Oninit® Archive
Results for “onstat -g mem”
Gathering EXTREME amounts of time in %sys CPU
<snip - delete a lot of old text> David Williams wrote in message <0mcD2LAtTeo2EwkJ@smooth1.demon.co.uk>... > Several... >>> Have you seen anything like this ? > > Not exactly, the only time I saw a system freeze that hard was an old > 7.1x running against Pyramid which hung …
onstat -g seg reveals several virtual segments many show a pool summary of 17184.H.sd
Hello removing RALLOC_MODE POOL will not change to overall need for memory. It will only generate less pools. A shorter onstat -g mem can be better to identify pools which are growing when "allocating additional shared memory segments" is ongoing, Support can help here. But suppo…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Question of dostats
Yes. Many dostats rune used two connections egging you cannot do over a shared memory connection. There is an option to use a shared memory connection but then you can only process one database per run. Art ------------------------------ Art S. Kagel, President and Principal Con…
Shared Memory
Hello, Today I checked the Informix shared memory by onstat -g seg on Informix 14.10FC6X3 informix [rs-om-ifx-201] on_nebula21 $ onstat -g seg IBM Informix Dynamic Server Version 14.10.FC6X3 -- On-Line -- Up 16:43:49 -- 10327040 Kbytes 2021-09-03 15:36:42 Segment Summary: id …
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
Bufferpool configuration
Hi informix community, on a SPARC M10-1 Server we have a informix 12.10FC10 instance. Currently this instace use a buffer pool with around 7GB. Now i have the chance to configure the buffers up to 40GB. I would like to use the following configuration of the buffer pool: BUFFER…
SHARED MEMORY ALLOCATION
Note that DS_NONPDQ_QUERY_MEM is limited to 25% of DS_TOTAL_MEMORY. Neither DS_TOTAL_MEMORY nor DS_NONPDQ_QUERY_MEM are carved permanently out of SHMVIRTSIZE but are allocated from there as needed and released. I can alleviate Benjamin's fears. The total of DS_NONPDQ_QUERY_MEM u…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Re: 12.10.FC9 1809 Error
i'm just connecting on shared memory (onipcshm in sqlhosts) regards…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Issues With Restore
I tried it well 10 times now, but it is now saying: Warning: Fatal error in shared memory creation…
identify what is allocating memory
original post: <some stuff deleted> @Jacques , Thank you for your explanation. Please, can you answer my question below? If I get the sum of the column totalsize of all lines on 'onstat -g mem' (Pool+blkpool), should be close value of the used memory for the segments at 'onst…
sqlhosts file
For the sqlhosts file, if you have two servers (primary and secondary for HDR), will the sqlhosts file have 3 entries? Primary One for shared memory with name of primary and two for tcp(one for each server)? Secondary Same thing(3 entries) except for shared memory, it will have…
ids 11.50 shared memory for Workgroup Edition
Solaris 10 11.50.FC5 For the Workgroup Edition, is the maximum memory allowed shared between instances on the same server; or does each instance on the same server have access to the maximum allowable shared memory? Larry…
Odd Bufferpool Behaviou
Original post: AIX 6.1 IDS 11.70.FC8X8 I have a new machine with a lot of extra memory. Given that, I added a bunch of new buffers (4k, 8k, & 16k) and went to town testing away. Long story short, with all those new buffers, I get virtual segments added at startup. In onstat -g …
too many statements in memory
Hi, I would say you have to take a look in the java code which is probably not releasing the statements and/or resultsets. The connection pool cannot do that if the client code leaves statements open. This responsibility of the programmer to free everything after usage, unless i…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
Re: RE: Which session is using the most cpu resour
Thank you Michaelis. I am also looking similar to this scenario. That is how to find sessions which are using more system resources? Here are few sample output based on instruction in your post: Top command: top - 12:59:22 up 318 days, 20:53, 2 users, load average: 3.19, 3.93, …
shared memory issue
checking 'onstat -g mem' was already mentioned in one of the other responses. Consider collecting this output in intervals after this Informix instance was started. Then you should be able to see if there is a specific memory pool which grows constantly, for example. Also, this…
cpuvp efficiency AIX 7.1/IDS 11.5.FC8
Hello, Mark. 11.50 engine was not too accurate in onstat -g glo output (eff column). You should consider onstat -g glo (at least) in 11.70 (latest release) or even better in 12.10 engines. Consider an upgrade, mainly because 11.50 will soon enter in EOS. Regards. Alexandre Mari…
Panic analysis
Folks, IDS 12.10 FC4, Linux 6. The following log is the only info we have about the crash ( no other info dumped ) You can see it was struggling to add lot memories segments before Panic .... The Panic was a also VERY curious one with some unexpected process terminated ... Wha…
IO Wait and PDQ
PDQPRIORITY of 4 is low, Informix will allocate a small amount of memory and with PDQPRIORITY that low will not give much if any paralleism. A quantum of memory is DS_TOTAL_MEMORY / DS_MAX_QUERIES and PDQPRIORTY will determne what percentage of the quantums are allocated to the …
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
virtual segment question
HI, I use IDS10.0FC6 and found about 47 virtual segment. SHMVIRTSIZE= 1024000 SHMADD= 256000 ' onstat -g mem' show there are lots of memory usage in rsam. rsam V 7000001501b7040 11665981440 110064 117571 111 Whu ISAM can use so many memory? any suggestion would be apprecia…
new bufferpool
original post This concerns ids12.10TC3IE . These are the old lines in my onconfig... #BUFFERPOOL default,buffers=10000,lrus=8,lru_min_dirty=50.00,lru_max_dirty=60.50 #BUFFERPOOL size=4K,buffers=100000,lrus=8,lru_min_dirty=20.00,lru_max_dirty=30.00 #BUFFERPOOL size=16K,buffers=…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Buffer Size and Use
Folks, We recently had a conversation with a well-respected name in the Informix world, recently, concerning our bufferpool configuration. When exported, our database takes up only about 18 GB. We had a buffer pool of 12 GB, figuring that the more memory resident, the better. Al…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Help on jboss memory usage for persistant sessions
Hi, the problem is probably in the application, not in the database. When using a JDBC connection, each object should be closed after usage. ResultSet, PreparedStatement, Connection etc. When using a connection pool, the connection.close() method will return the connection to th…
ER network replication state
When we have a large transaction, or a large blob to replicate, if the queue mem size is about to be exceeded, then we do two things, 1) we sp= ool the transaction to disk and 2) notify the source not to send any new transactions until the large transaction is processed. This is …
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Bufferpool max size in Windows Server 2008 64bit
Hi, I restarted engine once more and now it looks right. So, probable user error! Are there other memory parameters that would benefit from very large values? Thanks, Lauri d:\\\\Program Files\\\\IBM\\\\Informix\\\\11.70>onstat -X IBM Informix Dynamic Server Version 11.70.FC…
Increased Swap usage by IDS
Don't use top to see memory utilization by Informix, look at onstat - or the Total line of onstat -g seg. Your Informix engine has only allocated about 569 MB. Each of those oninit processes in top are attaching to the same shared memory segments and that is why top gives the im…
shared memory
This concerns IDS 11.70.TC5IE on Windows Server 2008 . This article http://publib.boulder.ibm.com/infocenter/idshelp/v117/index.jsp?topic=%2Fcom.ibm .perf.doc%2Fids_prf_750.htm defines buffer_value = (BUFFERS * pagesize) + (BUFFERS * 254) + 250000and goes on to say: âIf you hav…
Efficiency of the Informix Virtual Processors
Dear All, IDS 11.50.FC8W2 on Hp-UX 11.23 (12 core - 55 GB mem to informix) No other instance running on this machine. I was reading a post by john on http://www.jfmiii.com/informix/?p=194 It say that if the efficiency drops below 80% (onstat -g glo output) then there seems to …
Memory down and shared memory not initialized
I compiled utils2_ak. When executing printFreeB I got a message the library libifsql.so could not be found. So I put the lines below in /etc/ld.so.conf and exectued ldconfig. /opt/informix/lib /opt/informix/lib/c++ /opt/informix/lib/cli /opt/informix/lib/csm /opt/informix/lib/dm…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
Linux: oninit returns "shared memory base address illegal", fails to start
Art, I've been getting that error message "Insufficient free huge pages in /proc/meminfo for shared memory segment. Requested: 204800000 bytes. Available: 0 bytes. The default memory page size will be used." since I first installed and configured. The engine…
Problem with identifying root cause of continual m
original post: Hi to all, I have a problem with identifying root cause of continual memory consuming by db-sessions. Our OS: AIX Our IDS: 11.70.FC3 Application layer is Weblogic Application server and the interface is JDBC driver. During investigating this issue I was able to i…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
onstat -g mem question
I'm seeing some memory segments I need some info on: SCDR2988661 V c00000004d9e7040 4096 800 1 1 SCDR3298189 V c00000004dc15040 4096 800 1 1 SCDR3298495 V c0000000541b8040 4096 800 1 1 SCDR3299197 V c00000004de08040 4096 800 1 1 SCDR3374788 V c000000048582040 4096 800 1 1 I'm s…
onstat -g mem questuion
Hi Folks, IDS 11.50.FC5 O/S AIX 6.1 Can someone explain the significance of the "*00" at the end of a session id/pool name in an onstat -g mem output? TIA, Dan…
11.50.FC8 aio memory pool allocation seems high
after upgrading our client from 11.50.FC5 to 11.50.FC8 (aix) , the engine uses aprx 130 meg more of virtual shared memory. By comparing historical onstats between the two versions the increase is in the aio memory pool (~230 meg) , where on FC5 the usage topped around 90 megs... …
Shared memory connection to HDR Secondary
Folks, IDS11.50 FC8, Redhat Linux It is not allowed to have a shared memory connection to a HDR Secondary( with dbacess..), is it? Thanks, Frank --001517588cfa01cb4304b178d099…
tempdbs used by a ghost
Alberto Romeu Pessonio Filho Wrote: -------------------------------------------------------------------------------- Hi guys!!! Sorry to forget this: IDS 11.50 FC7W1GE Linux Redhat x86_64bits Art: My system wasn't in archive mode when the issue happened. I suspect that we are…
Increase buffer pool size
Dear All, i found the following line in the message log of an IDS 10.00 on a Linux Box having 3GB memory: WARNING: Buffer pool size is too small for read ahead operation I would like to increase this parameter, as obviously it has the default size of 5000 buffers with a 2k page…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
What is virtual about Informix "virtual segment of shared memory"?
In the IDS memory architecture, why is the "virtual" portion of shared memory called "virtual?" It seems to reside in that portion of physical memory that the O/S designates to share between multiple processes, but never seems to have anything to do with swapping/paging to disk.…
Re: 11.70.tc1IE limits
Thanks, Doug. I will try that Monday. Sorry about this email, but Windows Mail says I don’t have a Simple Mapi-compatible mailer installed, so I cannot just hit “reply all” . Hi Bill. There is more than one issue here, but mostly you need to work out what the memory leak is. C…
ids 11.70.TC1IE limits
Hi Bill. There is more than one issue here, but mostly you need to work out what the memory leak is. Can you watch "onstat -g ses" and "onstat -g mem" to spot which session or shared memory pool is growing? If it's a session, use "onstat -g ses session-id" to find out the detail…
IDs tries to allocate virtual memro segments
Hi, We are using IDS V11.50.FC8 on HP and we have a strange behavior. The engine tries to allocate virtual segments non stop. The engine has been running since the end of April without any problems. The engine allocated a bunch of virtual memory segments until it reached the …
why does DS_NONPDQ_QUERY_MEM have the prefix "DS"
Yes. It comes out of DS_TOTAL_MEMORY. Art On Jun 20, 2011 5:09 AM, "YE XIE" <xieye@cn.ibm.com> wrote: > In Informix Administrator's Reference, I see: > Use the DS_NONPDQ_QUERY_MEM configuration parameter to increase the amount of > memory that is available for a query that is no…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Instance Crashed !!
What must be the ratio of Resident Memory & Shared Memory that we can allocate initially ? What is the impact of # of Buffers & its size to the size of Resident Memory. Thanks.…
Shared memory segments
Don't have an answer for you off hand, but I did fix your subject line so it doesn't look like spam. --EEM -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of qingchuntrade Sent: Monday, December 27, 2010 7:54 PM…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
CDR Grouper FanOut thread is aborting
Folks, Build Version: 11.10.UC2 Build OS: AIX 5.3 The ER does not work properly due to a "out of virtual shared memory " problem in one site. Is there any EASY DRUG to treat "CDR Grouper FanOut thread is aborting." ? (instead of recreating whole the ER) Thanks, Frank .......…
SQL running too slow in IDS 9.4
Hi All, This has been asked again and again.. I'm curious how can i tell that i need to do the ff: 1. Update statistics -- this just been executed during the weekend, 5 days now. 2. How can i identify what causes excessive memory use? i did onstat -g mem, onstat -g iov for virt…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Shared memory problem
IDS 9.40 UC4 on Linux (yes, I know ...) 1. Initialising the instance with a shared memory connection it just hangs at: 01:09:26 Maximum server connections 0 01:09:26 Dataskip is now OFF for all dbspaces 01:09:26 On-Line Mode 01:09:26 Building 'sysmaster' database ... Never…
Post-Upgrade HPL issue
I want to add that there was a single config change made to the onconfig on the affected instance - we doubled shmvirtsize, going from 1 gig to 2 gig. The issue seems resource related for sure. I just started another set of jobs, only running two at a time and they ran fine. When…
Alarm for New virtual shared memory segment
Hello, I was wondering if there is any way for Informix to alert us if it "Dynamically allocated new virtual shared memory segment". I tried getting the ALARMPROGRAM to alert, though it seems that this action does not trigger the ALARMPROGRAM. Any ideas? 16:17:26 Requested s…
951: Incorrect password or user informix is not kn
Hi, I forgot to mention that, on this instance i can connect with an unix user other than 'informix'. Doesn't this alleviates the assumption of 'a lack of shared memory or a problem with shared memory' ? Regards…
shared memory parameters
Having trouble with share memory parameters. I am trying to locate each piece of the memory size number reported by "onstat -". So far I have been able to correlate changes in onconfig with changes in that onstat number. However, I haven't been able to get it all and can't seem t…
2 shared memory segments
Informix 10.00.HC5 HP-UX 11i v2 Recently, I've started getting message like the following when I restart the server Could not create single shared memory segment with resident and non-resident partitions. Proceeding to create 2 shared memory segments instead. Sometimes, the se…
how to analyze bottleneck in informix db
Hi All, I'm curious about on how to analyze a database which has bottlenecks... On my perpective, i'll do the ff: 1. onstat -u -- to check what user. 2. onstat -g ses -- to check the current session. 3. onstat -g mem -- to check the memory. 4. onstat -k; to check the processes …
shared memory not initialized for INFORMIXSERVER
When I try to start Informix Dynamix Server the following massage appears: shared memory not initialized for INFORMIXSERVER Any idea???…
shered memory not initialized for INFORMIXSERVER
When I am trying to start informix server the following massage apears: shared memory not initialized for INFORMIXSERVER Any idea??????…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
shared memory not initializing
Hi All, Can anybody help me. My shared memory not initializing and IDS was working fine before restore and restored was failed in the middle. I have executed oncheck -pr and getting below error. ONCONFIG config file error on element PHYSFILE. Value in reserved page: 30000 Val…
shared memory not initialized for INFORMIXSERVER
________________________________ From: Tang, Wally, CTR, DMA-Riv/IT Sent: Friday, September 18, 2009 9:28 AM To: 'ids@iiug.org' Subject: shared memory not initialized for INFORMIXSERVER Hi, On our development server (IDS 7.31.UD6 on HPUX B.11.11), when we executed dbaccess dbn…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Informix virtual shared memory
We are running Informix 9.40.FC4 on HPUX-11i. For the past few weeks, we are experiencing this problem. The informix server keeps continuosuly allocating memory and never releases it back and allocates many virtual shared memory segments and finally runs out of shared memory and …
IDS instance memory
Hi, We are running 4 IDS (11.5 FC4) instances on a sun sparc machine with 8 GB physical memory. We can see the shared memory through "onstat -" command which is around 1 G. This machine is purely acting as databases server and no other application is runnig on it (like web applic…
Re: Informix RESIDENT and Solaris 8 and 10 swap usage
On Jun 29, 10:17 am, Koya <chav...@gmail.com> wrote: > On Jun 29, 8:42 am, Eric Rowell <erow...@gmail.com> wrote: > > > > > > > Koya , > > Wish I still had access to my old Solaris systems (past live), this is > > what I remember. > > > There was a change to the mapping a…
Informix RESIDENT and Solaris 8 and 10 swap usage
On 26 June, 20:55, Koya <chav...@gmail.com> wrote: > Hello all, > > I have the follwoing question about RESIDENT and swap usage in > Solaris. > > My understanding is if we set RESIDENT value greater than zero, swap > should not be used. If this is corrent, do you have any idea w…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
-25588 error after CPU & fiber channel failure
John, See if the app can connect if it uses the network connection (carsitcp) instead of the shared memory connection. Mike…
syspools
>Jacques, > >Thanks very much for the response! > >We are wondering if it can be reused for other purposes if needed. The >concern is, we have total around 800M Virtual segment size, the "mt" >occupied more than 600M( see below). We have had some "out of Memory" >problems . It so…
Fatal error
Dear Friends, When i am try to onlining the informix i got this messages informix@DBSERVER> oninit -v -y Checking group membership to determine server run modesucceeded Reading configuration file '/export/home/informix/IDS0/etc/onconfig.voms'...succeeded Creating /INFORMIXTMP/.…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Informix allocating shared segments
It does sound like it could be a server memory leak. What you would want to do is to start monitoring onstat -g mem and onstat -g seg output. In the onstat -g mem output you would want to do comparisons on pool sizes and look for any pool or pools that might be continually growin…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
IDS 10.00.UC4 stalls
Marcus Delp wrote: > Hi, > > we are runing IDS 10 UC4 on a Novell Linux box with 4 GB Ram and 2 Dualcore > CPUs. There are severall applications driven by the IDS as some J2EE stuff > on apache Webserver, legacy Datablade applications and even some > PowerBuilder 3rd party applic…
virtual portion memory size
I believe that parameter can be tweaked in '/etc/system' and is called 'shmmax' >From /usr/include/sys/shm.h: /* * Shared Memory information structure */ struct shminfo { int shmmax, /* max shared memory segment size */ shmmin, /* min shared memory segment size */ shmmni, /*…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
The max size of BUFFERS in IDS9.40FC7 at Solaris?
That is means the maxsize of share memory segment is limited to 4GB... OK,Thanks all!…
Informix hang
Yaron Reinharts wrote: > Hi, > > We are running a Java application under load which uses Informix JDBC driver > The Informix server is located on another server > > First we tried static connection pool, everything seems to work fine however > for some reason we can not use stati…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Update from Digital 7.31.FD1to ....
Baan IV run not on the same machine and connect to the informix server with an 1GB crossoverethernetcable. so we use not Shared Memory to access the database!…
Virtual segment usage - now I'm confused.....
OK we managed to catch the process that blew up our Virtual portion. It's a remote PHP/javascript application that establishes a connection via jdbc to the database (9.30HC5 on HP/UX 11i). We managed to fire off an onstat -a and having used onstat -g mem to get the sid, found the…
Dynamic Virtual segment allocation - finding the cause?
IDS9.30HC5, HP-UX11i One of our hundreds of users has run something that's caused extra virtual segment allocation. Background: The system runs for months on a single Virtual segment of 600Mb, quite happily day and night with up to 300 connections, all running any one of the hund…
"Dynamically added new Virtual segment "question
> What do I do? (and don't start me on onmode -F on HP-UX!!!!!!!!!!) > First off is onstat -g seg to find the address of the new segment, no > problem. > But once I've done that, what's the next move? > I'm guessing onstat -g mem and find out what processes have a pool > starting…
shared memory limitations
Hi folks does someone know what are the maximum shared memory size that can be used both in IDS9 and IDS10 Thanks…
shared memory already exists
I am using IDS 9.40, I get message informix log below, after I shutdown and take offline the database: 14:38:05 IBM Informix Dynamic Server Started. 14:38:05 shmget: [EEXIST][17]: key 52564801: shared memory already exists 14:38:05 mt_shm_init: can't create resident segment Cou…
Re: shared memory not initialized
Tom I may have missed this in the variety of posts ! but do i understand this is a new installation and has never run? If so have you actually initialised the engine (oninit -i) at any time? Keith On 13/08/07, Ogiwara Tsutomu <tsutomu_ogiwara@hotmail.com> wrote: > Hi Tom. > > …
Re: shared memory not initialized
Thanks Andreas, The system is resolving the host name fine. uname -n reports informix. when i ping informix, i get a reply from the correct IP, 192.168.26.66 Still no luck Tom On Aug 9, 4:55 am, Andreas Breitfeld <abrei...@de.ibm.com> wrote: > Maybe my hint regarding the 'set…
RE: shared memory not initialized
You didn't need to run oninit -v the second time, the first time (oninit -ivy) was enough. The second time around it tries to pop memory back in the same place as the last one. Check if the first one is still running: onstat - It probably is. If not, then you may have corrup…
RE: shared memory not initialized
The holy trinity is ONCONFIG, sqlhosts and /etc/services. Your entries look ok at this point - sounds like your rootdbs either does not exist or has wrong ownership/permissions (previous note). You also need environment variables: INFORMIXSERVER=informixserver (in your case) ON…
shared memory not initialized
I have just installed Informix 10 on a CentOS 4.5 system. When I run oninit -v to start the dbserver, I get the following, and then it dumps me back to bash: [root@informix informix]# oninit -v Your evaluation license will expire on 2007-10-30 00:00:00 Checking group membershi…
Re: Strange behaviour of the buffer pool
Looking at a larger instance on the same versions I can see the "resident" pool being 354MB while the "res-buff" being the same the BUFFERS setting: onstat -g mem|grep " R " res-buff R c00000001669d040 1280004096 2848 2 2 resident R c000000000491040 …
Strange behaviour of the buffer pool
On Jul 17, 6:10 am, RoB <pluma...@gmail.com> wrote: > Hi all, > > IDS: 9.40.FC3W2 > OS: HP-UX 11.11 > > What am I missing here? An instance is unexplainably allocating 224 MB > of buffer pool in addition to the amount configured. > > The BUFFERS onconfig parameter is set to 6250 …
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: Slow database creation and loading
On Jun 18, 10:50 pm, "Jack Parker" <jack.park...@verizon.net> wrote: > If you are using HPL, that grabs it's own memory. Data does not go through > the normal buffer pool (unless you are using deluxe mode). You might not > want to increase buffers. I need to double check but I…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
how to fix the error "hpkaioaddseg: ASYNC_ADDSEG.
OK, it happen as Andreas Kutsche says. - enough memory/swapspace/shared memory available, enough segments available the IDS allocates a lots of segments,so the error act.…
Memory leak on AIX 5.3
Reading through this my impression is that this APAR talks about authorization functionality and the msc VP growing in size. What Mirek described looks like Informix session memory is growing rapidly within IDS shared memory - if I don't misinterpret what he's saying about the '…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: Bizarre sysmaster/IDS 10 problem
> > you can try to run variations of commands "onstat -g ..." commands, > > like options "ses [session id]", "mem ...", "afr ...", "ffr ..." and "ufr > > ...". An onstat -g mem shows that all of the memory involved goes to the "rsam" pool. And although it doesn't free when sess…
RE: 10.0 xC6
With 10.0fc5, if Secondary is restarted, then, before HDR resumes, Secondary completely re-initializes all logical logs (actually, it fully re-writes logical logs ....) In 10.0fc4, it usually takes minutes to bounce Secondary and make it available back online. With 10.fc5, it mig…
Re: 10.0 xC6
Hey Alexey, What is the HDR problem with xC5? I'm currently troubleshooting a long checkpoint problem with HDR configured and am wondering if the bug you are experiencing is related. Thanks, Andrew ----- Original Message ----- From: "Alexey Sonkin" <alexeys@cidc.com> To: "Ne…
RE: 10.0 xC6
David, 'onstat -g afr' should be used with a specific memory pool from 'onstat -g mem' that has a big memory allocation. As I mentioned, 'onstat -g mem' doesn't show anything at all for this case: memory is leaking to nowhere. ------------------------------------------ Alexey…
shared memory already exists
HI, guys, AIX5.3 , IDS UC5 If we see the following problem, the only way is to turn off/on the power? informix@otto $ oninit oninit: Fatal error in shared memory creation informix@otto $ informix@otto $ onstat -m *** WARNING: IBM Informix Dynamic Server is no longer running. …
IDS is busy all the time
Art, Thanks for offering this help, I now solved the problem by restoring the database. And: We do use you dostats, was a misspelling of mine. What I found out, which might interest others is the following: We had a crash of the server, at a point in time where the session in qu…
Re: error initializing
Juan Pablo wrote: > Hi: > > when initializing my INFORMIX leaves the following message to me error: > > $ oninit -v > Checking group membership to determine server run mode...succeeded > Reading configuration file '/usr/informix/etc/onconfig.nazca'...succeeded > Creating /INFORMI…
error initializing
Hi: when initializing my INFORMIX leaves the following message to me error: $ oninit -v Checking group membership to determine server run mode...succeeded Reading configuration file '/usr/informix/etc/onconfig.nazca'...succeeded Creating /INFORMIXTMP/.infxdirs...succeeded Creat…
error initializing
Hi: when initializing my INFORMIX leaves the following message to me error: $ oninit -v Checking group membership to determine server run mode...succeeded Reading configuration file '/usr/informix/etc/onconfig.nazca'...succeeded Creating /INFORMIXTMP/.infxdirs...succeeded Creat…
shared memory
In our IDS 7.31 server, onstat -g seg displays seven 'V's (Memory Segments). SHMVIRTSIZE 100000 SHMADD 100000 SHMTOTAL 0 At present 6th "V" is in use and one is free. Each memory segment is quickly getting exhausted. Why its getting utilised very quickly im running update stat…
Re: ISQL install problem
Hi Clive, I do have an unlimited shared memory connection, but am not sure of any others - is there a way that I can check this? Thanks Andy…
shared memory and tempdb spaces
I'm pretty new to Informix and AIX and have a bit of a problem. The Informix log is showing the error "out of shared memory segments". From the other posts I've figured that we've hit the 2GB SHM limit and are probably going to move to the 64bit platform, but in the meantime I'…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Shared Memory
HI,I hava a problem. /home/informix/etc>onstat - Informix Dynamic Server Version 9.30.UC4 -- On-Line -- Up 103 days 05:37:36 -- 269068 Kbytes How does it is calculate for "269068 Kbytes" ? tks…
RE: Contiguous shared memory segment allocation failed at 0xd0000000
SHMBASE is different in your config from standard - why? How much shared memory is allocated to this instance (onstat -g seg) ? How many locks do you need for this process (16:10:23 dynamically allocated 100000 locks) ? OR you could lock the table. You need to configure LOCK…
Contiguous shared memory segment allocation failed at 0xd0000000
I was doing a mass update, delete ( big transaction) and found the info in online log, 16:10:21 Maximum server connections 21 16:10:23 Requested shared memory segment size rounded from 8604KB to 8608KB 16:10:23 Contiguous shared memory segment allocation failed at 0xd0000000.…
Contiguous shared memory segment allocation failed
I was doing a mass update, delete ( big transaction) and found the info in online log, 16:10:21 Maximum server connections 21 16:10:23 Requested shared memory segment size rounded from 8604KB to 8608KB 16:10:23 Contiguous shared memory segment allocation failed at 0xd0000000. Al…
shared memory not initialized for INFORMIXSERVER
Greetings all- I'm looking for a nudge in the right direction for an issue I'm having. I'm running IDS 7.31.UD3 on W2k Server SP4. localhost name is cognos INFORMIXSERVER=data_archive I am working at the console of just the server. (not connecting via network) I am getting an …
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
onstat shared memory error
I am running INFORMIX IDS9.40 on Slackware 10.1 and everything works fine except that informix cannot run onstat due to the shared memory: permission denied error. The database chunks reside on a smart array disk system, so I did a raw /dev/raw/raw1 /dev/cciss/c0d0p3 so I woul…
Update statistics and shared memory
We are not exactly sure what our problem is, but any help would be greatly appreciated. We are running IDS 7.31.UD3-1 on AIX 4.3.3. We have been experiencing a problem for a number of years, but it had not been one that has caused us any major problems untill recently. Here is t…
ER transactions queuing, NIF in BLOCK state
DL Redden wrote: > One of our servers in a 4-way update anywhere ER topology is currently > not staying caught up, i.e. transactions from the other three servers > are queueing but slowly getting sent and applied. The culprit seems to > be the network interface. An onstat -g nif …
Re: Virtual shared memory: aio pool
"After restart IDS with unset SECURITY_LOCALCONNECTION, aio pool is not increase." Log a support call with IBM.…
Virtual shared memory: aio pool
http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=DB520&uid=swg21216394&loc=en_US&cs=utf-8&lang=en After set SECURITY_LOCALCONNECTION to 1 on IDS 9.40FC6 (Sun Solaris) , size of aio pool increased to 334 MB over 4 days. After restart IDS with unset SECURITY_…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: shared memory segment size
The resident portion of shared memory depends on # of BUFFERS + # of LOCKS + LOGBUFF + PHYSBUFF + some SHM headers for more details - http://publib.boulder.ibm.com/infocenter/idshelp/v10/index.jsp?topic=/com.ibm.admin.doc/admin276.htm Regards, Nilesh Friday, May 05, 2006 10:31…
shared memory segment size
Why has my shared memory segment this size? This is the output from onstat -g seg Segment Summary: id key addr size ovhd class blkused blkfree 36 1384138753 a000000 1613758464 266640 R 393773 211 37 1384138754 6a…
Re: Virtual shared memory: aio pool
After restart IDS size increase to 1MB after 2 day work - total size 168MB free 26MB All connection ipcstr…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Virtual shared memory: aio pool
Hi! IDS 9.40FC6 onstat -g mem | grep aio Pool Summary: name class addr totalsize freesize #allocfrag #freefrag aio V 21e0c6040 670588928 105694536 816895 179934 onstat -g seg Segment Summary: id key addr …
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Shared Memory challenge on AIX 5.1
One of my sites has 1 Gbyte of RAM. I have configured them to use 512Mbytes of Virtual Shared Memory and about 256 Mbytes of Resident Share Memory. RESIDENT is set to 0. During normal processing everything is OK with those settings. Occasionally the size of the virtual shared m…
Does "onmode -F" always work?
Hi, onmode -F does two things: 1) It searches all memory pools and tries to free any freeblks in each memory pool. Those freeblks belong to the memory pool, but are unused. When 'onmode -F succeeds, it returns the memory to the the the free memory in the segment. You should …
Check INFORMIXDIR and DBLANG.FAILED
Hill, what could have caused it ? angel:/opt/informixids/msg/en_us/0333}oninit -v Checking group membership to determine server run modesucceeded Reading configuration file '/opt/informixids/etc/onconfig.angel'...succeeded Creating /INFORMIXTMP/.infxdirs ... succeeded Creating …
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Re: IDS 7.30 do not start - NT
Your server only has 512M of memory. Check you onconfig parms and reduce the number of buffers, SHMVIRTSIZE, locks etc to reduce the amount of share memory requested, then start your server. Good luck, Brian >Hello, > >i have a problem with the informix database. It is on WIN …
Shared Memory not Initialized for INFORMIXSERVER on Informix IDS 7.31
For more informatio in my Log file appears: 09:23:21 (3) failure, system out of semaphores 09:23:21 Dynamically allocated new message shared memory segment (size 352KB) 09:23:21 Requested shared memory segment size rounded from 344KB to 352KB 09:23:21 Requested shared memory seg…
oninit: Dictionary Cache and SPL Routine Cache error
I am having some trouble initializing shared memory on Solaris 9 with Informix IDS 9.4. --------------- $ oninit -ivy Checking group membership to determine server run modesucceeded Reading configuration file '/dbms/informix/etc/onconfig.site'...succeeded Creating /INFORMIXTMP/…
unable to attach to shared memory
Hi All, Tech Specs: IDS 7.31.FD7 O/S - Solaris 5.8 Generic_117350-26 sun4u sparc SUNW,Sun-Fire oncheck and onmonitor are giving errors: shmat: [22]: operating system error Unable to attach to shared memory. onstat -g seg gives Informix Dynamic Server Version 7.31.FD7 …
Shared Memory Permission Denied
Hi, when i execute onstat with informix user send this message: onstat: = Shared memory: permission denied. or when i go into onmonitor and sel. an option send the message: Unable to attach to shared memory. Permission denied Informix IDS 7.31.UD3 Unix, Solaris 5.6 thanks in a…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: Re: oninit error .. [5496]
$ oninit -ivy Checking group membership to determine server run modesucceeded Reading configuration file '/opt/informix/etc/onconfig.padbv2'...succeeded Creating /INFORMIXTMP/.infxdirs ... succeeded Creating infos file "/opt/informix/etc/.infos.padbv2" ... "/opt/informix/etc/.co …
Latch waits
I'm seeing quite a highish level of latch waits (lchwaits) - whats the best way to reduce this? Increase the shared memory?…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Re: See placeholders in IDS 9.30?
malc_p@btinternet.com wrote: > IDS9.30HC5, HP-UX 11i. > IBM tech supp have said "no", but I'm wondering if anyone out there > knows if there is a (backdoor?) method of looking at the mem dump of a > thread to determine what values are being used for the placeholders > shown under…
See placeholders in IDS 9.30?
IDS9.30HC5, HP-UX 11i. IBM tech supp have said "no", but I'm wondering if anyone out there knows if there is a (backdoor?) method of looking at the mem dump of a thread to determine what values are being used for the placeholders shown under onstat -g ses for a 4gl connection? I …
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
error the running INSTANCIA
Hi: Cuando inicio la instancia me sale el siguiente mensaje de error.... alguna idea, se los agradecere. Me pueden dar una pista ??? saludos ============================================================= Checking group membership to determine server run modesucceeded Reading co…
error the running INSTANCIA
Hi: Cuando inicio la instancia me sale el siguiente mensaje de error.... alguna idea, se los agradecere. Me pueden dar una pista ??? saludos ============================================================= Checking group membership to determine server run modesucceeded Readin…
Re: RESIDENT and BUFFERPOOL
David E. Grove wrote: >>On Solaris the 4MB page size is used for any segment made resident, no >>matter how many there are. > > Since page size is now settable in IDS 10, does the above have any > implication on specifying a BUFFERPOOL page size? I'm no sure whether you understa…
Re: RESIDENT and BUFFERPOOL
David E. Grove wrote: >>On Solaris the 4MB page size is used for any segment made resident, no >>matter how many there are. > > Since page size is now settable in IDS 10, does the above have any > implication on specifying a BUFFERPOOL page size? I'm no sure whether you understa…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
IDS 10 Download?
So many questions... I have played with multiple buffer pools and different page sizes... creating a dbspace with an 8k page size..oh wow! Make size is only 16K though...oracle (where I guess this idea came from) allows 64K! onstat -h (buffer hash chain info) gives two outputs …
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Re: shared memory weirdness
Ian Spare wrote: >We're running a very old version of HPUX and Informix, the system will >shortly be retired so we're limping along for a short time. > >We're running out of shared memory though and it's killing the database, >to an extent it's something we're going to have live…
shared memory weirdness
We're running a very old version of HPUX and Informix, the system will shortly be retired so we're limping along for a short time. We're running out of shared memory though and it's killing the database, to an extent it's something we're going to have live with but something puz…
Connection Pooling for 4GL/dbaccess
Hello all, Our application relies heavily on many short lived 4GL and dbaccess sessions. In the process of some performance tuning, I am noticing that executing a simple query through dbaccess on clients (remote from the DB server using tlitcp), can take anywhere between 100 an…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
out of virtual shared memory ; buffers not flushed
----LNX_Thu_Aug_12_2004_09:59:36_V3.33-- Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable >Datum: 2004.08.12 08:43:24 >Sender: PATRICK LEY <patrickley@excite.com> > >Dear All, >I have the following log information which complain about ou…
virtual memory segments added
onstat -g mem displays the pool names (first column) onstat -g afr <poolname> displays the allocated fragments by address. If you run onstat -g seg, you get the logical address of the shared memory segments. Somthing like... for f in `onstat -g mem | cut -d ' ' -f 1 ` do o…
problems of Inztallation's
Hi: I have problems with thle installation of IDS. Plataform: HP-UX 11.11 IDS: 7.31 FD8 I cannot initialize !!! If I want to iniciarlize via onmonitor .... the error is: shared memory not initialized for INFORMIXSERVER 'crazy_tcp If i want to inicialize vi command ..... the err…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Session memory usage
Hi, does someone know how much memory a user session takes on a Informix database server? How many concurrent user sessions can a normal server (4 GB primary memory) handle, before connection pooling is needed? /Fredrik…
Intitialization problem
Hi, I have a problem with IDS 7.31 on SCO 5.0.5 When trying to initialize IDS and it hangs. Here is the oninit -v command: # oninit -v Checking group membership to determine server run modesucceeded Reading configuration file '/usr/informix/etc/onconfig'...succeeded Creating …
Fatal error in shared memory
Trying to set-up Informix 7.31 UC4 on Solaris 2.6 everytime I try and start informix I get oninit: Fatal error in shared memory initialization I have set SHMBASE to 0x1000000 and also tried 0x1000000 as suggested in the documentation - both fail. The system has 512Mb of RAM and…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
cannot initialize root dbspace
$ oninit -iv This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine server run modesucceeded Reading configuration file '/informix/etc/on…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Memory usage-tm
Hi, informix consumes all machine memory. We have to stop and start informix. Pool with but memory is "TM". onstat -g mem tm Informix Dynamic Server Version 7.31.FD7 -- On-Line -- Up 15 days 09:44:44 -- 845824 Kbytes Pool Summary: name class addr totals…
Memory usage-tm
Hi, informix consumes all machine memory. We have to stop and start informix. Pool with but memory is "TM". onstat -g mem tm Informix Dynamic Server Version 7.31.FD7 -- On-Line -- Up 15 days 09:44:44 -- 845824 Kbytes Pool Summary: name class addr totals…
Memory usage-tm
Hi, informix consumes all machine memory. We have to stop and start informix. Pool with but memory is "TM". onstat -g mem tm Informix Dynamic Server Version 7.31.FD7 -- On-Line -- Up 15 days 09:44:44 -- 845824 Kbytes Pool Summary: name class addr totals…
RE: Memory allocation failed during query processing -AIX 5.1
you may need to issues few onstat commands (onstat -g seg, onstat -g mgm, onstat -g mem, onstat -u, onstat -g ses, onstat -g sql ) to see what exactly is happening with the query, it may be also possible that the kernel parameters are not set right. you may also set DS_MAX_QUERI…
onload consuming shared memory
Hi all, we're just about to start a full database restore to recover from a failed onload session. I just want to try and determine what might have gone wrong to see if how we can do it better next time. We want to onload a table with blob data of about 300000 rows and 11GB of …
shared memory not initiaized for INFORMIXSERVER
I'm removing the indexes and recreating them in my informix database and all the onstat commands were working fine. Now all of a sudden I am seeing this error when performing any onstat commands: shared memory no initialized for INFORMIXSERVER 'informixservername' Why is this?…
Print SQL information
New joke in IDS by IBM. [cnzp@chvl02 cnzp]$ onstat -g sql IBM Informix Dynamic Server Version 9.40.UC4 -- On-Line -- Up 1 days 03:43:16 -- 721340 Kbytes Must be a DBSA to run this program…
Re: Shared memory segment IDS 9.4
Wojtek, the server will allocate all the buffer's you have asked for. The rest of your buffers which will not fit in the first resident segment will go into the next virtual segment(s). You can look them up with onstat -g mem where you should see a pool named something like "ovr…
Informix IDS problem
Hi All, When I try to start the IDS 9.40 on HP PA-RISC machine, I get the following error. If I reinstall the IDS it works properly. If I shut down & restart the database it fails with the below message.. Checking group membership to determine server run modesucceeded Reading …
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
RE: informix session memory usage problem
Yasar, 'res-buff' is a database cache. I've never seen any memory leak in that pool. Memory leaks usually occur in 'V' segments - either 'global' or per-session pools ------------------------------------------ Alexey Sonkin > -----Original Message----- > From: yasarakman@isne…
RE: informix session memory usage problem
Yasar, 'res-buff' is a database cache. I've never seen any memory leak in that pool. Memory leaks usually occur in 'V' segments - either 'global' or per-session pools ------------------------------------------ Alexey Sonkin > -----Original Message----- > From: yasarakman@isne…
RE: informix session memory usage problem
Yasar, 'res-buff' is a database cache. I've never seen any memory leak in that pool. Memory leaks usually occur in 'V' segments - either 'global' or per-session pools ------------------------------------------ Alexey Sonkin > -----Original Message----- > From: yasarakman@isne…
RE: informix session memory usage problem
Yasar, 'res-buff' is a database cache. I've never seen any memory leak in that pool. Memory leaks usually occur in 'V' segments - either 'global' or per-session pools ------------------------------------------ Alexey Sonkin > -----Original Message----- > From: yasarakman@isne…
RE: informix session memory usage problem
Yasar, 'res-buff' is a database cache. I've never seen any memory leak in that pool. Memory leaks usually occur in 'V' segments - either 'global' or per-session pools ------------------------------------------ Alexey Sonkin > -----Original Message----- > From: yasarakman@isne…
Re: informix session memory usage problem
"Yasar Akman" <yasarakman@isnet.net.tr> wrote in message news:daa0f8b6.0404062206.46de2f2d@posting.google.com... > Alexey, > Thank you very much for you reply. > > "onstat -g mem" shows that the biggest pool is res-buff. > the details of the pool is: > > E2:/home/opera->onstat -g…
Re: informix session memory usage problem
Alexey, Thank you very much for you reply. "onstat -g mem" shows that the biggest pool is res-buff. the details of the pool is: E2:/home/opera->onstat -g mem res-buff IBM Informix Dynamic Server Version 9.40.FC2 -- On-Line (Prim) -- Up 1 days 13:33:39 -- 4096000 Kbytes Po…
RE: informix session memory usage problem
Yasar, Please, can You try to analyze the following: 1. Memory allocation by segment: onstat -g seg 2. Total memory allocation: onstat -g mem 3. If You find that some particular pool reported in (2) is very big, please, try to investigate it with onstat -g <pool name|session id>…
RE: informix session memory usage problem
Yasar, Please, can You try to analyze the following: 1. Memory allocation by segment: onstat -g seg 2. Total memory allocation: onstat -g mem 3. If You find that some particular pool reported in (2) is very big, please, try to investigate it with onstat -g <pool name|session id>…
RE: informix session memory usage problem
Yasar, Please, can You try to analyze the following: 1. Memory allocation by segment: onstat -g seg 2. Total memory allocation: onstat -g mem 3. If You find that some particular pool reported in (2) is very big, please, try to investigate it with onstat -g <pool name|session id>…
RE: informix session memory usage problem
Yasar, Please, can You try to analyze the following: 1. Memory allocation by segment: onstat -g seg 2. Total memory allocation: onstat -g mem 3. If You find that some particular pool reported in (2) is very big, please, try to investigate it with onstat -g <pool name|session id>…
RE: informix session memory usage problem
Yasar, Please, can You try to analyze the following: 1. Memory allocation by segment: onstat -g seg 2. Total memory allocation: onstat -g mem 3. If You find that some particular pool reported in (2) is very big, please, try to investigate it with onstat -g <pool name|session id>…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Excess V-segment allocation - who's responsible?
onstat -g mem will give you the session (first column) along with the address that can be related to onstat -g seg malc_p@btinternet. com (Malc P) To: informix-list@iiug.org Sent by: cc:…
Maximum Server connections
On Thu, 11 Mar 2004 06:16:39 -0500, Markus Bschorer wrote: > Hi all, > > we are a little bit confused concerning the NETTYPE-Parameter. The third > parameter is documented as being "the maximum number of concurrent users". > > What does that exactly mean? > > Currently our sett…
Shared memory and SELECT-Performance
Hi all, IDS 9.4 UC3 / RH 9 I have a performance-question: The quality of our application depends strongly on the execution-time of one single SQL-Select-Statement. Of course, the parameters in it's Where-Clause are different from time to time and from user to user, but we can u…
SHARED MEMORY LIMIT
Is posible to use with informix of 32 bits more than 2GB of shared memory in a Linux Machine? The base address in onconfig is: SHMBASE 0x41000000 Thanks in advance,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Shared memory problem
Platform : Win2000 / IDS 9.30.TC3 I get the following error when increasing the buffers. shmat [ENOMEM] [12]: out of available data space, check system MAXMEM shmdt: errno 22 mt_shm_init : can't create virtual segment. The server has 2 Gig of physical memory of which approx. 9…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
Shared memory problem???
Environment: RH Linux 7.1 Kernel 2.4.10-ac11 Informix IDS 9.21.UC4 Dual x86 Processor 1.5 GB Memory 8 temp dbspaces, 256MB each 100 full time users during the day My Informix shared memory parameters are as follows: LOCKS 2000 # Maximum number of locks BUFFERS 180000 # Maximum …
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: Shared memory. Error.
Hi. Make sure your permission of onstat and oninit like this. % ls -l $INFORMIXDIR/bin/onstat -rwxr-sr-x 1 informix informix % ls -l $INFORMIXDIR/bin/oninit -rwsr-sr-- 1 root informix I think oninit has wrong permisson. Regards. -- Tsutomu Ogiwara from Tokyo Japan. I…
RE: Shared memory. Error.
It looks like You are on Linux You can try to verify whether 'raw10' points to the correct block device: 'raw -q dev/raw/raw10' ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: inf [mailto:inf@terr.es]…
Re: Shared memory. Error.
Hi, Paul As you can see, the file /dev/raw/raw10 has the correct permissions: 0 crw-rw---- 1 informix informix 162, 10 ago 31 2002 raw10 but the error appears... Any suggestion ? "inf" <inf@terr.es> escribi� en el mensaje news:bor348$fgf$1@nsnmpen2-gest.nuria.telefonica…
Re: max number of connections
On Tue, 11 Nov 2003 12:42:00 -0500, Micha wrote: <SNIP>> We use both ontlitcp for remote connections and onipcshm for local > connections. NETTYPE is not defined in onconfig. How can nettype limit the > number of shared memory connections? AFAICT, the remote connections actually…
RE: Shared memory. Error.
You only can tell, that a link to a file has correct permissions, not a file itself Please, make 'ls -l /dev/raw/raw10' ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: inf [mailto:inf@terr.es] > Sent: …
Shared memory. Error.
Hi, - When starting informix the following error appears: 12:52:14 Informix Dynamic Server 2000 Initialized -- Shared Memory Initialized. 12:52:14 Physical Recovery Started. 12:52:14 The chunk '/home/informix/dbs/tempdbs' must have owner-ID "informix" a nd group-ID "root". 1…
Re: Problems with Shared Memory
U r limited to 50 connections in all ... if you are using SHM connections ... are the users spawning more than one connection to the engine when they run the program ... I would suggest increasing the number of connections to say 100 to see if it works or not ... onstat -g ses a…
RE: Problems with Shared Memory
Yes, -25588. $ finderr -25588 -25588 The appl process cannot connect to the database server server-name. But it's not true because some users are connected to. No ISAM-Error associated. TIA. -----Mensaje original----- De: owner-informix-list@iiug.org [mailto:owner-informix-li…
RE: Problems with Shared Memory
4 -----Mensaje original----- De: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org]En nombre de Obnoxio The Clown Enviado el: viernes 12 de septiembre de 2003 14:46 Para: informix-list@iiug.org Asunto: Re: Problems with Shared Memory Diego Morales wrote: > > >…
Problems with Shared Memory
I have problems with Shared Memory. Only 5 or 6 users can login at the same time at database using shared memory INFORMIXSERVER. All run ok changing them to tcp... but they are running a 4gl app and I want them throw INFORMIXSERVER shm. I check the sqlhosts and NETTYPE and I t…
Re: onstat says shared mem not init'd
I found out that the onstat works only for the administrator of the system. perhaps the user is not a member of the informix-group hth danny "Bill Hamilton" <bham@finsco.com> wrote in message news:bi5btk$1rh$1@terabinaries.xmission.com... > > GlacierWe recently installed IDS 7.…
onstat says shared mem not init'd
GlacierWe recently installed IDS 7.31TD2 on a customer's system. All works well, except that when one trys to use any utility, they say that shared memory is not initialized. I can even use dbaccess, but cannot even use onstat ! It was working, of course, but now it's broken. Wha…
Re: How can I tell what's eating my global memory pool?
squung@aol.com (Everett Mills) wrote in message news:<b53eea08.0308120717.47d798f3@posting.google.com>... Addenda: I just read this in another forum, sounds like the same problem... From: Alexey Sonkin [mailto:alexeis@grandvirtual.com] Sent: Thursday, August 14, 2003 12:42 PM To…
Severe memory leak in global pool: mgm_query
Hi, everybody, After taking a look at the size of memory pools (onstat -g mem) on our machine, I was shocked : it appeared, that the size of global pool is 138 MB!!! Informix Dynamic Server 2000 Version 9.21.UC4 -- On-Line (Prim) -- Up 22 days 14:11:09 -- 1790448 Kbytes Pool S…
AW: Severe memory leak in global pool: mgm_query
P.S. It seems that this problem doesn't reproduce with 9.40 ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: Alexey Sonkin > Sent: Thursday, August 14, 2003 12:17 PM > To: 'informix-list@iiug.org' > Subj…
Severe memory leak in global pool: mgm_query
Hi, everybody, After taking a look at the size of memory pools (onstat -g mem) on our machine, I was shocked : it appeared, that the size of global pool is 138 MB!!! Informix Dynamic Server 2000 Version 9.21.UC4 -- On-Line (Prim) -- Up 22 days 14:11:09 -- 1790448 Kbytes Po…
not initializing shared memory
mt_shm_remove: WARNING: may not have removed all/correct segments what do you do about that?…
How can I tell what's eating my global memory pool?
Guys- We have a pair of (supposed to be) identical IDS servers running in two of our plants. They have similar software, identical hardware, etc. They are both running IDS 7.31.FD4 on HP-UX 11.0. The less busy one, however has a global memory pool that grows until it chews…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Re: Mapping a session to an allocation of virtual memory
Zev, Onstat does not query any system tables (I assume you are talking of tables in the sysmaster database). It's the other way round. When you query a sysmaster table, online treats this as a special case and returns information directly from the appropriate shared memory struc…
Re: Mapping a session to an allocation of virtual memory
Thank You Michael. That is what I needed. I didn't gather the output last time but now I know what to do. BTW would you know the system table(s) onstat -g mem is querying? Thank You, Zev Berezin IBM Informix DBA On 30 Jul 2003, at 8:40, Michael Mueller wrote: > Use "onstat -g …
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
Shared memory: permission denied.
Hi all, Informix Dynamic Server Version 9.40.FC1 I receice the error Shared memory: permission denied when I run onstat - and this is the output of ipcs Message Queues: T ID KEY MODE OWNER GROUP q 0 0x4190051c --rw------- root system Sh…
Re: Shared Memory Problems, Informix IDS 7.31 install on SCO UnixWare 7.1.1
Thanks for all of your help. I lowered the amount of initialy reqquested shared memory and things seem to be working fine. Thanks, John M…
virtual shared memory segment
hello, this is our output from onstat -g seg : Segment Summary: id key addr size ovhd class blkused blkfree 7680 1381386241 80000000 592850944 245712 R* 144714 25 (shared) 1381386241 a3563000 201334784 6760 V 49154 0 46597 13…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
Shared mem connections and semaphores
no - busy waits and spin waits are not associated with kernel semaphores. "Tim Bragg" <braggtim@pentama To: ids@iiug.org tion.com> cc: Sent by: Subject: Shared mem connections and semaphores [976] forum.subscriber@ iiug.org 04/23/2003 08:45 AM Please help me to interpret the o…
mt_shm_init: can't create resident segment
----LNX_Wed_Apr_16_2003_08:39:34_V3.33-- Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable >Datum: 2003.04.15 21:51:00 >Sender: Zablatzky, .... <wzablatz@ubspw.com> > >First try issuing onmode -ky. Even if the server is down, this sometim…
Re. Shared Memory Parameters
Hi Everyone, Which file needs to be changed on AIX 5.1(9.3 UC3) for memory parameters, is it "/etc/system" but it does not exist on unix box. SHMTOTAL is set to 0 in ONCONFIG, but the total memeory does not exceed 2GB although we have 4GB of ram, could not find any info. Any id…
Side Effects of Setting Tables Memory Resident
Dave Thacker wrote in message ... >In an effort to cut down on disk I/0, I have set 8 of our most heavily used >tables to memory resident. The checkpoints have gone through the roof. I >was averaging 1-3 seconds and am now stuck at 8-9, with spikes to 15. >Checkpoint interval …
msg during start up of memory and shmem
Hello all, I have a question about a msg in online.log during start up. My shvirtsize is 491520 and onstat - reports memory allocation of 1,292,456. The hp-ux 11.00 shmmax is 1.6 gig and maxtsize_64 (code space) is 1.6 gig. I would think I have enough mem allocated in unix a…
EMERGENCY: Logs attached
EMERGENCY: I have a down system. I am trying to to a cold restore using command "ontape -r". The command keeps failing after prompting to back up the logs. The only error message which appears on the screen is : "oninit: Fatal error in shared memory creation". Additional error me…
linux kernel 2.4 + informix
HI ? I must setting Linux and IIF200 on DELL PowerEdge 6400 server . that server has 6Gbyes main memory, 120Gbyes hard disk. first i have install Redhat 6.2 official. and i have upgraded kernel 2.4 from kernel 2.2.16 . ( because for awaring 6Gbyes main memory at Linux) l…
RE: Problem with memory allocation
Yes, it is. The virtual pool is used for internal tables, session data, thread data, stored procedures caching, sorting. -----Original Message----- From: Aboobacker V V [mailto:aboo@syd-co.au.dhl.com] Sent: Thursday, January 04, 2001 5:20 PM To: John Carlson Cc: informix-list@i…
Re: Problem with memory allocation
John, Thanks for this, Can you please tell me what is this global pool, Is that the pool used for sorting and indexing. Aboo John Carlson wrote: > See comments below . . . . > > -----Original Message----- > From: Aboobacker V V [mailto:aboo@syd-co.au.dhl.com] > Sent: Wednesda…
RE: Problem with memory allocation
It looks like you're running into KAIO problem (bug). Tell us about your environment. Vivek Chaudhary -----Original Message----- From: Aboobacker V V [mailto:aboo@syd-co.au.dhl.com] Sent: Wednesday, January 03, 2001 6:10 PM Cc: informix-…
RE: Problem with memory allocation
See comments below . . . . -----Original Message----- From: Aboobacker V V [mailto:aboo@syd-co.au.dhl.com] Sent: Wednesday, January 03, 2001 6:10 PM Cc: informix-list@iiug.org Subject: Problem with memory allocatation Hi All, Can anybody please help me with the memory segments…
Shared Memory
Hi all, I need help on how to identify what process and users trying to allocate more shared memory segments (onstat -g seg) ? and how to releases this memory segment (virtual portion) ? TQ…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
SHMAT error
Oncheck allocates a shared memory segment for sorting memory. If your kernel's shared memory parameters are too small you can get that error. Art S. Kagel "Sinha, Niraj" wrote: > > Folks, > I get following error while running oncheck comand. > I knwo that it is UNIXsystem erro…
questions onstat -g
Is this a trick question? Type onstat -g at the prompt and you will be presented with the options and descriptions of each. Of course there are so many options, pipe it to a page break, i.e. | pg or | more. Is that the answer you are a looking for? Or how about this? (I don't k…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Informix 7.31 and Windows2000
Somebody has installed it on Windows 2000 ? The Instance Manager can't initialize shared memory.. Thanks in advance. -=SIMO=-…
SCO IPC
OK - I've RTFMed, but still in need of help. I am running SCO Unix 5.0.{245}, with Informix IDS.2000 Dynamic Server. Trying to initialize shared memory does not appear to work. The system utility "ipcs" does not report any shared memory being allocated, and the oninit -i seems…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Fatal error in shared memory creation
When I type oninit, it said: Fatal error in shared memory creation Why ? Thanks…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Shared Memory segment (5 of them)
Hi gurus, Recently, I noticed 5 extra shared memory segments created in my Informix 7.30 UC7. What could have caused this and how to remove/prevent these segments from created again? AFAIK, more shared memory segments means less efficient shared memory usage. Am I right? Thank …
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
GLS memory pool growing
I'm using 7.31 UC4 on HP-UX 10.20. I observed a constantly growing amount of shared memory on my IDS server When I look at the memory pools (onstat -g mem) I see that the GLS memory pool is constantly growing and consumes about 80 % of the whole shared memory. Did anybody else …
Re: oninit -v
From: "Stefansson" <bs@rhi.hi.is> > >oninit -v >returns an error: >Allocating and attaching to shared memory...FAILED >onint: Fatal error in shared memory creation > >What can be causing this and what could be able to solve this problem ? It could be something holding on to shar…
oninit -v
oninit -v returns an error: Allocating and attaching to shared memory...FAILED onint: Fatal error in shared memory creation What can be causing this and what could be able to solve this problem ? Thanks. B. Stefansson…
Problems with RedHat Linux 6.0 and IDS 7.30
Hi, I'm novice in Linux and after installing the IDS 7.30 on a RedHat 6.0 machine when the IDS try to create the shared memory i got a list with messgaes like this: dupfd: fd 1025 max 1024 finally i got the message: error on shared memory creation. Where I can find information …
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
Informix 7.24UC8 performance
In article <01bf8489$a3ba1310$18e9b5a3@btruong>, "Ben Truong" <Ben.Truong@amd.com> wrote: > Folks, > > We have an active application running on Informix 7.24UC8. Our system is > an online system that runs 24 by 7 and we have about 2000 users at any > given time of the day. It…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
IIF2000 on Linux: Initializing ASF ...FAILED
I am trying to initialize the IIF2000 on my RedHat Linux and I receive this error: oninit: Fatal error in initializing ASF with 'ASF_INIT_DATA' flags; asfcode = '25507'. Can you help me? I tried to run oninit with a lot of verbosity. Here is the output: Checking group members…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
network down error
We have a new installation of 7.24.UC5X7 on an IBM S80 and when we get around 100 users connected new users cannot connect to the database. Onmonitor gives the error "Network Down". When you check shared memory with onstat it says that shared memory is not initialized but when yo…
RE: accessing shared memory
Hi John, You need to change permissions to shared mode (s) for necessary executables in $INFORMIXDIR/bin directory. thanks Ravi Yarlagadda Informix Certified Professional -----Original Message----- From: John Horton [mailto:john.horton@cognito.co.uk] Sent: Tuesday, December 14…
accessing shared memory
Hi How do I set up a user so that they can access shared memory (ie. they can use the onstat - command) . Currently only root can access shared memory (not even informix can access shared memory or use the onstat - command) I have tried stting up the group so that informix is a …
shared memory problems
Hi I am having some difficulty getting some programs to work on a linux box (they are being ported from an HP9000) The problem I am (currently) having is that one of the processes requires shared memory to be allocated. The program requests two loads of shared memory , the first …
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
onstat -g mem
Please where can i get some explanation about onstat -g mem…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
shared memory
Beim Start mit oninit erscheint folgende Fehlermeldung 21:00:20 shmget: [EEXIST][17]: key 52564801: shared memory already exists 21:00:20 mt_shm_init: can't create resident segment Was fehlt noch bei der Einstellung ? Wer kann mir helfen…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
RE: Fatal error in shared memory creation
Check the release notes for SHMBASE parameter value. Try to start Informix with SHMBASE value 0 -----Original Message----- From: Jerome BARRET [SMTP:jejgphy@hotmail.com] Sent: 06 ������, 1999 06:43 � To: informix-list@iiug.org Subject: Fatal error in shared memory creation…
Fatal error in shared memory creation
When I want to startup for the first time, in the oninit program, this message appears : "Fatal error in shared memory creation". In the part shared memory parameter, the parameter are the default parameters. Thank you for your help…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Dynamically allocated new shared memory segment ???!!!
Dear ALL : Our system appear the following messages in seconds : 09:11:02 dynamically allocated new shared memory segment (size 8388608) 09:11:30 dynamically allocated new shared memory segment (size 8388608) 09:11:50 dynamically allocated new shared memory segment (size 8…
Shared memory limits in 64-bit environment
Is there any practical shared memory limits in HP/UX 11 (N-serie) with 64-bit Informix ?. -Jukka…
Loading into Shared Memory...
Hi, Can i explicitly ask Informix to load a table into Shared-Memory? And then later on sync the copy of table on disk \\ with the one in shared memory? Any suggetions welcome Thanks Anand Sent via Deja.com http://www.deja.com/ Share what you know. Learn what you don't.…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
SCO: shared memory problem...
Hello, I am having a problem that, hopefully, one of you have had before, or have heard about before. There box is a PII system with 128MB RAM running SCO OpenServer 5.0.5 with the latest patches. The error oninit -v gives: oninit: Fatal error in shared memory creation The er…
error while creating online instance
While creating a new online instance using "oninit -ivy", this is the following error message that we get. Creating infos file "/usr/informix/etc/.infos.kil_serv3" ... succeeded Writing to infos file ... succeeded oninit: Fatal error in shared memory creation We have created in…
Shared Memory Size vs Physical Memory Size
Glynnie wrote in message <7kb1o2$kru$1@nnrp1.deja.com>... >Can somebody please explain the pros and cons of increasing either the >initial virtual memory segment or adding a further segment via "onmode - >a" on a machine that is Informix Dynamic Server dedicated. The rule of thu…
Usage of INFORMIXSHMBASE
It replaces, or supplants, the SHMBASE ONCONFIG file parameter's value. It is the preferred attached address for shared memory if you are using a shared memory connection. Art S. Kagel Wu wrote: > > What's the usage of this environment variable -> INFORMIXSHMBASE ? > > thanx…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Re: running out of Unix Shared memory segments
You may want to check how many shared memory segments are allocated to Informix and other programs; use the unix command "ipcs". If you normally have many Informix segments you could change the onconfig file parameters for SHMADD and the initial shared memory parameter to increa…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Shared Memory on Linux
How do I configure Redhat Linux to get rid of the Shared Memory Error when I try to start Informix (IDS 7.3)? Thanks. Aris…
how to caculate resident shared memory size?
hi,all could you tell me how to caculate resident shared memory size? thank you.…
Stored procedure pool in virtual memory
Does Informix 7.xx allocate memory dynamically to the stored procedure pool? How can I determine exactly how much memory the pool occupies? I know about PC_POOLSIZE and onstat -g prc, though not what all the output columns from latter represent. What does PC_HASHSIZE govern?…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Re: Connection pooling
I have the same problem. We have several CORBA objects which make database connections to Informix and the connections are supposed to last until the objects deactivate. All clients need to access data through these objects and the Virtual portion of shared memory grows. I am st…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
7.30.UC5 SOL 2.6 eats up memory
In article <36D7F298.DAEFAFEF@arcadia.de>, Frank Boehm <frank@arcadia.de> writes >Any help is appreciated. > >We are running 730UC5 on SOL26 and (on another machine) 730UC2 / SOL251. > >Both have the same databases running (more or less) and the same >requests (via java); >The UC…
Shared Memory
I have a question about the shared memory segments Informix adds dynamically in version 7.x. I use onmode -F to free the unused shared memory but this seems to only ever free up one segment regardless of how much is unused. Has anybody used this to free more than one segme…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix error.
Does anyone know what this error is about: shmat: [EINVAL][22]: shared memory base address illegal Thanks, Fred Lee…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Re: onstat -g dic question
andy lennard wrote: > > An aside to this. On Solaris 2.6, 7.23.UC4 we had a problem with loads > of 'dirty' flags caused by 'update table' statements. 7.30.UC3 seems to > have it fixed. > The dictionary rose from the default 310 entries to 1088, and > onstat -g mem gave dictpool …
Re: onstat -g dic question
An aside to this. On Solaris 2.6, 7.23.UC4 we had a problem with loads of 'dirty' flags caused by 'update table' statements. 7.30.UC3 seems to have it fixed. The dictionary rose from the default 310 entries to 1088, and onstat -g mem gave dictpool as 386Mb after 30 days. > Can't…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Server Crash
We're running Online 7.11 on HP UX 9.01 and my server just crashed with the following errors listed in the log: 10:37:06 dynamically allocated new shared memory segment (size 2097152) 10:37:16 Pool = 0xc084c010, Pool name = mt, Blkhdr = 0xc0fb5040 10:37:16 Block magic is -15…
Shared Memory ??
--------------F10AFCC198D69640B04B5FAB Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello! I just installed the Informix OnLine Workgroup Server 7.20 in Sun Sparc 5 with solaris 2.5.1, but when I try to run some utilities (e.g. onspaces, oninit) it…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
Re: onstat -g ses
>Hi, >In the onstat -g ses output , what is the basis for allocation of 'total >memory' ? >There is also the figure 'used memory' , why not just allocate required >memory ? Well, we could do that but then that would 1) fragment memory and 2) create bottlenecks. Memory in shared…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: oninit looping
>I have seen a few messages regarding oninit taking up lots of cpu and doing >very little i/o. > >I am on an HP-UX10.20 running Online 7.23.UC4. I have been seeing the same >situation but cannot find the culprit. However at the same time online is >dynamically adding shared memor…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: dbservername/dbserveraliases/nettype
"Scott Kolaya" <skolay1@nycap.rr.com> offerred: +>BTW be careful to not use the same port for shared memory and tcp in +>the sqlhosts on the server > +>Art S. Kagel +We've been using the same port for shared memory and tcp for a year now in +production. Yes, shared memory connec…
shared memory
This is a multi-part message in MIME format. --------------F12A58D21005157C74BAD832 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit hello; how do i go about initalizing shared memory for informix 7.2 on a sun? --------------F12A58D21005157C74BAD8…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Re: Informix 7.22 Online under AIX 4.1 ERRORS !!!!!
>> shmat: [EINVAL][22]:shared memory base adress illegal >> using 0xd0000000, needs 0xffffffff >> >From onconfig : >SHMBASE 0x30000000 c Shared memory base address PMFJI, but isn't this the important one? The machine specific release notes detail the correct share…
Re: DB 7.21 (HP-UX 10.20) hangs while backup
if RESIDENT is set to 1 the shared memory used by informix will not be swapped to disk by UNIX if UNIX needs more memory. It's generally not a good idea to set to 1 if you're having problems or you're limited on memory. Scott Kolaya…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
online workgroup server 7.22 on NT Server CLI probs
I'm running online workgroup server 7.22 on NT server 4 with service pack 3. I cant however get ilogin to work. I get the 406 error. Do I need to do anthing with shared memory before this will work? How does shared memory work with NT? email to ag@roninsrv.demon.co.uk Thanks, …
Re: JDBC
Ben wrote: >Has anyone gotten JDBC to work with servlets for informix? I have >gotten it to work directly from the UNIX prompt, but whenever I try to >connect more than once to a shared memory connection server, I get >errors about shared memory. When I try to connect to tli, …
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
-123 ISAM error : no shared memory ... TOP URGENT !!!!!
How to solve Shared Memory can't attach error in AIX 3.X ... Error Message was appeared after run dbaccess ... -529 Cannot attach to shared memory -123 ISAM error : no shared memory. Please send me a solution : brianip@magician.com.hk…
can't attach shared memory , TOP URGENT !!!
How to solve Shared Memory can't attach error in AIX 3.X ... Error Message was appeared after run dbaccess ... -529 Cannot attach to shared memory -123 ISAM error : no shared memory.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
Re: HELP! IUS crashes during level 0 dump
In article <19980114025900.VAA02644@ladder02.news.aol.com>, SaTriGuy <satriguy@aol.com> writes > >A couple of other "onmode -f" commands that might come in useful. > >0x1 - run a check on all memory pools with each memory allocation -- This is >really slow. > >0x8 - check the g…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
Re: memory pools
bala peddi wrote: > Could Any one Please explain me the memory Pools section of > onstat -g ses 12378 > Is this the normal in informix > INFORMIX-OnLine Version 7.23.UC2 -- On-Line -- Up 13 days 18:11:16 -- > 416472 Kbytes > session #RSAM …
memory pools
Could Any one Please explain me the memory Pools section of onstat -g ses 12378 Is this the normal in informix INFORMIX-OnLine Version 7.23.UC2 -- On-Line -- Up 13 days 18:11:16 -- 416472 Kbytes session #RSAM total used id use…
memory pools of onstat -g ses
Could Any one Please explain me the memmory Polls section of onstat -g ses 12378 Is this the normal in informix INFORMIX-OnLine Version 7.23.UC2 -- On-Line -- Up 13 days 18:11:16 -- 416472 Kbytes session #RSAM total used id us…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: memory
Thuc Nguyen wrote: > > Hi > > I am running Online 7.23 on HP 10.20 > > We want to find out why we allocate alot of memory per user and never > release it. > > Is that memory leak? Actually you are probably not allocating any memory "per user". If your default connection, or the…
Re: Informix crashing UNIX on HP
In article <611s01$f56@cssun.mathcs.emory.edu>, Silvester_Valiente@tnt.com.au writes >I had never heard of this problem before on HP. We have been running >7.20 - 7.22 >for over a year with as many as 10 x 8 Mb extents at one time (ie >during heavy load). > >Unfortunately there …
Re: Informix crashing UNIX on HP
Silvester_Valiente writes: > I had never heard of this problem before on HP. We have been running > 7.20 - 7.22 > for over a year with as many as 10 x 8 Mb extents at one time (ie > during heavy load). See my previous posting on this. With HP/UX, >3 shared memory segs per proc…
Re: Informix crashing UNIX on HP
I had never heard of this problem before on HP. We have been running 7.20 - 7.22 for over a year with as many as 10 x 8 Mb extents at one time (ie during heavy load). Unfortunately there is no messages in the message log. Unix panics and crashes On the system console we get a …
Re: Informix Online 5.0 and Solaris 2.5
>"Shared memory not initailzed" does (necessarily) imply a problem with >the UNIX server's shared memory; This first line should have read ".... does not (necessarily imply a problem ...." Also, I've checked my release files and your shared memory settings seem fine. Neil Trub…
Re: memory
In article <5v76b7$pg0@cssun.mathcs.emory.edu>, Thuc Nguyen <thucn@email.utcourts.gov> writes >I looked at the log file of Online 7.23 running on HP 10.20 > >What does "dynamically allocated new shared memory segment" mean? >and how can I resolve that problem? > > >14:57:23 Chec…
memory
I looked at the log file of Online 7.23 running on HP 10.20 What does "dynamically allocated new shared memory segment" mean? and how can I resolve that problem? 14:57:23 Checkpoint Completed: duration was 2 seconds. 14:57:43 dynamically allocated new shared memory segment …
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Shared Virtual Memory Usage Question
We have a nice, simple two tier application, with a Powerbuilder based client connecting to a V7.13 engine. New connections start out using very little memory (virtual pool I think) as reported by "onstat -g ses". Then over time it increases, some getting as high at 20+ megab…
Re: Shared Memory allocation error
<SNIP> > I am having a problem with online ver 7.10.UD1 running on AIX 4.1.4.0. > When I run a query on a view that joins many tables online begins > allocating additional shared memory until it hits an illegal address. <SNIP> > SHMVIRTSIZE 8000 # initial virtual…
Shared Memory allocation error
All: I am having a problem with online ver 7.10.UD1 running on AIX 4.1.4.0. When I run a query on a view that joins many tables online begins allocating additional shared memory until it hits an illegal address. At this time the query hangs but the engine stays up. If anyone c…
Re: Block magic 4114
You don't say which version of 7 you are on. We got messages like this with version 7.12, but when we upgraded to 7.13 they disappeared. Peter Wages wrote: > 4:36:32 Checkpoint Completed: duration was 2 seconds. > 14:37:56 Pool = 0xc2b1b010, Pool name = mt, Blkhdr = 0xc32c8…
Re: Block magic 4114
Peter Wages wrote: > 4:36:32 Checkpoint Completed: duration was 2 seconds. > 14:37:56 Pool = 0xc2b1b010, Pool name = mt, Blkhdr = 0xc32c85e0 > 14:37:56 Block magic is -4114 (BL_MAGIC_FREE), expecting 4 > 14:37:56 Memory block possibly freed twice > 14:37:56 mtshpool.c, lin…
Block magic 4114
One of our servers ( instances ) has suddenly started coming down quite often with the following message. 4:36:32 Checkpoint Completed: duration was 2 seconds. 14:37:56 Pool = 0xc2b1b010, Pool name = mt, Blkhdr = 0xc32c85e0 14:37:56 Block magic is -4114 (BL_MAGIC_FRE…
HP/Raid5/Performance Lessons
If you are running or wish to run with Raid on HP here are some things that we recently ran in to. Machine Configuration: HP-UX 9.04, 6 cpu's, 1.6 gig mem, 32 gig raid (MTI), 600+ users some shm and some tcp, Infx 7.11 uc1, around a 30 gig database Initially our informix insta…
Shared memory
My director told me that Digital dialed into our Unix box (AT&T running Informix 5.05) and saw that every sqlturbo is getting 5000 pages of memory. Does anyone know if this set in the tbconfig file? I can't find any information about this. If I can reduce this, it may benefit …
Shared Virtual Memory Question/Engine Shutdown
Our project site recently received a binary executable from a sister site which updated approximately 5000 stored procedures. The executable brought down the engine due to shared memory limitations. When looking at the data (onconfig, memory on machine, etc. as stated below), t…
Re: shmdt: errno = 22
Double check the shared memory parameters Informix suggests for 7.12 for your kernel. Good Luck, Arun…
Re: HELP I'm in crisis
You need to avoid dynamic shared memory segments on HP at all costs. If your SHMVERTSIZE is 60000, I would suspect that would be enough. However, if your application is leaving a lot of open statements (i.e. not issueing a FREE on a prepared statement or CURSOR) then each user t…
Re: Informix 7.13 "eating" memory
In article <32844747.22509345@www.weideneder.de>, Stefan Weideneder <stefan@www.weideneder.de> writes > >What I know is, that Informix has two different memory management >routines in the OnLine Server. The one which manages the virtual >portion ( 8KB blocks ) and another one for…
Re: Informix 7.13 "eating" memory
Uhps, I didn't see the loop inside your test program. Could you please place the "onstat -g ses ###" immediately after the "select instit.." statement, and print the different memory pools ? I think it's not neccessary to print all 10,000 reports, just the first 5 outputs. Stef…
Shared memory
I guess i missed some previous discussion about shared memory problems. I'll appreciatesome info about the followinfg error message: "Cannot attach shared memmory" from the Rapid Developement System, Informix 4GL V4.10 under AIX. Ramiro Rela.…
Re: initializing shared memory
} From: Gene Terry Sanford <tsanford@csti-md.com> } Subject: initializing shared memory } } We are runnning informix 4.1 on SCO OpenSever 5.02. } When we run tbinit to initialize shared memory we get } the following error: } } tbinit: shmat[EINVAL][22]: shared memory base addres…
initializing shared memory
We are runnning informix 4.1 on SCO OpenSever 5.02. When we run tbinit to initialize shared memory we get the following error: tbinit: shmat[EINVAL][22]: shared memory base address illegal using 0x80480000, needs 0x80000000 tbinit: fatal error in shared memory creation. Our…
Re: Shared Memory Not released
>Brian Li <cphdcbl@ted.cs.depaul.edu> wrote in article ><511nel$aft@shrike.depaul.edu>... >> >> Dear Informix experts, >> >> We are currently have Informix Dynamic Online running on our HP T500 >machine >> and recently have shared memory problem which is only known to be solved …
>1 Virtual Shared Memory Segment slow down
I've been told by Informix that having >1 virtual shared memory segment slows down your Informix Online Database server. Informix normally has 3 share memory segments 1 Fixed size 'Resident' shared memory segment for disk cache etc. 1 Fixed size 'Message' shared…
SHARED MEMORY
Hi All When doing kernel performance tuning for a Informix 5.0 system with 512MB memory and 50GB disk, should the the shared memory be included into the kernel parameter tuning or excluded. Watching the memory use with 'cpqmon' it appears that these calculations should be done …
SHARED MEMORY
Hi All When doing kernel performance tuning for a Informix 5.0 system with 512MB memory and 50GB disk, should the the shared memory be included into the kernel parameter tuning or excluded. Watching the memory use with 'cpqmon' it appears that these calculations should be done …
Re: SHARED MEMORY
At 12:36 PM 6/19/96 -0700, Paul Middleton wrote: >When doing kernel performance tuning for a Informix 5.0 system with 512MB >memory and 50GB disk, should the the shared memory be included into the >kernel parameter tuning or excluded. > >Watching the memory use with 'cpqmon' it a…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: 7.x performance issue on DEC Alpha
tolly brumbelow <tolly.brumbelow@bridge.bst.bls.com> writes: > Are you running the same application on both Alpha 1 and Alpha 2 ? >Have you checked to see if swapping is taking place on the unix side? >(if so you may have the buffers set to high) >Are you running update stats on…
Re: mt.shmpool PANIC
Mickey Mestel (mickey.mestel@etak.com) wrote: : it helps to post a little background info, to even say that you don't : know what specifically was going on when this happened if this was the case. Version and platform could be very helpful, too. : : > -------------------------…
mt.shmpool PANIC
Dear all, does anybody have any experiences with something like below, please ? Thank You. Yours Rasto -------------------------------------------------------------------------- 17:40:40 Pool = 0x18fe020, Pool name = 1070, Blkhdr = 0x19c9d40 17:40:40 Block magic is 107…
Re: Loading tables in Shared Memory
peeyush wrote: > > Hi, > > I need to know how to load some of the frequently used tables (like master > reference tables which are accessed very frequently) into SHARED MEMORY. By > loading them into shared memory, they permanently reside there until they > are unloaded, and the …
Re: Loading tables in Shared Memory
peeyush (peeyush@toj.com) wrote: : Hi, : I need to know how to load some of the frequently used tables (like master : reference tables which are accessed very frequently) into SHARED MEMORY. By : loading them into shared memory, they permanently reside there until they : are unl…
Re: 'ralloc' in onstat -g output
Manoj Samel (manoj@green.baan.nl) wrote: : What does the component 'ralloc' indicates in onstat -g ses < session id > output ? : For what purpose is this memory used ? : This is Informix-Online 7.20 : Thanks for any help : Manoj : (manoj@baan.nl) It's the name of a memory poo…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Re: OnLine shared memory question
>From: res@din.lois.perm.su (Igor G. Popov) >Subject: OnLine shared memory question >Date: Fri, 28 Oct 94 16:55:07 +0600 >X-Informix-List-Id: <news.9512> >When I attempt to increase BUFFERS value in tbconfig, >initializing fail and print message: >tbinit: shmat[EINV…
Re: Online and Shared memory
ywleung@ouray.denver.colorado.edu (YIU WAH LEUNG) writes: >I went into a theoretical discussion with my workmate on how Informix handles >shared memory that is defined by using tbmonitor/Parameter/Shared memory. >He said that the size of the shared memory that defined in Informi…