Oninit® Archive
Results for “SDS_PAGING”
Not enough room in ROOT DBspace
It looks like your physical log is taking up most of your space. I would imagine that this was moved and grown in your other instance. Dan -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of STEVEN AB Sent: Wednesday, January 04, 201…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
restore through STDIO
Hello. Unless you are trying to create an RSS node on your cluster, I don't see any benefits in using zip/unzip. 1-huge cpu consumption in a serialized method. 2-your network link should be already a high speed to accomodate your primary load for HDR replication. 3-if you are dea…
Potentially Serious HDR Bug 14.10.FC7W1
I'm still running into this issue -- it's been at least five times now -- and this time, the primary does show the secondary as being disconnected. Behavior is the same as before; HDR disconnects from primary; primary tries to run a checkpoint, waits for HDR to acknowledge, but s…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
configure sds with raw device
Hello all, I am looking for advice on how to configure Informix SDS. We are using Informix 12.10.FC10 Workgroup and are running on AIX 7.1. No Informix secondary server or cluster software is configured. And DBSPACE consists of raw device, not cook device (file system). I woul…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Upgrade 11.70 to 12.10
Hi. We are running 11.70.FC8W1 on Linux in a Primary / SDS config. Everything works well. Now I'm planning to upgrade to the newest 12.10.FC10. I've been testing the upgrade process (on a restored instance without SDS) and we have run our application and everything seems to be O…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
RSS does not apply logs
hello, I have the following situation. I would be very pleased if somebody could put a light into this. Thanks a lot, JUAN Primary: amc1_rss RSS server: amc4_rss RSS DeLAY_APPLY 5M Why does RSS secondary not apply logs up to 116024, having long past the 5 minutes delay config…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Secondary stuck in Fast Recovery
Can you provide the exact message? From the message then yes you would need to restore the secondary as well as they are no longer considered in-sync. NOTE: The backup writes to the reserved pages (Archive pages) as seen with onstat -g arc. What does onstat - onstat -g arc g…
Re: New RFE
No need to create a logged copy. Just put the pages of the table into the log, just as we do with index page logging. The only down side is that the table would have to be locked during that time and the conversion to standard would be considerably longer. Sent from Yahoo Mail f…
Re: New RFE
Madison: I submit option #4: 4) On converting the table to standard, begin a logged copy of the table to a new table replicating the copy, then reapply any log records recorded by changes to the original table, finally rename the tables and drop the original version. Done this…
Re: New RFE
I had played around with doing this for ER as well so that we could include it with the GRID automatic replication. It might actually be in the product if you are connected to the grid when you convert the table from RAW to STANDARD. Now for the technical issue. The copy of the…
Implementing HDR on Windows 2012 R2 Servers
Hello Friends, Need A Help on Immediate basis. We are implementing HDR(High Availability Data Replication) on Windows 2012 R2 Server. Steps done: 1) Two new Windows 2012 R2 Servers. IDS 12.10FC8 installed and created the instance manually using Server Instance Manager. Serve…
HDR Implementaion
I have already done with that commands. so that the primary server is in (prim) and secondary is in (sec) Primary server o/p: [root@cgslhdr9 storage]# onstat -g dri IBM Informix Dynamic Server Version 12.10.FC8AEE -- On-Line (Prim) -- Up 02:56:43 -- 180852 Kbytes Data Replica…
Can you resize a dbspace?
On the secondary you can run "onstat -D" and see which chunks have already been written out. The restore restores one dbspaces at a time in dbsnum order writting to all chunks in each dbspace before moving on to the next dbspace. So, you can tell how far the restore has progresse…
Shared Disk Secondary
Is it possible to avoid a SDS-Server shuts down when the Primary is stopped and restarted? TIA Reinhard.…
sds transactions
I don't understand sds secondary isolation in transactions I'm making some test and I'm a bit confused, perhaps something is not well set: --Primary create table kk(k char(1)); begin work; insert into kk values (2); --Secondary select * from kk --> 2 --- --dirty read?; I keep …
updatable SDS
IBM Informix Dynamic Server Version 12.10.FC6X5 -- Updatable (SDS) -- Up 03:46:16 -- 1950676 Kbytes I'm testing things before releasing the first SDS server, and I'm finding thing I didn't expect: I create a lock in Primary: begin work; delete from kk where 1 =1; Updatable SDS…
Compress Repack Slow Performance
Dear All, Have an instance of Informix 11.7.FC4 that runs on AIX PowerHA Cluster, IBM POWER machines, with 64 logical cores, 160GB or RAM memory and FC storage. Have a total of 600GB of chunks, containing few big tables within 1 DB (100GB (100mil records), 70GB, 50GB) fragmented…
dbexport on RSS Secondary
Hello, James. Try using onmode -wm instead. Onmode -wf only changes the onconfig values, according to the official page: https://www.ibm.com/support/knowledgecenter/en/SSGU8G_12.1.0/com.ibm.adref.doc/i ds_adr_0439.htm It should work. Best regards. Atenciosamente, Alexandre Ma…
Primary + SDS cluster failvoer through cm
Is there a way to tell the connection manager to try to start a node that is down? I dont mean the "turn the sds to new primary y old primary is down" that already does it, I mean a "try to start the primary that failed as an sds node of the new primary you just started". I don…
SDS Replication and VMware VMFS
Hello, Ihac who wants to implement SDS replication using two Vmware Linux virtual machines. Does VMFS support SDS replication? Thanks a lot for your answers. JOHN.…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
Block vs. RAW
Thanks Art. Unfortunately, I can't use a filesystem (except maybe gvfs) because this will be an SDS instance. EXTx filesystems are not safe to be mounted by two servers at the same time (or so I'm being told). I think I will try to config this using RAW and see if I see any dif…
Setting up SDS cluster
HP-UX B.11.31 IDS 11.70.FC8W1 Setnet 4.10.TC5 Hi All When I start the connection manager and try to connect from a Ilogin I get a -908 error. I have checked the port setting on both client and server match but still get this error. Any advice will be appreciated. thnx…
RSS server is not active / Can not establish RSS -
Hello all, I followed and have completed all the steps for setting "back", an RSS server with IDS 11.50.FC9 on AIX 6.1. When I issue onmode -d RSS ol_live (Primary) on the backup server, instance log shows : " 13:04:09 DR: Secondary to Secondary 13:04:09 DR: new type = RSS 13:0…
Shared file system
Does it still applies when I set up an updateable SDS server ?…
Unable to bind to the port
Hi, Informix 11.7.FC8 HP-UX 11.31 I am setting up an SDS server. The primary starts successfully but when I run the oninit command on a SDS server I get the following error: "Assert Warning: Unable to bind to the port (9999) on the host (999.99.9.99) for the server (primary)."…
Replication HDR : "insert" are very very very slow
Understand that an updatable secondary server doesn't actually update anything! It just allows you to enter data modification SQL when connected to it. The secondary then passes the SQL to the primary which actually performs the update/insert/delete operations sending the logical…
HA Checkpoint Trigger
The physical logging performed on the primary is not necessarily going = to be the same as it is on the secondary. A common reason for this is the= creation of an index. Consider that the primary may be doing a checkpoint as the index is bei= ng created during the final phase o…
RSS not working
The only reason that I can think of that might have caused this is if t= he network connection between the primary and the secondary was down for a= n extended period of time and a log wrap occurred. From: "CLAYTON DAIGLE" <cjdaigle2@hotmail.com> To: ids@iiug.org Date: 10/09/201…
Re: HDR error in secondary server
Hi, Well something is a bit odd on the target server storage root chunk. The assertion failure file shows two I/Os - one that caused the bfput error and then one for all the I/O. So, you should get two identical pages back - you don't! page 000000009da71000: 00000000 010046da …
SDS Shutdown
Hi, We are running Informix 11.70.FC7. I am doing some testing with SDS. I noticed that if I shutdown the primary, the SDS stays up. Though when I bring up the Primary again, it automatically shuts down the SDS. This happens even if I just quickly bounce the primary. Why does th…
Changes dbspace path without having to drop & re-a
Hi, you cannot set up a HDR secondary with different chunk layout. The server will not accept this. The reason is that a primary instance of a HDR pair has to add a chunk and the secondary will do this on the other side in the same way (the same path has to exist). Maybe you ca…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Using Informix ODBC with connection manager
Hello. As soon as you implement your CM, it will be a "network gateway" for your production cluster (and maybe redirect your connections to any cluster node, according to your CM defined policy). So, your ODBC connection will be changed from your database, to your CM hostname/p…
Nasty, unexpected cluster problem
We have a MACH11 cluster defined. It has an SDS Primary, an SDS secondary, and 2 RSSs. The SLA is defined thus: CLUSTER gcgob1_db LOCAL SLA Connections Service/Protocol Rule ob1_oltp_1 234463 ob1_oltp/onsoctcp DBSERVERS=primary ob1_obbo_1 0 ob1_obbo/onsoctcp DBSERVERS=SDS,primar…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Strange HDR behaviour
I am using 'onmode -ky' to shut it down. I restarted the secondary server this morning and it starts to transfer logical logs again from number 1411. Current log at the primary is 1575. Here is the log from the primary: 05:05:51 DR: Primary server connected 05:05:51 DR: Using …
Logical Log File not found ..
Original post: You are right on Money JACQUES :), I wanted to update the Reserved Pages details as well .. But instead I opted to keep it open for everyone to by their own understanding and to cross check if I m on right right. The problem here is with Reserved Pages. <stuff …
database replication setup help
Art, You say "If the RSS or HDR secondary is writable, the writes are still happening on the primary" and then later "If the WAN goes down you could continue to process transactions locally". I'm confused by this - if all writes are happening on the primary, then how could I con…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Some strategy to resize logical-logs in HDR
ALEXANDRE Admin Guide Chapter 20 : " *Managing the Logical Log* The size of the logical log must be the same on both database servers. You can add or drop a logical-log file with the onparams utility, as described in Chapter 14, Managing Logical-Log Files, on page 14-1. Dynami…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
SQL/Optimizer Question
Just eyeballing the schema provided I am guessing you will get 16 rows per 2KB data page. assumed row size of 120 bytes. WHERE i_case_relation_cd = 3 is currently evaluated to return 98,108 rows while we do not have the statistics on the table, the cluster value would indicate h…
HDR and ER Running Together
Madison Thanks for this explanation, it makes logical sense and ties in with what I see occasionally. However I got the following errors a couple of days ago: Primary: 13:40:25 DR: Cannot connect to secondary server 13:40:36 DR: Primary server connected 13:40:36 DR: Send error 1…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
HDR - Alarmprogram when down
Our HDR is up and running onstat -g dry all looks good. Then it drops and on the primary server log we get this. 12:35:00 Maximum server connections 62 12:35:00 Checkpoint Statistics - Avg. Txn Block Time 0.000, # Txns blocked 0, Plog used 200, Llog used 236 12:38:35 DR: Send e…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
HDR question once again
Jack: You are missing a lot. A bit of recent history then. Informix from version 7.10 through 7.31 and 9.10 through version 10.00, supported two overall replication types: 1. HDR or High availability Data Replication - This supported one read/write primary server and one read-…
new OS Migration with SDS
Hello, we have to change our OS from Solaris to Linux RedHat. Which is the best way to do it, prefered with a limited downtime. We have two Solaris Systems with a Shared Disk. Is it possible to use a third RedHar Node, so we can make this system later to the primary DB Server? t…
Informix Clustered Indexes
On Tue, Jan 31, 2012 at 07:53, Tom Lehr <tomcaml@gmail.com> wrote: > Have been doing some reading about clustered indexing and wondering > what experiences other folks have had with them? > We currently do not use them in our high transaction OLTP world and am > a bit wary due t…
Connection Manager
I have setup an RSS server but I am having problems getting it working properly with Connection Manager. Here is what I am running. IDS 11.70.FC4GE CSDK 3.70.FC4DE ServerA - Primary server ServerB - SDS ServerC - RSS The connection Manager config file is - NAME conn_man LOG 2…
execute dbimport in SDS node
Hi, In V11.7, if I run the dbimport in the SDS node? dbimport will create a non-logged database default,could I use the default method to run it? or I need to specify the buffered or unbuffed option. thanks for your time.…
transaction survial in 11.7
Hi, If I use transaction survial feture, when the primary failed, where the flying-in transaction in the SDS being stored? thanks for your time.…
SDS - AIX
Hi, We will set up a new machine and would like to keep things already prepared to activate an SDS in the future. AIX 6.1 , Storage IBM DS4700. Using VG / LV raw devices. As far I remember , on Linux, we need to configure the VG (or LV... not sure) to active shared access. (t…
DBSPACETEMP IN SDS CLUSTER
I have a Cluster SDS, secondary server is setup as UPDATABLE_SECONDARY 1 my application is connected through CM, When an user is connected to Secondary Server i recived. -229 Could not open or create a temporary file. -131 ISAM error: no free disk space. I checked "onstat -d" a…
HDR & RSS
Hi I have 'installed' primary [ol_xxxx] & an RSS [ol_xxxx02] IDS servers. I was successfully established [add the RSS server] The following 2 lines from primary online.log RSS Server ol_xxx02 - state is now connected Can not send log 6848 After that I gave onbar -r -l on the R…
DR Default Isolation Level in SDS Secondary
Hi I have a question because DR is default in SDS Secondary Server, how i can setup LC like a Default Isolation mode in SDS Secondary Server?.…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Problem with check point
Hello All, My database is running on IDS 11.50.FC8W3 with HDR and RSS , I have a problem when I have tried to add space chunk of 8 GB in dbspace during the chunk addition database respond very slowly and ultimately checkpoint blocked up 70 seconds and following errors found in m…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
Error re-Starting SDS Secondary server
Are you sure that the logs are on a shared device? The way that SDS starts up is to perform a checkpoint on the primary and then use the LSN of the checkpoint as the starting point for the SDS node. So unless you are wrapping the logs in less than say a second, then I'm a bit co…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Informix Warehouse Accelerator : Problem with a se
Hello, I have another problem with Informix Warehouse Accelerator. When I try to add an accelerator on a secondary server (SDS), I have the following java exception 'Add Accelerator ...' has encountered a problem - User Defined Routine (accel_setup_dwa) VP context switch failed.…
SDS com OCFS ou sem
Friends I want to ride without using an SDS rawdevices putting a chunk of shared lun mounted on two different machines with the Oracle RAC using OCFS when the use SUSE in INFORMIX have to use OCFS or can simply assemble the two machines pointing to the same LUN without rawdevice…
Table Locked After Index Build
Good Morning, IDS 11.50.FC5 running HDR O/S AIX 5.3 I am looking for a way around waiting for a lock to release in a particular situation. Let me explain: 1. create index on large table 2. attempt to create another one or even a PK on the index created above. You get error 242…
Mach11 proxyWritePostPBlobCmdSync failed
IDS 11.50 FC8 Linux I get this error in my online log of the SDS secondary: ERROR: Mach11 proxyWritePostPBlobCmdSync failed has anyone seen this error? how do you fix it? Thanks Laurie…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Mach11 questions
Does anyone have a good source of in-depth information on Mach11? I googled, perused info center and watched some audio conferences but have not found the info I am looking for so was hoping there was a better place to look. Here are a few things I am looking for : -How UPDATE…
SDS and SAN Storage
Hi all what is possible and what is the best way to create chunks on a SAN- Storage (NetApp) for SDS. We are planning for IDS 11.50 database installations with SDS feature. OS will be LINUX (SLES or UBUNTU). As Storage we have a NetApp SAN. In case of cooked files (DIRECT_…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Inserting to SDS secondary
IDS 11.50 FC6 X3 Linux I am wondering if anyone is successfully using an SDS server and regularly inserting data from that server? I have an updateable SDS server that I am trying insert records to... the records insert successfully, but the application tries to get the generate…
Inserting to SDS secondary
IDS 11.50 FC6 X3 Linux I am wondering if anyone is successfully using an SDS server and regularly inserting data from that server? I have an updateable SDS server that I am trying insert records to... the records insert successfully, but the application tries to get the generat…
Another SDS question
I have 2 servers in an SDS cluster. ids_1 is the primary ids_2 is the secondary If the whole cluster is lost, and only the server with ids_2 comes back, how can I restart the ids_2 instance? If I start it with SDS_ENABLE =1 it will crash because it cannot connect to its prima…
SDS best practice query
We're working with a customer to set up SDS. It's going well. Because it's little-used there's not a lot of user experience about, apart from the IBM documentation and some useful blogs. Can anyone advice about the placement of the SDS_TEMPDBS and SDS_PAGING files in an envrio…
SDS secondary and LOCK TABLE
Hello all. I recently had an issue with a programmer on our site, regarding concurrency control and an SDS environment. The problem is, that he had a little table that was used to control an order sequence number. No serial column or sequence were used. It is a normal table and …
CRCOLS and VERCOLS and REPLCHECK
IDS 115FC6X3 I am setting up a system that will use both SDS servers and ER. I understand that CRCOLS and REPLCHECK columns are used for ER and VERCOLS are mainly for SDS servers... but it doesnt appear that you can add all 3 (or even 2) sets of these columns to a single tabl…
SDS & update statistics performance
Hi My situation: 1. I use MACH11 with IDS 11.50FC5W2 on Sun Solaris On Secondary server UPDATABLE_SECONDARY 0. 2. On SDS server assert and server stop: 15:56:34 Rollforward of log record failed. iserrno = 126 15:56:34 Log Record: log = 4807652, pos = 0x105558, type = OLDR…
DR: Ping Timeout
Hello, We are frequently receiving below mentioned messages in online logs of primary and secondary instances. This problem suddenly started to occur a few days ago and before that every thing was going fine. We didn't change anything (either in onconfig file or any other setting…
RE: Found a possible bug in IDS 11.x... and a nasty one at that... has anyone suffered this?
> From: domusonline@gmail.com > Subject: Re: Found a possible bug in IDS 11.x... and a nasty one at that... has anyone suffered this? > Date: Mon, 7 Dec 2009 23:14:12 +0000 > To: informix-list@iiug.org > > Ian Michael Gumby wrote: > > I have to agree that the issue is interesting…
HA (HDR) Replication Question
IDS 11.50.FC5 AIX 5.3 (4K Page Size) I am trying to determine how replication will work under this scenerio: Server A (my future primary) has multiple databases which contains tables which are actually located on other servers and are accessed through the use of synonyms. Inser…
MACH 11 questions
Zev Berezin wrote: > Hi, > > Greatly appreciated if someone can be of assistance in a couple of questions I > was recently asked on MACH 11 running IDS 11.50. > > 1) is it possible to have an SDS node against an HDR or RSS node? The reason No. SDS can currently only run against …
$ONCONFIG Parameter DRLOSTFOUND
IDS 11.50.FC5 AIX 5.3 On page 1-57 of the Admin Reference manual: DRLOSTFOUND specifies the pathname to the dr.lostfound.timestamp file. This file contains transactions committed on the primary database server but not committed on the secondary database server when the primary …
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
ANYONE KNOW IDS USERS OR CONSULTING FIRMS IN NYC
I am looking for work in the New York City metro area. Can anyone refer me to an end-user or a consulting firm?.. below is my resume: Frank J. Rotolo, frank.pr@msn.com _______________________________________________________________________________ Summary: Over twenty six years…
SDS Mach 11
When you are using SDS with Mach 11, how does Informix balance the load across multiple pieces of hardware that are all using SDS to share a disk? I assume through connection manager, but I would like to understand the logic of how it determines how to send a transaction. Also, …
HDR crashed after upgradation
HI Art did u mean that that crash happend becz i didnt shutdown the primary database properly. I thought that the crash happend becz of the way i upgraded the databases. To upgrade the database i have performed the following steps. 1) Shutdown the HDR and SDS instances 2) Shutdo…
SDS question
Hi all, currently if the primary server is re-started, all SDS servers are automatically brought offline and need to be re-started. Does anyone know of a way to keep secondary servers online in case primary goes down. (IDS 11.50 FC4, SunOS 5.10) Thank you, Ljiljana Zivanovic …
SDS pre-requisite
Hi, Can we setup SDS without using special file-system like IBM's GPFS? If no then what are the options to choose for Sun Solaris. regards, Kamran…
Read-Only (SDS) (CKPT REQ)
Hi! After run checkpoint - SDS server is blocked. IBM Informix Dynamic Server Version 11.50.FC5 -- Read-Only (SDS) (CKPT REQ) -- Up 00:00:41 -- 2748416 Kbytes Blocked:CKPT online.log: 17:45:14 Maximum server connections 0 17:45:14 Finished processing open transactions on …
Re: SDS performance
Alexander wrote: > Hello everybody, > > Our is planning to upgrade IDS from 9.4 to 11.50 along with hardware > upgrade which includes FC attached disk array that will be shared by > two servers. It looks like we can try to use what is called Sared-Disk- > Secondary server. > > I'…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
SDS performance
Hello everybody, Our is planning to upgrade IDS from 9.4 to 11.50 along with hardware upgrade which includes FC attached disk array that will be shared by two servers. It looks like we can try to use what is called Sared-Disk- Secondary server. I've searched this group for SDS …
program failing in secondary server
Hi. In a SDS environment there is a difference between inserts and puts. In the primary instance the program works correctly but in the secondary it fails with and trying to insert null value in a column that don't accept nulls.…
SQLTRACE on HDR Secondary
Is there a trick to get SQLTRACE to work on the HDR Secondary. We use our secondary for some read only applications and would like to be able to analyze the queries with SQLTRACE. This is for HDR, but also wonder if SQLTRACE works for RSS and SDS Read Only Secondaries? IDS 11.…
Re: 11.50.xC4 Compression with workgroup edition?
An easy way to distinguish between IBM (DB2 and IDS) compression and Oracle compression is to look at e.g. an employee table with, say names and addresses and other junk (like salaries ;-) Block compressions wins, as Mark points out, in fast changing data. Global compression wins…
Removing SDS Node servername has timed out - rem
Hi all, informix 11.5FC4 on HP-UX 11.23 I have one primary and two SD secondary instances in my cluster. In my cluster my one of the secondary instance goes down and In the online.log , IDS report the following error: 10:51:31 ERROR: Removing SDS Node prodsds2_tcp has timed ou…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
CDR servers on SDS primaries will not connect
IBM Informix Dynamic Server Version 11.50.FC3X8 We have historically combined our test and development environments. But I have been tasked with separating them. To that end we have created test and dev SDS servers. Howerver, one of the projects requires that the test and dev da…
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
IDS with IBM HACMP
Hi , Does anybody know where can I find reference document for implementing Informix (10.00 or later) with IBM cluster , HACMP. Id like to know about this concept. Does it work or not ? What is the pro/con comparing with Informix HA such as HDR, SDS,RSS. Thank you in advance, J…
Converting SDS to primary or standard
After a system change and reboot, we lost all disk access to SAN storage on our primary server. Is there a way to change teh configuration of an SDS server to become the primary server in the cluster when the primary server is down? The limited SDS documentation only gives comman…
Truncate does not work on "Updatable (SDS)" for TE
Question, is the truncate command allowed on an "Updateable (SDS)" server for a TEMP table? When I run it the command executes but does not truncate the TEMP table. I could not find any documentation that says it cannot be ran on the "Updatable (SDS)" server. There are no error…
Shared Disk Secondary
Hello, I have a query in regards to SDS (Mach11) feature. Is it compatible with HP Service Guard? We have an EVA connected to an HP itanium server through san and OS HP UX 11.23. So what are the prerequisite that is needed for implementing SDS? Regards Poonam…
Problem with SDS server disconnecting - Informix 1
SDS_TIMEOUT is set to 500 -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of Madison Pruet Sent: Sunday, February 15, 2009 12:18 PM To: ids@iiug.org Subject: Re: Problem with SDS server disconnecting - In.... [14886] What is SDS_TIM…
Building Indexs on Primary Server
On Feb 4, 6:30 pm, Mo <mohitanch...@gmail.com> wrote: > Informix 11: > > We have HDR servers, I am seeing that creating an index on table of > 100M rows takes more than 16hrs. Could it be because of HDR secondary > server trying to build the index at the same time? We have PDQ > …
Question for Connection manager and SDS
I have 2 question for IDS11.50 SDS 1. What is the machanism of Connect Manger to select the dabase server ? Round robin , random ? For example : SLA CMport=(dbport1+dbport2+dbport3) Can we set up the additional rule for CM such as use dbport1 40%, dbport2 30%, dbport3 30% ? 2…
Re: IDS 11.5 and SDS
On Jan 28, 3:11 pm, Madison Pruet <mpru...@verizon.net> wrote: > Madison Pruet wrote: > > Tom wrote: > >> Greetings All, > > >> Has anyone configured IDS 11.5 with SDS on any AIX platforms? I am > >> configuring two new servers and plan on using IDS 11.5 features for HA > >> and …
Re: IDS 11.5 and SDS
Tom wrote: > Greetings All, > > Has anyone configured IDS 11.5 with SDS on any AIX platforms? I am > configuring two new servers and plan on using IDS 11.5 features for HA > and it looks like a Shared Disk Secondary would fit the bill. However, > a call to IBM Informix as well as…
Re: IDS 11.5 and SDS
On Jan 28, 12:01 pm, TBP <th...@Usenet-News.Net> wrote: > TBP wrote: > > Tom wrote: > >> On Jan 28, 10:14 am, TBP <th...@Usenet-News.Net> wrote: > >>> Tom wrote: > >>>> Greetings All, > >>>> Has anyone configured IDS 11.5 with SDS on any AIX platforms? I am > >>>> configuring two…
Re: IDS 11.5 and SDS
On Wednesday 28 January 2009 16:47:17 you wrote: > On Jan 28, 10:14 am, TBP <th...@Usenet-News.Net> wrote: > > Tom wrote: > > > Greetings All, > > > > > > Has anyone configured IDS 11.5 with SDS on any AIX platforms? I am > > > configuring two new servers and plan on using IDS 11…
IDS 11.5 and SDS
Greetings All, Has anyone configured IDS 11.5 with SDS on any AIX platforms? I am configuring two new servers and plan on using IDS 11.5 features for HA and it looks like a Shared Disk Secondary would fit the bill. However, a call to IBM Informix as well as IBM AIX Software grou…
HDR - Sync secondary manually
> -----Original Message----- > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of H.G > Sent: Wednesday, January 28, 2009 12:57 AM > To: ids@iiug.org > Subject: HDR - Sync secondary manually [14651] > > Hi All, > > IDS 10.00.FC8 > RHL AS4 (2.6.9-42.ELsmp, gcc v…
IDS 11.10.FC2, SDS, AIX and DS4800 SAN
Hi There, I'm taking a look at SDS to offload reporting from an OLTP server to another IDS server. Details on environment, hardware, etc are: * IDS 11.10.FC2 for both * AIX 5.3 TL8 SP1 for both * SAN DS4800 for both * OLTP host: p570 Power 5 * Reporting host: p650 Power 4. At th…
cookbook: Linux + SDS + iSCSI
Cool Stuffs: Linux/Desktop + SDS/MACH11 + iSCSI This is a little cookbook/step-by-step what I was tested successfully here and want to share with everybody. Is more focused how configure the linux ... the IDS part is to easy to do a cookbook :) but! if you need information how c…
Re: Smoke and mirrors...
On Oct 12, 2:20 pm, InDeep <ind...@indeep.com> wrote: > Ian Michael Gumby wrote: > > To your point. Yes IDS will perform much better that either Oracle or > > DB2 in a VM environment. > > Let's not make sweeping statements without facts. I have been happy with IDS > so far on VM…
Re: Smoke and mirrors...
Ian Michael Gumby wrote: > To your point. Yes IDS will perform much better that either Oracle or > DB2 in a VM environment. Let's not make sweeping statements without facts. I have been happy with IDS so far on VMware Fusion on my Macbook Pro, but I have not had a history of ex…
Fwd: Re: Raw Disk still preferred for 11.5? - File system type for SDS
The sysadmin corrected me - OCFS2 - I dont know if that makes much difference or not.. laurie Laurie Gustin" <lgustin@utah.gov> 10/08/08 11:03 AM >>> Thanks so much for all the feedback, I have learned a great deal. I think we will go with a cooked system. I think it will b…
Re: Raw Disk still preferred for 11.5? - File system type for SDS
Laurie Gustin wrote: > Thanks so much for all the feedback, I have learned a great deal. I > think we will go with a cooked system. I think it will be better > administratively, since they wont give me root access to the new > servers and it will be a chance to try something ne…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
Raw Disk still preferred for 11.5?
I am setting up a new set of servers that will utilize the SDS capabiltiy of IDS 11.5 and just want to make sure that raw disk space is still the best way to go. I plan to have at least 3 SDS servers. SLES 10.2 4 processors per server 32 GB ram per server Thanks in advance …
HA : What is the best ?
On Mon, Sep 15, 2008 at 3:20 AM, Obnoxio The Clown <obnoxio@serendipita.com> wrote: > Henri MOUKOURI wrote: >> 2/ When adding an external RAID device >> >> a) SSD > I assume you mean SDS? SSD could be Solid-State Disk -- or it could be a typo for SDS as you said. -- Jonathan Le…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
How I can to change status from SDS secondary to Primary.
Hello All. I have my testing environment. I have server1 is primary server and server2 is SDS secondary server and one Connection Manager Arbitrator. When I shutdown my primary server, Connection Manager switches my application to the SDS secondary server. After that my server2 b…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
Re: SDS and RAW, It's possible?
On Thu, Jun 12, 2008 at 3:10 AM, Isidre Pons Roca <ipons@base.altanet.org> wrote: > We are planning to move from IDS 9.40.UC4 in Solaris 9 to IDS 11.5.FCx in > Solaris 10. > > Now We are using raw devices in SAN and HDR. > > New functionalities in IDS 11.5 are the use of Shared D…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Informix Continuous Availalbility Feature Demo
This marketing video of IDS HDR, SDS, RSS and Updatable Secondary Nodes came in on my Google alerts this morning. http://www.cocktail-server.com/informix-caf/ Andrew…
Managing IDS in IBM HACMP environment
> -----Original Message----- > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of > ROBERT ROMERO > Sent: Thursday, May 08, 2008 1:59 PM > To: ids@iiug.org > Subject: Re: Managing IDS in IBM HACMP environment [12053] > > Appreciate the comments. > > We are plan…
Re: Question about redirected write of Informix 11.5
From: <dcruncher4@aim.com> > > Two questions: > > 1. How does the secondary node determine that the before image of primary > and > secondary server are same. > > 2. What is meant by "During the period in which the write operations are > sent > and then received back from Primar…
Re: Optimizer Issues with 10.00.xC8
Another point of confusion that has me summoning the UPDATE STATISTICS gods. As a reminder, my test table ("foo") looks consists of five columns, col1-col5. Col1, Col2, and Col3 are integers, while Col4 and Col5 are character fields. I have a unique index on (Col1, Col3) and a…
IDS11 SDS
Hi! I have some problems getting SDS up and running. I set up 2 machines with v11.10FC2, both connected to a SAN. dbsroot is located on the SAN and can be seen and read and written from both machines. Configuration of both machines is identical except to the points mentioned i…
High Extent Tables.
Quick question: 1. If I create a clustered index and drop it on a table with high extents, will that reorganize it and reduce the extents or 2. Do I have to unload the data, drop the table, re-create the table, and re-load the data or 3. Should I rename the original table to a…
How to initialize an SDS instance
Hi, is there anybody who installed an SDS instance on IDS 11.xx. Maybe you can tell me where I can RTFM? Is theI have there anything I have to take into consideration when creating my raw devices? TIA Stefan…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
HDR failure handling on network disconnection
DANNY NG wrote: > As I know that HDR is working by HDR buffer for transferring primary data to > secondary data. But what if the failure of network connection occurrs > intermittently and the primary physical log was backed up to tape for freeing > its space, how the informix dat…
SDS
Hello, I have played around with SDS some and it seems to work quite well. I have a question if the following will work though ... server1 - primary server2 - secondary . Both systems get shut down ...and host names are swapped...then brought back up ..desired effect... serve…
What is ids11 new function RSS for?
Hi , I had read informix ids version 11 administrator guide about RSS (remote standalone server) ? I am wondering about page number 434 : " The high level of coordination between a primary and secondary HDR pair can cause performance issues if the secondary server is located o…
Re: RAC in Informix by year end?
Data Cruncher wrote: > Taken from DBTA magazine. > > Did I read this correctly? Does it mean that by year end Informix > will offer RAC. > > ============================================= > HDR, RSS and SDS servers and even ER can be combined in any way to > provide a sophisticate…
IDS 11 sds problem
Hi: I installed IDS sds in SUN OS 5.9, I initialize the primary and SDS server successful. I could execute some query from SDS server, But after I ran some applicaton in the primary server, The sds server disconnect from the primary server. In the online.log , IDS report the fol…
HDR or storage remote mirroring, which is better?
roger@star2000.com.tw wrote: > I like to make a Diaster Recovery system, > and just wondering which system I should choose:Informix HDR or > storage remote mirroring . > storage company told me that remote mirrroring can copy primary > server's modifying block to the secondary s…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Long Checkpoints - cond wait(logbf2) with HDR and ER defined
Andrew Ford wrote: >> Andrew Ford wrote: >>> I'm running into some seriously long checkpoints (45 - 150 seconds) when >>> trying to delete data from a table (same results if dbdelete or straight >>> delete sql used). >>> >>> lru_min_dirty and lru_max_dirty are configured in such …
mystery server in HDR
tomcaml@yahoo.com wrote: > Hello all, > > upon bouncing our secondary server, the log shows it is trying to > connect to a primary server that does not exist! > we have searched the secondary server itself, system tables, etc and > cannot find a reference to this mystery server >…
Difference in checkpoint durations on HDR Primary and Secondary.
RoB wrote: > Hiya guys! > > I've just come across something I didn't think was possible: > > IDS 10.00.FC5 on Linux RedHat. > > > Primary: > > ... > 14:26:53 Checkpoint Completed: duration was 0 seconds. > 14:26:53 Checkpoint loguniq 8922, logpos 0x2066018, timestamp: > 0x93d6…
Re: Senior Oracle DBA now Learning Informix by Request
Tambi Dude wrote: > "DA Morgan" <damorgan@psoug.org> wrote in message > news:1166401364.229016@bubbleator.drizzle.com... >> Tambi Dude wrote: >>> "DA Morgan" <damorgan@psoug.org> wrote in message >>> news:1166388023.574809@bubbleator.drizzle.com... >>>> How one defines quality is…
HP-UX PA-RISC/Itanium
HP claims that HP-UX maintains high degree of compatibility between PA-RISC and Itanium based system. Here is the quote from document they published on their website (http://h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,9928 ,00.html): "One of the design go…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
Re: Long checkpoint woe
"Roy Mercer" <roy.mercer@gmail.com> wrote in message news:1143647081.810907.208860@u72g2000cwu.googlegroups.com... > Hey, I just noticed this is part of HDR. > The checkpoint has to wait for the secondary server to write to disk. > This could be your bottleneck also. Make sure t…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Free space...Clustered Data
Urich Ann wrote: > Do many companies use clustering indexes...via table data ordered by a > key (clustered)? > > Is there a performance boost in Informix when the data is clustered -- > and then retrieved via cluster sequence? The performance benefit is marginal - and debatable.…
Re: Urgent (Blobs and Smart Blobs)
"Jonathan Leffler" <jleffler@earthlink.net> wrote > BYTE and TEXT blobs can be stored IN TABLE; that is, in the same dbspace > as the data in the rest of the row. When that happens, the blob data is > on separate pages. IIRC, in table blobs are logged through the log files > an…
Re: IDS 10 erratic run times
"Neil Truby" <neil.truby@ardenta.com> wrote in message news:3pliprFb403pU1@individual.net... > IDS 10.0FC3 on Solaris 2.9 > >>> This is a brand new server which we are preparing to migrate a v9 system >>> to. > Over the past few weeks I have run multiple dbimports from more-or-le…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
Re: Update Statistics
The order I run update statistics is 1) MEDIUM DISTRIBUTIONS ONLY, 2) HIGH for first column in an index, 3) LOW for all other columns in an index, 4) UPDATE STATISTICS FOR PROCEDURE <procname> Is this still the recommended order? Regards Colin >From: "Andrew Ford" <andrewfor…
Re: Update Statistics
Yeah. I've got all of that. But is it true that running update statistics high (or medium) without the 'distributions only' clause does the work of low (building statistics) plus some extra stuff (building distributions). I've been putting a lot of work and thought into optimi…
RE: Update Statistics
Update statistics low doesn't build distributions, the way high does. It compiles information about the structure of the indices (depth, leaf nodes, clustered-ness, second-highest and second-lowest values, etc), and places them in systables, sysindexes (or sysindices, in IDS 9.4.…
Re: XPS
"Mark Townsend" <markbtownsend@comcast.net> wrote > Oracle was using three pricing metrics in those days - unlimited user > pricing based on the MHz of the CPUs, named users and concurrent user. > > In 2000 the unlimited user pricing for Oracle Standard Edititon was $15 > per MH…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Re: serial and sequential scan
superboer7@planet.nl (superboer) wrote in message news:<bb790a36.0502160532.2c2ac371@posting.google.com>... > where is OPTCOMPIND set to???? if 2 then set it to 0 > > or > > export OPTCOMPIND=0 > > start dbaccess with your problem qry. > > Superboer. > > > > "Bill Dare" <dareb@je…
Re: serial and sequential scan
hajek@nspuh.cz wrote: UPDATE STATISTICS MEDIUM FOR TABLE... Is insufficient. Unlike HIGH and LOW, MEDIUM does NOT update the systables, syscolumns, and sysindexes records. It is the information in the latter that IDS uses to determine the cost of using a particular index. I …
Index corruption
Known problem, happens when index size (in particular, part of index pages allocated among previously-used pages) is bigger then 3/4 of the physical log in HDR environment. HDR/secondary is triggering an infinite checkpoint by 'physical log fullness' Fixed in 9.40uc4w4, 9.40uc5…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: HDR unusable with 9.40
Hi Alexey, this is another silly problem that I found in 9.40.UC2 and reproduces in 9.30.FC5. I opened a tech support case with UK IBM, and after more than 10 days waiting,( I sent them a test case ), they answered that they reproduced the problem under 9.30.UC2 but the didn't r…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Re: HDR with Synchronous replication
Francisco Roldan wrote: > There is an important thing to consider if you choose > to use HDR . The secondary server must be a "Stand By" Server. > By "Stand By" i mean that, no hard work like dss queries > on the secondary server, because checkpoint between > servers are synchr…
Re: Views question?
Comments in-line. rkusenet wrote: > "Mark Townsend" <markbtownsend@comcast.net> wrote > >>Hey - I'm the bug, fat buzztard. Anyhow, still no winner. I believe both >>of these do have Alter Table Drop Column. So who could it be ? Lets >>think about this for awhile. Are we all thi…
Problems in Informix Server on AIX
Vaidyanathan, 1) mail the onconfigs for both servers. 2) What do you mean by "we mount the storage device" - do you mount a file system? Is the volume group containing the disks defined and online on the secondary? Do an "lsvg -p <vgname>" on both machines, are the same disks th…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: An interesting meeting with IBM
"Andy Kent" <andykent.bristol1095@virgin.net> wrote in message news:ac5fb36.0404080205.28a8b515@posting.google.com... > Data, > > Yes, I've worked with Oracle. > > Not sure why you ask. > I needed to get answers first before proceeding. Most of the time when people say they will…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
AW: HRD replication
Sorry, Issue is resolved ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: Alexey Sonkin [mailto:alexeis@grandvirtual.com] > Sent: Monday, February 09, 2004 2:50 PM > To: 'informix-list@iiug.org' > Subjec…
AW: HRD replication
Sorry, Issue is resolved ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: Alexey Sonkin [mailto:alexeis@grandvirtual.com] > Sent: Monday, February 09, 2004 2:50 PM > To: 'informix-list@iiug.org' > Subjec…
HRD replication
Hi, everybody, We're getting a very strange error when we try to establish the HDR data replication: SECONDARY: informix@db-2:~$ tail -f online.log 12:40:59 Checkpoint Completed: duration was 0 seconds. 12:40:59 Checkpoint loguniq 7071, logpos 0x1081a0c4 19:19:21 DR: new t…
HRD replication
Hi, everybody, We're getting a very strange error when we try to establish the HDR data replication: SECONDARY: informix@db-2:~$ tail -f online.log 12:40:59 Checkpoint Completed: duration was 0 seconds. 12:40:59 Checkpoint loguniq 7071, logpos 0x1081a0c4 19:19:21 DR: new t…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Re: Anyone seen this behaviour before ?
TBP <TheBIgPotatoe@Nospam.Nothere.Co.Uk> wrote in message news:<brn87n$vi0$1@sp15en20.hursley.ibm.com>... > mad_villan wrote: > > I have a HDR pair which were working fine up until lately. The primary > > runs in a veritas clustered environment - secondary is standalone. > > Conf…
Anyone seen this behaviour before ?
I have a HDR pair which were working fine up until lately. The primary runs in a veritas clustered environment - secondary is standalone. Configuration is fine. However, when i recently failed over to the second node in the cluster the instance came up cleanly BUT there was a con…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
HDR Logical Recovery Problems
Please read documentation again, when a secondary is switched to standard, you have to restore it with a backup from primary! only when primary switched to standard and afterwards back to primary and the secondary is secondary all the time and all needed logocal logs are availab…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re.tempspace
Hello Everybody, Env.AIX 5.1 IDS 9.30 UC3 with HDR. We have 6 tempdbspaces of 1GB each on primary and secondary server, on secondary we are running Crystal Reports 8.5 couple of reports which are using VIEWS failed, when I checked online.log it says that "tempdbspace-5" is full…
HDR
hi, We are trying to setup HDR (using IDS 7.31UD3X5a) on NCR UNIX. The two enviroments are configured identically. HDR starts successfully (We also created databases and table and everything works fine), when we try to simulate a failure on the primary (onmode -ky), then the sec…
oncheck -me Feature Request
OK, I've collected the comments of the discussion on oncheck -me, and my own correspondence with contact, and these are the results of my investigations: 1- oncheck -me was never intended for general release 2- it was not completed internally and is not completely safe, meaning…
Machine Down. Replication question
We had to break replication a few weeks ago because of a problem in 9.2 UC5. Yesterday I tried to bring my secondary up to do a sanity test. Heres what I got in the log... 09:38:45 Informix Dynamic Server 2000 Initialized -- Shared Memory Initialized. 09:38:45 Physical Recover…
Informix Data Replication drop after reboot
I encounter a problem during reboot the Primary server which turn off the data replication process as below: Informix Dynamic Server Initialized -- Shared Memory Initialized. DR: Trying to connect to secondary server ... DR: Receive error DR: Type exchange failed Physical Re…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
Re.replication
Hi, In case of HDR do we have to have the same chunk paths and same size on primary as well as secondary server, I can understand that we need to have same dbspaces. Thanks in advance. Sushil... _________________________________________________________________ STOP MORE SPAM w…
data replication on linux9.20 errors.
This is a multi-part message in MIME format. --------------EE626B64EF05E473BA0BEF7E Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit hi , Has any one seen these errors on secondary and primary servers? I haven't - and i can't find out what's wrong (i s…
force engine to use indexes
Because your update statistics indicate that the data is highly unordered and will result in multiple hits for the same data page. Because of that, it is mathematically faster to do a sequential scan of the data pages and sort them than it is to hit the same data pages multiple …
DR: Cannot connect to primary server
We have 7.31 on Solaris_x86 5.7. The secondary server suddenly said 16:47:22 DR: ping timeout 16:47:22 DR: Receive error 16:47:23 DR: Receive Btree error 16:47:24 DR: Turned off on secondary server and keeps on saying 12:28:20 DR: Trying to connect to primary server ... 1…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Avoiding rebuilding of indexes
<Jinu.Joseph@citicorp.com> > We operate on a database of size 22 GB. For operational efficiency and > speed it was suggested that the indexes be dropped and recreated on a > weekly basis. Now the problem is that this takes 7 hours, and we dont > have that much time. So there are …
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: NUMCPUVPS
mmmmm In addtion to what the others said.... Are you running KAIO? If you are do the following echo "_ncols/D"|adb -k /stand/vmunix /dev/kmem If this going up at all be worried, if it's going up real fast be very worried. It measures the number of collisions ie the number o…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
IDS 9.20 in a Clustered Environment
Hi All, Has anybody implemented or used IDS 9.20 in a clustered environment? I would particularly like information regarding its uses as a High-Availability and Scalability Solution. Any information will be greatly appreciated. Thanks, DOn…
ODBC connectivity with EDS
Hello Admins, I having a problem connecting to my EDS environement running in a clustered environment. I have SDK (2.40 TC1) in my windows NT workstations and when I do Ilogin demo and try to connect to the EDs database I get -952 error. I have a IDS 7.31 enviroment in the sa…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
RE:
From: SAMPATH <sampath@gulfins.com.kw> > Its not RAID. Its a cluster software as series of disks will be >in a box accessed by differenct Unix servers. Thanks. I believe the technical term is "disk farm" :-) OK, as long as it's not RAID 5, you're over hurdle no 1. Now for hur…
Re:
From: SAMPATH <sampath@gulfins.com.kw> > > We're having IDS 7.3 running on Alpha 4100. All DBspaces are raw >partitions and mirrored. We are planning to move the disks out of >machine and put them as a disk array with clustering software from >Compaq. 5 disks + 1 emergency disk. …
RE:
Hi, Its not RAID. Its a cluster software as series of disks will be in a box accessed by differenct Unix servers. Thanks. Sam > -----Original Message----- > From: Obnoxio The Clown [SMTP:obnoxio@hotmail.com] > Sent: 01 June, 2000 11:44 � > To: sampath@gulfins.com.kw; informix…
Posting from the Informix-list
Hi, We're having IDS 7.3 running on Alpha 4100. All DBspaces are raw partitions and mirrored. We are planning to move the disks out of machine and put them as a disk array with clustering software from Compaq. 5 disks + 1 emergency disk. Has anyone tried this before? If one of t…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
Re: Top Databases Used
Well it depends on all what you will be doing with your database. OLTP "based stuff" Informix, no doubt, fastest in the market at oltp with little or no headaches. Warehousing data of 1 terabyte or more, Teradata, period. Easy to manage, DBA's dream. "Stuff's not running fast…
Re: informix, linux and beowulf
Informix does NOT use that kind of clustering as is present in Beowulf. The Informix clustered product, XPS or IDS 8.xx, uses multiple co-servers in two distinct ways. 1) It can spread a database, indeed even a single table, across multiple coservers on the same or on different…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Borland Delphi and Informix
Hello everybody, we have huge performance problems on our 2-node Sun-Cluster with Informix: Environment: Sun E4500, 6 CPU's, 1GB Memory (primary host for database) Sun E3500, 4 CPU's, 1GB Memory (secondary host for takeover) 4 A5000-Diskarrays with 14 9,2GB disks each connec…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
IDS on NT feasability
This is an OLTP or DSS system? For a 50GB system, personally, I'd opt for some kind of UNIX. NT just chugs its heart out and as was mentioned, is more expensive the bigger it gets. Of course, you could pilot the system on both NT and a UNIX of some kind. IBM has good NT, in …
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
A question about Indexing.
Vijith Gunawardhana wrote: > > Hi > > In my work environment we are using Informix Dynamic Server AD and XP > Options 8.2. > Seems that nobody else has taken a crack at this, so I'll have a go (and try to leave my prejudices at the door :-)). > > Here they don't use indexes at …
oncheck and locks
In article <7rifbi$9he$1@nnrp1.deja.com>, evetsm@rocketmail.com wrote: > > > We need 24x7 availability and oncheck is locking tables up for too > long. Can we : > > 1. Switch off the oncheck table locking ? No, but oncheck doesn't lock table exclusively. For the given moment o…
HDR and Tempspace problem
Hi, I've set up a HDR Primary/Secondary pair of Informix 7.31 on Solaris x86. All works fine, except that certain complex "select" queries on the secondary server result in a "Cannot create temporary file" error (code -229). None of my six tablespaces is a temp tablespace, …
Informix HDR problem
Hi, Im trying to setup replication between two servers absolutely identical in setup. Theyre both running SCO OSR5.0.5 and Informix 7.30 UC2. The problem is that when connecting to each other, the initial log exchange seems to hang... BUT this does not happen all the time, occas…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
RE: -710 Error in Multithreaded Informix 7.24 UCX5 on HP-UX 10.20
We also had this problem and figured out that when we did a HPL it changed the constraints and indexes, loaded the data and then changed the constraints and indexes back to what they were defined originally. -----Original Message----- From: Art S. Kagel [SMTP:kagel@bloomberg.n…
-710 Error in Multithreaded Informix 7.24 UCX5 on HP-UX 10.20
Jim Maus wrote: > > My multi-threaded Informix esql process received a -710 (table-name has been > dropped, altered, or renamed) error. The process was using a prepared > statement to fetch using a cursor. The source table was not dropped, > altered, or renamed. I cant reproduce…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: HDR
In article <35888C1F.334B6D5A@hp.com>, Deepa Sankaranarayan <deepa_sankaranarayan@hp.com> writes >Hi > >I am trying to establish HDR between to of my 7.23UC7 Informix servers. >I can connect the primary to the secondary vice versa, but my secondary >server is sleeping forever on …
HDR
Hi I am trying to establish HDR between to of my 7.23UC7 Informix servers. I can connect the primary to the secondary vice versa, but my secondary server is sleeping forever on recovery. Following are the outputs from the 2 servers: Primary: 10:28:03 DR: new type = primary, se…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Re: How to reduce SE .dat & .idx file sizes?
We're also running SE-Databases and there is only one way to downsize the dat and idx file sizes: unload, drop, load or an dbexport/dbimport. My solution for this problem is to do a weekly dbexport/dbimport in cron. If greater/more lecks in your dat / idx files, this will slow d…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Informix Directions
Has anyone out there been working with Informix since the late '80s? Remember how they simply dumped VMS support back then? Seth "Tim Schaefer" <tschaefe@mindspring.com> writes: >Yeah, um, but I heard that the SCO porting of Informix is over. There = >will be >no more SC…
Re: Informix Directions
Yeah, um, but I heard that the SCO porting of Informix is over. There = will be no more SCO ports, and Informix is dumping the small end. What does this do to the market, and in particular, my career path? It = goes in the dumper to stay with Informix. Apparently this is prob…
Re: Replication setup problem
David Williams wrote: } In article <6a28fu$cdo@cssun.mathcs.emory.edu>, Christian Winterhager } <christian.winterhager@orbit.de> writes } >Hi, } > } >secondary server hangs in Recovery Mode! } > } >We have ODS 7.22 UC2 on both machines, and SCO 5.0 } >All Things are identical an…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
Re: Replication setup problem
In article <6a28fu$cdo@cssun.mathcs.emory.edu>, Christian Winterhager <christian.winterhager@orbit.de> writes >Hi, > >secondary server hangs in Recovery Mode! > >We have ODS 7.22 UC2 on both machines, and SCO 5.0 >All Things are identical and we start with >1. an archive Levele …
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
Re: De-fragmenting tables. Some questions
An even easier way is to use the "ALTER FRAGMENT ... INIT ... " to rebuild the taregt table wherever you want. For a big table I'd do it at odd hours with logging off so you don't get bit by a long transaction. Greg Thomas J. Girsch wrote: > > Expanding on Art's expansion on …
Re: De-fragmenting tables. Some questions
Expanding on Art's expansion on David's suggestion: A quick-and-dirty way I used to use to defragment tables was to do an ALTER TABLE NEXT SIZE to set the next extent size sufficiently high, and then do ALTER INDEX <pick-an-index> TO CLUSTER. Be warned, though, that this method…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: Informix vs. Sybase vs. Oracle vs. (gasp) MS SQL Server
Chris Curvey wrote: > > > If you have row level locking, the first select stmt will lock one row. > > As the primary key is 4 bytes you can potentially put 4-500 keys on any > > page (if you have 2K pages). In a page lock system (like Sybase and > > MSSQL) the probability of a us…
Re: Question on Update Statistics
[This followup was posted to comp.databases.informix and a copy was sent to the cited author.] In article <19971107041400.XAA11881@ladder01.news.aol.com>, kponn@aol.com says... > Hi > > If I want to run update statistics on busy tables, can I do the following: > > 1. select tabn…
Re: [Q] How do I force usage of index
Daniel Williams <#danny@uk.ibm.com> wrote in article <341014AA.41C6@uk.ibm.com>... > > Is there any way I can force usage of the indexes to see if it makes any > > difference (presuming that the the query optimizer has decided not to > > use them for some reason) ? > > Have you r…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
Re: script or spl for update statistics
In article <5ujprh$mcu@cssun.mathcs.emory.edu>, zeljan@laus.hr says... > Hi, > > in Informix Guide To SQL Syntax there is recommendation for updating > statistics: > 1) run update statistics with distributions only > 2) run update statistics high for columns with indexes > 3) run…
Re: Informix and Clustering
Nils Myklebust wrote: > > Informix and NCR have some special cooperative solutions to this used > successfully by several customers. There was even a setion on this at > the reasent user conference that your local Informix office may be > able to get information on for you. SUN, …
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: Help: Reducing Extents -Reply
Just a comment about Gregs posting. I have also used fragment to rewrite a non-fragmented table in place. I have found afterwards a high likelihood of receiving 243/172 errors on such tables. This seems to be reduced if they are [de]fragmented into a different dbspace that they…
Re: Help: Reducing Extents
Chad, after increasing the NEXTSIZE in systables (don't worry too much about the first extent, it'll tend to be coalesced pretty well unless you have a lot of fragmented tables in the same dbspace). two methods not mentioned are: 1. use onunload/onload - it's waaaay faster tha…
Re: online 7.11 bug
>Date: Fri, 25 Apr 1997 00:44:57 GMT >Message-ID: <335FFE89.5E24@transre.com> > >I have online 7.11uc1 on solaris 2.4. I think I'm hitting the bug >#30367 which is basically not being able to do a physical restore on the >secondary server. I've tried different tapes and differe…
Re: Informix vs. Sybase vs. Oracle vs. (gasp) MS SQL Server
In article <862264236.20961@dejanews.com>, Brenda Muller <muller.brenda@primestar.tci.com> writes: > > >plans like clustered SMP systems with fiber between the boxes, > > >or some NUMA-like MPP systems with "memory" connectivity > > >between boxes (I still don't see how that woul…
Foreign keys and indexes
We use a mixture of foreign keys and application managed referential integrity, depending on our application. I prefer application managed RI on our larger databases because it is more efficient. We have some very large tables with highly duplicate values on the child columns t…
Re: ***Bitmapped Indexing API Beta - Now Available***
Patrick Gainer <gainer@64k.com> wrote: >Deon du Plessis wrote: >> 3) THE ROUTINES OVERCOME THE PROBLEMS ASSOCIATED WITH HIGH CARDINALITY >> >> DATA. This is basically acheived by breaking the data into sections. >> If there is no data in a particular section, a BM for that secti…
Re: cluster index
I agree with Billy et al regarding the process for updating. I thought I might add that we use clustered indexes as a means of database maintenance. Every so often we will suspend use of the database, run appropriate clustered index creates, and then remove the indexes on compl…
Re: Indexes and Stored Commands/Procedures
On 12 Sep 1996 01:49:06 GMT, sammers@pop03.ca.us.ibm.net (crunch) wrote: > >General question on indexes. > > IMHO tables (with indexes) that have high volumes of insert and >delete operations need to be re-index periodically, else 'bad' things >will happen. Please comment. Hi, W…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: Informix, Sybase, Oracle or MS SQL server
> : Sybase: > : Liked dealing with them but it seems that they have some serious > : problems--no row-level locking, no two-phase commit. I like their > There's another thread in here kicking around row level vs page level locking. > It pops up periodically. I have not found …
PRESS: EDS' dbINTELLECT TECHNOLOGIES & INFORMIX FORM STRATEGIC
EDS' dbINTELLECT TECHNOLOGIES AND INFORMIX SOFTWARE FORM STRATEGIC=20 RELATIONSHIP MENLO PARK, Calif. (April 8, 1996) -- Informix Software, Inc.,=20 (NASDAQ: IFMX) the leading provider of parallel processing database=20 technology, today announced that EDS dbINTELLECT(SM) (dbI)…
Re: Large table extents
Cheryl Kendricks wrote: > > Yes to question 1. Yet, if you have an index and set up query correctly > to use index it will use it. But once a table becomes highly fragmentted > either due to delete or insertions it is a good idea to unload and reload > the table. Or if you have …
Re: Large table extents
On Wed, 13 Mar 1996, Cheryl Kendricks wrote: } Yes to question 1. Yet, if you have an index and set up query correctly } to use index it will use it. But once a table becomes highly fragmentted } either due to delete or insertions it is a good idea to unload and reload } the ta…
Re: Large table extents
Yes to question 1. Yet, if you have an index and set up query correctly to use index it will use it. But once a table becomes highly fragmentted either due to delete or insertions it is a good idea to unload and reload the table. Or if you have enough space within the dbspace ju…
Re: Clustered indexes - again
} >So given these responses I am confused. Does leaving an index } >clustered effect future inserts/updates etc? } } >Robert Clark } } } > } >-------------------------------------------------------------- } >e-mail: robert@clark.netkonect.co.uk } >snail: 12 Balvernie Grove, Wan…
Re: Clustered indexes - again
On Wed, 13 Mar 1996, tolly brumbelow wrote: } robert@clark.netkonect.co.uk (Robert Clark) wrote: } } >OK, } } >I have now had a few responses to my original Q about clustered } >indexes - thanks to all of you. } } >Dan Madvig (d-madvig@bethel.edu) said: } >> If you leave it chus…
Re: Clustered indexes - again
robert@clark.netkonect.co.uk (Robert Clark) wrote: >OK, >I have now had a few responses to my original Q about clustered >indexes - thanks to all of you. >Dan Madvig (d-madvig@bethel.edu) said: >> If you leave it chustered, then every time the index changes >> the engine has t…
Data Replication
TGIF, everyone! I will be attempting soon to setup two servers, a PRIMARY and a SECONDARY that will replicate each other. To be honest, have no idea where to start, so I thought I would start with the vast majority. I have two Solaris 2.5 machines that at this time are running …
Re: ** FOR IMMEDIATE RELEASE - RECORD-BREAKING TPC-C RECORD!! **
performance is the least reason to choose oracle over sypbase, ingres, informix. even if sybase and oracle were the same, oracle is superior in so many ways that it defies description. consider the mass of client tools, media tools, internet tools, and the presence of "row level…
Re: ** FOR IMMEDIATE RELEASE - RECORD-BREAKING TPC-C RECORD!! **
Sorry...I can't resist... To paraphrase a certain executive: "We're faster, cheaper, better. Cool. Think about it. Then buy SYBASE." >For an apples to apples comparison consider the following: > > DBMS Platform CPUs TPC-Cs Cost/Transaction > ----…
Re: ** FOR IMMEDIATE RELEASE - RECORD-BREAKING TPC-C RECORD!! **
For an apples to apples comparison consider the following: DBMS Platform CPUs TPC-Cs Cost/Transaction ------- ----------- ------- ----------- ---------------- Sybase HP T500 12 5,600+ $390 Oracle HP T500 12 5,369 $535 …
** FOR IMMEDIATE RELEASE - RECORD-BREAKING TPC-C RECORD!! **
REDWOOD SHORES, Calif., Oct. 27 /PRNewswire/ via First! -- Today, Oracle Corp. announced a record-breaking TPC-C open systems benchmark, 9414 tpmC, surpassing the existing performance record, also held by the Oracle7 database. Oracle7's new record is more than two times faster …
Re: Care and feeding of OnLine
Okay, I was hoping that by being vague, I would get a wider range of responses. I see now, though, that I was too vague. I'll try again to get the ball rolling. What my client-oriented customer is looking for is some simple steps they can perform to keep their OnLine da…
Re: VLDB - for real?
What is a VLDB? Used to be 10GB, now it's 100GB, soon it will be 1TB. And the Intel 8086 used to be an adequate processor for most end-user computing. It's all relative. There's probably a corallary to Moore's Law in regard to database size. About the same time that Informix ann…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Re: Clustered Indices
In article jql@ixnews3.ix.netcom.com, tcummins@ix.netcom.com (Tim Cummins) writes: >In <3p6toh$ojl@cssun.mathcs.emory.edu> phr@fmsc.com.au (Peter Harris) >writes: >> >>I have RTFM but I am still a tad mystified, when do you use clustered >>indices and when do you avoid them? what…
Re: adjacent row delete bug
} From: kwa@mtatm.mt.att.com (K.ANDERSON(MT5756)XXXX) } [...] } We are now seeing the problem with NON-adjacent rows. I am assuming we } are banging up against another bug. } } Does anyone know a another like bug ?? } Maybe it's not a bug. Are you using the default page lock mo…
Data deletion in Informix
In Message-Id: <3d3v5v$lkc@raffles.technet.sg> sgs@technet.sg (Alan Chen) writes: > If I have done a mass deletion on tables, when I do a tbstat -d , I don't see > the space being free up. Is it the space was free logically but not > physically ?? The space is still allocated f…
Re: What affects performance?
In article <CqsC5J.H96@rosebud.strinc.com> amw@rosebud.strinc.com (Allen M. White) writes: >In article <2sk35o$80v@goshen.connected.com>, >Kurt Schmidt <slores@goshen.connected.com> wrote: >>In article <Cqq0no.9x9@boi.hp.com>, Jack Parker <jparker@boi.hp.com> wrote: >>> >>>But mo…
Re: What affects performance?
In article <2sk35o$80v@goshen.connected.com>, Kurt Schmidt <slores@goshen.connected.com> wrote: >In article <Cqq0no.9x9@boi.hp.com>, Jack Parker <jparker@boi.hp.com> wrote: >> >>But more seriously, Paul and the other posters made some very valid points. >>What the original reques…
rootdbs corruption with Online 5.01
Does anyone have experience of rootdbs corruption in the following environment when the system is rebooted (/etc/reboot or power fail) ? Platform: HP 9000/715 Operating System: HP-UX 9.01 Informix-Online 5.01.UD3 The rootdbs (170MB) was stored on a raw partition of a 525MB disk…
Re: What does sysindexes.clust contain?
graeme@pyra.co.uk (Graeme Sargent) writes: : Who can tell me what the numbers in the sysindexes.clust column mean? : : I realise that low numbers mean clustered and high numbers mean : unclustered, but what does (eg) 4000 mean? 4000 whats? Is 4000 : acceptably low or unacceptab…
What does sysindexes.clust contain?
Who can tell me what the numbers in the sysindexes.clust column mean? I realise that low numbers mean clustered and high numbers mean unclustered, but what does (eg) 4000 mean? 4000 whats? Is 4000 acceptably low or unacceptably high? If one wishes to write a utility which tro…
HDR and Blobs
IDS 9.4 on HP-UX 11.11 We have been trying to get HDR running, and we have blobs located in blob pages. The following pages from the Admin Guide make it clear that blobs in blob pages will not be replicated. It does not seem to say that you can't use HDR, simply that the blobs…