Oninit® Archive
Results for “ENABLE_SNAPSHOT_COPY”
Not enough room in ROOT DBspace
It looks like your physical log is taking up most of your space. I would imagine that this was moved and grown in your other instance. Dan -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of STEVEN AB Sent: Wednesday, January 04, 201…
Re: Senior Oracle DBA now Learning Informix by Request
Obnoxio The Clown wrote: > DA Morgan said: > >> Best selling (may be the result of) Best quality. > > Well, as a theoretical possibility, sure. But give me five examples of > where the market leader is demonstrably and unequivocally also the best > quality. > >> How one defines q…
deleting rows physical
Art S. Kagel wrote: > > goermet wrote: > > > > I had think so, but it isn't so in the reality > > > > goermet > > > > WF Software schrieb in Nachricht ... > > >In article <76oegi$pci$1@news.online.de>, goermet@online.de (online) > > >wrote: > > > > > >> I have following problem: …
Created raw table in Perl program but it vanished when I exit program
Greetings y'all. This is a big mystery for me and I hope there are enough users of the Perl DBI::Informix module to recognize this problem. Consider this code in a Perl variable: create raw table $wtab_name as select date(ins_dtime) ins_date, hex(rowid) row_address from $target_t…
DRDA redirection to HDR primary
Hi Andreas. Not so! We have used groups that way as long as I can remember. For example: https://www.ibm.com/docs/en/informix-servers/14.10.0?topic=cshac-properties-connecting-high-availability-cluster-servers-through-sqlhost-file-group-entries It's the same for other APIs that u…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Odd restore failure
Hi Art, any clue from comparing rootdbs's and this my_blob's "DBspace archive status" in oncheck -pr, specifically Logical Log Unique Id + Position? With a true whole system backup (which ontape would do anyway, and I think ifxclone too, and which is the precondition for restore …
Ifx 14.10xc8 - ISAM error: operation illegal on a DR Secondary
Oh ... you probably meant 'oninit -rv' ? Don't do it this way, use 'oninit -PHY' instead (and add -v if you like), and of course do the scp only with the primary server either down or blocked (onmode -c block). But since you're transmitting the chunks anyway, why not using either…
Replication of Informix
Koonjul It's because your last excerpt from the Message Log contained... Primary : 02:49:30 rolling upgrade Invalid Level 15 12 02:49:30 rolling upgrade version mismatch ol_norwaysoc HDR Secondary : 02:49:29 rolling upgrade Invalid Level 12 15 02:49:29 rolling upgrade version mis…
start onbar and ontape simultaneously
Hi, Yes ontape and onbar (and ifxclone) use the same threads to read the used pages from the instance so cannot be used at the same time. Regards, David. ------------------------------ David Williams ------------------------------…
restore through STDIO
Hey David Correct, ifxclone will not clean up after itself. It's a given that there will be an element of manual intervention once ifxclone has completed its work. I think DBSERVERALIASES is also unset, but don't quote me on that. The sqlhosts file will need attention as well. --…
Documentation - Upgrade from IDS 12 to 14 in primary/HDR/RSS configuration
More or less, nothing has changed. A couple of comments and answers to your questions: You can in v14.10 upgrade an hdr or rss secondary by a single minor version without a restore. Going from 12.10 to 14.10 requires that the secondaries be restored from the primary. The page you…
HDR shutdown and Restart
Amit Another aside to bear in mind is that when you've patched the Primary node and brought it back online, don't leave it too long to patch the Secondary node and reestablish HDR connectivity. What you can not afford is for the Logical Logs on the Primary node to wrap around as …
HDR
Hi Amit, on_nebula21 has to be aware of connection details of on_nebula31 and vice versa, so first of all you need to add on_nebula31's sqlhosts line to on_nebula21's sqlhosts file and also the other way round - how else could a connection be established from one to the other? Th…
DIRECT_IO/KAIO
RAW devices use KAIO Cooked chunks use DIRECT_IO ensuring KAIO is enabled at the kernel layer. If you have a HDR setup and have used ifxclone to build your Secondaries, be aware that ifxclone will disable DIRECT_IO on the Secondary and you will need to go and cleanup after ifxclo…
ontape error
My bad, the bug is logical corruption after restart with encryption and SSL active with server create with ifxclone…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
configure sds with raw device
Hello Alexandre, Thank you for your reply. As you mentioned, we will only use the SDS node for failover purposes. And now the storage used by Informix is only made up of raw devices and it is difficult to migrate to the cluster file system. We also do not have a license for so…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Moving entire database from on server to another
Just add enough logical logs for the transaction to fit and import with dbimport -l Did you try ifxclone ? Marcus Haarmann Von: "JOAQUIN GARRIDO ESPINOSA" <jgarrido.espinosa@gmail.com> An: "ids" <ids@iiug.org> Gesendet: Dienstag, 10. April 2018 13:41:13 Betreff: Moving entire d…
dbimport/dbexport
Hi Lester. I would suggest you to separare this into two steps: 1) do your box migration first. This could be easily done with you actual machine running (via ifxclone, or even using ER). 2) After sync is complete, you can stop both boxes, and proceed to the in place upgrade of …
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
HDR scenarios
1. How to take dbexport backup whit the HDR pair with no down time. This was been discussed before: http://members.iiug.org/forums/ids/index.cgi/read/21903 In short, I would not use dbexport: use ontape or onbar with PSM which do not require downtime. 2. How to manually restar…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Re: stopping ifxclone
I am facing the same problem. Currently I am running a 12.10.FC5 instance on a Linux 64 bits platform. Did you manage to solve the problem? Thanks a lot for your help.…
ISSUE regarding IFXCLONE
Hello, After running ifxclone for more than 10 hours and being conscient that nothing was happening (just rootdbs and physical log dbspace were noted in the message log saying that physical restore was done, data dbspace had initied the physical restore but not yet done), (the in…
Can you resize a dbspace?
Just shutdown the fiture secondary then use ontape, onbar, or ifxclone to restore a copy of the primary to the secondary. Art On Apr 24, 2017 16:10, "BENJI LONG" <ruggedmouse@hotmail.com> wrote: > Oh, I didn't realize that. So will it still work with what I have or do I > need…
STDIO Parameter
You can also use the ifxclone utility for a very simplified way to create a secondary! Art Art S. Kagel, President and Principal Consultant ASK Database Management www.askdbmgt.com Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions…
ids from 11.50 to 11.70
I see you got this done but for future reference there are IBM docs on this subject to help you, e.g.: https://www.ibm.com/support/knowledgecenter/SSGU8G_11.70.0/com.ibm.mig.doc/ids_m ig_015.htm http://www.ibm.com/support/knowledgecenter/SSGU8G_11.70.0/com.ibm.mig.doc/ids_mi g_27…
Upgrading to Informix 12.10.FC6 with HDR
Option #2: Upgrade the primary and restore the secondary from archive (or using ifxclone). Art Art S. Kagel, President and Principal Consultant ASK Database Management www.askdbmgt.com Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opin…
Switching HDR / Primary
Hello. I would also use the steps suggested by Art Kagel, in case of manual failover. Please be aware that 11.70.xC8 (your next release) has several APARs related to high availability features, so I would also recommend you to check them first, possibly avoiding any cluster mal…
RSS INSTALLATION
Hi, I have choose to work with ifxclone to mount an RSS server on a large archive database, but it did not work, in deed the clone has happened correctly I have duplicate the database with the ifxclone utility and on than the primary I runed: onmode -d add RSS sec_server and on …
dbexport on RSS Secondary
Im running IDS 12.10.FC6 on SLES 11 SP 4 with a primary and RSS secondary on separate boxes. At http://www.oninit.com/presentations/v117.pdf I see the following: Enhancements To Dbschema, Dbexport & Dbimport It is now possible to use the dbschema and dbimport utilities on all …
Data loading quesiton
the customer will run the read only application on HDR, so reinitilize the HDR is not workable , the read data is about 60TB, ifxclone take about 9 hours.…
HDR/RSS establish fails
IDS 11.70FC7 on RedHat 5 We've built a new instance. At some point, 4 days ago, its chunks were renamed with an external restore. Fast forward to today. A clone of the instance has been created with a blocking checkpoint. onbar -r -e -p onmode -d secondary <primary server name…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
instance copy
For the last migration to new hardware I simply setup the target as an HDR secondary , and eventually flipped primary/secondary. It worked fine although it was across slow small pipes so the initial archive push took ~30 hours. The logical log syncing was very fast even when ther…
Migrate 11.7 Informix database to an other server
Answers: 1 - Copying storage to initialize a secondary server: You can do this, but only if the copy us made under an external back up condition which is initiated on the source server with onmode -c block. While the server is blocked copy the chunks to the target server (or to …
new features about dynamic parameter added in 12.1
Attention, this is not documented. For Informix 12.10, another way you can get the list is to use the cf_flags column on syscfgtab to determine which onconfig parameters are dynamic: SELECT cf_name FROM sysmaster:syscfgtab WHERE bitand(cf_flags,'0x1') = 0 --removes Unsupported p…
stopping ifxclone
Hi, We are running Informix 11.70.FC7. We started ifxclone to re-setup an RSS server, though we had to stop the RSS server in the middle of the clone. We used onmode -ky to stop the RSS server. However when we try to restart ifxclone again, we get the following error message on …
Informix temp spaces
Hi Vladimir, If you have RSS servers: For HDR, RSS, and SDS secondary servers in a high-availability cluster, logical logging on temporary tables should always be disabled by setting the TEMPTAB_NOLOG configuration parameter to 1. So, you can remove last 4 temporary dbspaces w…
Copy database
Should do, although as per Art the source database, be it the Primary or an RSS/HDR, would have to be offline for the duration of the copy. Have you considered ifxclone for this? It's pretty cool and can be run against a running source.…
ifxclone
ids 12.10.fc3 Aix 7.1 When the ifxclone command is used to make a snapshot of a database, is the snapshot as of the time the utility starts, or will database modifications during the executing ifxclone be applied. Just needing to double check. So, for example if the ifxclone is…
ifxclone
Never used this, but one of my boys suggested it for the establishment of a long-distance RSS where we knew it would take many, many hours, but needed to keep onbar logical log backups running on the Primary. IDS 11.70FC7 and FC8 on SuSE Linux. What are your experiences? What …
Re: Informix 12.10 snapshot [34292]
Georgi, yes that is possible. I did it for a couple of customers with older informix versions and EMC disk arrays over 10 years ago. You might need to have some considerations depending on your chunks names and other things but it is doable. I am not sure what you meant with y…
Informix 12.10 snapshot
Hi all, I want to ask is it possible to use SAN snapshot functionality to clone my Informix 12.10 server? I want to make clone of my server every night and to have "fresh" copy of the instance in the morning on 2 other instances - one on same host and one to another host for back…
RSS not working
Why not just use ifxclone? I may have missed an older version number or something but isn't that essentially what you're doing just in a long form? That will create the RSS server connections and everything for you. Run the clone while tailing the online.log grepping for (I'm goi…
Informix on HP MoonShot
When HP announced its new ARM32 and ARM64 based Moonshot micro-server yesterday there was only one commercial database that already supported the platform: IBM Informix. Today there still is only one. Imagine running your relational or JSON collection database on a server built …
Informix/Oracle
I think it's clear that these are just made up reasons that might work on less clued-up customers or ones who favour Oracle in any case. It's FUD. A quick google found this roadmap presentation for VNext+ and VNext++. http://www.informix.nu/pagang/Informix_v12_1_Highlights-RoadM…
ifxclone Question
Good Morning Folks, IDS 11.70.FC7W3X9 AIX 6.1 This may seem a bit long winded but if you have ifxclone knowledge or experience please read on. Recently I clones a rather large instance (approx. 1.5 Tb) for the purpose of doing some performance tuning. I used 4 threads to pull …
Re: Upgrading IDS version on PRI need rebuilt HDR/
Khan: It is documented in the Administrator's Guide and probably mentioned in the Installation Guide, haven't look for a while. Not so much a limit as a requirement. When you start up a server and it recognizes that the disk image was created with an earlier version of Informix …
upgrading 11.70 to 12.10
================================================================================ == ================================================================================ == Link - http://www.ibm.com/developerworks/data/library/techarticle/dm-1304overview/ Migration to Informix 12.10 …
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
HDR setup informix 12.1
Did you restore server #2 using ontape -p or onbar -p from an archive taking from server #1? You cannot set up HDR between independent servers. The secondary has to be a clone restored from the primary using only a physical restore (no logical logs and no fast recovery). Here ar…
can we have to hdr servers ?
Strictly speaking the answer is "no". You can have ONE hdr server and several RSS servers. RSS or remote secondary servers act much like HDR secondaries, but they were design to work in a more "detached" mode. And you can have more than one of these. They appeared in v11.10. So …
Prolem Adding Chunks
We're running Informix v 11.70.FC6 on AIX 6.1 boxes with a primary an HDR pair and an RSS pair. Any time I go to add space we get errors about sending the command to one of the pairs(it changes from time to time for no apparent rhyme or reason). I create the links on all 3 then r…
Reading informix backup from tape drive
Two good options: 1) Use the primary's tape drive remotely, 2) use ifxclone to restore the secondary directly from the primary live. Ifxclone is documented in the Administrator's Reference Manual. Art Art S. Kagel, Principal Consultant Advanced DataTools (www.advancedatatools.…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Ifxclone issue
Hi, A big thanks to Mr Madison Pruet for developing IFXCLONE utility. I have been using this for over a year now and it works fine on most occassions. Only issue I see is after the RSS is built, the Primary fails to respond to all ONMODE commands. My IDS version is 11.70.FC5X7 …
ifxclone in parellel???
Hi Folks; IDS 11.70.FC7 Ultimate Edition AIX 6.1 I am working on an issue from home so have none of my class material available however I "thought" I remembered that ifxclone could work in parallel. I have it working but it is restoring in a serial mode. Can someone please poin…
Onunload and onload
ifxclone is another option. command syntax: ifxclone --source=<production server> --sourceIP=<production server ip address> --sourcePort=<production server port number> --target=<test server name> --targetIP=<test server ip address> --targetPort=<test server port number> --useLo…
redundant connection manager configuration using H
I'm looking specifically at a MACH11 cluster. So then, if I was to just make things simple and do this: SLA cm_sla1 DBSERVERS=(RSS,primary,HDR) Then the HQ connection manager would realize that the RSS is high latency and avoid giving it out, and the remote site connection man…
Performance Tuning Discussion
Ok it seems you have a big hardware, what´s your Informix version? What´s your box architecture? For performance tips, there is a good article in Andrew Ford´s blog, that should clarify your thoughts.... http://www.informix-dba.com/p/informix-innovator-c-tuning-basics.html This…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
ifxclone
I'm trying to do some testing with ifxclone but can't seem to get it to work. I've tried everything I can think of with it and I'm stuck. I can't get it to work correctly. ifxclone -L -T -S source -I source.IP -P 8785 -t target -i target.IP -p 8587 -d RSS Restoring clone server…
Re: ifxclone
Hi Laurie, Data changes that occur during the clone process are not copied. When you start the new ER node, it should sync up the replicates. Not sure on the final disposition of the replicates. You may need to try it, but I don't think it does what you want. I think when serv…
ifxclone
Question about cloning servers. If ifxclone is used while the primary server is online... with the --disposition=ER option, Will it replicate data that is added to the primary during the cloning process? If replicates are defined on the primary server, with no additional part…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
Using ifxclone to setup HDR
Hi, I am trying to use ifxclone to setup the secondary. I am using IDS 11.70 FC5 on solaris x86 Below is my command which I run on target (dba2), while dba1 is source ifxclone -T -S dba1 -I 10.58.17.49 -P 50200 -t dba2 -i 10.58.17.50 -p 1591 Please note, I am using ontlitcp …
ifxclone
I finally got my grid and CDR setup to work (with a little help from you guys) and then decided I'd try making it easier by using ifxclone...now I can't get that to work :/...I've created the files for the spaces that the source has on the target. I've created the sqlhosts and on…
What are best onconfig parameters for a DSS app
Frank.... first question: Is your database installation being made for a production system???? Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
multi-threaded ifxclone?
I remember Madison saying at the IIUG conf last year that ifxclone is essentially an onbar process. I was wondering if it was possible to multi-thread it the same way we can with onbar. I tried setting BAR_MAX_BACKUP to 4, but it's still restoring 1 dbspace at a time. I can't fin…
RE: IDS 11.70.FC4 - two questions: encrypted backu
Larry: The utils4_ak package is just a set of sample AWK scripts you can use or modify to create SQL or shell scripts to perform operations on an entire database by post processing the output from dbschema or myschema (from utils2_ak). Once you build dbcopy it prints its own us…
HDR & RSS
Hi and thanks for your answer. Does ifxclone utility exists in IDS 11.10? Thanks sszago…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
ifxclone in IDS 11.7 support Cross Platforms?
Hi All, The database I am handling is due for migration from Solaris to AIX. But the problem is, it's a production database and the downtime we can have is minimal. So, dbexport/dbimport might not be feasible in my case. I was reading thru 11.7 documentation and stumbled upon t…
Snapshot Backup
We are wrestling with SAN level backup strategies now. Our next platform: HP-UX 11.iv3 IDS 11.5 I want transaction level strategy for offsite disaster recovery, but 'management' thinks it costs too much. They are leaning towards SAN copies. Check me out here... To synthesize t…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Art's Fear the Panther....
You probably noticed that Art Kagel posted a new entry in his blog: http://informix-myview.blogspot.com/2010/10/fear-panther.html At the end he mentions that IIUG is preparing the vNext survey (!). The world never stops! He wrote: "The IIUG will soon be posting its new Featur…
Concurrent Database Maintenance?
OK..more questions! Informix on Linux. I read on one site that Informix does not allow concurrent index reorgs...that you have to drop table indexes and rebuilt them (ALTER INDEX CLUSTER). I dont know if it was an outdated website. Can anyone tell me if this is still true and …
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Re: in place alters (script/output) issue
??? not according to the migration guide when doing an in place migration Upgrading Dynamic Server (In-place Migration) In-place migration upgrades Dynamic Server directly to the current version by installing the product in a new directory, copying a few configuration files, an…
RE: IBM Informix - Continuous Availability White Paper
> Date: Wed, 21 Apr 2010 00:32:08 -0400 > From: lester@advancedatatools.com > To: informix-list@iiug.org; waiug-members@iiug.org > Subject: IBM Informix - Continuous Availability White Paper > > IBM Informix - Continuous Availability White Paper > LOL... Now that's funny. For …
IDS, BTS datablade and HDR
I am not sure which version of the server you are using, but if you check the release notes of 11.50.xC3 or later you will find the following: Basic Text Search DataBlade=AE module Supports High-Availability Cluste= rs =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
Shared Disk Secondary
Look at the whitepaper from HP (http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA1-7936ENW.pdf) which discusses the rich high availability features of IDS 11.1 and how to integrate them with the cluster solution HP ServiceGuard and a cluster filesystem.…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
HA : What is the best ?
Hi, I have two Intel Xeon 5160 rack boxes (2 x Dual-Core, 4GB Ram, 5 HD, 2 LAN ports) to run Win2K3 Server on which I plan to install IDS 11.50 xC2.xx for about 60 users. Considerations I have to address : High Availability, IDS license type/cost, "near-zero" IDS administration…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Hardware advice please
"R Rhodes" <rosie@bullysoft.co.uk> wrote in message news:299485d5-551f-48a9-bb5d-edcd02a0d3c7@x35g2000hsb.googlegroups.com... > Hi all, > I am looking for advice on what servers to buy to replace our existing > informix db servers. > We have to replace them, because they are dino…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Managing IDS in IBM HACMP environment
Appreciate the comments. We are planning to use HDR but this will be to our Disaster Recovery Site. The use of HACMP at the Primary site is mainly to have high availability in case of any hardware failure and for system maintenance.The cluster is already setup and shared logical…
Re: question about mach11 capabilities
Thanks Art, I figured it had to be ER, but wasn't sure how it would work. So basically I would have to reorg each ER server ( or er group ) separately and let it catch back up. Lots of work on a weekend type reorg, but at least no downtime. :-)) Thanks. ----- Original Message …
Re: question about mach11 capabilities
Floyd Wellershaus wrote: > Hi, > I was just reading the white paper on ids11 availability and have a > question. > The solutions seem explicitly cover every scenario except one. > If I need to reorg a very large table that the application needs, but > I don't want to take any out…
Re: current informix white papers ?
Fernando Nunes wrote: > DA Morgan wrote: > >> Floyd Wellershaus wrote: >> >>> My company is seriously thinking of going to Oracle and using >>> RAC/DataGuard for their high availability solution. >>> I know Informix can compete with this, as I'm pretty sure Cheetah has >>> the la…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Getting a bite of the Apple?
http://www.internetnews.com/bus-news/article.php/3721921 IBM's IDS to Support Mac Platform By Larry Barrett Maybe it's just a cat thing. IBM on Wednesday announced its Informix Dynamic Server (IDS) will support the Mac OS X 10.5 operating system, a.k.a. 'Leopard' beginning wit…
Getting a bite of the Apple?
http://www.internetnews.com/bus-news/article.php/3721921 IBM's IDS to Support Mac Platform By Larry Barrett Maybe it's just a cat thing. IBM on Wednesday announced its Informix Dynamic Server (IDS) will support the Mac OS X 10.5 operating system, a.k.a. 'Leopard' beginning wit…
Informix Cluster HDR and Hearbeat2
OK, here you go with anold e-mail from 31-Aug-2007: ----------------------------------------------------------------- Sending on behalf of Lars D. Forseth (lars@forseth.de): ----------------------------------------------------------------- Hi there! My name is Lars Daniel Forse…
Re: RAC in Informix by year end?
Data Cruncher wrote: > Taken from DBTA magazine. > > Did I read this correctly? Does it mean that by year end Informix > will offer RAC. > > ============================================= > HDR, RSS and SDS servers and even ER can be combined in any way to > provide a sophisticate…
Re: RAC in Informix by year end?
Data Cruncher wrote: > Taken from DBTA magazine. > > Did I read this correctly? Does it mean that by year end Informix > will offer RAC. > > ============================================= > HDR, RSS and SDS servers and even ER can be combined in any way to > provide a sophisticate…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: Informix beats Oracle
Excellent!! Thanks Andrew. Andrew Ford wrote: > IDS HDR has auto failover via the DRAUTO onconfig parameter: > > 0 signifies OFF = Do not automatically switch the server type in the HDR > environment. > > 1 signifies RETAIN_TYPE = Automatically switch secondary to standard duri…
Re: Informix beats Oracle
Tool wrote: > Quick question for you Fernando or anyone else... > > With the introduction of MACH11, do you still need a secondary product > for HA > such as HP Serviceguard, or Red Hat Cluster Manager or other HA product > on the > machine at the OS level if there are no other a…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
IDS agent for Sun HA cluster
> We've installed IDS on a Sun Cluster. It works really well, but one > irritation is we haven't got the Informix agent to work. We've followed > through the instructions in the IBM IDS High Availability and Sun Cluster > 3.x document (written for IDS v9 but we are assured 10 i…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Using IDS on VMware
DAVID FRASER said: > Actually, the more I think about it, we need on-line realtime data server > and > 4gl (and linux environement) replication, not High Availability fail-over > (as > provided by HDR). So I am looking for a solution based on VMware to > replicate > my entire ser…
HDR vs. SRDF
We currently use the SRDF to take a snapshot of the database 3 times a day during the online day. In the SRDF script we start the copies once they complete we issue a "onmode -c block" then break the mirror and issue a "onmode -c unblock" the whole process of the break leaves the…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Re: Database market share 2004
rkusenet wrote: > http://www.eweek.com/article2/0,1759,1820667,00.asp > > > > > The database market grew by 10.3 percent in 2004, fueled largely by hunger for business > intelligence and analytics, according to numbers released by the Gartner Group on Monday. > With 34.1 percent …
Database market share 2004
http://www.eweek.com/article2/0,1759,1820667,00.asp The database market grew by 10.3 percent in 2004, fueled largely by hunger for business intelligence and analytics, according to numbers released by the Gartner Group on Monday. With 34.1 percent of the overall market, IBM hold…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Sun Cluster Agent for INFX version 10
Informix Sun Cluster agent is tested/certified with 9.X and 10.X ( SC 3.X) Regards, Mahesh Dashora Development Manager (Backup Restore, High Availability and Utilities) Database Development Information Management Division 4100 Bohannon Drive Menlo Park, CA - 94025 email: maheshd@…
RE: HA cluster on SCO Open Server
Martin Bouzek wrote >>> > >>> our company needs to setup an high availability cluster on two > >>>machines running SCO Open Server and Informix. Does > anybody have any > >>>experience with such configuration or at least can anybody > point me > >>>where to find more informatio…
Re: HA cluster on SCO Open Server
Obnoxio The Chav wrote: > Martin Bouzek said: > >>Hello all, >> >> our company needs to setup an high availability cluster on >>two machines running SCO Open Server and Informix. Does anybody have >>any experience with such configuration or at least can anybody point me >>where t…
HA cluster on SCO Open Server
Hello all, our company needs to setup an high availability cluster on two machines running SCO Open Server and Informix. Does anybody have any experience with such configuration or at least can anybody point me where to find more information about supported HW minimal versions …
Re: HA cluster on SCO Open Server
Martin Bouzek said: > Hello all, > > our company needs to setup an high availability cluster on > two machines running SCO Open Server and Informix. Does anybody have > any experience with such configuration or at least can anybody point me > where to find more information about…
cluster
hi all, is this possible to build a cluster with 2 informix (IDS 9.x) DB (load balancing,high availability..)? what must i look at ?…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: can run HDR and ER simultaneously on the same server IDS 9.20??
Another solution would be to migrate databases to a mainframe (we have thought at IBM ZSeries) and to use a storage IBM (storage are own OS for replication) at main location and also another mainframe with storage at disaster recovery center. In this case we have thought to use t…
RE: IBM website Informix pages / Workgroup edition
I received this from IBM in February this year in response to a similar question on licensing: "...IDS 9.3 & 9.4 High Availability/Failover In idle standby or active standby, you must acquire the correct number of Server, Processor and Concurrent Session use authorizatio…
RE: IBM website Informix pages / Workgroup edition
comments in-line. "Everett Mills" <eemills@nationalbeef.com> wrote in message news:ce6d1r$j09$1@news.xmission.com... > > Isn't this contradictory? From IBM's site (reference below): > > One area: > > Informix Dynamic Server V9.4 Workgroup Edition features and attributes > includ…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
RE: HDR with Synchronous replication
Guys- FYI- HDR is now LEGAL in WGE. You just have to buy an additional server license for your secondary ($686 last time I looked). From the IBM website: Informix Dynamic Server V9.4 Workgroup Edition features and attributes include: High availability Point-in-time instance…
Re: database market share 2003
Everything is up for grabs Daniel, that's what newsgroups are all about. If you understand the Informix world, you'll understand my statement, especially in the context of the Informix newsgroup. Informix people have had several servers to choose from over the years, but no one…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: The old raw devices chestnut.
Andrew, Fair enough considerations, and you hit the point on the head, the backup and restore. We have always set up backup of logs and data to a real backup, but considering all the options I might 'need' in the event of system failure, or migration, or cloning, raw devices ar…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: Company thought DB2 will be better than Oracle.
The issue of transparent reroute of the connection when the IP address gets moved is something we are working on (i.e. writing code to solve). Ian wrote: > Noons wrote: > >> Blair Adamache <badamache@2muchspam.yahoo.com> wrote in message >> news:<bk7qnv$igs$1@hanover.torolab.ib…
Re: Company thought DB2 will be better than Oracle.
Blair Adamache <badamache@2muchspam.yahoo.com> wrote in message news:<bk7qnv$igs$1@hanover.torolab.ibm.com>... > For more formal approaches, DB2 supports High Availability through the > following packages / methods: > > HACMP on AIX > Microsoft Cluster server on Windows > Sun Clu…
Re: Company thought DB2 will be better than Oracle.
We are certainly looking at and protoythe high availability through replication (HDR) technology we acquired with Informix. We also appreciate that xferring the ip address in some transparent way is desirable. DB2 also supports split/mirror: http://www7b.boulder.ibm.com/dmdd/lib…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
Re: IDS on HACMP
This is a multi-part message in MIME format. --------------55F7CC0E714E518848B71DB6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit HI, I know of a site that has this setup. How it was configured was we had a mirror copy of informix installed (includi…
IDS on HACMP
Hi, Currently I'm handling IDS 7.3 on R/S 6000 F50 machine. My company want to upgrade the system for the purpose of availability. Therefore they wanted to implement High Availability Clustering Multi Processor (HACMP) meaning that they will put another server that will share th…
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: High-Availability For Informix
From: Don Ignacio <dignacio@openratings.com> > >Anybody out there can suggest some high-availability solutions using >Informix. >Something like an automatic switch over. Really, about the easiest and most robust way of doing this is to use HDR. ER is a lot of work (even if it is…
Re: High-Availability For Informix
Hi, We are currently using IDS 9.2 on a Sun E45000. In this Informix version they removed the DRAUTO configuration parameter, which basically tells the secondary server what to do in case the primary server fails. This parameter is existing in 7.x. The easiest way to overcome t…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
RE: Cluster with informix.
I agree -- I don't think a cluster is really worth it. We have a very critical app. running on a small HP K460 box (2 Gb memory, 70 Gb disk, 4 CPU), connected via HDR to a similarly-configured K400 box. The two boxes are several hundred miles apart, and yet replication to the s…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
Issue with query path chosen by Informix 7.20 UC2 optimizer ***Help*** :*(
We're running Informix OnLine 7.20 UC2 in an HP-UX 10.10 environment and one of our more simplistic two table join queries seems to be being mis-optimized. The query is listed below: SELECT * FROM product_vendor, product WHERE prod_upc_num = pdvn_upc_num …
How to choose a DB
Tim Schaefer wrote: > > Mark, > > My comments below... > [Snip} Tim - we have had this conversation before. > You can use Informix's 4GL or whatever to link to the engine, and the > engine takes care of the details of bringing back the query. 'Bringing back the query' - it's i…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Extents
> I need to expand the extents for most or all of our tables in our db. What > would be the best way to go about this? > > The only obvious idea I have for now is to do a dbexport, edit the output to > reflect larger extents, drop all tables and then do a dbimport? Yes, definite…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Re: Largest Informix Database size
David Williams wrote: > Of course you could probably scale further if you have the hardware, > if 176 is possible I wonder what the limit is, Tim? > > David Williams David, XPS is unlimited in a cluster context, but limited on each coserver in the same context as a typical…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Informix Database Administrator
If your looking to advance your career and work for a dynamic company....look no furthur. We have a client in the South Jersey area (10 minutes north of Cherry Hill) with an immediate opening for an Informix DBA to work in their Information Technology Department. They are seeki…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Re: How to reduce SE .dat & .idx file sizes?
In article <353F881E.15476F01@fullcompass.com>, Alan W. Jurgensen <alan@fullcompass.com> writes >hiya, > >we're running informix SE version 7.X on AIX RS/6000. I have some >development databases I want to trim the DB file sizes down on... >deleteing old records does nothing to r…
How to reduce SE .dat & .idx file sizes?
hiya, we're running informix SE version 7.X on AIX RS/6000. I have some development databases I want to trim the DB file sizes down on... deleteing old records does nothing to reduce the file sizes... I've read in the Faq: 6.8 Space reclamation In the good old days of SE, a t…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
PRESS:RECORD-BREAKING ONE TERABYTE TPC-D BENCHMARK UNDERSCORES
RECORD-BREAKING ONE TERABYTE TPC-D BENCHMARK UNDERSCORES INFORMIX'S LEADING-EDGE DATA WAREHOUSING SOLUTIONS Informix/Sun Microsystems Demonstrate Ongoing Industry Leadership, Competitive Pricing for Performance-critical Business Solutions MENLO PARK, Calif. (FEBRUARY 25, 1998) …
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
PARALLEL Processing Connection, January meeting notice
January 12th ... Boris Klots starts off the new year with a detailed description of the Oracle relational database system. This important application can be used in an exclusive or shared mode, i.e. one or multiple Oracle instances, respectively. The shared mode allows concurrent…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
ODS in Sun HA environment
Greetings, We are looking at installing ODS 7.23 on a High Availability system using Sun's HA software running Solaris 2.5. The cluster has two Sun Ultra 3000's with disk farm's attached to each server. One of the servers is used as the primary DB server and in case of failure…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Re: Informix and Clustering
Informix and NCR have some special cooperative solutions to this used successfully by several customers. There was even a setion on this at the reasent user conference that your local Informix office may be able to get information on for you. NilsL@simac.nl (Nils van der Laan) w…
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Informix vs. Sybase vs. Oracle vs. (gasp) MS SQL Server
In article <5j6eju$h25@omni2.voicenet.com>, gray@voicenet.com (Scott Gray) wrote: > > In article <33538a45.29051694@news.jax.mindspring.com>, > Reid Fleming <RFleming@aol.com> wrote: > >Dave Raddatz <raddatz@austin.ibm.com> wrote: > > > >>Steve Phelan wrote: > >> > >>I think La…
Re: free up disk space
Wendy, The answer to your question, depends on the use of the table. What I mean is that the "Create cluster" or "Alter index to cluster" statements will rebuild the table, compacting all rows and freeing disk space taken up by deleted rows while the table is still active and a…
Re: Indexes and Stored Commands/Procedures
Sammers, It is always good to re-index periodically, because that will remove all the holes in the pages and also update the statistics page(clustered index only). In some cases the holes in the pages could also aid in good performance because the server does'nt have to do frequ…
Re: SCO not recommended for high number of users.
jparker@boi.hp.com (Jack Parker) wrote: :> :> > My point here is that the current numbers *seem* to show better :> > results - substantially better - than most medium sized risc based :> > Unix servers, including the K-series from HP. Currently it's simply :> > an interesting ob…
Re: SCO not recommended for high number of users.
Nils Myklebust (Nils.Myklebust@ccmail.telemax.no) wrote: : jparker@hpbs3645.boi.hp.com (Jack Parker) wrote: : Jack, the following isn't written so much to disagrea with you as : to give others in the group some new information. You may have noticed that I'm very reluctantly dra…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
PRESS: INFORMIX SUPPORTS DIGITAL TRUCLUSTERS 64-BIT SOLUTIONS
INFORMIX SUPPORTS DIGITAL TRUCLUSTERS 64-BIT SOLUTIONS MENLO PARK, Calif., (April 17, 1996) -- Informix Software, Inc. (NASDAQ:IFMX), the leading provider of innovative database technology, today announced its support of Digital Equipment Corporations new UNIX TruCluster Solutio…
Tips on a highly available & scalable dbms needed
We are trying to select a relational database that will have the following properties: - Windows NT compatible: use native NT threads, and not be just a Unix-port to NT. Plus all of the product (tools, APIs, etc.) must function in the NT environment. - Scalable: up to 100 milli…
PRESS - INFORMIX INTRODUCES ONLINE EXTENDED PARALLEL SERVER
INFORMIX INTRODUCES ONLINE EXTENDED PARALLEL SERVER Industry-Leading Dynamic Scalable Architecture Extended to Clustered SMP and MPP Environments New Parallel Server and Best-in-Class Partnerships Offer Today's Most Powerful Data Warehousing Solution SAN JOSE, Calif., (July 18…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
ANNOUNCE [ODBC Router for Mac/NT]
FOR IMMEDIATE RELEASE Contact: Thomas Gray AUGUST SOFTWARE CORPORATION 23232 Peralta Drive. Suite 202 Laguna Hills, California USA 92653-1437 Telephone (714) 454-9007 x443 Fax (714) 454-9032 North-American FAXBACK Service (714) 454-9007 x411 AppleLink CompuServe…
PRESS Development Platforms To Include AT&T Global Information Solutions and IBM Massively Parallel Solutions
Informix to Deliver Parallel Technology for Loosely Coupled Clusters and Massively Parallel Systems Development Platforms To Include AT&T Global Information Solutions and IBM Massively Parallel Solutions Commercial Parallel Processing Conference, Chicago, Ill. (Sept. 12, 1994)…