 730UC5 on a Se…
Checkpoints taking to long!!
What's triggering your checkpoints? Are they occurring at the interval, i.e. every five minutes, or more frequently? If they're every five minutes, try a more dramatic reduction of max and min dirty, say 10 and 5. Neil bridget wrote in message <36F82B39.C6D6833E@auckland.ac.n…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
onconfig tuning
Hi all! I have posted to the web my collection of notes on onconfig parameters. It is not yet complete but pretty far along. http://home.earthlink.net/~mildness/bamph/informix.htm It has helped me over the years to have this list in my PDA. If you think it useful feel free…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
Back to: Segmentation Violation
I saw the "Segmentation Violation" threads from earlier but what few /tmp/af.* files were posted didn't look like mine, so here goes: >17:29:13 >17:29:13 Assert Failed: Internal Error - Segmentation Violation >17:29:13 Who: Session(34, nobody@GONZO, 18300, 806729156) > …
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Regarding calling an INFORMIX procedure from a UNIX shell script
I use dbaccess for this purpose. Syntax is "dbaccess <database> <text file with sql commands>. Just be sure your informix environment variables are set properly (INFORMIXSERVER, ONCONFIG).…
thread safe version of informix 4gl
William Lau wrote: > > Does anyone know if there exists a thread safe version of informix 4gl. Because of its stack execution model I doubt that 4GL could be made thread safe. Perhaps if each thread had its own execution/data stack but I doubt that even that would be enough. A…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
informix internal error - Segmentation Violation
Hello, I'm using Informix Online DSA version 7.24 UC3 on AIX 4.2.1, our online.log contains the following messages : 19:20:29 Assert Failed: Internal Error - Segmentation Violation 19:20:29 Who: Session(1737, apdsp@hddbr6, 43904, 1074128940) Thread(2373, sql…
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Re: IECC Server Discovery Failed 2nd
Hi Dale, sorry for not reading your article correctly: Are both agents running admagent and osagent ? If so, when you run stopsa, do both stop? If not, kill them and run startsa again. Is your onconfig still up to date? The agents seem to take all information from onconfig ra…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Updating databases
What must be done,eg onconfig, to get the fastest result on updating a database alter tables, inserts etc.…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
ONCONFIG on UNIX
What kind of use if the parameter "SYSALARMPROGRAM" for. And which input parameters are used. Thanks for mailing to baumschlager@pfeiffer.co.at…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Problem with cooked dbspace
Hi All, A file space used as a dbspace is removed by unix admin. We shutdown and start the informix server and got the following messge "dbspace xyz not found " We realised that we removed the cooked space at that time. We restored those files from the daily file system backup. A…
sizes in onconfig
OWS 7.2 on SCO UNIX: Does anybody know why all sizes of dbspaces or logs, etc. are just half as big as they are in the onconfig file. If I check the size of a dbspace, for example, its file size is 2 GByte, but oncheck -pe says it's 1 GByte. Thanks in advance, Pascal…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
Re: Doubt regarding L.Log size
Sadagopan, Sathish wrote: > > Hi, > LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows > > a figure of 5000 , Page size is 2K. > How can that be ? It looks like someone used onparams to add logfiles with sizes different from that stored in the onconfig.…
Doubt regarding L.Log size
Hi, LOGSIZE in the onconfig is shown as 1000 Kb, whereas size in onstat -l shows a figure of 5000 , Page size is 2K. How can that be ? TIA Sathish…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
Re: limiting oninits?
>Is there a way to limit the number of oninit processes that get spawned? > >I'm using 7.20.UC4 for Solaris. They each eat up about 15 megs, and several >of them dont get used at all. > > The number of oninits is basically the number of CPUVPs, AIOVPs, NETVPs, plus 2. If you wa…
My weird problems
Thanks to all who replied. The Logical Log problem was with memory parameters in the onconfig file. DBSPACETEMP problem still exists however Regards Lee Robertson…
Re: System Crash
In article <6frkn4$6o5$1@news.xmission.com>, Gabriel Weisz <gweisz@SMTPL INK.PUROLATOR.COM> writes > > We are running a 7.23 system and today morning we got the following > message : mmt.c line 2447 , thread 1255 , proc id 1044 , > yield_processor : Stack overflow in …
System Crash
We are running a 7.23 system and today morning we got the following message : mmt.c line 2447 , thread 1255 , proc id 1044 , yield_processor : Stack overflow in thread 1255. message. The system is up but no one can connect we can't shut the system down or…
Re: Posting from the Informix-list
In article <6fghk1$oa1$1@news.xmission.com>, Gabriel Weisz <gweisz@SMTPL INK.PUROLATOR.COM> writes > > Hi: > > We are running a 7.23 system and today morning the we got > > mmt.c line 2447 , thread 1255 , proc id 1044 ,yield_processor : Stack > overflow in thread …
Onconfig Question
I sent this a few weeks ago and didn't get any responses. I am rephrasing the heading and trying again. We are not currently having any performance problems, but I am interested in hearing some opinions from the experts out here. One of our systems is as follows: Sun SPARCcen…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: create trigger crashes online
In article <34900766.7A25@dvs1.informatik.th-darmstadt.de>, Christoph Liebig <chris@dvs1.informatik.th-darmstadt.de> writes >David Williams wrote: > > In article <348E8C64.229A@dvs1.informatik.th-darmstadt.de>, Christoph > Liebig <chris@dvs1.informatik.th-darmstadt.de> writes > >…
Re: create trigger crashes online
David Williams wrote: In article <348E8C64.229A@dvs1.informatik.th-darmstadt.de>, Christoph Liebig <chris@dvs1.informatik.th-darmstadt.de> writes >Hi ! > >We are using online 7.23.UC2 in a database course (lab). >Some students manage to crash nformix by issuing the followi…
Re: Freeing Logical Log with Status U
What's LOGFILES set to in your onconfig file? Try forcing a checkpoint? Jon.…
Re: Online Crash
Try debugging the shmem.* file to see what the user was doing. Use onstat -i shmem.*, and use the onstat commands without the "onstat" and the "-". I had a similar problem on 7.13 and narrowed it down to a varchar value being accessed as an integer. funny but …
Online Crash
Hi I am running INFORMIX ONLINE 7.23 UC1 on SGI Challenge IRIX 6.2 When server crashes I got messages ------------------------------------------------ af.dcd4aa5 09:17:57 09:17:57 Assert Failed: Internal Error - Segmentation Violation 09:17:5…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Online is RAM-Hungry
In article <33A5F357.3B27@echonyc.com>, Cosmo Lee <cosmo@echonyc.com> writes >I've been called in to troubleshoot an Online installation. The problem >is that upon startup, Online immediately starts to "dynamically" >allocate additional shared memory segments. The logfile shows…
Re: Online is RAM-Hungry
Online is supposed to dynamically allicate virtual shared memory as needed by sessions in progress. What is running shen you "startup". Also, issue onstat -g seg to see how big Virtual portion on shared memory is at startup. I guess one possibility is that the Online instance is…
Re: Checkpoint duration increase with 7.22.UC1
In article <5lak28$ssn@cssun.mathcs.emory.edu>, Kernoal Stephens <kernoals@earthlink.net> writes >I recently upgraded from 7.13.UC2 to 7.22.UC1. > >With 7.13.UC2 my checkpoint duration was averaging 4.5 seconds. >I used the same onconfig settings with 7.22.UC1 and my average >che…
Re: Checkpoint duration increase with 7.22.UC1
In article <5kq94e$o4q@cssun.mathcs.emory.edu>, Kernoal Stephens <kernoals@earthlink.net> writes >I recently upgraded from 7.13.UC2 to 7.22.UC1. > >With 7.13.UC2 my checkpoint duration was averaging 4.5 seconds. >I used the same onconfig settings with 7.22.UC1 and my average >che…
Re: Resizing Logical Logs
Also, there is a MAXLOGS parameter in the onconfig file that should be increased. Madison Pruet…
Re: Not glo-ing
>When I do onstat -g glo > there are some columns that are not documented anywhere. >Could someone please identify these? > > sched calls thread switches yield 0 yield n yield forever > >The yield columns are a mystery to me. When the engine is running, the Virtural Proc…
Re: ONCONFIG
Kerry Davids wrote: > > Jacob Salomon <jake@apparel.net> wrote: > > >Patrick, > > >onconfig.std is meant as a template to copy from. If I had my druthers, > >I would have it shipped with 666 permissions so that even user Informix > >could not (or at least is less likly to) inadv…
Re: ONCONFIG
>From: satriguy@aol.com (SaTriGuy) >Date: 21 Jan 1997 06:01:04 GMT >X-Informix-List-Id: <news.32813> > >If I had my way, I'd remove it from the system all together so that it >would not be possible to 'accidentally' use the wrong onconfig. ;) >Madison Pruet I think the 'it' refe…
Re: ONCONFIG
If I had my way, I'd remove it from the system all together so that it would not be possible to 'accidentally' use the wrong onconfig. ;) Madison Pruet…
Re: ONCONFIG
Jacob Salomon <jake@apparel.net> wrote: >Patrick, >onconfig.std is meant as a template to copy from. If I had my druthers, >I would have it shipped with 666 permissions so that even user nformix >could not (or at least is less likly to) inadvertently modify it. >(Actually, in …
RE: ONCONFIG
Hi Patrick! OK. please check with env command to see the ONCONFIG environment variable, this sould containg the file being use at this moment, and please, make a copy before you make any changes, Regards :) ---------------------------------------------------------------- Mario…
RE: ONCONFIG
You have to check your env variables. One of them is ONCONFIG which will be set to either of the files. Munaf g086mnf@bomplant3.appl.ge.com ---------- From: informix-list-owner[SMTP:informix-list-owner@rmy.emory.edu] Sent: Friday, January 17, 1997 4:04 PM To: informix-list S…
Re: ONCONFIG
In <32DF327E.1DBB@mediacity.com.sg>, Patrick Stacey wrote: }I see 2 onconfig files in my etc directory (sol 2.5.1 platform). } }one has .ifmx and the other .std } }which do I edit in order to change the system configuration? }Specifically I want to configure informix for a multip…
Re: ONCONFIG
Patrick, Type the command "onstat -c | more". This option prints a copy of the current configuration to the screen, but more importantly, the second line gives the path and filename of the current configuation in use. Tracy > > I see 2 onconfig files in my etc directory (sol …
Re: ONCONFIG
If you have to ask this you shouldn't attempt to modify the file. This is RTFM, very much so. You'll depend on knowing so much before tuning OnLine in this way that if you have missed this in the manuals, you may also have missed a lot of other info. Sorry for this. I don't mean …
Re: ONCONFIG
Patrick Stacey wrote: > > I see 2 onconfig files in my etc directory (sol 2.5.1 platform). > > one has .ifmx and the other .std Patrick, onconfig.std is meant as a template to copy from. If I had my druthers, I would have it shipped with 666 permissions so that even user nform…
ONCONFIG
I see 2 onconfig files in my etc directory (sol 2.5.1 platform). one has .ifmx and the other .std which do I edit in order to change the system configuration? Specifically I want to configure informix for a multiprocessor machine (4 CPUs actually). many thanks, /pks -- [ Pat…
Re: ONLINE 7.2 tuned to simulate SE x.x
--0__=MWXdqK17S4lXPm6Boa5ZQi892ZYLpinD57lvkEjrgSjesbnTIR0Zkf0D Content-type: text/plain; charset=US-ASCII Are the OLTP from this environment? Setting PDQpriority to 50 makes EVERYTHING done by this server lower priority than the fortune cookie program. Recommend you set that to…
Re: ONLINE 7.2 tuned to simulate SE x.x
In article <5b26mc$8b8@cssun.mathcs.emory.edu>, billy@west.co.za ("Billy Wheeler") wrote: >Hoo-boy! This was a very ill-advised decision. You don't just install >OnLine 7.2 - you should have done training or had consultants in to >advise you of the various things you can and s…
Re: HELP on shared memory segments increasing in a MAD way
Fernando.Collalti@orbit.net ("Collalti, Fernando") writes: > Hello, problems, problems, problems...... > It seems that after less than 1 hour the engine collapses. > With HELP from Neil Truby now is getting better(decreasing > LRU_MAX_DIRTY and LRU_MIN_DIRTY) > > The system: HP9…
Re: Help I'm in crisis
Hi Tony, Check you $ONCONFIG file if the PDQPIORITY > 0, modify it to be 0, that means disable PDQ in $ONCONFIG. Please set PDQPIORITY as user environment variable for large report/ bach job only. Otherwise, every single session takes a lot of memory. Regards Eric Lam Taipei/Tai…
Re: HELP I'm in crisis
Collalti, Fernando wrote: > > Hello, > > System: HP HP9000 E35, 132MB RAM, Online 7.12.UC3 > These are my NEW Shared Memory Parameters: > LOCKS 2000 # Maximum number of locks > BUFFERS 30000(old=5000) # Maximum number of shared buffers > NUMAIOVPS …
Re: Loads of Paging Happening
Fernando writes: }We have a Delphi application that runs for more than an hour, the paging on }the }system is incredible!! After less than an hour the system "sits down"...... }I'm not able to use the system anymore. Not even thake the engine off-line. }The system is HP 9000 E35…
Re: Incredible paging on the system
Collalti, Fernando wrote: > > Hello, > > We have a Delphi application that runs for more than an hour, the paging on > the > system is incredible!! After less than an hour the system "sits down"...... > I'm not able to use the system anymore. Not even thake the engine off-line. >…
Re: onconfig
Hi Sue, >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this question may >appear to come from a simpleton. Stop right there. Go and fin…
Re: onconfig
> From: Sue Alsbury <salsbury@mdshealth.com> > Date: Friday, October 18, 1996 4:11 PM > > Hi there. I am an Oracle/Sybase dba. I've just been put on a project > which uses Informix Workgroup Server V7.12 on Windows NT. I have no > training or manuals in either Informix or NT, so …
Re: onconfig
In article <3267E47A.54DA@mdshealth.com>, Sue Alsbury <salsbury@mdshealth.com> writes >Hi there. I am an Oracle/Sybase dba. I've just been put on a project >which uses Informix Workgroup Server V7.12 on Windows NT. I have no >training or manuals in either Informix or NT, so this …
onconfig
Hi there. I am an Oracle/Sybase dba. I've just been put on a project which uses Informix Workgroup Server V7.12 on Windows NT. I have no training or manuals in either Informix or NT, so this question may appear to come from a simpleton. I issue a select * from tablename. The tab…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
RE: TCP SOCKETS ON ONLINE 7.10.UC2 ON SILICON GRAPHICS IRIX 5.3
In <3173EA9F.758C@erbamatta.arch.unige.it> Serafina Raneri <sraneri@erbamatta.arch.unige.it> writes: > >Has anybody ever tried to configure tcp/ip sockets on a Silicon Graphics >with Irix 5.3 and On-line 7.10.UC2. >I tried with this results!!!! > >Tue Apr 16 11:43:24 1996 > >11:4…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Process Priority with onilne 4.10
Does Online ver 4.10 have fixed priority support like ver 7.0 does with the NOAGE onconfig param. Thanks Chris…