Oninit® Archive
Results for “BACKUP_FILTER”
Not enough room in ROOT DBspace
It looks like your physical log is taking up most of your space. I would imagine that this was moved and grown in your other instance. Dan -----Original Message----- From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of STEVEN AB Sent: Wednesday, January 04, 201…
Encryption/compression of backups
Look at the descriptions of the BACKUP_FILTER and RESTORE_FILTER ONCONFIG parameters in the Administrator's Reference manual and also read up about using the filters in the Backup and Restore manual. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) IIUG Board of D…
Encryption in ontape for version 11.5
Yes, it is possible. The keywords are BACKUP_FILTER and RESTORE_FILTER. Check out these in the "IBM Informix Backup and Restore Guide" manual. Using these mechanisms you can encrypt, compress, etc. Regards, Martin -- Martin Fuerderer IBM Informix Development Munich, Germany Inf…
External backups/restores and logical restoring of logs passed last Level-0 backup
Thanks Art. Yes, indeed it works. We have tested it with ontape, onbar and external backups. Logical logs are independant and you can restore older backups, or external backups, and restore logs passing other backups. Best regards, ------------------------------ Jose ------------…
Onbar: Failed to determine archive's encryption mode. Error code 2
Hello Jacob, I would allways make backup/restore with -w (whole system backup flag). You can verify this in the ixbar file if the 4th field is set to 1 and 2nd field contains the dbspace name. It is also impossible to mix backup/restore with/without whle system backup flag... May…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Restoring a table to PIT with archecker fails
Unfortunately, are correct - you can only do a physical restore if using a BACKUP_FILTER was used for the backup. Now, I seem to remember that may have been corrected in a later version of Informix, but I am not sure. ------------------------------ Mike Walker xDB Systems, Inc w…
restore through STDIO
Hi, use the BACKUP_FILTER and RESTORE_FILTER in config instead. This makes sense because you cannot forget any options when restoring (in a hurry ....). Make sure the options are correct for compressing/decompressing stdout/stdin. gzip needs -c argument or --stdout You can use gz…
restoring informix using the onbar command. problem
Which ixbar file ($INFORMIXDIR/etc/ixbar.<server_num>) are you operating on? Was this possibly also affected and had to be restored? Does it contain the backup you're hoping to restore? ------------------------------ Andreas Legner ------------------------------…
ontape does not finish the backup: tape full
Hi, I would consider changing BACKUP_FILTER (and RESTORE_FILTER) to a shell script which calls the compression program but appends stderr from that to a fixed file so you can see any error messages from the compression program. All, Where does the stderr of the BACKUP_FILTER/REST…
archecker utility on ontape level 1 archive
Hi Arjen, Are you first restoring level 0 and then level 1. As far as i know, Archecker refer the L0 backup as baseline and perform log rollforward restore until given time which is from L1 backup. Or you are directly restoring from L-1 backup? Regards, Gaurav -------------------…
HDR
The secondary MUST be OFFLINE when you do the restore (a COLD restore). The restore of the secondary must use the backup that was taken from the Primary, so the backup MUST be copied over to the secondary BEFORE you begin the restore. Basically it should be similar to the followi…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
verifying ontape archives with archecker
I don't recall why, but I recall being told there was something that didn't work if you used BACKUP_FILTER/RESTORE_FILTER. Maybe it was the table-level restore? Or maybe it was output to STDIO? It was a few years ago, so maybe that restriction has been removed in later release…
ontape restore problem
A customer want to restore the data from the tape, the date of backup file is about 2002. and No one remember the informix version, How to know the informix version from the backup file? thanks for your help.…
how to change the default location of rootdbs
I think you should be able to do a cold restore from backup, and use the -rename option of 'ontape'. DG…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
How to Restore Level 1 backup after level 0
Hi, let assume, today is Friday and i have level zero backup of Monday and level 1 backup of Wednesday. Now i restored Level 0 backup on an instance via ontape -r, it was done successfully.Now i also want to restore level 1 backup. How is it possible? to restore level 1 backup a…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
BACKUP_FILTER
Hey everyone, I am running RHEL 6 Linux with Informix 11.70. I would like to use the backup filter to encrypt my backups to file system. I am told the there are free encryption products already installed on Red-Hat, can any one tell me what they are? Specifically what would I rep…
Retoring the onbar backup
Hi friends, I want to restore our onbar backup from linux server to windows server, our onbar backup is scheduled through OAT.what is the procedure to restore?. Please help me on this. Thanks…
Re: script for ontake backup in multiple files
Why to multiple files? Use 'ontpae -s -L $level -t STDIO > outfile' and save all the echo '0\\ \\ \\ ....', mounting, touching, chmod'ing and chown'ing. Could then split outfile if required - for whatever reason. Could also compress outfile while creating: ... -t STDIO | gzip…
Archecker single table restore compressed ontape
Your backups are likely good - I don't think that using BACKUP_FILTER is the quite same as piping the backup through gzip, so you can't expect to unzip it. archecker will work with an archive which was made using BACKUP_FILTER. The only problem that I have had is doing a point-i…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Secondary stuck in Fast Recovery
Ok, well I think I read in the Backup and Restore manual that you can from the primary, run a backup and send it over to the secondary and restore it at the same time possibly so this is a good excuse to try that. I will read up on that to see if I have that correct or not, and i…
Archecker logical table-level restore on 11.70.FC7
Sorry, not AC_BACKUP_FILTER - I just meant BACKUP_FILTER in the onconfig. -----Original Message----- From: Mike Walker [mailto:mike@advancedatatools.com] Sent: Wednesday, September 13, 2017 10:33 AM To: 'ids@iiug.org' Subject: RE: Archecker logical table-level restore on 11.70.F…
New Channel of Informix Server (Tech)
Hi guys There is a new channel of Informix Server in Spanish , enjoy It -Install , Backup , Restore , HDR and more. https://www.youtube.com/channel/UCVGD_IAhd0VGntXiSh_E6ew Best regards Luis devecua.com…
backup_filter gzip ontape duration llog backupsize
Dear Group, I've got informix 11.7 in heritage that did not have any logical log backups whatsoever. Furthermore it was running nightly full ontape backup, which lasted 1H and 10min and makes a file around 600GB. Since there is a disc capacity constraint the next night the backup…
Re: Restore a specific table from a ontape backup
Yes, archecker will allow you to restore a table to a point-in-time. If I remember correctly though there were some complications, like this wasn't possible if you use the BACKUP_FILTER when you do the archive, but that may be Informix version dependent. -----Original Message---…
Failed to recover the logs after restore
Thanks Art. I've restored from our backup and works good now.…
ISM restore problem
It appears that ism /onbar are not able to restore a recent backup from another machine this way. The new machine, not member of any domain, was not able to restore from a backup of about 620 files and a size of 1.2TB…
Backup/Restore Primary/HDR
Hi, We are running 11.70.FC7 on Solaris 11. We use onbar for informix backups. How does backup/restores work when switching from a primary to HDR (new Primary) server? Do I need to do another full backup when promoting an HDR server to Primary or can the logs being backed up by …
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
point-in-time restore
Oddly enough - it isn't the issue of the type of backup/restore (whole system versus "normal"). The engine continues to fall over with an assertion failure. Still working on it. Thanks - Mark…
Diffrences between ontape -l and ontape -l -C
My OS is RedHat 6.2 and IDS 11.7. I have some problems to restore the logical logs in the machine backup, If I use the command "ontape -l -C" the logical log are restored, but the chuncks are with inconsistent status. If I use the command "ontape -l", I can't repeat this command…
Ontape returning 0 even though the command failed
Hi, I would guess you are getting the exit code from the gzip (which does not fail for the amount of data passing). Try using a BACKUP_FILTER/RESTORE_FILTER instead, which is set in onconfig and used internally. Best regards, Marcus Haarmann ----- Ursprüngliche Mail ----- Vo…
restore question
Hi all, Is it possible to restore a backup from a 3rd party (Netbackup) into a new FS and get it the data from there using onbar?…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
ontape backup and restore
Hi, I'm running online ontape level 0 backup on my dataserver. The ontape begin at 7 PM and lasts 2 hours While this ontape is running, there are transactions running that modify datas in my instance at the same time. At 8 PM one transaction truncated data in a table called my_ta…
Re: archecker and BACKUP_FILTER
Just on the off-chance - was this problem ever resolved for IDS 11.7 and archecker?…
Onbar Backup
Hi, If I always do a level 0 backup using onbar, Do I need to backup the logical logs to do a restore? Thanks in advance. Enviado desde mi iPhone…
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
not enough free disk to restore
If the backup was created using ontape -t stdio, this should work. If the backup was taken using a file with a backup_filter, this is not working, since the file backup does not compress the whole file. Marcus Haarmann ----- Ursprüngliche Mail ----- Von: "SMITH JOHN" <daylight…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Restore individual dbspace with ontape
Is it possible to restore an individual dbspace with ontape using only a level 0 backup WITHOUT restoring any logical logs? I have tried using ontape -r -D dbspace, and also ontape -p -D dbspace. In both instances the dbspace is restored but left "down" (and I receive messages s…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
archecker and BACKUP_FILTER
Please excuse if asked and answered before: My BACKUP_FILTER AND RESTORE_FILTER in $ONCONFIG are set: BACKUP_FILTER /bin/gzip RESTORE_FILTER /bin/gunzip When I wish to do a restore to a "point in time" with archecker, I get the response as set out below. Is this then to say tha…
ontape restore failed code -1 errno 0
It looks like you compressed the archive using the BACKUP_FILTER set yo gzip. Make sure that the RESTORE_FILTER is set to gunzip to restore the archive. It looks like you have it set to gzip. Art On Oct 16, 2012 6:32 AM, "KLAUS BURGER" <edv@hatico.de> wrote: > Hello, > > we mad…
Re: Script for stopping/starting continuous logging?
Hi Sean. I notice that you had no response to this. I recommend using the built-in ontape to directory features available since IDS 11.10. Change TAPEDEV and LTAPEDEV to different dedicated directory paths (chown informix:informix and chmod 770), no need to restart Informix. Run…
ontape backup/restore
Hi, I have IDS version 10: 10.00.FC10W4 and 10.00.UC11 I want to setup two new DB servers with the same versions as above. Using the ontape backup/restore I will restore the original database to the new DB servers. The setup of the new servers should be identical to the old on…
ontape -r Problem
Vouching for myself, an ifx non-expert, could it be that 7.3 backup's are not compatible with 11.70 restore's? If they're not compatible, would an ETL be a viable alternative?…
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
Ontape backup and restore with stdio
Does anyone know or recall which version of IDS where "ontape backup and restore with STDIO" feature becomes available? Thanks. Kern --…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
RE: IDS 11.70.FC4 - two questions: encrypted backu
See below: Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) Blog: http://informix-myview.blogspot.com/ Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer, Advanced DataTools, the IIUG, nor any other organiza…
Informix restore question
You cannot do the restore that way. Ontape opens the archive file twice. Once to read the reserved pages which is uses to make sure that all of the chunk files exist, and to restore just the reserved pages to the root chunk. Then it closes the file, starts oninit with -r and reop…
ontape level zero format
... or you can use pigz (parallel gzip) for BACKUP_FILTER if you want to speed up level zero, using all CPU-s on server for compression data ... On 03.11.2011 19:59, Art Kagel wrote: > If you set the BACKUP_FILTER environment variable in the server's > environment or the environ…
reading: Bad file descriptor
I'm trying to restore an onbar backup that is done to disk does the error reading: Bad file descriptor in ism_watch refer to a corrupt onbar file or something else ?…
backup and restore
hello all we have a level 0 backup to disk from AIX 6.1 and were looking to restore on a Linux x86 (red hat) server, infromix version 11.50.FC7. error comes up as "Physical restore failed - function read archive backup failed code -1 errno 0" can this be accomplished between t…
BACKUP/RESTORE_FILTER
Okay, this was a lot easier than I made it. All you gotta do is place your entire string for both your BACKUP_FILTER & RESTORE_FILTER parameters inside a set of single quotes. Dan…
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
Request for BACKUP_FILTER archive times correction
Hello, my friends. IDS 11.50.FC8W3 and 11.70.FC2, both on linux_64 machines. I had to apply a backup and restore filter, and notice that my "onstat -g arc" times are not correctly updated. As follows: 1) onstat -g arc output Dbspaces - Archive Status name number level date log l…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ONBAR performance tuning
Hello All, Is there any way to tune the performance of backup/restore using onbar and ontape?…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Backup from HDR
Hi, We are using IDS 11.50 FC6 & FC7 on Solaris Sparc. Is it feasible/reliable to get cold/hot backup from HDR ? I have tried and got successful while taking/restoring backup from HDR. Thanks.…
RE: Archive using ontape with incryption
Yes, you can do this using the BACKUP_FILTER and RESTORE_FILTER parameters in the ONCONFIG file. We have tested this with compression and encryption and it works. There were some problems using archecker with archives that had been created using th BACKUP_FILTER in early 11.xx ve…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Logical log backup aborted (during ontape -r)
Art, I'm trying to restore an production database (backup done with ontape), in a test database (using ontape -r) and I've the messages in the online log Regards…
Re: Tip: ontape + gzip parallel compress
On Sep 30, 3:09 pm, Cesar Inacio Martins <cesar_inacio_mart...@yahoo.com.br> wrote: > Hi Nick, > > I just uncompress (with gzip and pigz) the file and checked with md5sum and archecker , don't execute the complete process of restore, yet. > > Check the IIUG forum :http://www.iiug…
TSM and Informix 11.10 on Windows
Hi, Is it possible to explain anybody the way that TSM and onbar are related? For example in a imported restore attempt I was not able to restore anything until I ran the q backup .... command (in a different command prompt window). Why that happens? What about in the case that…
database backup using commvault simpana
Hi, Is anyone in the mailing list using Commvault Simpana's backup solution to backup their informix databases ?. are there any issues with this product's backup/restore procedures and is it a reliable tool ? any inputs will be appreciated Thanks Savio Pinto…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
Applying logical logs after level 0 restored
Hi Everyone, I just restored the complete level 0 backup of informix 7.13 on hp-ux 10.01 in our development environment. At the end of restore, I didn't forget apply logical logs to the database. can anyone advise me to apply the logical logs on the database that I restored? P…
BACKUP_FILTER in onconfig
Hello, when I using BACKUP_FILTER in $ONCONFIG, parameter for "The tape block size, in KB, for backing up logical logs" is NOT LTAPEBLK, but it is TAPEBLK. Everything work fine (LTAPEBKL for logical log) when I turn off BACKUP_FILTER ... This is happening with ontape, with BAC…
RE: encryption on IDS 11.50.FC5 on Solaris 10
No, ontape expects that the BACKUP_FILTER will write to stdout and that the RESTORE_FILTER will read from stdin. Ontape opens the TAPEDEV file on stdin/stdout as appropriate and opens a pipe to the filter. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) IIUG Boar…
Encrypting archive with ontape
How do I ensure encryption of archive/restore using ontape (on IDS 11.50.FC5). I learnt that the config parameter BACKUP_FILTER, RESTORE_FILTER can be used. I am not sure how. If I set the filter values to /bin/gpg what keys would this use to encrypt and decrypt the archive. Not …
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
Table structure backup/restore
Hi All, How I can take the backup of table structure and all its data and how to restore that table including all data.We are using IDS 7.13 running on HP-UNIX 10.01. Thx,…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Compression
Hi, IDS 11.50.FC4 on solaris 10 I read: New Format for Backup Filters Backups have a new format for version 11.50.xC2 if they are performed with the ontape command using a filter specified by the BACKUP_FILTER configuration parameter. The new backup format is not backwards comp…
HDR with level 1 backup
Hi, Disk containing the log backups got run out of space. So some of logical logs were not backed up. HDR secondary got out of synch. We are trying to make the secondary node again the part of HDR, but because of insufficient logical logs we are unable to do so. We can take 0-lev…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
need to backup the individual database
Can i do a fake backup using onbar utility to avoid a forced level 0 backup after restore?…
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
Backup & Restore confusion
Hi, I'm a bit confused about backup and restore using ontape. Why do I need to take a logical log backup with ontape -a (log # 15) after a ontape -s -L 0? The full Level 0 archive says it contains the log # 15 but during restore I have to apply the logical backup also containing…
Error in TLR with Archecker
I've used the AC_TAPEDEV parameter and tried with another older archive file and getting the similar errors :-( I used ontape to backup directory feature and have set the onconfig parameter TAPEDEV to a directory. So when ever i run ontape -s -L 0 a level 0 backup file (file sy…
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Test Restoration failed
Finally i reinitialized the test instance and started the restore using ontape -r. But the restore which was suppose to finish in 7-8 hrs on this server (as tested many times before)is not running over 15 hrs and i can see in onstat -D that one complete chunk is yet to be restor…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
Command for a compressed ontape to filesystem
Hi, The answer is not a single command. See chapter 13 of the IBM Informix Backup and Restore Guide. YOu can get that manual at http://www.elink.ibmlink.ibm.com/publications/servlet/pbi.wss?CTY=US&FNC=SRX&PBL =G229-6361-00 . The technique is to set the TAPEDEV, BACKUP_FILTER and…
Restore backup and Archecker Failed...
Hi, IDS 7.31 FD2 HP-UX 11.00 first, sorry my poor english.. I tried restore a archive Level 0 and failed... When test the backup file with archecker , failed too... The backup file is create over file system: TAPEDEV /backup/L_backup TAPEBLK 1024 # Tape block size (Kbytes) TA…
Restore backup and Archecker Failed...
Hi, IDS 7.31 FD2 HP-UX 11.00 first, sorry my poor english.. I tried restore a archive Level 0 and failed... When test the backup file with archecker , failed too... The backup file is create over file system: TAPEDEV /backup/L_backup TAPEBLK 1024 # …
Re: Backup/restore compatibility
On 18 Feb, 22:09, Fernando Nunes <s...@onlinedomus.net> wrote: > Troels Arvin wrote: > > Hello, > > > On Sun, 17 Feb 2008 23:36:27 +0000, Obnoxio The Clown wrote: > >> This is what dbexport exists for. > > > Thanks - it looks like dbexport will be of use. And the dbexport word le…
parallel backup and restore w onbar
hello, In IDS10, using onbar, can I do parallel backup and restore on an instance that has no database transaction logging ? I think I should be able to, as long as I backup the logical logs and logs will need to be restored during a parallel restore. Is that correct ? ps. I rea…
Backup/restore compatibility
Hello, In the DB2 World, there is a (very annoying) constraint concerning backup/ restore: Data backed up on a big-endian host cannot be restored on a little-endian host, and vice versa. The constraint is very illogical considering that one of DB2's selling points is the possibi…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
Windows XP Registry
One way to backup the registry is to create a System Restore snapshot. System Restore returns your computer to a previous snapshot without losing recent personal information, such as documents, history lists, favorites, or e-mail. It monitors the computer and many applications fo…
Continuous log restore
Version IDS 10 I read in IBM's redbook for version 10 that continuous log restore can be used. I wanted to know the following: 1. Can onbar be used for backup and restore ? 2. What commands can be run to setup continuous log restore ? There is not enough information available a…
Fatal error in shred memeory creation
FYI - My UNIX Administrator has restored a system backup taken before the power failure and my Database server is now up and running.…
Restoring Level 1 Backup ONLY - INFORMIX 9.4
Dear All, I am trying to restore level 1 backup ( with ontape -r ) on a machine ( solaris 8 )on which I have a level 0 backup already restored preveiously ( while restoring I terminated restore at the point when level 0 was completed and system was asking for level 1, my idea wa…
Backup worked...restore doesn't...
Hi All, I was able to get my backup done the other day just using ontape -s -L 0, everything seemed just fine, total space of backup 497 GB. Now today I'm trying to restore that same tape onto another server. Informix has been installed, onconfig file was mirrored from original …
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
Allocation of the 80-90% of resources for dbexport
I'm use ext3 filesystem. I need this backup mechanism for restoring database on other sides/servers. Is it possible to allocate more resources for dbexport process namely?…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Informix backup & restore
We have an IDS version 10 installation containing a number of dbspaces. We have created a database on each dbspace eg dbspace1 database1 dbspace2 database2 dbspace3 database3 Is it possible to restore a database (eg restore its correspondig dbspace) to a point-in-time withou…
Ontape backup/restore to disk
Hello All, I would like to use the Informix ontape utility for both Level 0 backup/restore and transaction log backup/restore. Instead of using an external tape device, I would like to back it up to disk (files). Currently we are running IDS 7.31 on Sun Solaris 9 servers. To …
Backup Of Specific Tables
Hello All, Wondering if there is a way to script a backup operation for specific tables as opposed to an entire database? Our scenario involves backups being written to a tape drive. We would wish to backup a couple of tables to tape and then restore if a job to update said ta…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
restoring just from logical log tape
When I run 'ontape -r', it asks me if I want to restore from an archive tape (an 8mm tape) after restoring from level0 backup (a DLT tape). Is there any way to just go straight to that 8mm tape for restore and bypass the hour I have to wait for the level0 restore to complete befo…
Re: Upgrading to version 10 ontape question
"Table Level Restore (TLR) is based on a normal backup/archive. Normal backups/archives are platform dependent, therefore TLR also is platform dependent." That is not what John Miller III said to me at the Atlanta conference! Table level restore can restore to remote instances …
Re: Upgrading to version 10 ontape question
For a platform independent backup/restore use version 10 and table level restore to restore all tables from a level 0 archive. This is platform independent. Backup/restore will always be version dependent since each new version has more features. David.…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
HP Data Protector restore
Hello, How can I restore informix backup on other instance with Data Protect.…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
Restore Informix-Emc-Data Protector 5.1
Valeriano V.... wrote > I want to restore the logs until 13:45:00, with Omni Back > Data Protector v5.1 > > On the GUI of Omni Back Data Protector, I don´t see the > option for do this. > > What is the Unix intruction for do this ?? onbar -r -l -t <point_in_time> Read the Infor…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Backup on inst1 and restore on inst2
Hi all, I have 2 instances IDS 10 (inst1 and inst2) on the same machine Windows 2003. The 2 instances have the same configuration, unless DBSERVERNAME and SERVERNUM and the same structure. I would like to know if is it possible to backup the datas of the inst1 and make a restore…
ids10.force to drop a chunk
Can't onspace bring the chunk back online? Use onspaces -s <spacename> -p <path> -o <offset> -O Otherwise restore from a backup.…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Re: External backup/restore - an idea - comments please
Thanks Martin for these links. Extremely valuable information on EBR those who are reviewing their backup & restore process. Hari…
Copy more than one instance on a single tape in Informix IDS 7.31
Hi. I would like to knwo whether is it possible or not to backup more than one instance in Informix IDS 7.31 on a single tape for later restore all of them. I tried it but after each backup the tape is automatically rewinded and so the other backup superposes the first one. The …
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
ISAM error: illegal argument to ISAM function
A couple questions. How do you restore a dbspace from a point in time? I use onbar. Since it is no longer there & I took another backup since I dropped it, I can't just use onbar -r. I've tried restoring the entire instance from the backup but then I get error messages. Shou…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
ontape -r failed.
9.21 restores restore on 9.21 9.40 restores restore on 9.40 9.21 restores do not restore on 9.40 restore on 9.21 and then upgrade or dbexport on 9.21 and dbimport on 9.40 F. David wrote: > Hello, > I need help in restoring between different Versions of Informix. > We updated…
Restoring a level-1 backup at a later date?
Actually, I buggered up the timing calculations <fx:chagrin>. What I meant is that if we do a level-0 on the Friday night after the last user logs off then restore this to the new box this means the users are off for 7 hours for the backup and then 12 hours for the restore to the…
Restore from Level 0 Backup
With ontape, yes; with onbar, yes if you did a whole system backup, no if you used a parallel backup strategy. Take care. Clifton pamadeo@cespi.unlp.edu.ar wrote: Hi, in IDS9.21, is possible restore from backup without restore logs. When recovery starting, the process ask you …
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
HELP - RESTORE A TABLE
Can one table be restored from a backup created with ontape -L 0 (On version 7.31UD)?…
onbar -r -t "..." -p -w, recovery not successful
what is LTAPEDEV set to? "James Zheng" <james.zheng@gmail.com> wrote in message news:7d321437.0409011012.5f59cb7a@posting.google.com... > Database was backup in "onbar -b -w", but when perform point in time > restore, say if pick a time in between two full backups, only rootdbs …
ontape forma
Hello list. Does anybody know the format of an "ontape" backup? Can it be copied to another media and still be used for a restore? To be precise: we have an ontape backup on DDS3 format but we need DDS2 . Thanks Henk sending to informix-list…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Query on informix backup strategy
It depends what type of backup you are doing. With level-0 backup, there should be any problem. In case of incremental backup, it is recommended not to mix onbar and ontape. There may not be any issue with incremental backup too. But you cannot mix level-0 backup from one backup …
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
ONBar Restores and Tivoli Storage Manager
I am having problems with restores from ONBar via Tivoli Storage Manager (TSM). I can perform backups that complete fine according to the logs, and the verification using "onbar -v" reports successful with no errors. However when I go to attempt a restore, I get one of two situa…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Database Restore Error
Dear All, I was restoring an ontape backup of 7.31 ver and got the following errors. 1) In online.log file Aborting physical restore of ROOT DBSpace Aborted by client. Informix Dynamic Server Stopped. 2) On the Console: physical restore failed function archive backup failed c…
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
ISM on Aix
I am currently using TSM and a 3583 library to backup informix using onbar - I am trying to somplify the situation and am going to use ISM and backup to file space on a local SSA array and clone my backups to tape during the day onto an external 3580 LTO2 drive. Another setup I h…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
IDS 7.31FC1 restore problem
I am having a problem restoring level 0 dbspace backups . the restore starts and root dbspace gets restored but the system then appear to hangs while waiting for a checkpoint. please help…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Backup/Restore
Hello, We're running on AIX 4.3, ids 7.31. The backup of the system lasts for about 30 minutes, but the restore(on a duplicate test-system) lasts 3 hours. I heard that the restore may last 2 or 3 times the backup time, but 3 hours is too long. Nobody could find anything in soft-…
Can you back up a database using ontape ?
Is it possible to backup just a database as opposed to backing up dbspaces ? I want to only backup a database and restore it on another box. Is that even possible ?…
onbar error on openserver 5.05
when I backup small data ,backup and restore all are normal.…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
ontape -r
Hi, I am trying to restore a 7.21 IDS DB on a DS10 box. The problem is that the database was first running on a DS20 dual-processor machine. Now I would like to restore the DB from a backup to the DS10 uniprocessor machine. While the restore begans (ontape -r) the machine stalls.…
RE:informix log backups
HI, =20 I have a particular question about transaction logs which get backed up using ontape. =20 I know that you can do a... =20 Physical backup & restore (which is a backup/restore of a dbspace(s) or blobspace(s) Logical backup & restore (which is a backup/restore of a l…
HELP URGENT: Level 0 backup from system A (Solaris) to be restored to System B (SCO UNIX) - IS THIS POSSIBLE???!!!
Is there a way for a level-0 backup from a Solaris 2.5 Informix Online 7.x backup to be restored to an informix 7.0 instance running on SCO Openserver 3.0. We need to test the backup of System A to another place so we can perform some system upgrades confident that our backups a…
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Which Informix software to restore a database?
Hi all, I'm using ontape command to do backup our Informix server everynight but the Informix's ontape command only allows to restore the whole Informix engine or dbspaces. I'm looking for Informix backup software which allows to restore a single database of Informix Server. T…
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Remote ontape backup/restore
Does anybody know how I can do an ontape backup/restore using a tape drive on a remote server? Thanks in advance, John.…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Backup and Restore
Hi all, Does Informix support recovery of up to the last transaction? I was told Oracle did, ???, wanted to know if that was true and if so, does informix. Thanks in advance for the info. Marco Sent via Deja.com http://www.deja.com/ Before you buy.…
backup and restore
I create a demo datebase on dbspace1 and I backup the IDS with ontape -s and ontape -a then I drop the demo datebase when I restore with ontape -r -D dbspace1 online I find the dbspace1 is down but I can not online the dbspace1 with onspaces -s dbspace1 -p PATH -o offset -O sor…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
Re: ontape
Hi Keith, Informix always starts it restore using the Level-0 backup. If you have Level-0 backups from different dates. You can restore whatever Level-0 you want. Don "Lewis, Keith A." wrote: > When using ontape as the backup and restore mechanism can the database be > restor…
ontape
When using ontape as the backup and restore mechanism can the database be restored to a previous backup or can you only restore to your latest archive?? Keith A. Lewis The Timken Company lewis@timken.com (330) 471-4119 (330) 471-4034 (FAX)…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
Can Ontape restore a database?
Hi all, I run ontape level 0 backup every night but I feel stuck in restoring a single database of the IDS 7.30UC2. Does someone know an Informix Backup software which allows me to restore a single database as need it? Thanks in advance for any advise. H.V…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
On-line vs Off-line Backups
Sean Kelsey wrote: > I can't even believe I'm posting this, but I've exhausted all my arguments > for performing on-line backups over off-line backups specifically within a > 24 x 7 x 365 operation. Namely, > > On-Line Backups > > Pro's > > 1. The database backup will be consist…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
Help: Ontape Warm Restore
Also sprach "Bashar Chalabi" <bashar@ctl.com> : :Hello, : :IDS7.31 on NT4. : :I am trying to do a warm restore using ontape. I first do a cold restore :(not all DBSpaces), which works fine. I then bring the server online, and do :a warm restore of the remaining DBSpaces. After t…
ontape -r (restore error)
Hi all, I am perform test for the backup and restore by using "ontape" utility. But I am unable to restore it. I got the follow error: Physical restore failed - restore reserved pages failed The backup "onstat -s -L 0" is success completed but unable to restore. An…
Informix Backup with Omniback 3.1
We restore our Informix 7.31 database with Omniback 3.1. What is the right way to do full backups every night. When configuring Informix backup to Omniback, you must choose several options. Omniback manual says that "to select a whole system backup, click Backup all DbSpaces and …
Re: Confirm backups
From: "Tony Costa" <tcosta@bellatlantic.net> > >I am a bit concerned that the ontape -s backups I am running are infact >good >backups. How can a backup be confirmed to be a quality restorable backup? Restore it? :-) Archecker? __________________________________________________…
Confirm backups
I am a bit concerned that the ontape -s backups I am running are infact good backups. How can a backup be confirmed to be a quality restorable backup? -- tony.costa@usa.net "Every man dies, but not every man really ever lives" -Mel Gibson as William Wallace…
Restoring backup on other system
Yes it is possible. I have done this successfully on a UNIX system with onbar and networker. But there was some steps to do before the restore. INF-ONL 7.24; Reliant UNIX V5.43; Networker V4.? 0, scan (networker) the backup tapes on the restore system. Maybe you have to add the…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
backup and restore
Hi, I have an IDS 7.30 on Solaris 2.6 with 5 databases. Which is the best method to backup and restore the databases. I need to restore the databases separately.…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
move dbspace/chunks on NT
Is there any way other than backup/restore to move a chunk on NT to another disk. Can I move the root dbspace this way? TIA,…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
Backup and Restore
Hello All- I am new in the Informix world. I've inherited an Informix database system with little documentation. One of the first things I'd like to do is know the procedures to backup and restore. The Informix version is 7.3. Is there something out there in print or someone…
Ontape -r failed
I am trying to do a restore of a level 0 backup. It is failing with an error "Physical restore failed - [db_sort ] Invalid DBspace list. I am getting this error eventhough the dbspaces and ids on the backup tape matches exactly to the dbspace list in onmonitor. Any ide…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
backup / restore
Hi I have on my IDS 7.30 for solaris 2.6 5 databases, which I want to backup and restore separately. Which ist the best method ? Thanks…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
ontape
Well.... You ONLY performed a level 0 backup so you CANNOT restore a level 1 backup because you do not have any level 1 backup that corresponds to the level 0 you have already restored. So? So reply 'n' no 'y'! Art S. Kagel Andreas Lommel wrote: > > Hi > I backuped my system …
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
Backing up tables or complete databases ?
Hello, Is it possible to make a backup from a table in one database to another (backup)database (by VB sourcecode) and restore earlier made backups ? Can I even make a backup of the complete database and also restore it by using VB-code ? I like to make an button which the use…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
onbar question
I am a little confused regarding the difference between a whole-system backup and a dbspace backup which backs up all dbspaces. If all my disks get blown away, can I use my dbspace backup (all dbspaces) to rebuild the database, or must I have a whole-system backup to recover? Th…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Backup/Restore Question
Hi all, Is there backup/restore system in Informix Online DS where I can restore an individual table, not complete dbspace? Thanks in advance.…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
RE: Backup and Restore Question
SQL Bactrack (a product from BMC) provides the functionality of restoring a single table from the backups. We tried it and it actually worked. - Sri Chava -----Original Message----- From: -=Eclypse=- [mailto:eclypse@cdc.net] Sent: Tuesday, November 17, 1998 3:26 PM To: informix…
Backup and Restore Question
Is there a good plan with Informix (we use BaaN as our app) for backing up and restoring individual tables/dbspaces? I've mentioned this to a couple of people. When we set up our new server, we're going to create a larger number of individual dbspaces so that we can restore them …
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Re: Restore to previous Zero level
There are two parts to this questions: 1. How to I get a previous archive to restore, onbar by default choose the most current? You will have to add into you restore command line a "-t <date/time just after the level 0>" If you do not …
Restore to previous Zero level
Hi, I'm using want to restore my informix database to the previous level zero backup. So for example I've done a level 0, some level 1's and another level zero backup. I now want to go backup to the first level zero backup. I'm using onbar to do both backups and restores and als…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Appending to Informix backup
Hello. I need to append a NT4.0 backup on top of Informix database backup (using ontape ) tape. Does this override the existing informix backup. If not, will the ontape be able to know where to restore it's previous backup? TIA, Aik Khoon…
Appending to Informix backup
Hello. I need to append a NT4.0 backup on top of Informix database backup (using ontape ) tape. Does this override the existing informix backup. If not, will the ontape be able to know where to restore it's previous backup? TIA, Aik Khoon…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Re: Backup & Restore
Mike Morris wrote: > > We have a new informix database based application and we were following > the vendor's backup and restore procedures (as best we could) and we > have run into a few problems. > > First, what we did: > onmode -k (offline?) I don't see any need to do this - …
Backup & Restore
We have a new informix database based application and we were following the vendor's backup and restore procedures (as best we could) and we have run into a few problems. First, what we did: onmode -k (offline?) ontape -s (archive level 0 backup, no logs) drop a user table ontap…
free: Backup - Restore Seminar
This was posted with unlicensed software. Please encourage the user to register this software begin 644 seminar.html M/$A434P^#0H\\2$5!1#X-"B`@(#Q-151!($A45%`M15%5258](D-O;G1E;G0M M5'EP92(@0T].5$5.5#TB=&5X="]H=&UL.R!C:&%R<V5T/6ES;RTX.#4Y+3$B M/@T*("`@/$U%5$$@3D%-13TB1T5.15)!5$]2…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Free Backup and Restore Seminar!
Target Audience: IT, I/S and CIO professionals concerned with the backup and restoration of their mission critical data. Seminar Description: This Seminar will address a growing concern among IT professionals in the area of backup and restore and define EMC's highly automated E…
Free Backup & Restore Seminar!
Target Audience: IT, I/S and CIO professionals concerned with the backup and restoration of their mission critical data. Seminar Description: This Seminar will address a growing concern among IT professionals in the area of backup and restore and define EMC's highly automated E…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Ontape - Any way to verify if the level 0 backup is any good?
Hi there, Is there any way to tell if your level 0 backup (ontape -s) or continous backup ( ontape -c) is any good. Basically is there a way to verify the data is readable without restoring it. thanks, Pat Militzer pmilitzer@ultracom.com…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
verifying a (ontape) backup
Is there any way to verify the contents of a backup tape (used ontape for the backup) other then doing a restore? Chuck Wrobel Bellevue School District…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
RE: Backup/Restore times
I have been experiencing a strange problem with backup and restores using ontape and onbar on my HP box. I have a small test database of 300Mb on a HPUX 10.20 box running 7.23 of Informix. I can backup the database in 5 mins but it takes 23 min to complete physical recovery and…
Informix Level-0 (restore ?)
RE: Informix backup/restore, DLT4000 tape drive, HP70, HPUX9.04, Informix 5.3 Tape Device [/dev/rmt/3hc ] Block Size [64 ] Kbytes Tape Size [30000000 ] Kbytes Our Level-0 backup use to take 10 hours (DDS), we now have the DLT4000, Level-0 backup =3D 2 hours. On …
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
OnLine 7.2 3rd Party Backup / Restore Utilities
I have been using ontape to backup my database for about a year. I only have 1 (about 2GB with 300 tables) and I do a full backup every night onto DAT. The problems I have: - I cannot restore one table only. - I cannot "verify" backups (perhaps by restoring one table) - I cann…
Re: Backup and Restore Help!!!
Neal Leitner wrote: > My problem is: I want to backup my On-Line database each night to tape > and be able to selectively restore tables if needed. Ontape does a good ........... > I thought about a dbexport, but my users complained each night when I > kicked them off the syste…
Re: Backup and Restore Help!!!
Neal Leitner wrote: > My problem is: I want to backup my On-Line database each night to tape > and be able to selectively restore tables if needed. Ontape does a good ........... > I thought about a dbexport, but my users complained each night when I > kicked them off the syste…
Re: Backup and Restore Help!!!
Some salient issues for this debate: 1. onunload/onload do not support fragmented tables. 2. Why do you want to restore individual tables? If using OnBar (with 1 table per dbspace) then be aware that: a) you can only restore dbspaces that are 'down' (i.e. you c…
RE: Backup and Restore Help!!!
David, ONBAR system doesn't allow backup and restore operation at the table level. But you can backup and restore and the DBSPACE level. If you fragment your table you can backup and restore and the partition level ( That sounds good but it is still at the DBSPACE le…
RE: Backup and Restore Help!!!
Neal How about onload(tbload) and onunload(tbunload)? I haven't used it very = extensively but you can restore specific tables within a database if you = want to, and it is faster than dbexport/dbimport. I am not sure if you = need to kick your users off when you do it, but I ex…
Re: Backup and Restore Help!!!
Neal Leitner wrote: > > I have a problem, which I thought was a simple one to fix, but after > consulting with Informix, there is no current Informix utility to solve > my problem. > > My problem is: I want to backup my On-Line database each night to tape > and be able to select…
Re: Backup and Restore Help!!!
In article <33C6AC29.411B@netcomuk.co.uk>, Neil Truby <ntruby@netcomuk.co.uk> writes >Neal Leitner wrote: >> >> I have a problem, which I thought was a simple one to fix, but after >> consulting with Informix, there is no current Informix utility to solve >> my problem. >> >> My …
Backup and Restore Help!!!
I can think of 2 ways to work around this problem: 1. You can redo your production database to place the target restore tables each in their own smaller dbspace. You can then restore at the dbspace level. 2. If you have the luxury of a test box, restore your produc…
Backup and Restore Help!!!
I have a problem, which I thought was a simple one to fix, but after consulting with Informix, there is no current Informix utility to solve my problem. My problem is: I want to backup my On-Line database each night to tape and be able to selectively restore tables if needed. …
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Individual database backup/restore
Does anybody know what the best way is to is the setup Informix so that I can individually backup and restore databases on an Online 7.14 UD1 engine is without restoring the other databases as well. I have about 20 or 30 databases and splitting them up into there own dbspaces is …
Re: ONBAR (backup and restore)
Are you doing your archive to a single dat device? Do you have spare disk drives laying around? When I was confronted with this problem I created multiple archive directories on cooked drives. Then I defined multiple dbspace groups for my archive and ran it in parallel. Then I…
ONBAR (backup and restore)
Anyone using Online DSA v7.2 onbar for backups on an hpux10.10 server? Am interested to know what third party vendor you interface with. What backup devices are you using? What kind of performance are you getting? I am currently running onarchive and ontape for level 0 archives t…
Backup & Restore Granularity
I am fairly new to Informix admin. I was surprised (and disappointed) to learn that On-Tape, On-Archive (and, I believe the up-coming On-Bar) back up and restore only at the dbspace level. WHY NOT AT THE TABLE LEVEL? If a user is in dbaccess, it is frightlenly easy to drop a tab…
verify that backup tapes are good
I have a customer who has had some problems recently with backups that can not be restored for various reasons. Are there any products that will perform a backup and then read the tapes to see that they are correct? Many Thanks, Cecil Broom broom@best.com…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Restore life database backup to testing database
Dear Sir, Our informix Online Engine is version 5.0 and using raw disk device. We try to restore our life database backup to testing database so as to fix a program bug. When restore start, the online engine restore the backup to life database again since the system restore acc…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
Re: ?: Table Restore/Backup :?
In <1993May10.141515.1374@mnemosyne.cs.du.edu> aburt@mnemosyne.cs.du.edu (Andrew Burt) writes: >I wasn't making myself entirely clear: The restore should then restore >only those pages that reside on the dead chunk. So if table A lived on >chunks 1, 2, and 3, and chunk 2 went …
Re: ?: Table Restore/Backup :?
->From: ijk@cbnewsh.cb.att.com (ihor.j.kinal) ->Subject: Re: ?: Table Restore/Backup :? ->Date: Mon, 10 May 1993 14:13:01 GMT ->Reply-To: ijk@cbnewsh.cb.att.com (ihor.j.kinal) ->Organization: AT&T -> ->> Maybe I'm being simplistic, but wouldn't it make some sense to address ->> t…
Re: ?: Table Restore/Backup :?
Andrew Burt writes: |> |> Maybe I'm being simplistic, but wouldn't it make some sense to address |> this issue? Regardless of mirroring or raid5 type recovery ability, |> Informix still *ought* to provide a way to rebuild a table or all tables |> on a chunk that goes down. It s…
Re: ?: Table Restore/Backup :?
In <1993May10.095816.15007@pyra.co.uk> graeme@pyra.co.uk (Graeme Sargent) writes: >In <1993May8.140157.9963@mnemosyne.cs.du.edu> aburt@mnemosyne.cs.du.edu (Andrew Burt) writes: >>keep >>track of which chunks a table is on (kept redundantly on different chunks); >>if a chunk is…
Re: ?: Table Restore/Backup :?
> Maybe I'm being simplistic, but wouldn't it make some sense to address > this issue? Regardless of mirroring or raid5 type recovery ability, > Informix still *ought* to provide a way to rebuild a table or all tables > on a chunk that goes down. It sounds simple to me: Have i…
Re: ?: Table Restore/Backup :?
In <1993May8.140157.9963@mnemosyne.cs.du.edu> aburt@mnemosyne.cs.du.edu (Andrew Burt) writes: >Maybe I'm being simplistic, but wouldn't it make some sense to address >this issue? Regardless of mirroring or raid5 type recovery ability, It depends on how you define the issue. H…
Re: ?: Table Restore/Backup :?
In <1993May7.121212.23160@pyra.co.uk> graeme@pyra.co.uk (Graeme Sargent) writes: >In <1993May05.131535.949@sco.com> chrisw@sco.COM (Christopher J. Wood) writes: >>Is it possible to perform table backups/restores with >>Informix? >No. 6.0 is reputed to have dbspace level backup s…
Re: ?: Table Restore/Backup :?
In <1993May05.131535.949@sco.com> chrisw@sco.COM (Christopher J. Wood) writes: >Is it possible to perform table backups/restores with >Informix? No. 6.0 is reputed to have dbspace level backup support. >For example: if I'm running Informix OnLine and >multiple databases over …
Re: ?: Table Restore/Backup :?
Chris, This will be available when OnLine 6.0 (scheduled towards end of '93 I believe) is released. With 6.0 administrators will have the ability to backup/restore at the dbspace level. Since you can specify which dbspace you wish to create a table or database in, you could cr…
?: Table Restore/Backup :?
Hi, Is it possible to perform table backups/restores with Informix? For example: if I'm running Informix OnLine and multiple databases over multiple disks, would I have to restore the entire database to recover from one (1) disk going bad? Ideally I could simple restore the pa…
table backup/restore question
I tried to post this article yesterday however I doubt it made it outside our site since our news system is flakey. Sorry if this is a re-post. I would like to be able to backup/restore a database table to/from a tarfile (actually any type of file but a tarfile is preferred). …