Oninit® Archive
Results for “DS_NONPDQ_QUERY_MEM”
onstat -g seg reveals several virtual segments many show a pool summary of 17184.H.sd
Stuart: Yes, RALLOC_MODE is a diagnostic setting only used temporarily on advice from tech support to help them diagnose specific suspected memory issues. It has been known to cause memory allocation issues of its own in the past. You should unset that. Art ----------------------…
Announcing the passing of Stuart Litel
Stuart. J. Litel passed away on April 19, 2025 at his home in Waban, Massachusetts. Stu was the beloved son of the late Joseph and Barbara E. (Sulkin) Litel of Newton, Massachusetts. Robin Chapman was his loving domestic partner for 20 years in Waban. He was a dear nephew to Barr…
Changing DBSPACETEMP run-time
Hi, IBM Informix Dynamic Server Version 11.70.FC5XE Please, is there a way to change DBSPACETEMP for a session inside 4GL? ------------------------------ Sincerely, Dennis ------------------------------…
Question of dostats
Yes. Many dostats rune used two connections egging you cannot do over a shared memory connection. There is an option to use a shared memory connection but then you can only process one database per run. Art ------------------------------ Art S. Kagel, President and Principal Con…
What prevents a RSS to roll forward as fast as its primary?
Your RSS has less memory and fewer cores. It is no wonder why the secondary cannot keep up with the activity on the primary! Are the ONCONFIG settings identical? If not, more reason why it falls behind. Arr ------------------------------ Art S. Kagel, President and Principal Con…
Informix HA Cluster and CM
OK, here's how it goes. You have two servers, a primary and an HDR secondary, call them node1 on host1 and node2 on host2 and you have a single Connection Manager, call it CM1 on host3. The servers each have a TCP and shared memory connection type defined, call them node1_tcp and…
Want to DROP an empty rootdbs chunk
David: No worries. Except for the catalog tables and a handful of others, nearly all of the "tables" in sysmaster are not actually tables at all, but windows in to memory structures which cache on-disk structures. Those, like the chunk table, dbspace table, etc. are what are upda…
unable to select, delete the data and unable to drop the table, response says Long transaction detected
Suresh: You do not have enough logical logs defined. Any transaction or combination of transactions that span more than the percent of logical log space documented in the LTXHWM parameter in your ONCONFIG file will trigger the oldest of the open transactions to roll back with a L…
Memory issue on Informix primary server
Amit: Casey's right, it looks like most of the memory allocated is unused. I had missed that. Here's what I think happened. As I said Solaris is VERY SLOW to allocate shared memory, so when a session needed more memory the engine requested another 3GB segment. It took so long tha…
flags (onstat -g ses)
That's the same set of flags as in ' onstat -u ' I'd say. For a session having multiple threads (PDQ), the 'P' thread would be the primary (sqlexec) one. ------------------------------ Andreas Legner ------------------------------…
Shared Memory
Yes, I would increase SHMVIRTSIZE as long as you are confident that the additional 4GB of memory that were added are "normal" and would be allocated again anyway if you didn't increase it. If the additional memory was an anomaly due to some unusual activity, then maybe increase i…
monitoring session memory
Try this one: > select memused, memtotal from sysscblst where sid = 503; memused memtotal 252728 266240 1 row(s) retrieved. Slightly different from the onstat output, but consistent: onstat -g ses 503 | head -7 IBM Informix Dynamic Server Version 14.10.FC5DE -- On-Line --…
RE: Upgrade IDS
Thanks Art and Luis for the competent and quick answer. Now I know what happened and what I have to do. Have a good time. Heinz WESTFLEISCH SCE mit beschränkter Haftung, Hauptsitz: Brockhoffstr. 11, 48143 Münster Amtsgericht Münster: Gen.-Reg. 448 Aufsichtsratsvorsitzender: Josef…
Upgrade IDS
I have encountered that error before, also during an upgrade to Informix version 12.10.XC13 ( from version 12.10.XC7 ). What I think that is happening is that there is a correction to the ph_threshold table, in the check constraints: DBSCHEMA Schema Utility INFORMIX-SQL Version 1…
YIKES! 12.x documentation for onstat -g opn does not match the output
ra column is the current readahead for the instance partp is the memory address of the structure that describes the tablespace i.e. partnum Cheers Paul > Hi Folks. > > I'm tyink I've managed to work around my ignorance of the sysmaster tables > in relation to onstat -g opn. Howe…
TOP 50 SQL Queries by CPU/Memory/IO
Informix Version : 12XC12 Operating System : Linux Hi all I am looking for tools or script that can give the the top X queries that utilize the most 1) CPU 2) Memory 3) I/O on daily basis. Talking to a support engineer for advise, the only recommended tools is InformixHQ whic…
ADO - activex data object
What do I require, to connect "ado activex data object" to Informix ? AIX 7.2 IBM Informix Dynamic Server Version 12.10.FC9W1 Regards Dirk…
PDQ mixed with OLTP
Thanks for the reply BENJAMIN THOMPSON sadly as per checking we have 1 fragmented table but it is not included in the batch process =( does this mean PDQ would probably not applicable? DS_NONPDQ_QUERY_MEM is the counterpart for non-PDQ queries correct? is it part of the SHMTOTAL …
Identifying types of temporary tables
Original post: Hi gurus, I want to catch de application that is consuming a lot of space of temporary dbspaces. I know there is no direct way to associate sessionid with use of temporary space. Moreover, there are temporary tables that are created internally by the engine. Do …
High CPU Utilization
Turn on SQLTRACE in low mode. Bear in mind this allocates memory from your virtual segment. Then use 'onstat -g his' to find any long-running or frequently run queries which are consuming a lot of time. HTH, Ben.…
SHARED MEMORY ALLOCATION
Note that DS_NONPDQ_QUERY_MEM is limited to 25% of DS_TOTAL_MEMORY. Neither DS_TOTAL_MEMORY nor DS_NONPDQ_QUERY_MEM are carved permanently out of SHMVIRTSIZE but are allocated from there as needed and released. I can alleviate Benjamin's fears. The total of DS_NONPDQ_QUERY_MEM u…
listener-thread@soc_be.c:3073: err = -25582:
Adding Version details Informix Version : IBM Informix Dynamic Server Version 12.10.FC6 O/S Version : Red Hat Enterprise Linux Server release 6.9 Thanks & Regards, Karthik Rajan…
Informix and speculative execution
Hi all, I have seen speculative execution patches for Firefox and SQL Server. Are there speculative execution patches for Informix in progress? There is no IBM Flash for Informix Dynamic Server and speculaative execution! Regards, David.…
DS_NONPDQ_QUERY_MEM not changing
Hi, and Happy New Year everybody I've tried to increase DS_NONPDQ_QUERY_MEM value because of CPU io wait issue . The performance improved since the value increased from 128 to 256 but I've set a much higher value. Still: [informix@server1 ~]$ onmode -wm DS_NONPDQ_QUERY_MEM=5124…
Is PDQ only for DSS?
I will agree with Fernando but add that there is one small pa= rt of the PDQ which has been adapted to OLTP. This is the amoun= t of sort memory an OLTP application can use, by default the amount of memo= ry an OLTP application can use before doing a disk sort is very small (I…
Rovoke insert permission but still can insert
I am doing it at the command line in the server directly in the directory C:\\\\Program Files\\\\IBM\\\\IBM Informix Dynamic Server\\\\11.50\\\\bin…
Long lasting dostats
OK, here's what's going on: - You didn't turn on PDQPRIORITY so the update statistics high command has to scan all 71 partitions sequentially. - You didn't increase the amount of memory allocated for sorting so it only has 15MB available to sort 5 columns of keys totaling 960…
IO performance issues
Michael: FWIW, your other post (with onstat -g mgm) doesn't tell us anything useful except that the server's been online for 11 days and 18 hours or 282 hours. Assuming you have not zero'd your stats since startup, I can calculate a rough Buffer Turnover Rate (BTR) across the tw…
Compacting a dbspace through onunload and onload
For ALTER FRAGMENT ... it will be much faster if you drop any indexes, do the ALTER, then rebuild the indexes w/ PDQ (and appropriate settings). Otherwise we have to maintain the rowids in the index(es) as the data rows move to new pages. Mark Scranton The Mark Scranton Group ma…
IFX_XFER_SHMBASE
Thanks to all that answered. The solution was to change this: BUFFERPOOL size=4K,buffers=100000,lrus=16,lru_min_dirty=20.00,lru_max_dirty=30.00 BUFFERPOOL size=16K,buffers=20000,lrus=8,lru_min_dirty=20.00,lru_max_dirty=30.00 to this: BUFFERPOOL size=4K,start_memory=200mb,memory…
12.10.FC6 Mac port released
IBM Informix 12.10.FC6 release for Mac OS is officially available! John F. Miller III STSM, Lead Architect miller3@us.ibm.com 503-747-1366 IBM Informix Dynamic Server (IDS)…
oninit taking ages
Hi all, before I post a PMR: did anyone see an informix instance take 25mn to start ? 25 minutes was with 12.10FC4 on a linux/red hat VMWare (big server according to the vendors) With 12.10FC5W1, i had to wait 46 mn before deciding to kill oninit. I am using huge pages and RESI…
Performance issue after migrate to IDS from Online
Hi, I looked through all your onstats. Some observations: 1. The values used for DS_TOTAL_MEMORY and DS_NONPDQ_QUERY_MEM are way too high. SHMVIRTSIZE 201376 DS_TOTAL_MEMORY 26214400 DS_NONPDQ_QUERY_MEM 1310720 16GB RAM So that's just under 200 Mb for SHMVIRTSIZE but 26 Gb fo…
opentable memory leak
Original post: No AUTOINDEX as far as I can tell. Turning off PDQ avoids the issue and I can live with this until permanent fix is found. Thanks, Andrew Response: It's a APAR in 12.10.xC5. APAR IT09544. The description talks about auto-index path, but the real trigger is an…
RSS/HDT Sec - Different Query Plans???
This took long enough but we have resolved this issue. DS_TOTAL_MEMORY was set WAY higher on the system with the poor query plan. We were not using PDQ but it affected this query anyway. IBM is putting a defect together to address the issue. thanx for all the replies, dan…
RE: moving database tables from one dbspace to ano
To add to Art's recommendations ... DS_TOTAL_MEMORY is a very important setting for maximizing use of PDQPRIORITY. It's the memory allocated for PDQ queries out of the virtual portion and guideline is 90% of SHMVIRTSIZE. The biggest benefactor of this is sort memory. Use SET EXPL…
RFE request for session details during virtual shm
Hello. I think this might be a very useful RFE, in order to help us to identify abnormal memory session usage, in OLTP systems of high ammount of concurrent sessions (ad-hoc applications). If anyone like, please vote it... https://www.ibm.com/developerworks/rfe/execute?use_case=…
IO Wait and PDQ
I have a session running against Informix 11.7 FC7 database. The SQL is running a join against 2 tables, each with 10 fragments a piece. 1 of these tables is stored under cooked chunks due to the sensitivity of contained data. The user specifies SET PDQPRIORITY 4 prior to startin…
RSS not working
-bash-4.2$ onstat - IBM Informix Dynamic Server Version 11.50.FC9 -- On-Line --…
Memory parameters and Workgroup Edition
Effectively MAX_PDQPRIORITY is already set to 0. On the DS_ parameters, wellllllllllllll, the ONLY effect that these have is that DS_TOTAL_MEMORY limits the setting for DS_NONPDQ_QUERY_MEM since the latter is limited to 25% of the former. DS_NONPDQ_QUERY_MEM is the only part of …
Informix upgrade
Can we upgrade informix from Dynamic Server Version 11.70 to 12.1 workgroup edition directly?…
Buffer Size and Use
Thank you for explanations. Could I summarize it like this? RESIDENT speaks to the O/S memory management, and does not affect Informix's management of the buffer cache. That is, the two are orthogonal processes. DG…
Problem with partiatly upgraded instance
Hi, I have a odd problem, i started this morning to upgrade ids 11.5 UC9x1 (sparc) to ids 12.1 FC2 (32bit to 64bit) , it went alright to the part when I fired up the 12.1 instance and it started to upgrade the old instance and run out of space in rootdbs and then crashed with a…
Optimising index builds
>> How are the tables fragmented? How much memory can PDQ 100% allocate? 1. Round-robin 2. I assume it is constrained by SHMVIRTSIZE, which is 24000000? Thx Neil…
when use IfxDataReader.GetIfxDateTime to NULL valu
Hello, The version of Informix products in my environment is: Database server: AIX IBM Informix Dynamic Server Version 10.00.FC5 IBM Informix CSDK Version 2.90 IBM-ESQL Version 2.90.FC4 Client: PC Windows IBM Informix-ESQL 3.70.TC5DE.…
Poorly Optimized SQL
Thanks David. I am ashamed to admit, but I am still a PDQ novice.…
Do not set the PSORT_NPROCS ?
OK, here's the skinny on PDQPRIORITY versus PSORT_NPROCS for index builds and update statistics as I understand it: - If you do not or cannot set PDQPRIORITY to a positive value (ex: Workgroup Edition does not allow PDQPRIORITY) the setting PSORT_NPROCS is the only way to get …
IDS 12.10 - dbimport very slow
Hi Markus, Is your import logged ? Regards, Henri MOUKOURI Le 25 juin 2013 à 10:45, "MARKUS BRINKBäUMER" <markus.brinkbaeumer@gmail.com> a écrit : > Hello, > > we have a new server (Windows 2012, 8 GB RAM, 4 x 600 GB SAS 15k HDD). On the > server we have installed an IBM Inf…
Temporary tables called th_overflow_ffffff
Ok, that means: a) I could review the queries and create indexes for reduce the amount of hash joins. b) I could increase the size the shared memory (SHMVIRTSIZE) so that the majority of hash joins are running in memory. Please tell me if this statements are correct Thanks in a…
ER network replication state
Hi Madison, that the problem is on the target would explain that we have the same problem on the 2 source servers. But why we cannot see anything on the receive queue? There was no spooling. Or 'full receive queueu' means only the memory queue has to be full to get this blocking …
light scans with update statistics
Roger: Several points: 1. The algorithm for LOW stats has been seriously improved in the latest release (12.10), so an upgrade might be a good idea. 2. You should not need to perform a LOW on the whole table if you are also performing MEDIUM and HIGH on selected columns. The…
Performance Tuning Discussion
Ok it seems you have a big hardware, what´s your Informix version? What´s your box architecture? For performance tips, there is a good article in Andrew Ford´s blog, that should clarify your thoughts.... http://www.informix-dba.com/p/informix-innovator-c-tuning-basics.html This…
DB_locale or local naming convention
Hi, I already mention the informix version. IBM Informix Dynamic Server Version 11.70.TC1IE…
Error -556 on @ reference
In IDS_A have a stored procedure do_some that has a insert into a local table. In IDS_B have a stored procedure do_some that does: call base@IDS_A:do_some(); Calling this sp works ok. In IDS_C i try to run: call base@IDS_B:do_some(); Fails with error -556 Cannot create, drop,…
memory free pct ?
Hi, have found this query for get the IDS free memory, first 2 terms shows ok, but i tried to add the third, i want the PCT (%) of free memory, but shows bad number: SELECT format_units(sum(seg_size)) as ifx_memory_allocated, format_units(sum(seg_blkfree),4) as ifx_memory…
Sql cost order by too hight
Just to start off with, it generally helps to include your version. I would consider increase DS_NONPDQ_QUERY_MEM and associated parameters. If this is a very large query you can consider running the= query under PDQ. John F. Miller III STSM, Embedability Architect miller3@us.…
Using PDQPRIORITY to throttle certain queries
Hoping to get some opinions on this. We have a public website that is currently using our main production database (IDS 11.50.FC6). The main query used by the website uses a single table that typically has 50K to 100K rows. The query typically completes in 0.4 to 0.5 seconds. …
SET PDQPRIORITY in an IF...THEN block?
All: I have some SP code that has a SET PDQPRIORITY N directive inside an IF ... THEN block that checks the application configuration table to see whether PDQ is enabled. Can anyone (Art, ideally) confirm whether or not this will actually work to control PDQ and will NOT use PD…
Config Help
Your biggest performance problem is that you are running your server on a VM. IO performance under VMWare is VERY VERY POOR and, as I've said several times already this month, databases live and die on IO performance. Art Art S. Kagel Advanced DataTools (www.advancedatatools.co…
Table order in joins for best performance.
Does the order of tables in a join statement make a difference for optimum performance and memory management? I heard that the last join should be the largest table.…
Use of fragmentaion for tables
If you fragment a table, say by expression, I know that using PDQ will result in the use of parallel scan threads. If your application (it is a third party app) does NOT use PDQ, is it still "useful" (better performance) to fragment tables? Will parallel scans still occur, or wil…
Help about PDQ
Where I put the command set PDQ priority in the application 4gl Thanks Wanderlei…
Re: Configure IDS 11.50 to avoid sorts going d....
On Wed, May 9, 2012 at 10:45 AM, FRANK <yunyaoqu@gmail.com> wrote: > Folks, > > IDS11.50 FC8 > > I updated the configuration parameter as following, > > #DS_NONPDQ_QUERY_MEM 128 > DS_NONPDQ_QUERY_MEM 4096 > > When I bounced my instance, it showed, > > [informix@franklin etc]$ on…
doubt about parameters (PDQ)
I need to know how to turn on and off the PDQ via application thank you very much Wanderlei - Intera Consultoria…
What are best onconfig parameters for a DSS app
Frank.... first question: Is your database installation being made for a production system???? Alexandre Marini IBM Informix Certified Professional v10 / v11.50 / v11.70 IBM Information Management Informix Technical Professional IBM Infosphere DataStage Technical Professional …
IDS 7.31 UD5 data(base) recovery
Informix Dynamic Server Version 7.31.UD5 I understood that IDS 7.31 entered End Of Support in September 2009 ( 2 and a half years ago) I hope this is not a business critical system…
Problem with identifying root cause of continual m
Ok. I think it probably some application problem. Could you check out if your Informix server is using OPTOFC=1 value? It should. I also suggest you to search for the JDBC connection string (or properties), for IFX_AUTOFREE parameter. It also must be turned on. Maybe that´s the c…
enterprise replication time to replicate data
IBM Informix Dynamic Server Version 11.50.FC6 Question for enterpise experts Does anyone know a command that will give me time that it takes to replicate data to a node? for example i update on server a and it replicates to server b . How long did it take? cdr view profile gives …
Aggregates
Over the weekend we migrated production to v11.70.FC4 from 11.50.FC5W2 ( OS HP-UX 11.31 ia64). On v11.70 some queries are running slow ( minutes compared to 2 secs in v11.50). SET Explain does INDEX scans on both, though different indexes are used in the subselect with the aggre…
DS_NONPDQ_QUERY_MEM and hash table
Hi, In the hash join, Do the hash table being stored in DS_NONPDQ_QUERY_MEM or other area in the virtual segment? if it was stored in the DS_NONPDQ_QUERY_MEM , the size of the hash table is large than the DS_NONPDQ_QUERY_MEM ? what the additional data should be stored? Is it in …
Issue on IMPLICIT_PDQ + BOUND_IMPL_PDQ features
Hello my friends. (Informix 11.70.FC2 on a linux_64 machine) I had configured our PDQ features (since 11.50) like this (onstat -g mgm output): Memory Grant Manager (MGM) -------------------------- MAX_PDQPRIORITY: 80 DS_MAX_QUERIES: 40 DS_MAX_SCANS: 1048576 DS_NONPDQ_QUERY_MEM: …
why phantom pdq message in wee hours?
This involves running IDS 11.70.TC1IE on Windows 2008 Server os. I see this each morning at the same time in the ids log file: 01:11:01 Warning: PDQ functionality is not supported in IDS Innovator-C Edition. The value of PDQPRIORITY cannot be set to 10. It is reset to …
Over 1,000 days of 24x7 database uptime!
On 29.07.2011 20:38 Lester Knutsen wrote: > From one of our customers, their Informix server hit 1,000 days today > .... congratulations;) > > IBM Informix Dynamic Server Version 10.00.FC8 -- On-Line -- Up > 1000 days 00:31:45 -- They beat mine just bit ... IBM Informix D…
SQL Tuning Assistance Needed
I will tell you that a new performance improvements in 11.70.xC3 is the ability to push down aggregates (specifically count/max/min). When doing sequential scans this pushdown allows the aggregate to be processed inline with the scan. This has a very drastic improvement on the pe…
why does DS_NONPDQ_QUERY_MEM have the prefix "DS"
In Informix Administrator's Reference, I see: Use the DS_NONPDQ_QUERY_MEM configuration parameter to increase the amount of memory that is available for a query that is not a Parallel Database Query (PDQ). My questions are: Now that DS_NONPDQ_QUERY_MEM is for NONPDQ, why does it…
Setting up HDR- First Time -11.70 Innovator-C
Hi, I am setting up HDR for the first time. onstat - on primary shows IBM Informix Dynamic Server Version 11.70.UC2IE -- On-Line (Prim) -- Up 0:11:5s onstat - on secondry shows IBM Informix Dynamic Server Version 11.70.UC2IE -- Fast Recovery (Sec) -- Up 00s onstat -m on sec…
ISAM error 197: Partition recently appended to
Informix Dynamic Server Version 9.40.UC5 SUSE Linux Enterprise Server 10 (i586) I have done a level 0 backup directed to /dev/null and tried again. still it is throwing the same error.…
Informix Warehouse Accelerator : Memory usage, nec
Hello, I have some questions to understand well the memory management with the IWA : 1/ How to compute the max available shared memory usage for IWA ? I found this formula with my tests : - MAX Available shared memory = SHMMAX * number of worker nodes If the result is greater…
slow statement
Ok. Now that we established that, you should take into account some of the other suggestions: 1- Is the full scan done on the proper table? 2- Would a hash join give better results? 3- Would a "customized" index prevent the creation of a sort file? 4- Should you use PDQ on that …
Question about STMT_CACHE
More likely it is because the data and index pages you query needs are not yet in cache after a restart. Art On Feb 24, 2011 4:08 PM, "SUSAN JONES" <sjones@clerk.org> wrote: > AIX 5.3 IBM Informix Dynamic Server Version 11.50.FC8 > > Hello, > We have a situation where a query th…
PSORT_DBTEMP
DS_NONPDQ_QUERY_MEM controls the in-memory sort size (and other things) when PDQPRIORITY is zero and DS_TOTAL_MEMORY and DS_MAX_QUERIES controls the in-memory sort size (and other things) when PDQPRIORITY is greater than zero. So, it MAY be that the sorting needed for this index …
Introduction to the three designer handbags(Chanel,Coach,Prada)
Due to an interrupted ontape restore, I was left with a down informixserver with its shared memory segments still being reported by ipcs. I carefully removed all the segments using ipcrm, being careful not to remove any used by the other two instances on the host, but when I rem…
Removing semaphore shared memory segment aborts other informixservers
Due to an interrupted ontape restore, I was left with a down informixserver with its shared memory segments still being reported by ipcs. I carefully removed all the segments using ipcrm, being careful not to remove any used by the other two instances on the host, but when I rem…
Tool to estimate the size of an index
Sorry, I forgot to provide the version of the installation: IBM Informix Dynamic Server Version 11.50.FC4 Operative System: AIX Version 6.1…
Config
BRIAN FOSTER wrote: > I am doing an intial tune for a new instance of 11.5 64bit. All of our > previous instances have been 32bit so I am unsure about my current shared > > memory config... do I have too many buffers? I am also wondering whether I can > safely add 1 or more CPU V…
Re: Memory Management
Neil Truby schrieb: > "Ian Michael Gumby" <im_gumby@hotmail.com> wrote in message > news:mailman.491.1283968374.1071.informix-list@iiug.org... > Fernando, > >>> More memory means you can do more things and yes... 2000 concurrent >>> sessions could be considered small. ;-) > With …
Re: Memory Management
Ian Michael Gumby schrieb: > > >> From: domusonline@gmail.com >> Subject: Re: Memory Management >> Date: Sun, 5 Sep 2010 23:32:32 +0100 >> To: informix-list@iiug.org >> > >>> Thanks all..great information. I agree that 6 Million is not really >>> that big since the big RDBMSs ca…
Re: Memory Management
Ian Michael Gumby schrieb: > > >> From: neil.truby@ardenta.com >> Subject: Re: Memory Management >> Date: Tue, 7 Sep 2010 21:44:37 +0100 >> To: informix-list@iiug.org >> >> "Ian Michael Gumby" <im_gumby@hotmail.com> wrote in message >> news:mailman.480.1283875344.1071.informix-li…
Re: Memory Management
Superboer schrieb: > Hello Fernando, > > I hate to disappoint you, however MS is not easy; try to restore a > complete level 0 backup, you will see what a can of wurms that is. > Besides that monitoring and trying to grab the hottest sql is not > easy(sqlsrv2005); the stuff desc…
Re: Memory Management
On Wed, Sep 8, 2010 at 6:52 PM, Ian Michael Gumby <im_gumby@hotmail.com>wrote: > Fernando, > > More memory means you can do more things and yes... 2000 concurrent > sessions could be considered small. ;-) > I bet you worked a lot with instances with much more than that... > W…
Re: Memory Management
On Wed, Sep 8, 2010 at 6:54 PM, Ian Michael Gumby <im_gumby@hotmail.com>wrote: > If I could talk about some of the stuff I worked on... yes ... memory can > be a concern. > > ;-) > > Honestely I do believe you. But unless those things used Informix it's irrelevant for the discu…
Memory Management
"Ian Michael Gumby" <im_gumby@hotmail.com> wrote in message news:mailman.491.1283968374.1071.informix-list@iiug.org... Fernando, >> More memory means you can do more things and yes... 2000 concurrent >> sessions could be considered small. ;-) With more memory you can do things l…
RE: Memory Management
If I could talk about some of the stuff I worked on... yes ... memory can be a concern. ;-) Date: Wed, 8 Sep 2010 13:03:09 +0100 Subject: Re: Memory Management From: domusonline@gmail.com To: informix-list@iiug.org On Wed, Sep 8, 2010 at 12:32 PM, Obnoxio The Clown <obnoxio@se…
RE: Memory Management
Fernando, More memory means you can do more things and yes... 2000 concurrent sessions could be considered small. ;-) With more memory you can do things like in memory database tables for fast response. More memory can be used for advanced processing. (Extensibility that most p…
Re: Memory Management
On Wed, Sep 8, 2010 at 12:32 PM, Obnoxio The Clown <obnoxio@serendipita.com>wrote: > Ian Michael Gumby wrote: > > > > need parallel processing? Maybe not. Do you need to go beyond 16GB most > > likely unless you have a really small system and support a small number > > of users…
Re: Memory Management
On Wed, Sep 8, 2010 at 12:21 PM, Ian Michael Gumby <im_gumby@hotmail.com>wrote: > > > > From: neil.truby@ardenta.com > > Subject: Re: Memory Management > > Date: Wed, 8 Sep 2010 08:55:11 +0100 > > > To: informix-list@iiug.org > > > > > >From the IBM website: > > Ultimate: US$38,…
Re: Memory Management
Ian Michael Gumby wrote: > > need parallel processing? Maybe not. Do you need to go beyond 16GB most > likely unless you have a really small system and support a small number > of users. What is "a small number of users", though? If your application is well-written (a big "if",…
RE: Memory Management
From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of Fernando Nunes Sent: Tuesday, September 07, 2010 11:19 AM To: informix-list@iiug.org Subject: Re: Memory Management >IDS can't take advantage of multiple indexes on the same query in any GA…
Re: Memory Management
On Tue, Sep 7, 2010 at 5:18 PM, Fernando Nunes <domusonline@gmail.com>wrote: > > > On Tue, Sep 7, 2010 at 5:02 PM, Ian Michael Gumby <im_gumby@hotmail.com>wrote: > >> Really. >> >> So what's missing from Growth that would want you to go >> Enterprise/Ultimate Ed? >> >> Datablad…
Re: Memory Management
On Tue, Sep 7, 2010 at 5:02 PM, Ian Michael Gumby <im_gumby@hotmail.com>wrote: > Really. > > So what's missing from Growth that would want you to go Enterprise/Ultimate > Ed? > > Datablades? > Table Partitioning? > > Can IDS support the use of multiple indexes on a table within…
Re: {Spam?} RE: Memory Management
Ian Michael Gumby wrote: > Really. > > So what's missing from Growth that would want you to go > Enterprise/Ultimate Ed? > > Datablades? > Table Partitioning? Memory and # CPUS for one thing. Unlimited HA nodes. Compression. Parallelism and partitioning. > Can IDS support the u…
RE: Memory Management
Really. So what's missing from Growth that would want you to go Enterprise/Ultimate Ed? Datablades? Table Partitioning? Can IDS support the use of multiple indexes on a table within a query like XPS can? From: art.kagel@gmail.com Date: Tue, 7 Sep 2010 11:55:18 -0400 Subject: …
Re: Memory Management
Growth Edition can have up to three nodes ER or HDR are both supported. No need for Ultinate Edition just for HA. Art Art S. Kagel Advanced DataTools (www.advancedatatools.com) IIUG Board of Directors (art@iiug.org) Disclaimer: Please keep in mind that my own opinions are my …
RE: Memory Management
> Date: Mon, 6 Sep 2010 17:19:32 +0100 > From: obnoxio@serendipita.com > To: informix-list@iiug.org > Subject: Re: Memory Management > > Ian Michael Gumby wrote: > > > > > > > From: domusonline@gmail.com > > > Subject: Re: Memory Management > > > Date: Sun, 5 Sep 2010 23:32:32…
Re: Memory Management
Ian Michael Gumby wrote: > > > > From: domusonline@gmail.com > > Subject: Re: Memory Management > > Date: Sun, 5 Sep 2010 23:32:32 +0100 > > To: informix-list@iiug.org > > > > > > Thanks all..great information. I agree that 6 Million is not really > > > that big since the …
Re: Memory Management
On 02-09-2010 20:24, shorti wrote: > On Sep 2, 12:06 pm, Andrew Ford<af...@networkip.net> wrote: >>> ok..then I will give you another chance to redeem yourself.....Can >>> anyone tell me what they think of Informix Performance for a larger >>> database...lets say 5-6 + million r…
Re: Memory Management
On 02-09-2010 18:47, Alexandre Marini wrote: > Ok, I can example this: our larger table has > Number of Rows 441.762.945 > > Our cpu idle times: > 12:30:01 PM CPU %user %nice %system %iowait %steal %idle > 12:40:01 PM all 3.39 0.00 0.39 24.61 0.00 71.61 > 12:50:01 PM all 3.08 0…
Re: Memory Management
On 02-09-2010 18:28, shorti wrote: >> >>> Thank you...this is exactly what I was looking for. >> >> I'm clearly losing my touch. >> >> -- >> Cheers, >> Obnoxio The Clown >> > > > ok..then I will give you another chance to redeem yourself.....Can > anyone tell me what they think o…
functional index - create with parallel sort
Cesar, Are you using PDQ in which level? How are the Parallel Database Query (PDQ) Configuration Parameters in your instance? You should use PSORT_NPROCS and PDQ >1, actually. In my environment to create indexes in parallel I usually use PDQ Priority High, but the MAX_PDQPRIORI…
Re: Memory Management
Ok, I can example this: our larger table has Number of Rows 441.762.945 Our cpu idle times: 12:30:01 PM CPU %user %nice %system %iowait %steal %idle 12:40:01 PM all 3.39 0.00 0.39 24.61 0.00 71.61 12:50:01 PM all …
Memory Management
Hello, I have another question. Again, new to Informix and just doing research for a Linux implementation. Is there a setting that can control the total database memory allowed for Informix to use for all databases and instances (not sure if instance is the right terminology fo…
PDQ and Growth Edition
On 12 Aug, 20:21, LIGHT SCANS <light_sc...@yahoo.com> wrote: > Hello Neil, > > Try putting your TEMPDBS in ramdrive. That should speed up the > sorting required to create an index. Also, make sure your swapping is > zero. > > Just for grins, I would try everything: Define tabl…
Can't access sysindexes remotely
Hi, We are using IBM Informix Dynamic Server Version 11.50.FC6 using Platform: SunOS 5.10 Generic_125100-09 sun4v sparc SUNW,Sun-Fire-T200 Thanks…
optimum usage of resources
By Increasing buffer size as mentioned in previous e-mails Regards, Vaibhav S Dantale ___________________________________________________________ Challenge is source of strength QA Manager, Informix Dynamic Server Information Management Address: IBM India Software Labs, Cell: +91…
Re: ERROR 770 on IDS 11.50 FC6
Hi Omar, I've had the same error, only on version 10, the cause could be completely different in your case. Here the cause was a stored procedure created with PDQ > 0 set in the environment. When the stored proc was dropped and recreated with PDQ = 0, the problem disappeared. H…
Whitepaper - In-Memory Analytics
Yellowfin has released its latest Business Intelligence Whitepaper, this time on "In-memory Analytics" * No signup or email handover required, just click the link or cut/ past into your browser. http://yellowfin.com.au/Document.i4?DocumentId=104879 Feel free to give us any fee…
Re: performance improvements for dbimport?
Make sure that you start with a clean system eq fresh created dbspaces (no initialized pages from prev loads to avoid unnessesary physical logging) Then i would maximize buffers , set lrumax and mindirty to 99 (so disable it!!) i would generate my own checkpoints using below: d…
Update Statistics
OK, older versions of Informix (7.xx, 9.xx) depended on the user's environment variable DBUPSPACE which controlled the amount of memory that IDS would allow a single session to use for in-memory sorting if parallel query was not enabled (setting PDQPRIORITY > 0 or running SET PDQ…
Performance degradation over a period
Hi, what do you mean by some period: seconds, minutes, hours, days, months ? Many indexes on the tables ? New tables/indexes, when the application starts ? Regards, Andreas > ------------------------------------------- SPAR Österreichische Warenhandels-AG Hauptzentrale A - 5…
Update statistics after the upgrade
A couple of points: - You can combine your #1 & #2 by running the LOW's with the DROP DISTRIBUTIONS clause included. - You can speed things up by combining all MEDIUM columns into a single command (as long as the statement is smaller than 64K) and all of the HIGH …
Random Server Slowdown "Redone"
There are some usual things you could do for now: 1) calc your database ratios, I think there are several NETTYPE, BUFFERS and even BTSCANNER options that could be optimized, you could download Mr. Art script to automatically know these important numbers!!! It´s on the download …
Doubt in Update statistics, resolution and confide
Hi Celso, Just for better understand , what update exactly have the performance problem? med ,high or both? what values of resolution/confidence used? The PDQ make all differ with update statistics high, use more memory and they intend to use light scan and avoid the indexes...…
Performance - Sun SPARC T2
Hi, maybe I can contribute a bit. A nasty decision this is, when you must go on with this. Good DBAs can do some miracles, but we cannot heal every wrong decision. This type of HW combination is nice for a lab dealing with 500 records, or if is runs some tomcat containers (not…
Informix Dynamic Server Software Downloads
It appears IBM has cleverly hidden the IDS downloads again on the Passport Advantage Website, at least from my prying eyes. I can find the Solid DB and the DB2 links just fine. Does anyone out there in IIUG-land with a Passport Advantage account know where IBM has stashed the dow…
RE: temporary dbspace usage
>I open pdq already. >set pdqpriority 100; >select ....; > >in the onconfig file >the parameters are setted >and ds total memory set 4G > >onstat -g mgm monitor the pdq use normally. Did you set environment PSORT_NPROCS? If not, try setting it to 3 or to 4. HTH, Paul M.…
TEMP DBSPACE Usage:
See my comments inline below: Art Art S. Kagel Oninit (www.oninit.com) IIUG Board of Directors (art@iiug.org) Disclaimer: Please keep in mind that my own opinions are my own opinions and do not reflect on my employer, Oninit, the IIUG, nor any other organization with which I am …
Too much IO Wait time
Art, thanks for your reply. I Change DS_NONPDQ_QUERY_MEM too 51240, also run dostats. And there is no change, all our queries that have to access a lot of rows takes too much time. Now I'm going to install Informix 11.5FC5 in my old server, and check if there's a problem with m…
Java prepared statement
Hi, there are two cases Case-1 & Case-2; Case-1: inserts/updates are prepared statements Case-2: inserts/updates are queries without parameter marker Now if STMT_CACHE is enabled then in what case memory usage will be high for a sessions. regards, Kamran…
temporary dbspace usage
I open pdq already. set pdqpriority 100; select ....; in the onconfig file the parameters are setted and ds total memory set 4G onstat -g mgm monitor the pdq use normally.…
Re: How to estimate query cost before execution
Turn PDQ on You can then limit the resources available to PDQ queries and even I think limit the number of PDQ queries that can run. This will mean that other queries and still run and your slow, complex queries will take even longer. I say bring back SCAFS!…
OPTCOMPIND and perl
Anyone know if I can change OPTCOMPIND after establishing a DB connection or does it need to be set before connecting? ta SLES10 SP1 IBM Informix Dynamic Server Version 10.00.UC5…
Re: Sudden Increase in Checkpoint Lengths
Keith Simmons wrote: > Ian > Yes, same place, same package but only two memory segments, Resident > and 1 Virtual, no change from last restart. In that case I'd have a word with the contract managers. If, for instance, daily invoicing is switched from daily to weekly, which i…
dbspaces temp full
Hi: I have 6 temp dbspaces and only one of them shows me that this used to 90%. The other shows that I used 10% alike. Remove all Informix users who are not and go on. Any suggestions. thank you very much AIX 6.1 Informix 10.FC10 # Parallel Database Queries (pdq) MAX_PDQP…
temp full
Hi: I have 6 temp dbspaces and only one of them shows me that this used to 90%. The other shows that I used 10% alike. Remove all Informix users who are not and go on. Any suggestions. thank you very much AIX 6.1 Informix 10.FC10 # Parallel Database Queries (pdq) MAX_PDQP…
Re: help with sessid
emaus wrote: > Hi all: > > MAX_PDQPRIORITY 80 # Maximum allowed pdqpriority > DS_MAX_QUERIES 20 # Maximum number of decision support queries > DS_TOTAL_MEMORY 4000000 # Decision support memory (Kbytes) > DS_MAX_SCANS 1048576 # Maximum…
Insert into an indexed table is really SLOW!
MIKE DUNHAM-WILKIE wrote: > I am running into performance problems inserting into an indexed table, using > Informix 11.50. The following timings for loading into > compressed/uncompressed, indexed/non-indexed tables using dbload/HPL-Deluxe > more illustrate the problem. The numb…
Connection manager parametrs
Thanks for following command: oncmsm -r <connection manager instance name> Web URL is no more valid I think: http://publib.boulder.ibm.com/infocenter/idshelp/v115/topic/com.ibm.adr= ef.doc/ids_adr_0116.htm We have two applications with very different load on databases (i.e.,TPS…
Informix Dynamic Server Scheduler question
Hi! I'm working on a project at my faculty. It's a java desktop application with an informix database. I have a problem using informix dynamic server scheduler. I have a particular table in my database. This table contains records that are inserted by the desktop aplication I'm …
Cognos query cuasing database crash.
Hi every body, We have a production server IBM Informix Dynamic Server Version 11.50.FC3W1. There is one Cognos query which is causing our database to crash. I am not asking why but I just want to know who is running it. I know that all the users using the same user name "cognos"…
Re: -208 Memory allocation failed during query pro
I've just had the same error, but it had nothing to do with amount of memory available! I had an SQL that was ordered by ROWID - removing the ORDER BY ROWID on the sql solved the problem.…
IDS 9.40 End of Support Imminent
I have seen a number of posts on CDI recently related to IDS 9.40 As per the announcement on September 7th 2007, effective on the dates listed below, IBM will withdraw support from the following product releases licensed under the IBM International Program License Agreement: 9…
fragmented table and pdq
In testing we want to play with testing of setting pdq to 5 across the board, we have always run pdq at - except when indexing or updating stats. What we found when pdq is set this sql does not stop at the first 5000 records. IDS is 11.5.FC3 Os is Solaris 10 set pdqpriority 5;…
Question about sysindexes.clust
Have you considered running PDQ with this process? -- Cheers, Obnoxio The Clown http://obotheclown.blogspot.com…
Re: Best Use of Free Memory
On 31 Oct, 00:49, "Kevin Cherkauer" <invalid_addr...@nowhere.com> wrote: > David, > > I see the confusion now. The English phrase, "Needs to acquire a buffer," is > too vague. There are really two major cases, but the manual is only > addressing one (the rarer one). The cases are…
Access Rows
The DISTINCT clause is forcing a sort with duplicate removal which is relatively expensive. One thing you can do would be to improve sort performance by enabling parallel sorting and tuning the sort memory by: - PDQPRIORITY set high enough to involve more than one CPU VP if you …
use stored proc that return multiple columns in a query
forgot to include version info: IBM Informix Dynamic Server Version 10.00.UC6W5 -- On-Line -- Up 207 days 22:14:39 -- 1441100 Kbytes…
installing informix dynamic server in linux
hi, I'm new to informix... I tried to install informix dynamic server(iif. 11.50.UC2E.Linux-RHEL4.tar) in my linux machine. I'm getting an error like this... One or more prerequisite system libraries are not installed on your computer. Install libpam.so.0, libncurses.so.5…
Meaning of DS_NONPDQ_QUERY_MEM
Dear All.... http://publib.boulder.ibm.com/infocenter/idshelp/v111/index.jsp I refered to this document of IDS 11.1 , and found the following statements: Use the DS_NONPDQ_QUERY_MEM configuration parameter to increase the amount of memory that is a available for a query that is…
PDQ and HPL
I just performed an HPL unload an re-load ona fairly meaty table. It took about 3 hours to re-enabled the indexes. Although I set PDQPRIORITY in the session that started the onpload, it didn't use PDQ. I then dropped and re-created the indexes again, this time through dbaccess…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
Informix Dynamic Server v 11.50 Developer's Edition
Does everyone know that the Informix Dynamic Server Developer's Edition v11.50 that you can download from the IIUG Web site (www.iiug.org) is NOT timebombed, is completely and fully functional (including HDR, MACH11, ER etc.). Do you know that the only limitations on this versio…
CONFIGURATION ONAUDIT-IBM Informix Dynamic Server
Hello, I need to configure onaudit and onshowaudit able to register for each of the consultations that are made to the database, either through dbaccess, ODBC or another application. I've been reviewing the IBM Informix Trusted Facility Guide, but I was not working. What param…
How to Store Table in RAM in Informix
> I want to know that is there any funtionality of Informix that would allow me > to store some of the tables in the RAM. SET TABLE ${TABLE} MEMORY_RESIDENT You can also set fragments of a table memory resident which often makes more sense. SET TABLE ${TABLE} ( ${DBSPACE}, ${D…
How to use Informix Dynamic Server
I have installed trial version of "Informix IDS Dynamic Server Developer Edition 11.5 for Windows 2003, XP, Vista, 32bit Version 1150TC1DE". But i am new to informix. Can anyone explain how to use IDS in detail.…
DYnamic SQL
On Tue, May 20, 2008 at 6:07 PM, Rajan S <srajan2@cox.net> wrote: > Hi guys: > Could anyone have a good working example of a ESQL program that would > dymamically execute a stored procedure using SQLDA with parameters known > only at the run time. > If you have could you please p…
Re: informix 9.3 to 9.4 issue
On 29 Feb, 13:05, Fernando Nunes <s...@onlinedomus.net> wrote: > TBP (The Big Potato) wrote: > > > What is happening with the memory?? > > > > Mem: 4149104k total, 4125452k used, 23652k free, 6220k buffers > > > 4125452k Used?? Could be a Linux funny s'pose > > Linux'…
DW query tuning - explain on
OK - I've tried the queries with PDQ set to 0 & 5 in dbaccess, run times are almost exactly the same. One underlying question I have, does this version, of IDS 10.00.FC3X6 (non-XPS) Informix support star transformation?…
how to reduce the PDQ ready queries
Hi, I use PDQ in my application, then use onstat -g mgm monitor the pdq state, Queries Average # Maximum # Total # -------------- --------------- --------- ------- Active 3.5 +- 4.4 18 172 Ready 14.5 +- 4.8 21 64 the ready queries always retain around 14, How can i reduce read…
Multiple TEMP dbspace query (I should know this.......)
I really should but I can't find the reference to it in TFM. We have a query falling over with "SQL statement error number -564. Cannot sort rows. SYSTEM error number -179. ISAM error: no free disk space for sort" So I'm going to increase the size of our temp space, but though…
What is IPA abbreviation ?
Hi all IBM INFORMIX DYNAMIC SERVER 10.00 PRODUCT RELEASE bug_number 168928 description WITH NON-DEFAULT PAGE SIZE AND ACTIVE IPA'S, TABLE LEVEL RESTORES FAIL product_code ONUTILS component_code ARCHECKR What is IPA ? Thanks…
RE: DS_NONPDQ_QUERY_MEM
Thanks, Art. I'm confused. That seems like a very little amount to use for those types of queries (in our case, 25% of 768KB). I mean, if we are OLTP, should I then allocate more memory to PDQ so I can allocate some of that to these types of queries? I read that for OLTP you s…
Re: DS_NONPDQ_QUERY_MEM
Goldrick, Jim wrote: > Ok, I have looked and looked and cannot find a decent, somewhat short > answer. We just upgraded to HPUX 11.23 and Informix 10.0. I have been > looking at tuning presentations, pdf files, etc online for 10.0. I keep > seeing reference to DS_NONPDQ_QUERY_…
DS_NONPDQ_QUERY_MEM
Ok, I have looked and looked and cannot find a decent, somewhat short answer. We just upgraded to HPUX 11.23 and Informix 10.0. I have been looking at tuning presentations, pdf files, etc online for 10.0. I keep seeing reference to DS_NONPDQ_QUERY_MEM to help improve performan…
Memory Performance Tweak
These Settings will fine tune your systems memory, management -at least 512MB of ram recommended, go to start\\run\\regedit -and then to the following key http://software-hacks.blogspot.com/…
Re: IDS Features - MAX_PDQPRIORITY
On Dec 27, 4:36 pm, Dave <In4Mix...@gmail.com> wrote: > Hello, > > Aside from fragment elimination, are there any other features that are > enabled by IDS that result from setting MAX_PDQPRIORITY to 1 (or > greater)?? > > Any help would be greatly appreciated. At PDQPRIORITY 1 o…
Single vs multi cpu ids
Due to the expense of Informix licenseing I was forced to setup a small 300 million row DSS instance for one CPU. To get any meaningful performance out of this arragement I fragmented all the tables by expression an required the users to include the expression in there SQL's. Thi…
Migrating data between Informix Platforms without
I've had similar issues with Brio reports. One possible fix is to force the report generation to use PDQ. In this way, the BUFFERS are not flushed and you get to use lightscan buffers. I've been able to up the RA_THRESHOLD/RA_PAGES significantly with no ill effects to OLTP and im…
Vendor JAVA Apps eating up Shared Memory.
We have a couple of Vendor JAVA applications that are eating up shared memory every time they execute there SQL calls. They have their owe pseudo session pooling, but each session increases in shared memory and doesn't reuse pre-allocated memory and gets out of hand. They pointe…
IIUG TV
Great job on the video work!! I look forward to seeing more! -t- -- -- Informix Dynamic Server Database Engine -- http://www.informix.com --…
Re: admin tools like PC client
Mike, What version of Informix are you using? Informix SE? Informix OnLine? Informix Dynamic Server? Most Informix versions these days come with a product call I-Connect that needs to be installed on the PC and rovides the Informix ODBC drivers.…
Error when initializing
06:36:20 IBM Informix Dynamic Server Version [b]10.00.UC6TL[\\b] I believe this is likelt ot be a new ish instance to a newish user of the software…
Re: Informix Marketing Brainstorming Forum
TBP wrote: > Although a Single CPU VP does limit many (all?) of the PDQ / > fragmentation side of things. I'm not sure that it does. You can still get fragment elimination and you can still run queries with multiple threads. Regards, Ben.…
problems with Informix dynamic server 9.4 @ WIndows 2003
I have problems with connecting the server. I use correct user/password to connect to the server, but the server do not known the server. I'm sure the user exist and is one of the user in Informix_Admin group. I have installed Informix dynamic server 9.4 in a windows xp system in…
Re: Move database from IDS 7.30 to IDS 9.40
I restarted an dbexport -d /tmp databese this morning. The program stop with -208 - Memory allocation failed during query processing. What can be the reason here? Best regards. Dirk…
Re: Question about Linux VM tuning for IDS
Ian Michael Gumby wrote: > > If Informix acts the way you say, either one of two things. > > 1) You don't have enough memory. > 2) Informix was poorly designed. Not an Informix issue Mickey. Modern UNIX style OS's regard IO cache as primary for performance and feel free to stea…
Re: Question about Linux VM tuning for IDS
Ian Michael Gumby wrote: > > If Informix acts the way you say, either one of two things. > > 1) You don't have enough memory. > 2) Informix was poorly designed. Not an Informix issue Mickey. Modern UNIX style OS's regard IO cache as primary for performance and feel free to stea…
Re: -211 file not open
I wanted to post back an important note on how this issue was resolved for us. If we turned off the PDQ (Parallel Database Query) option we no longer received a -211 SQLCODE with -101 ISAM. Don't know why this is the case. Is there perhaps a defect in the engine in how it tracks …
PDQ on a single processor system
Don't underestimate the memory restrictions when not using PDQ_PRIORITY. Still when using version 10.00 or later 9.40s, DS_NONPDQ_QUERY_MEM can also help out here. Regards, Andreas…
Informix dbimport blob data slow
> I don't think dbimport uses PDQ so you might want to consider using the > myimport utility available from the IIUG repository which loads in > parallel. I don't think this is exactly the same as PDQ but it may help > speed things up. I think it does for import builds. However…
Re: SAN and dbspace layout.
And don't forget that one day you might like to use PDQ - fragmented tables across multiple dbspaces. Think multiple LUN's, HBA's and how you route your switches if you ever go down this path.…
License Extension
Help.. I need a license extension for the IBM Informix Dynamic Server Version 10.00.FC3R1TL which I downloaded to do a evaluation. How can I get the license extened..my project is in the final stages .. Dhaya Commercial bank…
Re: oninit PIDs and Shared memory segments
onstat -g glo will map the VP's (oninit's) to the os pids. or you can query from sysmaster select vpid,pid from sysvplst; onstat -g seg will map the shared memory segments. The shmkey will have to be converted to hex to match what shows in ipcs or you can query from sysmaster se…
Re: Security Vulnerabilities Addressed in Informix Dynamic Server
Clive Eisen wrote: > Ian Michael Gumby wrote: > > Yes the buffer overflow issues are a pain and frankly they shouldn't occur > > if IBM did formal code reviews. Or rather they should be caught and > > corrected prior to release. > > > > "Paul Watson" <paul@oninit.com> wrote in m…
Security Vulnerabilities Addressed in Informix Dynamic Server
Not sure if this has posted here or not but .... http://www-1.ibm.com/support/docview.wss?rs=630&context=SSGU8G&dc=D600&u id=swg21242921&loc=en_US&cs=UTF-8&lang=en Cheers Paul Paul Watson Tel: +44 1414161772 Mob: +44 7818003457 Web: www.oninit.com GO FURTHER with DB2 GET THER…
Does mysql++ 2.1.1 work on your comp.?
Hello! I use Visual C++ 2005 Express Edition and mysql++2.1.1. Everythink works fine when I'm useing object mysqlpp::Connection(...) only. mysqlpp::Connection baza("information_schema", "localhost","root","pass",0); It even realy connects to MySQL. But when I create mysqlpp::…
IDS 10.0 performance on RedHat
> These are based on multipe runs of a dbimport, and of populating a single > large-ish table then building a couple of indexes thereon, utilising PDQ, > thereafter. how many table fragments? why use dbimport and not HPL or similar to load the table? With dbimport you are likel…
Re: Database Encryption
Adam Tauno Williams wrote: > > In our case the application uses the user's credentials to acquire a/the > key from a key repository, and then connects to the database with the > user's credentials and uses the acquired key to get or update data in > the database. The key never l…
dbschema -d noaa -t ds_fqu
When I run , dbschema -d noaa -t ds_fqu, It returned, BSCHEMA Schema Utility INFORMIX-SQL Version 9.40.UC1 Copyright (C) Informix Software, Inc., 1984-1997 Software Serial Number AAA#B000000 -208 - Memory allocation failed during query processing. But I can do query in dbacce…
Initialising Informix
I am trying to initialize informix on a new server and I am getting this error. The server is HP UX 11.11 and Informix IDS 7.31 What could be the problem / This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible …
Informix Connection From WIN CE.NET Emulator?
How do I connect to informix dynamic server from WIN CE.NET Emulator? Is there a WIN CE informix driver?…
Recommendation on DBA Tools
Do you have any recommendations on database management tools which helps DBA to monitor and manage the system, and have the flexibility of adding add-ons (bring in other tools, like shell scripts, etc.). Something that would collect and analyze the system performance, monitoring…
Re: IDS - Running temp dbspaces on RAMDISK
You can also point PSORT_DBTEMP to ramdisks. This seemed to help us. /ramdisk/psort1/ /ramdisk/psort2/ /ramdisk/psort3/ /ramdisk/psort4/ ... then PSORT_DBTEMP=/ramdisk/psort1:/ramdisk/psort2:/ramdisk/psort3/:/ramdisk/psort4/ ... You just make sure that the ramdisks are created…
IDS - Running temp dbspaces on RAMDISK
Another try could be to increase DS_NONPDQ_QUERY_MEM significatntly: Must be >= 128 and <= 0.25 * DS_TOTAL_MEMORY DS_NONPDQ_QUERY_MEM 65536 # Non PDQ query memory (Kbytes) $ onmode -wm DS_NONPDQ_QUERY_MEM=65536 (IDS 10) Could decrease IO into temp spaces.…
Re: Table Editor for Multiplatforms
Enhancements in Version 4.3 ..... also supports the Informix Dynamic Server 9.x. http://www.ibm.com/software/data/db2imstools/db2tools/db2te/…
dostats
Is there a way to have dostats update specific procedures? I would like to set PDQ on several, but not all. Thanks…
Fragmentation Elimination Problem
I am on version IBM Informix Dynamic Server Version 10.00.FC4.…
Re: Informix Dynamic Server 9.30 - Shared Memory
Ronald Schwingel wrote: > Can someone please tell me how much Shared Memory (gigabytes?) > Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use > before asserting with a Shared Memory access error? Can you provide > documentation that I can pass on also? It looked to…
RE: Informix Dynamic Server 9.30 - Shared Memory
First off you shouldn't be getting shared memory access errors. That sounds more like a bug that technical support should address. I wouldn't be surprised if your getting can't allocate additional shared memory segment messages. Informix 32-bit on AIX is a bitch. The problem …
Informix Dynamic Server 9.30 - Shared Memory
Can someone please tell me how much Shared Memory (gigabytes?) Informix Dynamic Server 9.30 (32-bit version) for AIX 5L can use before asserting with a Shared Memory access error? Can you provide documentation that I can pass on also? We are looking at providing one of cust…
create a DB on Linux
Hi! I have installed Informix dynamic server on Linux. Now I want to create a data base. What should I do? Thanks…
Re: flagship sunk
Funny I have been able to download IDS 10 for Solaris, Windows and Linux am I just smarter than everyone else? www.informix.com Support and downloads In the middle trials and betas Oh look Informix Dynamic Server (IDS) V10.0 easy!…
Re: IDS 10 - documentation questions
Oops! I mean IBM Informix Dynamic Server Version 10.00.TC3ET Althought the release notes (idse_win_release_notes_10.0.html) start with:- "Release Notes for IBM Informix Dynamic Server Express Edition for Windows Platforms 10.00.TC3E, 1 July 2005 " so it is TC3E or TCE3T? and …
Re: Sql to concatenate multiple rows to a single row / column
Thank you SaltTan - it works beautifully. BTW, we have IBM Informix Dynamic Server Version 9.40.FC6.…
Re: update statistics
tomcaml@yahoo.com wrote: > Hello, > > We recieved this message from a cron job over the weekend: > > 564: Cannot sort rows. > > 179: ISAM error: no free disk space for sort > Error in line 50 > Near character position 44 > > > question - does Informix always go straight to di…
New IDS Forum on IBM Developerworks website
This forum provides a place for Informix Dynamic Server developers and users to share their questions, thoughts, and ideas with others. http://www-128.ibm.com/developerworks/forums/dw_forum.jsp?forum=548&cat=19…
Re: IDS 10 Express Edition
Note 10.00.xC3 = Enterprise Version 10.00.xC3E = Express Edition http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp?topic=/com.ibm.relnotes.doc/uc3E/idse_win_release_notes_10.0.html Then click on "IBM Informix Dynamic Server Express Edition" in the right pane:…
setup Informix Dynamic Server Version 9.40.UC1E1 to linux error
I setup Informix Dynamic Server Version 9.40.UC1E1 to linux execcute oninit -ivy is failed the online.log is write /// 16:31:32 Dynamically allocated new virtual shared memory segment (size 8192KB) 16:31:32 Informix Dynamic Server Version 9.40.UC1E1 Software Serial Number AA…
RE: Solaris memory management
Dirk, I run 7.31.FD4 on Solaris 9. there is a line in the release notes (filename IDS_7.3) "The maximum size of any shared memory segment is 4294967295 bytes(approx. 4GB)." I use RESIDENT -1, SHMVIRTSIZE 4096000 and SHMADD 2048000 and have 7 segments allocated (total 16Gb). Wit…
RE: Solaris memory management
Dirk, I run 7.31.FD4 on Solaris 9. there is a line in the release notes (filename IDS_7.3) "The maximum size of any shared memory segment is 4294967295 bytes(approx. 4GB)." I use RESIDENT -1, SHMVIRTSIZE 4096000 and SHMADD 2048000 and have 7 segments allocated (total 16Gb). Wit…
RE: Solaris memory management
Hi Dirk. Limitation Solaris 32bit is 4GB(unsigned inteter). Limitation Solaris 64bit is unsigned long. See http://developers.sun.com/solaris/articles/tuning_solaris.html HTH. -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: "Dirk Moolman" <DirkM@mxgroup.co.za> >To: …
RE: Solaris memory management
Hi Dirk. Limitation Solaris 32bit is 4GB(unsigned inteter). Limitation Solaris 64bit is unsigned long. See http://developers.sun.com/solaris/articles/tuning_solaris.html HTH. -- Tsutomu Ogiwara from Tokyo Japan. ICQ#:168106592 >From: "Dirk Moolman" <DirkM@mxgroup.co.za> >To: …
RE: Solaris memory management
The release notes I am looking at on Sun's site are showing that that parameter is obsoleted, of course then they define it. So maybe this web page will give you what you need. I like the System Admin collection of manuals. http://docs.sun.com/app/docs/doc/806-7009/6jftnqskt?a=v…
RE: Solaris memory management
The release notes I am looking at on Sun's site are showing that that parameter is obsoleted, of course then they define it. So maybe this web page will give you what you need. I like the System Admin collection of manuals. http://docs.sun.com/app/docs/doc/806-7009/6jftnqskt?a=v…
RE: Solaris memory management
My main concern is not Informix, but the limitation in the operating system. I had an AIX system, where I specified lots of memory in Informix, but AIX still had to break it up - could not handle such a large contigous chunk. I was not able to only have one virtual segment on …
RE: Solaris memory management
My main concern is not Informix, but the limitation in the operating system. I had an AIX system, where I specified lots of memory in Informix, but AIX still had to break it up - could not handle such a large contigous chunk. I was not able to only have one virtual segment on …
RE: Solaris memory management
-----Original Message----- From: Martin Fuerderer [mailto:MARTINFU@de.ibm.com] Sent: 11 April 2005 06:57 PM [dirk] owner-informix-list@iiug.org wrote on 11.04.2005 13:35:51: > I am trying to find out what the limit is on contiguous memory in > Solaris. Can I grab one segment of…
RE: Solaris memory management
-----Original Message----- From: Martin Fuerderer [mailto:MARTINFU@de.ibm.com] Sent: 11 April 2005 06:57 PM [dirk] owner-informix-list@iiug.org wrote on 11.04.2005 13:35:51: > I am trying to find out what the limit is on contiguous memory in > Solaris. Can I grab one segment of…
Re: Solaris memory management
Martin Fuerderer wrote: > Dirk Moolman wrote on 11.04.2005 13:35:51: >>I am trying to find out what the limit is on contiguous memory in >>Solaris. Can I grab one segment of 20G, or will Solaris break the >>segment down into smaller pieces ? >> >>For example, if I run onstat -g …
Re: Solaris memory management
Hi, On UNIX systems INFORMIX reserves memory in blocks( this is 8k each one). Your 20Gg of Memory are 20 Gb / 8Kb of contigous blocks. If you see in your onstat -g seg one virtual value, there are one contiguos Virtual segment. Otherwise, remember that INFORMIX manage a RESIDENT…
Re: Solaris memory management
Hi, in general this is configurable in the kernel. Maximum possible configuration may also depend on Solaris version, but I don't know. The kernel parameter may be something like shminfo_shmseg but I'm not 100% sure. Regards, Martin -- Martin Fuerderer IBM Informix Developmen…
Re: Solaris memory management
Hi, in general this is configurable in the kernel. Maximum possible configuration may also depend on Solaris version, but I don't know. The kernel parameter may be something like shminfo_shmseg but I'm not 100% sure. Regards, Martin -- Martin Fuerderer IBM Informix Developmen…
Solaris memory management
I am trying to find out what the limit is on contiguous memory in Solaris. Can I grab one segment of 20G, or will Solaris break the segment down into smaller pieces ? For example, if I run onstat -g seg, can I have one segment of 20G, or is this not possible ? I am using Solar…
Solaris memory management
I am trying to find out what the limit is on contiguous memory in Solaris. Can I grab one segment of 20G, or will Solaris break the segment down into smaller pieces ? For example, if I run onstat -g seg, can I have one segment of 20G, or is this not possible ? I am using Solar…
Cost Estimation for queries
Again optimizer considering BUFFERS/RA_PAGES while considering estimated no of I/Os is not a good idea since buffers are part of volatile memory where at a point of time we cannot be sure how many pages reside in memory satisfying the query for which optimizer is evaluating the b…
Join threads
Hi all, When i set PDQ priority on the session and run a query involving joins on table,how can i know whether the server is using the parallel join strategy or not. what is the utility to monitor the parallel joins. Bye.…
Informix Dynamic Server information Centre
Great new utility just posted under IDS 10 on the docs site has uses for other products and versions than just IDS 10 so take a look even if you are not using 10 yet!! http://publib.boulder.ibm.com/infocenter/ids9help/index.jsp…
Cannot find message file. Check INFORMIXDIR and DBLANG.
im trying to run the oninit -i in the command prompt when the message appear... we installed... IBM Informix Dynamic Server 9.40 IBM INFORMIX-4GL Rapid Development System Version 7.32.UC2 IBM INFORMIX-4GL Version 7.32.UC2 set up sqlhosts, services, onconfig, path... but when tr…
Re: Multiple virtual segments
Neil Truby wrote: > "Paul Watson" <paul@oninit.com> wrote in message > news:cutjmk$5s9$1@thorium.cix.co.uk... > >>Madison Pruet wrote: >> >> >>>Solaris is not all that vunurable to the IPCSHM issue... >> >>But Solaris is tuned for 4 segments > > > can you exapnd on that please, …
question about pdq memory
If you have a certain amount of memory configured in the DS_TOTAL_MEMORY parameter in onconfig, does that mean your engine reserves that memory only for pdq queries where you have pdqpriority set ? In other words, if you are not running any queries with pdqpriority set, is that m…
IDS 9.50
Hi Diego, I've gathered from Mark Scranton's website (http://www.iiug.org/markscranton/informix/informix.htm) that IDS v9.5 is set for general availability on Jan 2005. Some of the major features are: - Column-level encryption - a very popular customer request to allow encryptio…
clarification of parallel query on informix and oracle
Hi Gurus , I use oracle 9i rac on linux redhat ia64 . When i issue a parallel query on oracle , the query bypasses the oracle buffer cache and use process memory instead. So no caching occurs. When a full table scan is issued in parallel , it is also true that , oracle always b…
chunk capacity
we are using BM Informix Dynamic Server Version 9.40.UC2X3 on Linux Kernel 2.4.21 the command 'onstat -d' shows ... Expanded chunk capacity mode: disabled how can I change this mode to 'enabled'?…
Virtual Memory Question for IDS 7.31 on Windows
On Tue, 14 Sep 2004 18:17:30 -0400, Stefan.Gabriel wrote: > Hi all, > > I have a question regarding the virtual memory portion of informix shared > memory. What is the comparison between the size of the resident memory > compared to the size of the virtual memory? i.e, if the re…
Re: HPL and PDQ
"Tisha" <loden@networkip.net> wrote in message news:8085cdee.0408240701.35b83299@posting.google.com... > Neil, > > Did you get this to work with onpload in 9.4? I have used HPL alot in > past releases and never gotten it to use the pdq settings for an index > build. My work aro…
IDS V7.30 and Windows 2000
Can Informix Dynamic Server Version 7.30.TC6 be run on a Windows 2000 host system? TIA Erwin…
Re: HPL and PDQ
Neil, Did you get this to work with onpload in 9.4? I have used HPL alot in past releases and never gotten it to use the pdq settings for an index build. My work around has always been to build the table with no indexes, load the data using hpl, and then build the indexes in a…
Re: HPL and PDQ
--0__=08BBE466DFCDAC258f9e8a93df938690918c08BBE466DFCDAC25 Content-type: multipart/alternative; Boundary="1__=08BBE466DFCDAC258f9e8a93df938690918c08BBE466DFCDAC25" --1__=08BBE466DFCDAC258f9e8a93df938690918c08BBE466DFCDAC25 Content-type: text/plain; charset=US-ASCII Content-tran…
Re: HPL and PDQ
> Hi Neil, > > How are u running the onpload. Are you using ipload or onpladm? > If that is the case then we might not be passing these environment > varaibles to onpload. onpladm.…
Re: HPL and PDQ
--0__=08BBE466DF93E4628f9e8a93df938690918c08BBE466DF93E462 Content-type: multipart/alternative; Boundary="1__=08BBE466DF93E4628f9e8a93df938690918c08BBE466DF93E462" --1__=08BBE466DF93E4628f9e8a93df938690918c08BBE466DF93E462 Content-type: text/plain; charset=US-ASCII Content-tran…
HPL and PDQ
IDS 9.40FC3W2 on HP-UX11.11 I'm running an onpload (HPL) run job which is loading 35m rows to a table then enabling the indexes. The index "enable", which I understand to be an ordinary build in a different jacket, is taking much longer than I'd expect. I can see from the marve…
avoiding disk sorts or usage of temp spaces
Hi, yes, starting with 9.40.[UWHF]C4 there is a new ONCONFIG variable DS_NONPDQ_QUERY_MEM <size in kbyte> this parameter can be used to raise the current limit of sort memory for non PDQ queries (128 kbyte). Check the release notes for more information. Before 9.40.FC4 you co…
Re: Error Initialize Informix Dynamic Server
Art S. Kagel wrote: > On Wed, 04 Aug 2004 05:05:41 -0400, madiego wrote: >>I install Informix Dynamic Server and when I initialize 'oninit -iv' : >> >>This action will initialize Informix Dynamic Server; any existing Informix >>Dynamic Server databases will NOT be accessible - Do…
Error Initialize Informix Dynamic Server
Hello, I install Informix Dynamic Server and when I initialize 'oninit -iv' : This action will initialize Informix Dynamic Server; any existing Informix Dynamic Server databases will NOT be accessible - Do you wish to continue (y/n)? y Checking group membership to determine ser…
Re: how release threads?
make sure when you update statistics for procedure you set pdq to 0...the stored procedures that help facilitatemay be mutltithreading if you do not and the thread count will increase until evetually you get an exception error which might crash the engine.…
Re: Dropped users on AIX 5.1
Hi CKGeier@nwc.edu, That almost sounds like an aging issue. In the a simlilar vein, I had a smililar problem that took me forever to figure out. The DBA here before me had an update statistics script that ran at 100 pdq and within that script he had set "update statistics for pro…
Re: Informix Dynamic Server and DB Tuning
I am experiencing similar problems with users migrating from Standard Engine to IDS 9.30. It appears that some applications are more susceptible than others. What application(s) are you running? We also have experience of adding more BUFFERS, LOCKS, etc and not improving the sit…
RE: Informix Dynamic Server and DB Tuning
Muthana Increase BUFFERS in onconfig file. UPDATE STATISTICS for each table (as a minimum) rerun the query and see what improvements you get. If you still have problems post the results of:- onstat -p onstat -m onstat -R and sqexplain.out of any particularly slow query or updat…
Informix Dynamic Server and DB Tuning
Dear Sir, The question how can make DB Tuning for Informix Dynamic Server version 9:30 to get the query faster. I used IDS 9:30 and it's not quick enough like our old Standard Engine. which Parameter can i change to make that or what shall i do? Regards Muthana AL-Temimi…
Re: PDQ not used ?
Thanks a lot for your help ! I found my problem. I mixed some things up... I set pdqpriority=100 in my sqlstatement (embarassed...).. WinSql didn't give me an error on it. But Right now, it works great ! Thanks a lot ! Bjorn "Bjorn De Waele" <bjornREMTHIS@pandora.Be> wrote …
Re: PDQ not used ?
Hi Bjorn. Try the following. % dbaccessdemo7 Execute the following sql via dbaccess set pdqpriority 100; select * from customer; Another terminal onstat -g mgm e.g) Here is a results of my test. [tsutoo@bygzam ~]tsutoo731ud7% onstat -g mgm Informix Dynamic Server Version 7.3…
RE: PDQ not used ?
Hi Bjorn. Make sure your parameter of onconfig file. DS_MAX_QUERIES # Maximum number of decision support queries DS_TOTAL_MEMORY # Decision support memory (Kbytes) If the avobe parameter is space, probably PDQ will not run. Specify DS_MAX_QUERI…
PDQ not used ?
Hello everybody, here's our Informix newbie again :) I'm just new in the company and nobody is a real informix specialist in our IT-team, so I try to pull it to me. I know that I should follow a course but we have no time for that cause the new server need to be live in 3 week…
Can IDS accessing Informix SE Tables.
Hello, Now we are using Informix SE. We are planning to go Infomix Dynamic Server 9.x. Before migrating our current applications to IDS 9.x., first we have to develop a new application in IDS 9.x, in that we need to use some of the tables from informx SE. Could you please answer…
Re: Memory allocation failed during query processing -AIX 5.1
Jonathan Leffler <jleffler@earthlink.net> wrote in message news:<jvsCc.15795$Wr.1627@newsread1.news.pas.earthlink.net>... > CKGeier@nwc.edu wrote: > > here is what we have in our onconf file: > > > > # Parallel Database Queries (pdq) > > MAX_PDQPRIORITY 80 # Maximum …
RE: Memory allocation failed during query processing -AIX 5.1
you may need to issues few onstat commands (onstat -g seg, onstat -g mgm, onstat -g mem, onstat -u, onstat -g ses, onstat -g sql ) to see what exactly is happening with the query, it may be also possible that the kernel parameters are not set right. you may also set DS_MAX_QUERI…
Re: Memory allocation failed during query processing -AIX 5.1
CKGeier@nwc.edu wrote: > here is what we have in our onconf file: > > # Parallel Database Queries (pdq) > MAX_PDQPRIORITY 80 # Maximum allowed pdqpriority (was 100) > [...] > "Savio Pinto (s)" <spinto@cap.org> wrote: >> have you turned on PDQ?, is the DS_TOTAL_MEMOR…
RE: Memory allocation failed during query processing -AIX 5.1
here is what we have in our onconf file: # Parallel Database Queries (pdq) MAX_PDQPRIORITY 80 # Maximum allowed pdqpriority (was 100) DS_MAX_QUERIES # Maximum number of decision support queries DS_TOTAL_MEMORY # Decision support memo…
Re: Memory allocation failed during query processing -AIX 5.1
We are on 32-bit. I really doubt that the process is using up 2GB of shared memory....I haven't seen any notices in the log file about any more segments being added or attempted dynamically during this time. This is what I see. Informix Dynamic Server Version 7.31.UD6 -- On-…
RE: Memory allocation failed during query processing -AIX 5.1
have you turned on PDQ?, is the DS_TOTAL_MEMORY set greater than SHMTOTAL in the onconfig?. also, may need to check SHMADD onconfig parameter. -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org]On Behalf Of CKGeier@nwc.edu Sent: Tu…
RE: Memory allocation failed during query processing -AIX 5.1
Are there any other instances on this server? (and all their onstat -g seg). What does onstat -g seg say? MW > -----Original Message----- > From: owner-informix-list@iiug.org > [mailto:owner-informix-list@iiug.org]On Behalf Of CKGeier@nwc.edu > Sent: Wednesday, 23 June 2004 …
Memory allocation failed during query processing -AIX 5.1
A process failed on AIX 5.1, IDS 7.31 UD6 with this error: -208 Memory allocation failed during query processing. The database server needed to allocate data-space memory in order to process the query, but none was available. This error may reflect a hardware limit, an opera…
Re: PDQ memory / non-PDQ memory
sumGirl said: > This is likely obvious, so feel free to treat me like a know-nothing > bimbo. If I must. :o) Actually, I can't. There's no joy in it when it gets offered up on a plate like this. -- Bye now, Obnoxio "C'est pas parce qu'on n'a rien � dire qu'il faut fermer sa g…
RE: PDQ memory / non-PDQ memory
Formally, PDQ memory is not 'reserved' when PDQ is not running. It is accessible to other sessions .... This is theory. In fact, this memory can't be allocated to memory-hungry subsystems, such as buffer cache. If other sessions allocate a lot of memory from the same pool (V se…
PDQ memory / non-PDQ memory
This is likely obvious, so feel free to treat me like a know-nothing bimbo. If I dedicate X amount of memory to informix and set Y available to PDQ - is Y amount available to non-PDQ processes when not in use? Or is it always reserved and sitting around doing nothing when I am no…
Re: opinions on this SQL statement
You should have the developer run his query through the SQL Query Analyzer Query-Plan while you watch and see how his query runs on SQL-Server. It might give you some insight into how it works. Just start SQL-Query-Analyzer ( the equivalent of ISQL or DB-Access ) and paste the …
Dose anybody have the dbtop script in the Troubleshooting informix course?
Dears, I study the Troubleshooting ibm informix dynamic server course. At the module 4 exercise need the dbtop script. Dose anybody has this dbtop script and post for me? Thanks. Philip Yeh.…
PDQ priority
We have an application written in Java (server side JBOSS application server) and would like to give certain users a higher priority. I don't want to set it via the environment variable since that would raise the priority for everyone. It it possible to set the PDQPRIORITY via ja…
Work group edition - Unlimited edition??
Taken from IBM web site:- =========================================================================== The following Informix Dynamic Server Workgroup Unlimited editions have been added to the IBM Data Management Gold Transaction Processing Bundle for SMB Unlimited: IBM Informix…
Re: [Informix Dynamic Server (IDS):] Digest 2671
For a course in the US, check out: http://www-306.ibm.com/services/learning/ites.wss?pageType=course_description&co urseCode=L1760&country=us&language=en (IBM course L1760). There is probably a similar course offered in Europe somewhere. Hope this helps. Kevin Doiron Toronto,…
how to tune buffer allocated to index data?
The profile you have (Data 12%, Index 86%) could point to the need to increase BUFFERS. Index pages tend to stick around in memory because they are usually used more often than data, especially in OLTP systems where data is almost always accessed through an index (sometime 2 or 3…
Leaking memory in JDBC Connection
Hello. We have an app querying numbers of fairly large blob sets using Java JDBC (JDBC 4). Trouble is, the app seems to grow till an OutOfMemoryError results. We suspect JDBC Connection class because disconnecting and reconnecting clears the excess memory usage. We are using …
Re: Transaction support in informix dynamic server(IDS)
chaithra wrote: > i wanted to know, if in IDS we can get to know the status of a > transaction at any given time. or once any transaction commits or > rollsback we should be able to know the status. > is it possible through c++ interface provided by the IDS. I'm not quite s…
Transaction support in informix dynamic server(IDS)
hi all, i wanted to know, if in IDS we can get to know the status of a transaction at any given time. or once any transaction commits or rollsback we should be able to know the status. is it possible through c++ interface provided by the IDS. thanx in advace chaithra…
configure computer for using informix
what shell I do to make my computer work with informix. I have installed winXP on my computer, informix 4 i informix dynamic server? THANKS…
Where can I get the client API?
Hi, does anyone knows where to get the client API for Informix Dynamic Server 7.x? Perhaps we want to access the server via api directly. Kind regards, Joachim Engel.…
Informix optimizer
Hi, Does anyone know if the Informix Dynamic Server (7.31 or 9.4) database optimizer uses star schema optimizer techniques? Thank you, Tony…
What is DS memory used for?
Can someone tell me exactly what DS memory is actually used for? Yes, I know it's for DS queries, but what does it hold? Session blocks? Execution paths? Data? Temp data? Sort files? And how exactly does the amount you have affect a query? Can anyone explain exactly what was goi…
Help require in Memory resident feature of Informi
In our application we would like to load one index into memory to avoid continuous IO on disk. This index is used continuously by all the queries. Our assumption is that after loading this index into memory we will save on disk IO and hence will get improvement in the performance…
Re: PDQ and 940
Paul, I am using the same verision 9.40 fc2, Solaris 2.8 and do not see this. Rich "Paul Watson" <paul@oninit.com> wrote in message news:3FCBA46A.2F42895@oninit.com... > Sun Solaris 2.8 64bit > 9.40.FC1/2 > > I can't turn off PDQ unless it's done in the onconfig. Queries > t…
drop a column
Hi, ALTER TABLE <tablename> DROP <column name> ; should do (in most cases). Regards, Martin -- Martin Fuerderer IBM Informix Development Munich Data Management Solutions "GANESH RAM" <ganesh.r@fmr.com> Sent by: forum.subscriber@iiug.org 03.12.2003 10:39 To: ids@iiug.org cc: …
PDQ and 940
Sun Solaris 2.8 64bit 9.40.FC1/2 I can't turn off PDQ unless it's done in the onconfig. Queries that were running under 9.30 now take forever as long and spawn 20+ threads Anybody else seen this -- Paul Watson # Oninit Ltd # Growing old is mandatory Te…
TRUNCATE TABLE command in 9.3?
I am aware that Informix Dynamic Server previously has not included the TRUNCATE TABLE command. Does anyone know if 9.3 or 9.4 include this command?…
Workgroup Edition or Enterprise
Olmedo Monteverde wrote: > Nope. Between other features, PDQ is not available. Actually, I think it's more subtle than that - Fragmented tables are not available, but PDQ is. Fragmented tables are the premier beneficiary of PDQ with large queries, however PDQ does have other us…
Linux fgl_getenv
Informix Dynamic Server Version 9.30.UC3 on Linux. Do I have to do something before I can use the fgl_getenv call in a stored procedure? When I try I get 674: Routine (fgl_getenv) can not be resolved.…
Re: Informix limitations, should we be using Oracle?
I read all you post and it was very interesting... I have only 2 thing to say and have in count that I don't know anything about XPS: 1. In IDS 9.x, you can't select a NULL, you can use it in an UPDATE, INSERT or DELETE. You can workaround this by creating an sp sp_genull() who…
Re: PDQ
Attachment is missing!!! Gorazd "Rajib Sarkar" <rsarkar@us.ibm.com> wrote in message news:bn8r6t$2v2$1@terabinaries.xmission.com... > > Actually, Obnoxio is kind of right ..:-) Although this parameter is not > new, this parameter has been "upgraded" to accomodate a) More memory…
Re: PDQ
On Wed, 22 Oct 2003 19:14:12 -0400, David E. Grove wrote: Yes! This is why my dostats utility explicitely sets PDQPRIORITY to zero (or a value specified with the -P option) for stored procedure updates regardless of the PDQPRIORITY value in the user's environment (or specified …
Re: PDQ
On Thu, 23 Oct 2003 04:50:06 -0400, Mark D. Stock wrote: > Obnoxio The Clown wrote: > >> David E. Grove wrote: >> >>>>makes a big difference to stuff like index creation and update stats. >>> >>>We learned to be careful with PDQ and UPDATE STATISTICS. >> >> There is a new enviro…
Re: PDQ
Mark D. Stock wrote: > Anyway, thanks for the update. In what version was this parameter > "upgraded"? I think 7.31xC6, somewhere in the 9.30 stream (xC4?) and 9.40. Not too sure of 9.30. -- Ciao, The Obnoxious One "Ogni uomo mi guarda come se fossi una testa di cazzo"…
RE: PDQ
Rajib Sarkar [mailto:rsarkar@us.ibm.com] > > Actually, Obnoxio is kind of right ..:-) "Kind of right"? "Kind of right"? Cheeky! :o) -- Ciao, The Obnoxious One "Ogni uomo mi guarda come se fossi una testa di cazzo"…
Re: PDQ
Mark D. Stock wrote: > > Obnoxio The Clown wrote: > >> David E. Grove wrote: >> >>>>makes a big difference to stuff like index creation and update stats. >>> >>>We learned to be careful with PDQ and UPDATE STATISTICS. >> >> There is a new environment variable (DBUPSPACE?) which,…
Re: PDQ
Rajib Sarkar wrote: > > Actually, Obnoxio is kind of right ..:-) Although this parameter is not > new, this parameter has been "upgraded" to accomodate a) More memory for > sorting b) To print out the progress of update stats (explain plan). It's lucky I added the proviso, "Unl…
RE: PDQ
Great paper ! a few months ago i got an error when running update statistics for a very big table : "Not enough space for sorting" ... or something like that . My IDS Version is 7.31.UD1 How can I avoid this error? By Using DBUPSPACE environment Variable ? Thanks in advance …
Re: PDQ
Obnoxio The Clown wrote: > David E. Grove wrote: > >>>makes a big difference to stuff like index creation and update stats. >> >>We learned to be careful with PDQ and UPDATE STATISTICS. > > There is a new environment variable (DBUPSPACE?) which, when used with PDQ > will allocat…
Re: PDQ
> makes a big difference to stuff like index creation and update stats. We learned to be careful with PDQ and UPDATE STATISTICS. In a past job, I had been working mainly with a data warehouse. In that environment, I made constant and effective use of PDQ, and didn't think anyt…
PDQ
Hi guys, since the price-differences betwen IDS 9.4 and IDS 9.4 WE are not marginal, I wondered, whether it's worth to buy a IDS 9.4 in order to be able to use PDQ. May be it's better, to invest the difference-amount in better hardware. Does anyone of you have expieriences in u…
-208 Memory allocation failed during query processing.
Hi, I am getting error -208 when I rrun my 4gl programm. It has a huge query which joins 5-6 tables and has group by on 30 plus fields. I have PSORT_NPROCS AND PSORT_DBTEMP set to 7 different file systems. Any idea how I can proceed without changing my query? Error 208 states…
Re: Product Defect Query no longer available????
On Tue, 2 Sep 2003 09:19:18 -0500, kernoal.stephens@autozone.com wrote: > >https://www-927.ibm.com/software/data/informix/support/pdq/ > >PDQ alive and well! > > Verified . . . .…
Re: How to retrieve first 50 rows , next 50 rows and so on in Informix
Java , java script, JSP , HTML and Webserver is Tomcat Thanks Heaps!!!! John Carlson <john_carlson@whsmithusa.com> wrote in message news:<a7omkvoiah2g6amjo03s21rl8d29gccc8p@4ax.com>... > On 25 Aug 2003 14:27:45 -0700, kalpanapai@hotmail.com (KalpanaPai) > wrote: > > >I know th…
Re: How to retrieve first 50 rows , next 50 rows and so on in Informix
On 25 Aug 2003 14:27:45 -0700, kalpanapai@hotmail.com (KalpanaPai) wrote: >I know that >Select first 50* from Table will get only 50 rows >But i want to know from the application side , if the query returns >more rows , i want to get them in 50's and display and next 50 etc, in…
ALTER FRAGMENT goes walkabout
Neil Truby wrote: > [stuff] hmmm - is your engine setup in such a way as to encourage PDQ index builds? If so, perhaps the ALTER FRAGMENT is not triggering the much faster PDQ builds?…
RE: Dynamic Server versus Universal Server ??
Originally, Version 7.x was called 'Informix Dynamic Server', Version 9.0x was called 'Universal server' Starting with 9.1, Universal server became 'Dynamic server with Universal data option'. With 9.2, new names 'Internet Foundation 2000 ' and 'Dynamic server 2000' ware given…
Informix Dynamic Server 2000 startup problem
Hi, While starting up informix in multi user mode , we wait for the database to come up by checking the onstat - o/p . But if the system is loaded, even after onstat shows status as online , the connection is rejected by the database . The wait loop that we do is as follow…
ER problem 9.3.UC2 / linux
My line manager has been doing some experiments with ER on Linux and this may be the problem he experienced. He logged a case with IBM Informix technical support on this issue. Their response is that there is an issue with raw IO and logical logs on Linux. Using cooked files for …
why I can't see the output of "onstat -g wts"
test:/informix>onstat -g wst Informix Dynamic Server 2000 Version 9.21.FC7 -- On-Line -- Up 5 days 13:23:03 -- 11132960 Kbytes Wait statistics not enabled How to enable the wait statistics???…
informix SDK 2.81 ifxoledbc OLEDB and ADO
When Updating or deleting a non existing row in a table, the informix oledb provider produces an "UnSpecified error". Environment: Informix Dynamic Server 7.31 Informix SDK 2.81 ADO 2.6 Any help will be appreciated. Thanks in advance…
oninit: Fatal error in shared memory creation
Joe; The most frequent cause of this error is when the shared memory segments you are trying to create when starting the engine already exist. Look in the online log for an error 17 - that means the segments already exists. That means either the engine is already running (run '…
memory increase
He's right in theory, but not in practice. Informix will dynamically add memory segments up to and beyond physical memory ( into swap space ). But this is not something you want to happen. It's better to plan for the memory requirements and set the initial shared memory segmen…
Re: Dynamically allocated new extension shared memory
If you are using datablades you will "EXTENSION" memory segments ... "EXTENSION" is memory segment class used within the source. Other classes are RESIDENT, MESSAGE and VIRTUAL. I believe you will see a VX when you do a onstat -g seg in your instance. HTH Thanx much, Rajib Sar…
Re: Dynamically allocated new extension shared memory
If you are using datablades you will "EXTENSION" memory segments ... "EXTENSION" is memory segment class used within the source. Other classes are RESIDENT, MESSAGE and VIRTUAL. I believe you will see a VX when you do a onstat -g seg in your instance. HTH Thanx much, Rajib Sar…
=?gb2312?B?tPC4tDogUmUuIFNoYXJlZCBNZW1vcnkgUGFyYW1ldGVycyBbODA1XSA=?=
The UC portion of the release level means this is a 32 bit build. A 64 bit version is identified as an FC release level. We are running on Solaris 2.6 which is a 32 bit OS. As I understand it, 3.75 GB is the threshold limit on the total amount of memory a 32 bit engine can manag…
Re: Multiple DBs vs Multiple instances
----- Original Message ----- From: Terrence Mu.... <terrence@wagerworks.com> At: 3/13 14:23 > What are the pros/cons of have multiple databases in one instance > as opposed to having multiple instances with just one database. For multiple databases: Makes better use of system r…
RE: PDQ Woes
PDQPRIORITY sets the amount of PDQ resources that will be used by a query. When you set it to 75 it means that it will use 75 percent of PDQ resources (Memory, Threads, etc.). When you run onstat -u you saw multiple threads not multiple sessions. If you run onstat -g sql <sid> fo…
PDQ Woes
OK, so a user job has been running now (we joke not), 2 days on one little select, ok its lots of data. So I kill it, my box was grinding. I run it with MAX PDQ at 10, it crawls, my box crawls. I set PDQPRIORITY=75 (I know, but I'm the admin and no-ones gonna …
Re: FW: PDQ
Dirk Moolman wrote: > > I have 5 CPU VPs, so this shouldn't be the problem. I've been meaning to > read a bit more about PDQ - I've just been a bit busy. > > I touched a little on PDQ in 7.30 I'm now working with 9.21FC1 and have > to just touch up on PDQ again. I did set th…
RE: PDQ
While we're on the topic. XPS 8.31 has implicit PDQPRIORITY. In other words the optimizer can decide what to allocate for your query. cheers j. > -----Original Message----- > From: Dirk Moolman [mailto:dirkm@reach.co.za] > Sent: Wednesday, February 07, 2001 7:06 AM > To: info…
RE: PDQ
PDQ gates on CPU VPs as well? Something new. cheers j. > -----Original Message----- > From: Art S. Kagel [mailto:kagel@erols.com] > Sent: Wednesday, February 07, 2001 3:20 AM > To: informix-list@iiug.org > Subject: Re: PDQ > > > How many CPU VPs do you have? PDQPRIORITY 50 im…
FW: PDQ
I have 5 CPU VPs, so this shouldn't be the problem. I've been meaning to read a bit more about PDQ - I've just been a bit busy. I touched a little on PDQ in 7.30 I'm now working with 9.21FC1 and have to just touch up on PDQ again. I did set the PDQ parameters in the onconfi…
RE: PDQ
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C09058.C3BD1BEA Content-Type: text/plain; charset="iso-8859-1" PDQ is a resource. If there is insufficient of that …
FW: PDQ
This is a multi-part message in MIME format. ------=_NextPart_000_0060_01C08E29.BB8B3640 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I think it has to do with the type of query I run, that some queries use PDQ and others not ........ Dirk -…
PDQ
This is a multi-part message in MIME format. ------=_NextPart_000_005A_01C08E0D.B35BA2A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, I just ran into something very strange. I am running to queries on my system (doing my weekly maintenanc…
HPUX 11.0 memory management and IFMX
IDS 7.30uc7 OS HPUX 11.0 I'm in the process of troubleshooting a minor issue since we've upgraded to HPUX 11.0. When the engine comes up, the following messages show up in the online. log: 13:25:03 shmat: [EINVAL][22]: shared memory base address illegal 13:25:03 usi…
RE: PDQ_PRIORITY parameter!
PDQ is 100 words or less. This may even be reasonably accurate. When you run a query, issue a SET PDQPRIORITY x where x is some valus between 0 and 100; You can also export the environment variable PDQPRIORITY=x I'm not going to try to analyze what you've set it to here witho…
PDQ_PRIORITY parameter!
Note that PDQPRIORITY values of 0, 1 & 2 are special values. 0: No parallelism 1: Minimal parallelism (same as LOW) 2: Lowest setting that give full parallel features. See the Performance Tuning Guide and the Administrators Guide for details. Art S. Kagel Murat YILDIZ wrote: …
What requires an IDS Linux?
Hello What requires an Informix Dynamic Server Linux a desktop and/or a network version of Linux? Thanks in advance Jacqueline Romero Miranda…
Informix v Oracle
Hi Is there a function in Informix Dynamic Server 2000 that is like Oracles CREATE SEQUENCE that uses NEXTVAL/CURVAL and %ROWCOUNT, ect? Thanks for all contributions Jordan jbruce@asaglobalserv.com…
Fw: Redbrick Memory Management & Statistics
----- Original Message ----- From: exformix <exformix@hotmail.com> To: Leonardo F. Cardoso <lfcardoso-nospam@hotmail.com> Sent: Tuesday, November 07, 2000 12:02 AM Subject: Re: Redbrick Memory Management & Statistics > Hi, > > There is no concept of updating statistics in Redbri…
Redbrick Memory Management & Statistics
Hi, How can I control the amount of shared memory redbrick uses? I can�t find any parameter in the configuration file. Another question: Is statistics automatically maintained in RedBrick? Is there some SQL command like "update statistics"? Thanks in advance …
Retrieving product name
Hi all, Is their a system table somewhere on an informix server that stores the product name. For example 'Select owner from systables where tabname = � VERSION� will return the version of the server. I would like to be able to tell if a server is a Universal server or a Dynamic …
IDS 7.3x on Win2000?
Does Informix Online Dynamic Server 7.3x runs on Windows 2000 (Professional)? Thanks for your help. Guy Dillen…
Re: Maximum Instance
On Tue, 26 Sep 2000, watZki wrote: >Is there a limit on number of DB Instance Online? Not explicitly. Computer resources (CPU, memory, disk) are usually the limiting factors. >Is there a connection w/ my memory? Yes (assuming you're referring to the memory on the computer, ra…
Re: How to search for a string in a TEXT field
Hi, :-( SELECT name, REPLACE(text,"ZNOTREADY","found") AS your_output FROM tablewithtextfield; Blobs are not allowed in this expression. I use Informix Dynamic Server Version 7.31.UC2A…
Informix 7.31 and Windows2000
Somebody has installed it on Windows 2000 ? The Instance Manager can't initialize shared memory.. Thanks in advance. -=SIMO=-…
People Soft and Informix 7.2
Informix DSA 7.2 Platform: Sun SPARC SunOS 5.5.1 4 CPUs Has anyone found it advantages to turn PDQ on with PeopleSoft version 7.01? TIA Cheryl L. Kendricks Sr. Database Analyst H.E. Butts Grocery San Antonio, Texas…
Create user in Informix Dynamic Server
Hello all I`m new in INS. Could you help me? I have Database server with one user Informix. How to create another user to Database?…
Re: DS_MAX_QUERIES & DS_TOTAL _MEMORY parameter
These parameters are used by Informix to determine the amount of resource to allocate for a Parallel Database Query (PDQ) DS_MAX_QUERIES - this specifies the maximum number of PDQ that can be execute at any given time. This parameter is quite subjective based on the number of …
Informix ODS on Win 2000?
Does Informix Dynamic Server V7.31.TC5 for Intel Pentium Windows NT 4 also run on Windows 2000? Thanks for any help. Guy Dillen ITP…
SHMEM_MAGIC on HP
Hi - I'm posting this query for someone that doesn't have access to this newsgroup.. We need to be able to address additional shared memory on our HP V2500 platform. We are running HP_UX 11 64 bit os and 32 bit informix 7.31.UC5. I understand that by using SHMEM_MAGIC, we can a…
Re: SE 7.X installation on WIN98 ignore
Please ignore . I was using wrong protocol Thanks stumbde <stumbde@email.msn.com> wrote in message news:... > I am trying to install SE on Win98. When i run dbaccess i get following > error > when i am trying to connect > Error 25567 Internal communications buffer management err…
SE 7.X installation on WIN98
I am trying to install SE on Win98. When i run dbaccess i get following error when i am trying to connect Error 25567 Internal communications buffer management error detected. This error is usually caused by memory corruption or wrong use of buffer management routines. Make sur…
Informix cost???
Someone can said how much does Informix cost? I need to know: -Informix costs -cost for client Thanks very much. I need the last version of dynamic server for Unix. Ciao, Berna…
PDQ PRIORITY
Hi All, I have IDS 7.3 under Win NT., In the onconfig file I have set the max_pdqpriority=100 and also I have set the environment variable pdqpriority=100, when I see onstat -g mgm it still shows me the max_pdqpriority=0. Can anybody pls.tell me the reason or help me out ? Th…
Replication
Hello everybody. I would like to know if it is possible to replicate an Informix database between a UNIX-based 7.32UC2 Informix Dynamic Server and an linux-based IDS2000 without problems. Thanks in advance. jhernandez@geuropa.com…
RE: Page Size on Solaris (Informix 7.31)
Solaris onlys has an 8K page size on certain architectures, the rest are 4K. Basically the sun4u's are 8 and the sun4m are 4K. The page size wrt to the OS is determined via the hardware abstraction layer which is typically one of the few machine code areas of the kernel and uniq…
PDQ PRIORITY
Hi All, I have IDS 7.3 under Win NT., In the onconfig file I have set the max_pdqpriority=100 and also I have set the environment variable pdqpriority=100, when I see onstat -g mgm it still shows me the max_pdqpriority=0. Can anybody pls.tell me the reason or help me out ? Th…
PDQ on ANSI Databases
Hi All, I've been trying to execute a parallel database query (PDQ) on an ANSI database. But everytime I run onstat -g mgm it doesn't register it as a PDQ and no resources were allocated. I tried doing this on a non-ANSI database and they were no problems. BTW, I am using IDS …
dynamic server with Informix distant database
We have this problem : - write of a html page (this pages will contain many many fields). - Receiving of the page data on a http server based on a M1 machine. - Using of 4gl/informix programs based on the M2 machine with the pages data - 4GL programs will set up a � result � tabl…
HELP! Informix Dynamic Server 7.3
I'm trying to install a new IDS on Linux (RedHat 6.1) on a cooked file. Everything looks right, but upon oninit, I receive the following: oninit: Cannot open chunk '/u1/naf_chunk'. errno = 2 oninit: Fatal error in shared memory initialization Log reflects: 09:11:07 Informi…
UDR Support in Informix Dynamic Server.
Can someone tell me what exact version of Informix Dynamic Server that first supported C User Defined Routines. I've tried searching for this on their website with no joy. (their advanced search doesnt work at all !) Rgds, Peter. Sent via Deja.com http://www.deja.com/ Before y…
Memory problems? Please help.
I'm running data conversion routines on SCO UNIX 5.05 using Informix v7. They used to be executed during a shell script containing abotu 30 programs. However, this was poor for maintenance and distribution so one exe was compiled and the routines seem to get slower and slower as…
OFFICE Connect V.1
Informix Office Connect, Version 1.0, is compatible with the following Informix servers: Informix Dynamic Server, Version 7.3 or later Informix Dynamic Server with Universal Data Option, Version 9.14 Informix Dynamic Server 2000, Version 9.2 or later e Informix-SE 7.23 n�o func…
PDQ question
We have a fragmented table (round robin) in two dbspaces with two detached indexes in a third dbspace. All dbspaces are on different disks. PDQ priority is set to 100, the machine has two processors Selecting all rows (sequential scan) results in 3 Informix threads and evenly d…
System catalogue
Hello! Can anybody explain me how I can create trigger on "informix".systables? (The server I deal with is Informix Online Dynamic Server 7.3.) Max…
Compatability between Informix products
Hi, I need some version compatability information for the following products. Hardware Platform: Hewlett Packard OS Platform: HP-UX version 10.20 Informix s/w: Informix Universal Server 9.20 Informix Dynamic Server 7.31 Informix Gateway to DRDA vers…
ODBC and PDQ
I'm hoping one of you can help me. I want to set up ODBC data sources on NT and 95 client machines such that PDQ is set or not set on a per data source basis. For example, I've got data source X and data source Y. Data source X has PDQPRIORITY unset. Data source Y has PDQPRIO…
informix dynamic server on linux help
Hi all, I am an informix newbie, and i have problems running it on redhat linux 6.0. The installation went just fine, but now when i start dbaccess and try to create a new database i get this error message: 25584: Network driver can not access server program /opt/informix/lib/sq…
Informix Dynamic Server on IBM SSA
Can any one share their experiences, recommendations, pit-falls, comments about creating an IDS db engineOLTP environment on an IBM SSA Raid system? We have 2 SSA adapters and have 4 loops with 4 drives each. The IBM techs for the Smoothstart services will be coming next Tuesday…
Please help me!
Hello! 1, Can somebody give me information, what is the new features for Version 7.24 of Informix Dynamic Server according to Version 7.20 of Informix Dynamic Server? 2, Are Version 7.20 of Informix Dynamic Server and 7.20 INFORMIX-ESQL/C 2000 Year Compatible? 3, W…
Re: installing Informix dynamic server
From: "Joerg_Mauz@abs.org" <Joerg_Mauz@abs.org> > Is there something wrong the the gateway, Hotmail or are there just loads of idiots posting today. (Apart from me, that is! :-) ______________________________________________________ Get Your Private, Free Email at http://www.hot…
Re: IDS PDQ
From: sfcawley <sfcawley@interaccess.com> > >Is PDQ an option that has to be turned on? Is it an option that would be >recommended for an OLTP application (or is it DSS specific functionality)? > >I would like to ensure optimum performance from my production server and >am not s…
IDS PDQ
Is PDQ an option that has to be turned on? Is it an option that would be recommended for an OLTP application (or is it DSS specific functionality)? I would like to ensure optimum performance from my production server and am not sure if PDQ is appropriate in an OLTP environment.…
PDQ
Is PDQ an option that has to be turned on? Is it an option that would be recommended for an OLTP application (or is it DSS specific functionality)? I would like to ensure optimum performance from my production server and am not sure if PDQ is appropriate in an OLTP environment.…
installing Informix dynamic server
hi all, can anybody give me an URL where to find a good description of how to setup and install an Informix Dynamic Server with using RedHat Linux ??? I've searched a whole day but founf nothing useful.. :( thx ind advance joerg…
Help! Cant start database service
Hello All I had my informix dynamic server (7.3) running fine till a few days back. Now the dynamic server service and the informix messenger service won't start automatically and if I try to start the server, it does start but I'm unable to connect to it. If I try to start the…
RE: Informix On-Line 7.24 UC5 Shared Memory Error.
Is there something bogus with Informix 7.2.4? We're having horrible performance problems running 7.2.4UC8 on a Pyramid ES with 512M memory (62M allocated for shared memory.) Another instance is running Informix 7.1.4 on the same OS same memory and only 15m allocated to shared mem…
Informix On-Line 7.24 UC5 Shared Memory Error.
Gurus: Whenever I run a rather simplist SQL query I get an immediate error indicating an "208-Memory Allocation Error". This seems to indicate that the DB doesn't have enough memory to support the query. However, the query is a simple two table sorted SQL UNLOAD that will produc…
Informix On-Line 7.24 UC5 Shared emory Error.
Gurus: Whenever I run a rather simplist SQL query I get an immediate error indicating an "208-Memory Allocation Error". This seems to indicate that the DB doesn't have enough memory to support the query. However, the query is a simple two table sorted SQL UNLOAD that will produc…
Informix Online Dynamic Server DBA Book
Hello Could anyone recommend a good Informix Online Dynamic Server book. I did a search in Amazon.com but I could not decide on which one to choose. Thanks in advance. Ajay…
PDQ
Can anyone offer any rough guidelines for using PDQ? Mainly, what percentage of SHM_VIRT_SIZE should be allocated to DS_TOTAL_MEMORY for DSS? Thanks, Andrew Ford Simplified Telesys 5000 Plaza on the Lake Suite 170 Austin, TX 78746 United States (512) 425-9767…
pricing for informix info?
Hello, Was wondering what other people out there paid for informix dynamic server 7.3... Basically, i wanted to know if they had a web server licensing schem like microsoft. or ibm's db2 (per cpu license). and would the licenses be transferable if I decided to move from le…
Informix Version 7.31 - 208 error
Anyone getting Memory allocation errors - 208 for queries in version 7.31?…
208: Memory allocation failed during query processing.
Hello ! While our developers try to run an SPL procedure they get the following message : 208: Memory allocation failed during query processing. Does someone know where I should look for ?? Thanks in advance D.Henchoz -- #####################################################…
RE: Loading into Shared Memory...
Try SET TABLE table-name MEMORY_RESIDENT Needs to be done by user informix, so best to put it into some startup script for the Informix server, unless you only want it on occassion. HTH Vasudev > -----Original Message----- > From: Marshall Turner [SMTP:t-tech@home.com] > Sent:…
Loading into Shared Memory...
No, you don't have explicit control over what is in the shared memory buffers. Informix manages the buffers based on a 'least recently used' (LRU) scheme that keeps in memory data it expects to be used again and flushes what is not. Marshall <anandpa@my-deja.com> wrote in mess…
How to set pdq in a 4gl? (no manual and online manual doesn't come up!)
how to set pdq in a 4gl? (no manual and online manual doesn't come up!)…
Re: Determining version dynamically
Hi, If you have Informix Dynamic Server then use the following sql-statement ' select DBINFO('version', 'full') from systables where tabid = 1' result from the sql is : Informix Dynamic Server Version 7.30.UC5 Take a look in Informix Guide to SQL: Syntax for more about DBINFO…
KAIO: out of OS resources error
Hi~ My informix dynamic server write "KAIO: out of OS resources error .." in online.log. This error log is written during ontape task. How can I solve this problem? platfom : SunOs 5.5.1 Informix Dynamic Server 7.24 uc6 Thanks.…
64bit IDS for Solaris 7/SPARC ?
Is there a 64bit Informix Dynamic Server 7.3x for Solaris 7/SPARC available? tia, joerg…
Posting from the Informix-list
what is the last version of Informix Dynamic Server for HP-UX 10.20, where can i find more Information about this.…
Latest versions for various Informix products ???
Which are the latest versions for Informix Dynamic Server Informix Dynamic Server, Workgroup Edition Informix 4GL Informix SQL on Solaris 7/SPARC ? Where can I find such informations on Informix's website ? tia, joerg…
cdr command line utility in informix 7.24
Hi, Is there a cdr command line utility in informix dynamic server 7.24? I tried to locate it, but the executable is nowhere to find. Thanks, Lu…
Problem Installing Informix Dynamic Server
I downloaded a Try&Buy version of Informix Dynamic Server V7.30 for NT. I installed it on an NT Server. The install seemed to go ok, but after a short time of investigating IECC, I got a blue screen. After this when I started the Command Center, a task seemed to start, but it w…
Informix Server & the Blue Screen of Death
David Henry <henryd@net-gong.com> wrote in message news:7ld2ud$hvn$1@news2.inter.net.il... > I am running (or trying to) version 7.3 on a 2 CPU Intel box with NT4 > service pack 4. > The machine crashes at random times and in random places, even if there is > no database activity…
sqlexec problem on large join
Hi, On a sql query which does a join across the two database instance I get following error message, Exception: Invalid memory address (dce / thd) 408: Invalid message type received from sqlexec process. The informix version running the two database instances are 5.02 and 4.11…
PDQ & WorkGroup Server 7.3 UC5
Does anyone know if PDQ works in Workgroup server? I cant seem to get more than one thread for a query which uses an index that is fragmented over 3 dbspaces. I have read that PDQ will only generate 1 thread on early versions of WG, but thought that this had changed in 7.3. on…
Shared Memory Size vs Physical Memory Size
Glynnie wrote in message <7kb1o2$kru$1@nnrp1.deja.com>... >Can somebody please explain the pros and cons of increasing either the >initial virtual memory segment or adding a further segment via "onmode - >a" on a machine that is Informix Dynamic Server dedicated. The rule of thu…
Problems starting IDS 7.30.TC7 on Windows NT SP4.
When i try to start informix dynamic Server, the following message appears "Only informix user can start informix dynamic server" this message appears when i logged on with the informix's user. When i try to start the service on the control panel , error 2140 appears.…
Re: Online Config Changes
From: "Carlson@WHSmith" <carlson1@bellsouth.net> > >Not necessarily. The variables can be reconfigured within the ONCONFIG >file while the engine is up; they won't take effect until the engine is >bounced. There's quite a bit of stuff that can be set dynamically. For example, o…
Out of buffer?
Hi, I got the following error message from an Informix IDS 7.30: <<Informix Dynamic Server>>> WARNING! Buffer pool size may cause Dynamic Server to get into a locked state. Recommended minimum buffer pool size is 4 times maximum concurrent user thre…
Re: PC_POOLSIZE
Nick Miles wrote: > > Does anyone know how much memory is being used by the default Procedure > Cache? I'd like to increase the PC_POOLSIZE, but I'd feel more > comfortable knowing exactly what affects this will have. > > I've done some testing with PC_POOLSIZE, and the procedur…
Posting from the Informix-list
Whenever i run following query having 149495 rows in a table - (index is dist_code,fund_code,trans_type) select new_app_prg_code,sum(doc_total) from lppas_tran where trans_type = 'A' and dist_code = 64733 and fund_code = 657 group by 1 order by 1 i receive an error 208 -208 …
Re: Informix and multiple instances
> >The OS is HP-UX 11, 64 bit > >The DB is Informix 7.30 FC 6-1 I'd recommend an upgrade to at least 7.30.FC7 or 7.31...there's a nasty shared memory bug that could cause you immense headaches, especially if the system is managing shared memory segments for multiple instances...…
Linux VS NT4.0
Hi, Is it true that Informix Dynamic Server workgroup edition 7.30 is ported for Linux, and if it is so does anyone can tell me what to chose between Linux and NT4.0 for running Informix Dynamic Server workgroup edition 7.30. Also I'd like to know for which version of Linux, Inf…
Datablade memory management ?'s
We're using the dmi library and I was needing some info on memory management. For exampe, when using mi_next_row do I need to nuke the MI_ROW * that is returned? If so do I use mi_row_free (MI_ROW * row)? Any help would be appreciated. Thanks, Tim…
Re: Tracing ALL sql queries - is it possible?
Except for shared memory and loopback connections. I think it's important to make that clear in your advertising when answering a question like this one. How do you know Michael isn't running a shared memory installation or using stream pipes? > Yes - with ZERO database server…
Re: PDQ
Art, I have PSORT_DBTEMP set to /tmp and that is implemented on physical memory, mounted on swap space.Make it, in this case sense to create mutiple directories, /tmp/psort1, /tmp/psort2,.. and set PSORT_DBTEMP to them. I create four indexes in parallel. Does it speeds up to gi…
RE: PDQ
You want to be careful about dumping huge amounts of data down to /tmp if it is really a memory filesystem. Remember they are major difference between a tmpfs and ufs/vxfs etc. I can bring our E10000 12CPU domain to standstill when generating .5GB file in /tmp Paul Watson …
PDQ
I noticed a performance decrease instead of a performance increase when using PDQ with creating indexes. The create indexes are done one/with: * Informix 7.23.UC6 on Solaria 2.5.1. * System: SUN E4000 with 6 CPU's and 5.3 GB internal memory. * Informix has four CPU, NO…
RESIDENT and PDQ
Can anyone explain what resident = 1 means and what the advantage of setting it is ? More performance ??? What effect does the PDQ-Parameters have ? GREETINGS OLAF…
RE: PDQ
PDQ makes a BIG difference on my sysytems when building indexes. > ---------- > From: Sadagopan, Sathish, CFCTR[SMTP:sadagop0458@att.com] > Sent: Monday, March 22, 1999 10:06 AM > To: informix-list@iiug.org > Subject: RE: PDQ > > The number of scan threads to be used durin…
Re: Re[2]: PDQ
> PDQ has nothing to do with index creation. You can not optimize these kind > of tasks with PDQ resources. Performance degration during index creation > is a consequence of allacation of PDQ resources that is supposed to used > by that process. Actually, PDQ has everything to d…
RE: PDQ
The number of scan threads to be used during the index build and the amount of memory used are affected by PDQ parameters,Aren't they ? Sathish Sadagopan -----Original Message----- From: Yerli, Gursoy [mailto:gursoy.yerli@tmssc.brooks.af.mil] Sent: Monday, March 22, 1999 9:53 A…
RE: PDQ
Albert, PDQ has nothing to do with index creation. You can not optimize these kind of tasks with PDQ resources. Performance degration during index creation is a consequence of allacation of PDQ resources that is supposed to used by that process. You can de-allocate PDQ resource…
Re: PDQ
From: wisse <wisse@kabelfoon.nl> > >I noticed a performance decrease instead of a performance increase when >using PDQ with creating indexes. > >The create indexes are done one/with: > > * Informix 7.23.UC6 on Solaria 2.5.1. > * System: SUN E4000 with 6 CPU's and 5.3 GB inter…
Starting Informix Dynamic Server !
Hi Gurus, Just wondering is there any difference in starting the informix engine as root user versus as Informix user. ? The reason why I ask this question is , the IDS 7.23 UC6 on HP-UX 10.2 crashes due to a bug (declared as bug by Informix Technical support)when we start in…
Informix Dynamic Server Archive/Restore
Hello All: We have a large scale Informix DB resident on an HP 9000, K460, with AutoRaid Disk Subsystem (218gb). And we are running IDS 7.30. Currently, we are using the Informix ontape archive/restore utility to archive the DB and to perform continuous logical logging. We u…
Sort memory
I have a query which I need to run in an OLTP environment, but which seems to tear up the disk where my temporary space is located. Is it possible to assign additional memory to this query for sorting so that it doesn't need the disk space? I've played around with the PDQPRIORI…
Any one know this?
Hi folks: Is there a script that can check informix on-line dynamic server is up and running or not? If not it will e-mail a note to D.B.A. groups Thanks in advance Garry…
Recommended value for SHMMAX
Can anyone recommend a good value for SHMMAX based on the following: We're on HPUX 10.2 with Informix 7.30 with 784MB memory. The current value of SHMMAX on our platform is 67MB. After I bring Informix up, an ipcs -m shows that there's 3 segments for resident memory for a total…
Informix ODBC on Caldera Open Linux
I am attempting to implement a development system on Linux with with the free SE download from Intraware. Using the Intersolv 3 ODBC drivers. I'm getting the errno# -25567 with says: "Internal communications buffer management error detected. Memory corruption or incorrect use o…
converting Informix Online 5.1 esql/c to Dynamic Server esql/c?
Hi converting Informix Online 5.1 esql/c to Dynamic Server esql/c? What is the easiest way to do this? Is there a parser that could do this? edward…
RAID Technolgy
We are using Informix Online Dynamic Server 7.2. We are going in for a new DEC UNIX Server with RAID Technolgy. It incorporates mirroring at the hardware level. So is it not necessary to do mirroring using Informix?. Can anybody give suggestions regarding mirroring and other feat…
Re: Memory Leak
In article <78a8dj$1h7$1@nnrp1.dejanews.com>, joel_anderson@prosolution.com writes >We just installed our first customer with Informix 7.30 TC5 on an NT server. >With only a few users on the system for a few hours, the memory usage on the >Informix server goes from a few meg to o…
Informix on Linux
Does anybody know how much a copy of Informix Dynamic Server would run me for use on Linux?? Thanks in advance -steve…
Leaky Collections?!
Hi Anyone had problems with memory leaks on collection data? I have a table with a LIST(REAL NOT NULL) and each collection is about 90 numbers. If I do... select a from t ; where a is the collection my session memory usage just rockets! For 5000 rows it goes up to nearly 8 M…
Upgrade Dynamic Server 7.13 - 7.24
I need to upgrade Informix Dynamic Server version 7.13 to version 7.24. Can anyone advise of any problems they may have had whilst doing this?…
Informix Dynamic Server 7.31?
Is any information available regarding the release of IDS 7.31 for Unix? We have Sun E3000 and E4000 machines and are experiencing problems with both 7.30.UC3 and 7.30.UC5 and are curious about 7.31. Thanks. Carleen Avant Naval Safety Center Internet < cavant@safecen.navy.mil …
STRING FUNCTIONS
Are there functions for manipulating varchar type, like upper() or lower() in Informix Online Dynamic Server 7.2? Thanks in advance.…
Netscape Enterprise Connection for Informix Dynamic Server
Hi: Does anyone know the procedure for setting up a Netscape Enterprise Server to connect to an Informix Dynamic server on a remote machine? Michael…
oninit: shared library problem
I'm having problems when initialising the DB using oninit. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR…
Initi DB
I'm having problems when initialising the DB. Config: INFORMIX Dynamic Server Ver 7.23, on a UNISYS-UNIX SVR4. When Initializing, I get the error ...dynamic linker: oninit: symbol not found: gettimeofday The LD_LIBRARY_PATH is set to $INFORMIXDIR/bin and �INFORMIXDIR/esql help wo…
Index on Informix Online 7.22 ?
I have installed a new Informix Online Dynamic Server 7.22UC3 on our server (HP-UX 10.20). I find it is much much slower than the Informix 7.12 Online DS server if I do not create index for a same program. Why and what is the difference between the two version of Dynamic serv…
Re: POWER MANAGEMENT FAILS AFTER IFMX INSTALL
David Williams wrote: > > In article <364F133C.67A6B386@deistersoft.com>, V.Salvador <nospam_vsalv > ador@deistersoft.com> writes > >On Solaris 2.6, power management daemon (powerd) fails with shmget > >error, after modifying the /etc/system file as the informix release > >notes …
Re: esqlvers statement.....results are different on 2 DB servers ???
Tim Jones wrote: > > I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 > servers. Let's call them Server A and B. > > Both A and B had a prior ESQL/C versions. > > After the install, logged in as informix userid on A and ran "esqlvers" > and got this : > I…
esqlvers statement.....results are different on 2 DB servers ???
I've installed Informix 7.30UC3 with the ClientSDK 2.01 software on 2 servers. Let's call them Server A and B. Both A and B had a prior ESQL/C versions. After the install, logged in as informix userid on A and ran "esqlvers" and got this : INFORMIX-ESQL Version 7.22.UC1 …
PDQ questions
Hi all. Some questions about de PQD. I have the above producs: Informix ODS Ver 7.24.UC2-1 Informix I4GL Ver 6.05.UD2 This products are running on some Sun platforms with Solaris 2.4 The questions are: a) The ODS Administration manual (Ver 7.2) say in chapter 18: "On…
Informix Dynamic Server Personal Edition
What development apps are known to work with IDS-PE for 95? Infrmx wants to sell me licenses for Dynamic 4gl, esql-c, ddvb for 150usd. Do these work and are there others? 150 sounds ok but the catch is is that the Open-Line Support is outrageous for this (3K usd for unlim. suppor…
Will informix 7.24.uc5 compatiable with solaris 7?
Hi there, I was wondering if Informix Dynamic Server 7.24.uc.5 will be compatiable with solaris 7 when it comes out? Thanks advance, Pat Militzer pmilitzer@ultracom.com…
Informix Online Dynamic Server 7.2.2
When I try to iniailize the shared memory I get an error "oninit: Critical error initializing shared memory" I checked the log and it says the base memory address is 0x80080000 and should be 0x80400000 when I change it it reverses. this is on a SCO open server 5. nay ideas.…
Informix Dynamic Server on Linux NOW!
Check out the Informix WEB Site. There is an announcement that IDS 7.3 is shipping on Linux TODAY! http://www.informix.com/ Art S. Kagel…
Problem installing to NT4.0 server
I'm trying to install Informix dynamic server workgroup edition to Primary domain Nt 4.0 Server. I have created Informix-Admin group and Informix account and grant it all Administrators rights and also Domain administrator rights. The server setup runs ok, but when setup is tryi…
Deployment Licenses of Informix Dynamic Server
I need a free Deployment Licenses of Informix Dynamic Server!…
Re: Informix Dynamic Server blocks
In article <3609EB18.2AB1B1CD@bull.net>, Helmut Leininger <Helmut.Leininger@bull.net> writes >Hi, > >Sporadically, the Informix server seems to block (every try to connect >or onstat times out and no reaction on onmode -ky). In the MSGPATH I >find the following message: > >09:03:…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Informix Dynamic Server blocks
Hi, Sporadically, the Informix server seems to block (every try to connect or onstat times out and no reaction on onmode -ky). In the MSGPATH I find the following message: 09:03:42 mt.c, line 8362, thread 2139, proc id 17096, mt_notifyvp timed out. Informix server is 7.22.UC2…
Re: Dynamically adding shared memory segs
Martin Berns wrote: > Mark D. Stock schrieb: > > > > Martin Berns wrote: > > > > > > Run 'onstat -g ses' and have a look at the 'total memory' column. This may indicate who is using > > > the additional memory. Remember, sessions don't free memory by themselves: So if there is a…
Total memory & used memory in onstat -g ses
The onstat -g ses commands displays total memory and used memory by session. Does anyone know how I can reproduce this display using sysmaster tables? I am trying to determine which host(s) are initiating sessions using larger amounts of memory. This onstat command shows only …
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
On Tue, 28 Jul 1998 14:40:44 -0500, Ben Jazi <bjazi@fallschurch.esys.com> wrote: >What are the major differences between INFORMIX-OnLine Dynamic Server >7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? No, IDS 9.x is the ORDBMS. This autumn the 7.3 and 9.x code lin…
Re: OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
Ben Jazi wrote: > > What are the major differences between INFORMIX-OnLine Dynamic Server > 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? > > Thanks, > Ben I don't know the differences in detail but you could check the following pages, where IDS 7.3 is described …
Re: Need help with informix memory management
Matthias Kuespert wrote: > > Hi, > > we encountered a strange problem using Informix on Sun Solaris 2.5.1: > > If we connect to the DB (via E-SQL-C CONNECT statement) we cannot > allocate more than appr. 7 MB with our application. After that > size malloc() returns a NULL pointer…
Need help with informix memory management
Hi, we encountered a strange problem using Informix on Sun Solaris 2.5.1: If we connect to the DB (via E-SQL-C CONNECT statement) we cannot allocate more than appr. 7 MB with our application. After that size malloc() returns a NULL pointer and errno says: not enough space. If …
OnLine Dynamic Server 7.2 Vs INFORMIX Dynamic Server 7.3
What are the major differences between INFORMIX-OnLine Dynamic Server 7.2 and INFORMIX Dynamic Server 7.3? Is it ORDBMS vs RDMBS? Thanks, Ben…
Informix computer Base classes
Has any body used the Informix computer base training classes. I am wondering if any of the computer based training classes: "Informix Dynamic Server System Administration" or the "Managing and Optimizing Informix Dynamic Server Databases" is good. Thank You…
Re: Informix Online Dynamic Server 7 on Linux
Piet le Roux wrote: > > If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would > be appreciated. > I have installed iBCS and the shared libraries and the binaries work, > except that the engine cannot initialize shared memory: Error message > semctl: errno 22…
Informix Online Dynamic Server 7 on Linux
If anyone has succeeded to run Informix ODS 7 (SCO) on Linux help would be appreciated. I have installed iBCS and the shared libraries and the binaries work, except that the engine cannot initialize shared memory: Error message semctl: errno 22 create_vp: cannot allocat m…
Problems with Informix Dynamic Server for NT
Hi Has anyone tried downloading and running the dynamic server product for NT? I have it installed, but get the following error when I boot the system: AdmAgent.exe - Applicatioin error The instruction at "0x10087c69 referenced memory at "0x00000000". The memory could not be r…
Re: onstat -g ses
>Hi, >In the onstat -g ses output , what is the basis for allocation of 'total >memory' ? >There is also the figure 'used memory' , why not just allocate required >memory ? Well, we could do that but then that would 1) fragment memory and 2) create bottlenecks. Memory in shared…
RE: What are the differences between Informix Dynamic Server
It is confusing! =20 Here's what I know: Prior to renaming: 7.2x =3D ODS 8.0 =3D XPS 9.1 =3D IUS After renaming: 7.2x =3D IDS 8.0 =3D IDS/AD/XP 9.1 =3D IDS/UDO=20 After the 7.3 release: 7.3 =3D IDS 9.1 =3D IDS/UDO After the 8.2 release: 8.0 =3D…
RE: What are the differences between Informix Dynamic Server and
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BDA3AF.9242A58C Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Good quest…
People Soft and Informix 7.2
Informix DSA 7.2 Platform: Sun SPARC SunOS 5.5.1 4 CPUs Has anyone found it advantages to turn PDQ on with PeopleSoft version 7.01? TIA Cheryl L. Kendricks Sr. Database Analyst H.E. Butts Grocery San Antonio, Texas…
Re: Index for Informix Dynamic Server
William Lai wrote: > > Hello, > > We alreay upgrade our database server from SE5.X to IDS 7.3. After we > convert all the old data to the new server, we have some problems on the > index search. For example, a table: > > table : ith ( ithitno, ithname ), total 1,500,000 records…
Re: Index for Informix Dynamic Server
William Lai <rwie@netvigator.com> offerred: +We alreay upgrade our database server from SE5.X to IDS 7.3. After we +convert all the old data to the new server, we have some problems on the +index search. For example, a table: + +table : ith ( ithitno, ithname ), total 1,500,000…
Index for Informix Dynamic Server
Hello, We alreay upgrade our database server from SE5.X to IDS 7.3. After we convert all the old data to the new server, we have some problems on the index search. For example, a table: table : ith ( ithitno, ithname ), total 1,500,000 records index : ith_1 on ithitno, ithn…
Re: Running Informix and Oracle on the same Unix box
Last time we tried to that we ran into tough waters and had to abort. The two engines need different kernel parameters, and they also have memory conflicts. Most importantly, find out if you'll be able to tech support from either one of them in this kind of a situation :-) (more…
Running Informix and Oracle on the same Unix box
Folks -- For various and sundry reasons, we're going to try to run both an Informix instance and an Oracle instance on the same AIX 4.3 box. We'll be running Informix 7.3, and Oracle 7.2.2.3. Are there any gotchas that we should know about? My guess is that the biggest pro…
Connect to Informix 7.2
Hello! I'm attempting to connect to an Informix 7.2 backend. I loaded the INET stuff but my profile generates a -25567 error which translates to: -Internal communications buffer management error detected. -Memory corruption or incorrect use of buffer-management routines usually…
Re: Threaded Process
klow@avnisoft-dal.com wrote: > > Given a process with two threads, each with their own "active" > connection to the same database make different select queries > concurrently, will the queries be executed and acted upon concurrently > by the server? Or will the first thread to su…
Informix Dynamic Server 7.3
Hello, Since I'm planning a Data Warehouse, I would to do it with the new version of Dynamic Server. Impressions, stability and on which platform? Regards. Fernando _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Fernando Collalti Phone: +…
Informix PDQ & PeopSoft
We are running peopleSoft Finanacials and Informix Dynamic Server 7.2x. In IDS 7.2x, you can no longer turn on PDQ at the instance level, so we are trying to turn on PDQ at the environment level for our batched reporting jobs. Since all of our PeopleSoft users are untimate…
Informix PDQ & PeoplSoft Financials
I�m an Informix DBA, and we are running PeopSoft Financials 6.x and Informix Dynamic Server 7.2. I would like to turn on Informix�s PDQ feature to speed up some of our nightly batch jobs, but to do so, I need to set the PDQPRIORITY environment variable. Since all of our users…
Informix Dynamic Server & Text columns
Hi everybody, Can you help me ? I've created a table with the following structure : column type -------- ---- code smallint obs text How can I insert into this table with Java program ? I'm using Informix Java AP…
Re: Goodbye to compiling and linking. Every Database guy must know this!
What color do you want your database to be? ;) Ping Liu wrote: > Are there any degugging tools available for perl? > > gold_bag@yahoo.com wrote in article <352BCE60.53BF@yahoo.com>... > > I hope this helps the software professionals/managers like you.... > > > > Computer speed…
Re: Goodbye to compiling and linking. Every Database guy must know this!
Are there any degugging tools available for perl? gold_bag@yahoo.com wrote in article <352BCE60.53BF@yahoo.com>... > I hope this helps the software professionals/managers like you.... > > Computer speeds are doubling every 4 months, hence it makes sense to > program in scripting…
Re: "Changing Data structure...."
On 9 Apr 98 at 16:58, Steve Romankiw wrote: > When doing an onstat, we often see "Changing data structure forced...". > What causes this message to display? Is shared memory changing? It's probably something like a new chunk of Virtual Memory being added. HTH. -- Ciao, Bil…
Intermittent Problem - error 529 Cannot attach to transaction
We have a HP-UX box (Ver 10.20) running Informix Online Dynamic Server Ver 7.13 and a NT Server (NT4.0) running Informix Online Dynamic Server Ver 7.23. We are trying to access some of the database tables resided in the HP-UX box from the NT Server via synonyms. But we faced inte…
Metacube & PDQ
When a user logs into Metacube several queries are run to verify a valid user and download table and filter definitions. Because of our configuration file PDQPRIORITY setting (90) these queries are considered under the domain of the Memory Grant Manager (MGM). This is ok except…
How can I read the header tape of the archive created by ontape?
I have Informix Dynamic Server 7.23.UC1. I would like know the tape header structure created by ontape.…
Re: A question on shared memory usage
In article <34DF0E07.32C6@bloomberg.com>, Art S. Kagel <kagel@bloomberg.com> writes >com@netinfo.moldova.net wrote: >> >> Hello, >> >> In article <34dcff94.500279443@10.209.30.200>, >> jharris@westpac.com.au wrote: >> > >> > Octav, >> > >> > Once Infomrix allocates a shared mem…
Re: Upgrading Informix from Online engine to Dynamic Server
Seth Grimes wrote: > > Jane Vohden wrote: > > > > I have been talking with Informix about upgrading our site from the > > 5.xx Online engine to 7.2x Dynamic Server. They said there was no cost > > I don't think that anyone has pointed out the mistaken terminology > h…
Re: Performance question
I apologize for not sending the onconfig parameters. SHMTOTAL 768000 SHMVIRTSIZE 348000 DS_TOTAL_MEMORY 614000 DS_MAX_SCANS 1000 MAX_PDQPRIORITY 60 DS_MAX_QUERIES 8 OPTCOMPIND 2 Willie L. Meeks <wmeeks@harrahs.com> wrote in article <01bcefc3$7f535480$57011814@willie>... > I ha…
What's the difference between ODS 7.22 and 7.23?
What's the difference between Informix Online Dynamic Server version 7.22 and version 7.23? Thanks in advance. Bill Westphal Rodney District Council mis@rodney.govt.nz…
ODBC unix and dynamic SQL
Hi, Can someone give me some help on using informix odbc drivers (unix) with dynamic SQL on Informix-online dynamic server (7.22 unix) when I use "SQLprepare" I receive the message "too many or too few host variables given" but I think all is Ok R. Gueye…
Re: Session memory grows a lot
Are you closing your cursors and freeing your queries? Also, if you're using stored procedures from within I4GL programs, there's a known memory leak, that I don't think is fixed in 7.23. We had similar problems when accessing via Netscape LiveWire. Make sure that your program…
Re: Informix vs. Sybase vs. Oracle vs. (gasp) MS SQL Server
In article <yuten3wab3j.fsf@mew.corp.sgi.com>, Pablo Sanchez <pablo@sgi.com> writes >>>>>> "David" == David Williams <djw@smooth1.demon.co.uk> writes: >David> >David> The latency would be different? > >Sure, the respective lock managers need to deal with >different issues due t…
Re: DS_TOTAL_MEMORY configuration
>We are trying to configure our instance of Informix ODS 7.23 to support >pdq. Using the default DSS parameters (DS_TOTAL_MEMORY and DS_MAX_QUERIES >are blank), we get 208 errors when running queries with aggregate >functions and PDQPRIORITY>1. > >Our first guess was to increase …
Informix CLI & NT
Hi, I'm running NT4, IIS3, service pack 3 & Informix CLI 2.5. Service pack 3 upgrades the ODBC manager to v3 but when you Install Informix CLI 2.5 it then downgrades it to a lesser version which in turn breaks all the ASP & ODBC capabilities on the web server. If I re-install …
Re: Performance question
Try increasing the DS_TOTAL_MEMORY to a bigger number , depending on your queries , assign 50 or 100 MB and see the difference. Willie L. Meeks wrote in message <01bcefc3$7f535480$57011814@willie>... >I have a question related to PDQ. Can any one explain to me why when you >run…
Re: Performance question
Willie L. Meeks wrote: > > I have a question related to PDQ. Can any one explain to me why when you > run a query with PDQ enabled it appears that your cpu vp's don't work as > hard. PDQ will only buy you much of anything if you have your data fragmented. Have you taken a look…
Performance question
I have a question related to PDQ. Can any one explain to me why when you run a query with PDQ enabled it appears that your cpu vp's don't work as hard. It appears to me from the results I have observed from my DSS system that if I excute 50 without PDQ enabled the box works har…
RE: NewEra 3 Memory leak?
We had the same problem. Fortunately, we have a connection manager class that we can call to connect and disconnect from the database. By doing this, we release the connection and the memory. We tried disconnecting after 3 transactions and found that the average amount of memo…
Next Extent Calc.
Hi, I have INFORMIX-OnLine Dynamic Server Version 7.14.UD2. Does anyone know of a script or program to calculate the next extent size ? Thanks in advance Manuel…
RE: Error with ODBC drivers
Alberto, Believe it or not, simply go to SETNET and redefine everything, it should fix your problem assuming you have configured your communication properly ( the type of connections, server name user and password correctly ) . Regards, Mario Estrada =============Reply Separa…
Error with ODBC drivers
Hi, trying to connect with ODBC drivers to a SE on Windows 95 I get the following error message: -25567 Internal communications buffer management error detected. This error is usually caused by memory corruption or wrong use of buffer management routines. Make sure there is no…
PDQ Not working
Greatings, I just received DSA 7.22.UC2 on HP-UX 10.20, and am unable to get it to satisfy a Query using PDQ. When I run the same query with 7.11, it works fine. The output of 'onstat -g mgm' shows that no querys have run with PDQ on the 7.22 engine. PDQPRIORITY is set at 30,…
Re: FREE (cursor)
The shared memory that is being used is on the server side. This is the issue with later INET drivers. The default behavior is to NOT free up memory. If you program is not going to hang around very long, then it is not an issue. -d At 12:39 AM 8/19/97 +0000, SaTriGuy wrote: …
Re: Informix OWS Memory Leak
On 18 Aug 97 at 12:18, Franck Leveneur wrote: > I seems like OWS eats up all the memory. I found a patch from > Netscape to fix that but it's doing it. Check your setting for maximum memory allocation in the onconfig file. If it's set to 0 (zero), OnLine can try to take up all …
Java and Informix Dynamic Server 7.x
Hi friends! I am trying to do server-side java cgi programming to connect to I-ODS 7.x. Do you know how I can do that? I heard it is possible to use the jdbc-odbc bridge( intersolve or openlink's), but the performance is too slow, because of jdbc to odbc and odbc to jdbc convert…
Re: onmode -F
In article <33A6805F.167E@uk.ibm.com>, Daniel Williams <danny@uk.ibm.com> writes >Zeljan Silje wrote: >> >> Hi, >> >> in "Performance Guide Version 7.2" I found recommandation to run onmode >> -F using cron facility. >> Does anyone has experience with this, and how often should I…
Advantages of Dynamic Server 7 over Workgroup Server 7
I understand the main difference between Workgroup Server V7 and On-line Dynamic Server V7 is PDQ. I thought I heard somewhere WGS does not scale above 2 CPU's. Does anyone know of any other reasons for buying ODS over WGS ? Thanks in advance. Steve Gould…
*** 4gl runtime error please help ***
SCO Unix Release = 3.2v5.0.0, RSAM Version 5.07.UC1,INFORMIX-4GL Version 4.10.UC2 I'm getting the folowing error in a 4GL program, it is driving me crazy and I can't get rid of it. Any ideas? Please also reply by email. Thank you ! Program error at "x.4gl", line number 4516. S…
Re: HELP !!!!!
In reply to Igor Andjelkovic's email about HELP !!!!!, on 1 May 97 Hi Igor, > I have a two error messages before my 4GL starts up > Actually , it is only one. > tbmode: forced-resident shared memory error > tbmode: shmctl: errno = 1. > > Please if anybody can help me out, k…
Re: Informix and PDQ
In article <5jue9j$p30$1@news7.gte.net>, Paul Drake <pdrake1@gte.net> writes > >> I assumed that since for most of our queries we see almost no speed >> increase from a setting of 5 to 40, we could run 20 queries at 5. Nope, >> no show. Informix recomends sending one query at a…
Re: Informix and PDQ
> I assumed that since for most of our queries we see almost no speed > increase from a setting of 5 to 40, we could run 20 queries at 5. Nope, > no show. Informix recomends sending one query at a time throught the > engine at PDQ 100. It seems that multiple queries really fre…
Re: Shared Memory allocation error
In message <8525647D.0065C7E6.00@gty02.homedepot.com>, Kate_Tomchik@HomeDepot.COM writes } } } } }Why does setting OPTCOMIND to 2 use more memory? } } OPTCOMPIND = 2 lets the optimizer deciede the best query path by cost alone and these costs are often wrong. It tends to do se…
Re: Shared Memory allocation error
<SNIP> > I am having a problem with online ver 7.10.UD1 running on AIX 4.1.4.0. > When I run a query on a view that joins many tables online begins > allocating additional shared memory until it hits an illegal address. <SNIP> > SHMVIRTSIZE 8000 # initial virtual…
Shared Memory allocation error
All: I am having a problem with online ver 7.10.UD1 running on AIX 4.1.4.0. When I run a query on a view that joins many tables online begins allocating additional shared memory until it hits an illegal address. At this time the query hangs but the engine stays up. If anyone c…
Re: Informix and PDQ
Just a comment. I'd suggest that anyone that is thinking of starting to turn on PDQ initially simply set PDQ to 1. This will turn on parallel scanning for fragmented tables but will not cause programs to gate in the memory manager. In many cases, simply allowing parallel scann…
Informix and PDQ
( still trying to post to Usenet after all these weeks . . .) Hopefully, this message will get through . . . I am the DBA of a small Informix shop in Atlanta, GA. We have been operational under Informix 7.13.UC1 for well over a year. The system appears to be tuned well. I wou…
Re: Informix -208 error
In article <331733be.39980879@gate.idg.no>, Nils Myklebust <Nils.Myklebust@idg.no> writes >Tim McCrea <tim@mccltd.demon.co.uk> wrote: > >:Hi, >: >:Hopefully there is an Informix magician out there who can help me cos >:I'm stuck big style!! >: >:We consistently get an error (-208…
Re: Online V7 and Parallel Queries
> > Is it true that PDQ, parallel queries in OnLine V7.x will use both > primary chunks and mirror chunks to retrieve data concurrently when > performing a query expected to return large volumes of data??? > It is true Michael Strother…
Re: Informix 7.13 "eating" memory
In article <32844747.22509345@www.weideneder.de>, Stefan Weideneder <stefan@www.weideneder.de> writes > >What I know is, that Informix has two different memory management >routines in the OnLine Server. The one which manages the virtual >portion ( 8KB blocks ) and another one for…
Re[2]: Multiple Residency / Multiple Processors
Thanks Kate, that gives me a starting point. Some others have expressed interest in what I find, so I'll post my results in a couple of months. ______________________________ Reply Separator _________________________________ Subject: Re: Multiple Residency / Mult…
Re: Multiple Residency / Multiple Processors
Each server sees the CPUs separate from the other configs, SO you can make all three environments (3) CPU machines. PDQ is a separate issue. You may want to turn off PDQ on the large machine, and turn it on for the other two, since PDQ jobs always have a lower priority than non…
Re: Informix 7.13 "eating" memory
Paul Leskinen wrote: > > I was hoping that someone out there has encountered this problem: > > We have an online transaction-processing application that stays resident > and processes financial transactions using Informix. The problem is that > Informix Online keeps allocating m…
Re: Shared Memory Not released
>Brian Li <cphdcbl@ted.cs.depaul.edu> wrote in article ><511nel$aft@shrike.depaul.edu>... >> >> Dear Informix experts, >> >> We are currently have Informix Dynamic Online running on our HP T500 >machine >> and recently have shared memory problem which is only known to be solved …
Re: PDQ on 7.12
: }From: barryleb@atl.mindspring.com[SMTP:barryleb@atl.mindspring.com] : }Sent: Wednesday, August 07, 1996 3:20 PM : }To: informix-list@rmy.emory.edu : }Subject: Re: PDQ on 7.12 : } : }TASHKOP@kiwi.co.nz (Peter Tashkoff) wrote: : } : }>Morning all : }>We are considering enabl…
Re: PDQ on 7.12
>} >We are running 712UC2, on a dual proc. HP model K w/512MB RAM. What a >nightmare. PDQ is useless, and OPTCOMPIND is turned off. If we edit a >table structure while someone is in the table, we crash the database, How can you do this when someone is in the table, it should …
RE: PDQ on 7.12
}---------- }From: barryleb@atl.mindspring.com[SMTP:barryleb@atl.mindspring.com] }Sent: Wednesday, August 07, 1996 3:20 PM }To: informix-list@rmy.emory.edu }Subject: Re: PDQ on 7.12 } }TASHKOP@kiwi.co.nz (Peter Tashkoff) wrote: } }>Morning all }>We are considering enabling PD…
Re: PDQ on 7.12
TASHKOP@kiwi.co.nz (Peter Tashkoff) wrote: >Morning all >We are considering enabling PDQ on DSA >7.12/Solaris 2.4. >We had previously disabled this facility due to the >bug in 7.10 where it didn't handle the lower level >threads. >So... we are seeking comfort from people that mi…
PDQ on 7.12
Morning all We are considering enabling PDQ on DSA 7.12/Solaris 2.4. We had previously disabled this facility due to the bug in 7.10 where it didn't handle the lower level threads. So... we are seeking comfort from people that might already be running PDQ enabled over 7.12 or lat…
Informix Certified Professional Program Update
Informix offers two certification paths. Each path requires the successful completion of two exams. Each exam is US $250 and is between 60-90 minutes long. * Database Specialist for INFORMIX-OnLine Dynamic Server 7.x 111 - Database Fundamentals Exam 112 - Managin…
Re: Blobs n ESQL/C for Windows
In article <4l6oi7$c20@news2.delphi.com> TYNEELY@news.delphi.com (TYNEELY@DELPHI.COM) writes: >cse@wetware.com (Scott Ellard) writes: > >>In article <4l2l2j$s5m@news2.delphi.com> TYNEELY@news.delphi.com (TYNEELY@DELPHI.COM) writes: >>>I have a WFW 3.11 app that read/writes BLOBS …
Re: mt.shmpool PANIC
rasto, it helps to post a little background info, to even say that you don't know what specifically was going on when this happened if this was the case. this could be caused by any number of a million things, so with no background info, all one can say is that there was a poss…
PDQ on 7.10 single processor engine - FYI
In my zeal to set up PDQ on my single proccess cpu machine to prepare for my multiple processor machine (yeah I got more then one machine to support) in a UNIX AIX 4.1.3 environment. I set the configuration values for PDQ even though I identified to the engine via the MULTIPROCE…
PDQ parameters in OnLine 7.11
Has anybody any experience with using PDQ in OnLine 7.11? I heard that sometimes they can give error -208 when running SQL queries. Moreover, on my platform (ICL Sparc server) the PDQ parameters put through "onmonitor" are incorrectly written in the $ONCONFIG file eg. the value …
Re: realloc equivalent in C++
se4pm@dmu.ac.uk (Piers Myers) wrote: >In article <311BDA8A.1462@ctp.com>, Ian Flint (iflin@ctp.com) writes: >> Honbo Zhou wrote: >> > >> > Is there anything in C++ equvalent to realloc in C which can be used >> > to increase allocated memory? Can't find this even in C++ books wh…
Re: realloc equivalent in C++
In article <4fgir1$pri@theory.tc.cornell.edu>, Honbo Zhou <hzhou@r26n05.tc.cornell.edu> wrote: >Is there anything in C++ equvalent to realloc in C which can be used >to increase allocated memory? Can't find this even in C++ books which >talk about memory management specifically. …
Re: realloc equivalent in C++
In article <311BDA8A.1462@ctp.com>, Ian Flint (iflin@ctp.com) writes: > Honbo Zhou wrote: > > > > Is there anything in C++ equvalent to realloc in C which can be used > > to increase allocated memory? Can't find this even in C++ books which > > talk about memory management specif…
Re: realloc equivalent in C++
In article <4fgir1$pri@theory.tc.cornell.edu> hzhou@r26n05.tc.cornell.edu (Honbo Zhou) writes: Is there anything in C++ equvalent to realloc in C which can be used to increase allocated memory? Can't find this even in C++ books which talk about memory management specifi…
Re: realloc equivalent in C++
hzhou@r26n05.tc.cornell.edu (Honbo Zhou) wrote: >Is there anything in C++ equvalent to realloc in C which can be used >to increase allocated memory? Can't find this even in C++ books which >talk about memory management specifically. Thanks. Honbo If you "malloc" in C++, you can …
Re: realloc equivalent in C++
Honbo Zhou wrote: > > Is there anything in C++ equvalent to realloc in C which can be used > to increase allocated memory? Can't find this even in C++ books which > talk about memory management specifically. Thanks. Honbo Yes. realloc. - Ian Flint…
realloc equivalent in C++
Is there anything in C++ equvalent to realloc in C which can be used to increase allocated memory? Can't find this even in C++ books which talk about memory management specifically. Thanks. Honbo…
Problem using PDQ with Online 7.1
Has anyone had any problems using PDQ and Online 7.1, especially with regard to the PDQ PRIORITY variable being ignored. i.e. all queries passing through the memory grant manager. Thanks in advance Brian Davies Lintel Software Consultancy Ltd, Chester, England.…
SE & File System AIX
I run isql on aix 3.2.5 with 17 file systems. The Database-Select action cannot work. ( the message: 208: Memory allocation failed during query processing ). But the Database-Create action is correct to work. Any suggestion to it ? Informix SE has limit about UNIX file system…
Re: INFORMIX-Online Dynamic Server intallation
copy the standard onconfig file and make as few changes as possible to the different parameters. after you are sure you can bring informix online, should you begin to make changes to the onconfig parameters. Use ONMONITOR to make the changes. It will protect you from many mista…
INFORMIX-Online Dynamic Server intallation
I'm about to install INFORMIX-Online Dynamic Server V.7.1 on a SPARC 1000. Has anyone installed this database on a sparc before? If yes...do you have any suggestions or could you give me any advice on certain aspects of the installation you felt might be important to take notice?…
filemakerpro & images??? If not what???
How well does filemaker pro handle records that include a image? I know that each file is limited to 32 megs. Since scans tend to hog memory it seems to me that this memory constraint would be a problem. I work for a company that has a library of about 5000 images that we would l…
7.1 - Unable to free unused shared memory
If anyone has struck and/or resolved the following problem then any advice that could be offered would be appreciated. Environment: Sparc1000 running 7.1 DSA. 512 Meg Ram. Not a dedicated Informix Server. Problem1: When physical ram (as opposed to swap) gets down to near zer…
Online/Optical
Hello, I'm running into some problems while configuring Online/Optical Version 5.0. It is running in conjunction with Plexus Storage Manager and a SONY jukebox. When I attempt to load a TEXT column into the optical storage I always get the following: 600: Cannot create blob.…
I-NET problem
I have some connecting questions for use of INFORMIX-NET and Powerviewer using TCP/IP. Will FTP's OnNet 1.1 PC/TCP work with INET-PC? If not, are there any '100% dll' or VxD TCP/IP packages supported for connection to INFORMIX on UNIX? -my concern here is memory management ...u…
Re: Optimem Error
paulw@dev.jcdc.eta.gov wrote: : According to the people we talked to at Informix, the invalid memory : pointer error is a known bug. We get it after we execute a PIF file to : run some DOS commands we need. Do you have details of the bug?? Such as bug number, patch/fix, and a …
Optimem Error
One of my friend recently ran into the following error while using 4GL/Win. The message he got was: Invalid memory pool passed to Optimem Library After pressing the OK button a few times, Windows hung, and the application have to be exit(ed) abnormally. He has also encountere…
Re: query plan
In <2thui0INN84u@phage.cshl.org> lombardi@cshl.org (Diane Lombardi in Beach Lab) writes: | I am trying to improve the performance of a particular | query. I am using Sybase sql server v4.9.2. | I noticed that the first time I execute the query | the performance is a little s…
Size of SQLExec
After years of using an informix database, I noticed for the first time that the sqlexec's use of memory (virtual memory) keeps growing with every select until you quit the program. In other words, it is theoretically possible to use all the resources of the machine if you keep …
On-line engine startup failure
Is the machine a sparc running sunos 4.1.2? If so, then you need to force shared memory to be resident. Took me ages to work that one out :-) ----------------------------------------------------------------------------- Steve Lacey, IS Engineering Manager, The Bishop's Manor,…
Error 208 - Memory Allocation
Environment: 4GL - 4.10.UD1 OnLine - 5.00.UC3 Sparcstation IPX, SunOS 4.1.3 When I try to run an application (that ran fine under 2.10.03 :-( ) I get: #208 - Memory allocation failed during query processing. Finderr says to talk to the system administrator, but I talk to mys…
Re: How to setup Datalink under Windows
In <MTan.43@uci.edu> MTan@uci.edu (Mary Tan) writes: > Anyone out there using Datalink 1.1, I-NET driver version 1.01 and >Windows? > Have you got thrown out to the c:\\> after selecting LOG ON in the It took me quite a while to get the DOS Wingz working after finding t…
Macintosh memory management
The external functions that I'm loading require more memory than is available from the stack ( usaully limited to about 2-4 K, with an absolute max of 16k). I'm using MPW C on a Mac IIci with 16M, Wingz ver 1.1, Finder 6.0.5, Multi Finder 6.1b9 There is no relevant documemtaion…